Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 44defeb3 编写于 作者: J Jeff Kirsher 提交者： Jeff Garzik
浏览文件
操作

e1000e: convert ndev_ printks to something smaller 

The ndev_* printk's are too lenghty and we don't need to specify
the adapter/netdev struct at all, making this a lot more readable.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 77970ea5
隐藏空白更改
内联 并排
Showing with 112 addition and 144 deletion
drivers/net/e1000e/e1000.h
浏览文件 @ 44defeb3
...@@ -41,24 +41,25 @@ ...@@ -41,24 +41,25 @@
struct e1000_info; struct e1000_info;
#define ndev_printk(level, netdev, format, arg...) \ #define e_printk(level, adapter, format, arg...) \
printk(level "%s: " format, (netdev)->name, ## arg) printk(level "%s: %s: " format, pci_name(adapter->pdev), \
adapter->netdev->name, ## arg)
#ifdef DEBUG #ifdef DEBUG
#define ndev_dbg(netdev, format, arg...) \ #define e_dbg(format, arg...) \
ndev_printk(KERN_DEBUG , netdev, format, ## arg) e_printk(KERN_DEBUG , adapter, format, ## arg)
#else #else
#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0) #define e_dbg(format, arg...) do { (void)(adapter); } while (0)
#endif #endif
#define ndev_err(netdev, format, arg...) \ #define e_err(format, arg...) \
ndev_printk(KERN_ERR , netdev, format, ## arg) e_printk(KERN_ERR, adapter, format, ## arg)
#define ndev_info(netdev, format, arg...) \ #define e_info(format, arg...) \
ndev_printk(KERN_INFO , netdev, format, ## arg) e_printk(KERN_INFO, adapter, format, ## arg)
#define ndev_warn(netdev, format, arg...) \ #define e_warn(format, arg...) \
ndev_printk(KERN_WARNING , netdev, format, ## arg) e_printk(KERN_WARNING, adapter, format, ## arg)
#define ndev_notice(netdev, format, arg...) \ #define e_notice(format, arg...) \
ndev_printk(KERN_NOTICE , netdev, format, ## arg) e_printk(KERN_NOTICE, adapter, format, ## arg)
/* Tx/Rx descriptor defines */ /* Tx/Rx descriptor defines */
......
drivers/net/e1000e/ethtool.c
浏览文件 @ 44defeb3
...@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) ...@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */ /* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) { spddplx != (SPEED_1000 + DUPLEX_FULL)) {
ndev_err(adapter->netdev, "Unsupported Speed/Duplex " e_err("Unsupported Speed/Duplex configuration\n");
"configuration\n");
return -EINVAL; return -EINVAL;
} }
...@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) ...@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break; break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */ case SPEED_1000 + DUPLEX_HALF: /* not supported */
default: default:
ndev_err(adapter->netdev, "Unsupported Speed/Duplex " e_err("Unsupported Speed/Duplex configuration\n");
"configuration\n");
return -EINVAL; return -EINVAL;
} }
return 0; return 0;
...@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev, ...@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
* cannot be changed * cannot be changed
*/ */
if (e1000_check_reset_block(hw)) { if (e1000_check_reset_block(hw)) {
ndev_err(netdev, "Cannot change link " e_err("Cannot change link characteristics when SoL/IDER is "
"characteristics when SoL/IDER is active.\n"); "active.\n");
return -EINVAL; return -EINVAL;
} }
...@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) ...@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
netdev->features &= ~NETIF_F_TSO6; netdev->features &= ~NETIF_F_TSO6;
} }
ndev_info(netdev, "TSO is %s\n", e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
data ? "Enabled" : "Disabled");
adapter->flags |= FLAG_TSO_FORCE; adapter->flags |= FLAG_TSO_FORCE;
return 0; return 0;
} }
...@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, ...@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
(test[pat] & write)); (test[pat] & write));
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
if (val != (test[pat] & write & mask)) { if (val != (test[pat] & write & mask)) {
ndev_err(adapter->netdev, "pattern test reg %04X " e_err("pattern test reg %04X failed: got 0x%08X "
"failed: got 0x%08X expected 0x%08X\n", "expected 0x%08X\n", reg + offset, val,
reg + offset, (test[pat] & write & mask));
val, (test[pat] & write & mask));
*data = reg; *data = reg;
return 1; return 1;
} }
...@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, ...@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
__ew32(&adapter->hw, reg, write & mask); __ew32(&adapter->hw, reg, write & mask);
val = __er32(&adapter->hw, reg); val = __er32(&adapter->hw, reg);
if ((write & mask) != (val & mask)) { if ((write & mask) != (val & mask)) {
ndev_err(adapter->netdev, "set/check reg %04X test failed: " e_err("set/check reg %04X test failed: got 0x%08X "
"got 0x%08X expected 0x%08X\n", reg, (val & mask), "expected 0x%08X\n", reg, (val & mask), (write & mask));
(write & mask));
*data = reg; *data = reg;
return 1; return 1;
} }
...@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) ...@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
{ {
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_mac_info *mac = &adapter->hw.mac;
struct net_device *netdev = adapter->netdev;
u32 value; u32 value;
u32 before; u32 before;
u32 after; u32 after;
...@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) ...@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle); ew32(STATUS, toggle);
after = er32(STATUS) & toggle; after = er32(STATUS) & toggle;
if (value != after) { if (value != after) {
ndev_err(netdev, "failed STATUS register test got: " e_err("failed STATUS register test got: 0x%08X expected: "
"0x%08X expected: 0x%08X\n", after, value); "0x%08X\n", after, value);
*data = 1; *data = 1;
return 1; return 1;
} }
