提交 45d3abcb 编写于 作者: B Boaz Harrosh

exofs: Move layout related members to a layout structure

* Abstract away those members in exofs_sb_info that are related/needed
  by a layout into a new exofs_layout structure. Embed it in exofs_sb_info.

* At exofs_io_state receive/keep a pointer to an exofs_layout. No need for
  an exofs_sb_info pointer, all we need is at exofs_layout.

* Change any usage of above exofs_sb_info members to their new name.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
上级 22ddc556
......@@ -55,12 +55,18 @@
/* u64 has problems with printk this will cast it to unsigned long long */
#define _LLU(x) (unsigned long long)(x)
struct exofs_layout {
osd_id s_pid; /* partition ID of file system*/
unsigned s_numdevs; /* Num of devices in array */
struct osd_dev *s_ods[0]; /* Variable length */
};
/*
* our extension to the in-memory superblock
*/
struct exofs_sb_info {
struct exofs_fscb s_fscb; /* Written often, pre-allocate*/
osd_id s_pid; /* partition ID of file system*/
int s_timeout; /* timeout for OSD operations */
uint64_t s_nextid; /* highest object ID used */
uint32_t s_numfiles; /* number of files on fs */
......@@ -69,9 +75,14 @@ struct exofs_sb_info {
atomic_t s_curr_pending; /* number of pending commands */
uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */
struct pnfs_osd_data_map data_map; /* Default raid to use */
unsigned s_numdevs; /* Num of devices in array */
struct osd_dev *s_ods[1]; /* Variable length, minimum 1 */
struct pnfs_osd_data_map data_map; /* Default raid to use
* FIXME: Needed ?
*/
/* struct exofs_layout dir_layout;*/ /* Default dir layout */
struct exofs_layout layout; /* Default files layout,
* contains the variable osd_dev
* array. Keep last */
struct osd_dev *_min_one_dev[1]; /* Place holder for one dev */
};
/*
......@@ -101,7 +112,7 @@ struct exofs_io_state {
void *private;
exofs_io_done_fn done;
struct exofs_sb_info *sbi;
struct exofs_layout *layout;
struct osd_obj_id obj;
u8 *cred;
......@@ -189,7 +200,8 @@ void exofs_make_credential(u8 cred_a[OSD_CAP_LEN],
int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj,
u64 offset, void *p, unsigned length);
int exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios);
int exofs_get_io_state(struct exofs_layout *layout,
struct exofs_io_state **ios);
void exofs_put_io_state(struct exofs_io_state *ios);
int exofs_check_io(struct exofs_io_state *ios, u64 *resid);
......
......@@ -65,7 +65,7 @@ static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
/* Create master bios on first Q, later on cloning, each clone will be
* allocated on it's destination Q
*/
pcol->req_q = osd_request_queue(sbi->s_ods[0]);
pcol->req_q = osd_request_queue(sbi->layout.s_ods[0]);
pcol->inode = inode;
pcol->expected_pages = expected_pages;
......@@ -99,7 +99,7 @@ static int pcol_try_alloc(struct page_collect *pcol)
BIO_MAX_PAGES_KMALLOC);
if (!pcol->ios) { /* First time allocate io_state */
int ret = exofs_get_io_state(pcol->sbi, &pcol->ios);
int ret = exofs_get_io_state(&pcol->sbi->layout, &pcol->ios);
if (ret)
return ret;
......@@ -872,7 +872,7 @@ static int exofs_get_inode(struct super_block *sb, struct exofs_i_info *oi,
int ret;
*obj_size = ~0;
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret)) {
EXOFS_ERR("%s: exofs_get_io_state failed.\n", __func__);
return ret;
......@@ -1043,7 +1043,7 @@ static void create_done(struct exofs_io_state *ios, void *p)
if (unlikely(ret)) {
EXOFS_ERR("object=0x%llx creation faild in pid=0x%llx",
_LLU(exofs_oi_objno(oi)), _LLU(sbi->s_pid));
_LLU(exofs_oi_objno(oi)), _LLU(sbi->layout.s_pid));
/*TODO: When FS is corrupted creation can fail, object already
* exist. Get rid of this asynchronous creation, if exist
* increment the obj counter and try the next object. Until we
......@@ -1104,7 +1104,7 @@ struct inode *exofs_new_inode(struct inode *dir, int mode)
mark_inode_dirty(inode);
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret)) {
EXOFS_ERR("exofs_new_inode: exofs_get_io_state failed\n");
return ERR_PTR(ret);
......@@ -1202,7 +1202,7 @@ static int exofs_update_inode(struct inode *inode, int do_sync)
} else
memcpy(fcb->i_data, oi->i_data, sizeof(fcb->i_data));
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret)) {
EXOFS_ERR("%s: exofs_get_io_state failed.\n", __func__);
goto free_args;
......@@ -1286,7 +1286,7 @@ void exofs_delete_inode(struct inode *inode)
clear_inode(inode);
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret)) {
EXOFS_ERR("%s: exofs_get_io_state failed\n", __func__);
return;
......
