[ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection

Patch from Andrew Victor

On the Atmel AT91RM9200-DK and -EK boards, a pin is used to control
whether the card socket is used for a DataFlash Card or an MMC/SD card.

We now default to MMC/SD in the configuration files.

(This version of the patch can be applied before Patch 3392/1)
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/configs/at91rm9200dk_defconfig

@@ -379,7 +379,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_AT91_DATAFLASH=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
 
 #
 # NAND Flash Device Drivers

arch/arm/configs/at91rm9200ek_defconfig

@@ -370,7 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_AT91_DATAFLASH=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
 
 #
 # NAND Flash Device Drivers

arch/arm/mach-at91rm9200/board-dk.c

@@ -121,9 +121,14 @@ static void __init dk_board_init(void)
 	at91_add_device_udc(&dk_udc_data);
 	/* Compact Flash */
 	at91_add_device_cf(&dk_cf_data);
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+	at91_set_gpio_output(AT91_PIN_PB7, 0);
+#else
 	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
+	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(&dk_mmc_data);
+#endif
 	/* VGA */
 //	dk_add_device_video();
 }

arch/arm/mach-at91rm9200/board-ek.c

@@ -114,9 +114,14 @@ static void __init ek_board_init(void)
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&ek_udc_data);
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+	at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
 	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
+	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(&ek_mmc_data);
+#endif
 	/* VGA */
 //	ek_add_device_video();
 }