ath10k: add log level configuration for fw_dbglog

Introduce an optional log level configuration for the existing debugfs fw_dbglog file. It
allows users to configure the desired log level for firmware dbglog messages.

To configure log level as WARN:

echo 0xffffffff  2 > /sys/kernel/debug/ieee80211/phy0/ath10k/fw_dbglog

The values are:

VERBOSE		0
INFO		1
WARN		2
ERR		3
Signed-off-by: NSenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.h

@@ -350,6 +350,7 @@ struct ath10k_debug {
 
 	/* protected by conf_mutex */
 	u32 fw_dbglog_mask;
+	u32 fw_dbglog_level;
 	u32 pktlog_filter;
 	u32 reg_addr;
 	u32 nf_cal_period;

drivers/net/wireless/ath/ath10k/debug.c

@@ -1318,10 +1318,10 @@ static ssize_t ath10k_read_fw_dbglog(struct file *file,
 {
 	struct ath10k *ar = file->private_data;
 	unsigned int len;
-	char buf[32];
+	char buf[64];
 
-	len = scnprintf(buf, sizeof(buf), "0x%08x\n",
-			ar->debug.fw_dbglog_mask);
+	len = scnprintf(buf, sizeof(buf), "0x%08x %u\n",
+			ar->debug.fw_dbglog_mask, ar->debug.fw_dbglog_level);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
@@ -1331,19 +1331,32 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file,
 				      size_t count, loff_t *ppos)
 {
 	struct ath10k *ar = file->private_data;
-	unsigned long mask;
 	int ret;
+	char buf[64];
+	unsigned int log_level, mask;
 
-	ret = kstrtoul_from_user(user_buf, count, 0, &mask);
-	if (ret)
-		return ret;
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = 0;
+
+	ret = sscanf(buf, "%x %u", &mask, &log_level);
+
+	if (!ret)
+		return -EINVAL;
+
+	if (ret == 1)
+		/* default if user did not specify */
+		log_level = ATH10K_DBGLOG_LEVEL_WARN;
 
 	mutex_lock(&ar->conf_mutex);
 
 	ar->debug.fw_dbglog_mask = mask;
+	ar->debug.fw_dbglog_level = log_level;
 
 	if (ar->state == ATH10K_STATE_ON) {
-		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
+					    ar->debug.fw_dbglog_level);
 		if (ret) {
 			ath10k_warn(ar, "dbglog cfg failed from debugfs: %d\n",
 				    ret);
@@ -1685,7 +1698,8 @@ int ath10k_debug_start(struct ath10k *ar)
 			    ret);
 
 	if (ar->debug.fw_dbglog_mask) {
-		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
+					    ATH10K_DBGLOG_LEVEL_WARN);
 		if (ret)
 			/* not serious */
 			ath10k_warn(ar, "failed to enable dbglog during start: %d",

drivers/net/wireless/ath/ath10k/wmi-ops.h

@@ -116,7 +116,8 @@ struct wmi_ops {
 					     enum wmi_force_fw_hang_type type,
 					     u32 delay_ms);
 	struct sk_buff *(*gen_mgmt_tx)(struct ath10k *ar, struct sk_buff *skb);
-	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u32 module_enable);
+	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u32 module_enable,
+					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
 	struct sk_buff *(*gen_pktlog_disable)(struct ath10k *ar);
 	struct sk_buff *(*gen_pdev_set_quiet_mode)(struct ath10k *ar,
@@ -846,14 +847,14 @@ ath10k_wmi_force_fw_hang(struct ath10k *ar,
 }
 
 static inline int
-ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable, u32 log_level)
 {
 	struct sk_buff *skb;
 
 	if (!ar->wmi.ops->gen_dbglog_cfg)
 		return -EOPNOTSUPP;
 
-	skb = ar->wmi.ops->gen_dbglog_cfg(ar, module_enable);
+	skb = ar->wmi.ops->gen_dbglog_cfg(ar, module_enable, log_level);
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);
 

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -2126,8 +2126,8 @@ ath10k_wmi_tlv_op_gen_force_fw_hang(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_tlv_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
-{
+ath10k_wmi_tlv_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable,
+				 u32 log_level) {
 	struct wmi_tlv_dbglog_cmd *cmd;
 	struct wmi_tlv *tlv;
 	struct sk_buff *skb;

drivers/net/wireless/ath/ath10k/wmi.c

@@ -4991,7 +4991,8 @@ ath10k_wmi_op_gen_force_fw_hang(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable,
+			     u32 log_level)
 {
 	struct wmi_dbglog_cfg_cmd *cmd;
 	struct sk_buff *skb;
@@ -5004,7 +5005,7 @@ ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
 	cmd = (struct wmi_dbglog_cfg_cmd *)skb->data;
 
 	if (module_enable) {
-		cfg = SM(ATH10K_DBGLOG_LEVEL_VERBOSE,
+		cfg = SM(log_level,
 			 ATH10K_DBGLOG_CFG_LOG_LVL);
 	} else {
 		/* set back defaults, all modules with WARN level */