......@@ -67,23 +67,24 @@ int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj,
return ret;
}
int exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** pios)
int exofs_get_io_state(struct exofs_layout *layout,
struct exofs_io_state **pios)
{
struct exofs_io_state *ios;
/*TODO: Maybe use kmem_cach per sbi of size
* exofs_io_state_size(sbi->s_numdevs)
* exofs_io_state_size(layout->s_numdevs)
*/
ios = kzalloc(exofs_io_state_size(sbi->s_numdevs), GFP_KERNEL);
ios = kzalloc(exofs_io_state_size(layout->s_numdevs), GFP_KERNEL);
if (unlikely(!ios)) {
EXOFS_DBGMSG("Faild kzalloc bytes=%d\n",
exofs_io_state_size(sbi->s_numdevs));
exofs_io_state_size(layout->s_numdevs));
*pios = NULL;
return -ENOMEM;
}
ios->sbi = sbi;
ios->obj.partition = sbi->s_pid;
ios->layout = layout;
ios->obj.partition = layout->s_pid;
*pios = ios;
return 0;
}
......@@ -238,10 +239,10 @@ int exofs_sbi_create(struct exofs_io_state *ios)
{
int i, ret;
for (i = 0; i < ios->sbi->s_numdevs; i++) {
for (i = 0; i < ios->layout->s_numdevs; i++) {
struct osd_request *or;
or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
or = osd_start_request(ios->layout->s_ods[i], GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
......@@ -262,10 +263,10 @@ int exofs_sbi_remove(struct exofs_io_state *ios)
{
int i, ret;
for (i = 0; i < ios->sbi->s_numdevs; i++) {
for (i = 0; i < ios->layout->s_numdevs; i++) {
struct osd_request *or;
or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
or = osd_start_request(ios->layout->s_ods[i], GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
......@@ -286,10 +287,10 @@ int exofs_sbi_write(struct exofs_io_state *ios)
{
int i, ret;
for (i = 0; i < ios->sbi->s_numdevs; i++) {
for (i = 0; i < ios->layout->s_numdevs; i++) {
struct osd_request *or;
or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
or = osd_start_request(ios->layout->s_ods[i], GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
......@@ -361,8 +362,9 @@ int exofs_sbi_read(struct exofs_io_state *ios)
struct osd_request *or;
unsigned first_dev = (unsigned)ios->obj.id;
first_dev %= ios->sbi->s_numdevs;
or = osd_start_request(ios->sbi->s_ods[first_dev], GFP_KERNEL);
first_dev %= ios->layout->s_numdevs;
or = osd_start_request(ios->layout->s_ods[first_dev],
GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
......@@ -438,7 +440,7 @@ int exofs_oi_truncate(struct exofs_i_info *oi, u64 size)
__be64 newsize;
int i, ret;
if (exofs_get_io_state(sbi, &ios))
if (exofs_get_io_state(&sbi->layout, &ios))
return -ENOMEM;
ios->obj.id = exofs_oi_objno(oi);
......@@ -448,10 +450,10 @@ int exofs_oi_truncate(struct exofs_i_info *oi, u64 size)
attr = g_attr_logical_length;
attr.val_ptr = &newsize;
for (i = 0; i < sbi->s_numdevs; i++) {
for (i = 0; i < sbi->layout.s_numdevs; i++) {
struct osd_request *or;
or = osd_start_request(sbi->s_ods[i], GFP_KERNEL);
or = osd_start_request(sbi->layout.s_ods[i], GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
......
......@@ -210,7 +210,7 @@ int exofs_sync_fs(struct super_block *sb, int wait)
sbi = sb->s_fs_info;
fscb = &sbi->s_fscb;
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (ret)
goto out;
......@@ -264,12 +264,12 @@ static void _exofs_print_device(const char *msg, const char *dev_path,
void exofs_free_sbi(struct exofs_sb_info *sbi)
{
while (sbi->s_numdevs) {
int i = --sbi->s_numdevs;
struct osd_dev *od = sbi->s_ods[i];
while (sbi->layout.s_numdevs) {
int i = --sbi->layout.s_numdevs;
struct osd_dev *od = sbi->layout.s_ods[i];
if (od) {
sbi->s_ods[i] = NULL;
sbi->layout.s_ods[i] = NULL;
osduld_put_device(od);
}
}
......@@ -298,7 +298,8 @@ static void exofs_put_super(struct super_block *sb)
msecs_to_jiffies(100));
}
_exofs_print_device("Unmounting", NULL, sbi->s_ods[0], sbi->s_pid);
_exofs_print_device("Unmounting", NULL, sbi->layout.s_ods[0],
sbi->layout.s_pid);
exofs_free_sbi(sbi);
sb->s_fs_info = NULL;
......@@ -361,7 +362,7 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
{
struct exofs_sb_info *sbi = *psbi;
struct osd_dev *fscb_od;
struct osd_obj_id obj = {.partition = sbi->s_pid,
struct osd_obj_id obj = {.partition = sbi->layout.s_pid,
.id = EXOFS_DEVTABLE_ID};
struct exofs_device_table *dt;
unsigned table_bytes = table_count * sizeof(dt->dt_dev_table[0]) +
......@@ -376,9 +377,9 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
return -ENOMEM;
}
fscb_od = sbi->s_ods[0];
sbi->s_ods[0] = NULL;
sbi->s_numdevs = 0;
fscb_od = sbi->layout.s_ods[0];
sbi->layout.s_ods[0] = NULL;
sbi->layout.s_numdevs = 0;
ret = exofs_read_kern(fscb_od, sbi->s_cred, &obj, 0, dt, table_bytes);
if (unlikely(ret)) {
EXOFS_ERR("ERROR: reading device table\n");
......@@ -397,14 +398,15 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
goto out;
if (likely(numdevs > 1)) {
unsigned size = numdevs * sizeof(sbi->s_ods[0]);
unsigned size = numdevs * sizeof(sbi->layout.s_ods[0]);
sbi = krealloc(sbi, sizeof(*sbi) + size, GFP_KERNEL);
if (unlikely(!sbi)) {
ret = -ENOMEM;
goto out;
}
memset(&sbi->s_ods[1], 0, size - sizeof(sbi->s_ods[0]));
memset(&sbi->layout.s_ods[1], 0,
size - sizeof(sbi->layout.s_ods[0]));
*psbi = sbi;
}
......@@ -427,8 +429,8 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
* line. We always keep them in device-table order.
*/
if (fscb_od && osduld_device_same(fscb_od, &odi)) {
sbi->s_ods[i] = fscb_od;
++sbi->s_numdevs;
sbi->layout.s_ods[i] = fscb_od;
++sbi->layout.s_numdevs;
fscb_od = NULL;
continue;
}
......@@ -441,8 +443,8 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
goto out;
}
sbi->s_ods[i] = od;
++sbi->s_numdevs;
sbi->layout.s_ods[i] = od;
++sbi->layout.s_numdevs;
/* Read the fscb of the other devices to make sure the FS
* partition is there.
......@@ -499,9 +501,10 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent)
goto free_sbi;
}
sbi->s_ods[0] = od;
sbi->s_numdevs = 1;
sbi->s_pid = opts->pid;
/* Default layout in case we do not have a device-table */
sbi->layout.s_ods[0] = od;
sbi->layout.s_numdevs = 1;
sbi->layout.s_pid = opts->pid;
sbi->s_timeout = opts->timeout;
/* fill in some other data by hand */
......@@ -514,7 +517,7 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent)
sb->s_bdev = NULL;
sb->s_dev = 0;
obj.partition = sbi->s_pid;
obj.partition = sbi->layout.s_pid;
obj.id = EXOFS_SUPER_ID;
exofs_make_credential(sbi->s_cred, &obj);
......@@ -578,13 +581,13 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent)
goto free_sbi;
}
_exofs_print_device("Mounting", opts->dev_name, sbi->s_ods[0],
sbi->s_pid);
_exofs_print_device("Mounting", opts->dev_name, sbi->layout.s_ods[0],
sbi->layout.s_pid);
return 0;
free_sbi:
EXOFS_ERR("Unable to mount exofs on %s pid=0x%llx err=%d\n",
opts->dev_name, sbi->s_pid, ret);
opts->dev_name, sbi->layout.s_pid, ret);
exofs_free_sbi(sbi);
return ret;
}
......@@ -627,7 +630,7 @@ static int exofs_statfs(struct dentry *dentry, struct kstatfs *buf)
uint8_t cred_a[OSD_CAP_LEN];
int ret;
ret = exofs_get_io_state(sbi, &ios);
ret = exofs_get_io_state(&sbi->layout, &ios);
if (ret) {
EXOFS_DBGMSG("exofs_get_io_state failed.\n");
return ret;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册