...@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) ...@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1; *data = 1;
return -1; return -1;
} }
ndev_info(netdev, "testing %s interrupt\n", e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
(shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */ /* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF); ew32(IMC, 0xFFFFFFFF);
...@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) ...@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
* sessions are active * sessions are active
*/ */
if (e1000_check_reset_block(&adapter->hw)) { if (e1000_check_reset_block(&adapter->hw)) {
ndev_err(adapter->netdev, "Cannot do PHY loopback test " e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
"when SoL/IDER is active.\n");
*data = 0; *data = 0;
goto out; goto out;
} }
...@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev, ...@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
autoneg = adapter->hw.mac.autoneg; autoneg = adapter->hw.mac.autoneg;
ndev_info(netdev, "offline testing starting\n"); e_info("offline testing starting\n");
/* /*
* Link test performed before hardware reset so autoneg doesn't * Link test performed before hardware reset so autoneg doesn't
...@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev, ...@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running) if (if_running)
dev_open(netdev); dev_open(netdev);
} else { } else {
ndev_info(netdev, "online testing starting\n"); e_info("online testing starting\n");
/* Online tests */ /* Online tests */
if (e1000_link_test(adapter, &data[4])) if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED; eth_test->flags |= ETH_TEST_FL_FAILED;
...@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev, ...@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST; wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX) if (adapter->wol & E1000_WUFC_EX)
ndev_err(netdev, "Interface does not support " e_err("Interface does not support directed (unicast) "
"directed (unicast) frame wake-up packets\n"); "frame wake-up packets\n");
} }
if (adapter->wol & E1000_WUFC_EX) if (adapter->wol & E1000_WUFC_EX)
......
drivers/net/e1000e/netdev.c
浏览文件 @ 44defeb3
...@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, ...@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
* packet, also make sure the frame isn't just CRC only */ * packet, also make sure the frame isn't just CRC only */
if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
/* All receives must fit into a single buffer */ /* All receives must fit into a single buffer */
ndev_dbg(netdev, "%s: Receive packet consumed " e_dbg("%s: Receive packet consumed multiple buffers\n",
"multiple buffers\n", netdev->name); netdev->name);
/* recycle */ /* recycle */
buffer_info->skb = skb; buffer_info->skb = skb;
goto next_desc; goto next_desc;
...@@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) ...@@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
unsigned int i = tx_ring->next_to_clean; unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch; unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
struct net_device *netdev = adapter->netdev;
/* detected Tx unit hang */ /* detected Tx unit hang */
ndev_err(netdev, e_err("Detected Tx Unit Hang:\n"
"Detected Tx Unit Hang:\n" " TDH <%x>\n"
" TDH <%x>\n" " TDT <%x>\n"
" TDT <%x>\n" " next_to_use <%x>\n"
" next_to_use <%x>\n" " next_to_clean <%x>\n"
" next_to_clean <%x>\n" "buffer_info[next_to_clean]:\n"
"buffer_info[next_to_clean]:\n" " time_stamp <%lx>\n"
" time_stamp <%lx>\n" " next_to_watch <%x>\n"
" next_to_watch <%x>\n" " jiffies <%lx>\n"
" jiffies <%lx>\n" " next_to_watch.status <%x>\n",
" next_to_watch.status <%x>\n", readl(adapter->hw.hw_addr + tx_ring->head),
readl(adapter->hw.hw_addr + tx_ring->head), readl(adapter->hw.hw_addr + tx_ring->tail),
readl(adapter->hw.hw_addr + tx_ring->tail), tx_ring->next_to_use,
tx_ring->next_to_use, tx_ring->next_to_clean,
tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp,
tx_ring->buffer_info[eop].time_stamp, eop,
eop, jiffies,
jiffies, eop_desc->upper.fields.status);
eop_desc->upper.fields.status);
} }
/** /**
...@@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, ...@@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
buffer_info->dma = 0; buffer_info->dma = 0;
if (!(staterr & E1000_RXD_STAT_EOP)) { if (!(staterr & E1000_RXD_STAT_EOP)) {
ndev_dbg(netdev, "%s: Packet Split buffers didn't pick " e_dbg("%s: Packet Split buffers didn't pick up the "
"up the full packet\n", netdev->name); "full packet\n", netdev->name);
dev_kfree_skb_irq(skb); dev_kfree_skb_irq(skb);
goto next_desc; goto next_desc;
} }
...@@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, ...@@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0); length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) { if (!length) {
ndev_dbg(netdev, "%s: Last part of the packet spanning" e_dbg("%s: Last part of the packet spanning multiple "
" multiple descriptors\n", netdev->name); "descriptors\n", netdev->name);
dev_kfree_skb_irq(skb); dev_kfree_skb_irq(skb);
goto next_desc; goto next_desc;
} }
...@@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, ...@@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* eth type trans needs skb->data to point to something */ /* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) { if (!pskb_may_pull(skb, ETH_HLEN)) {
ndev_err(netdev, "pskb_may_pull failed.\n"); e_err("pskb_may_pull failed.\n");
dev_kfree_skb(skb); dev_kfree_skb(skb);
goto next_desc; goto next_desc;
} }
...@@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter) ...@@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev); netdev);
if (err) { if (err) {
ndev_err(netdev, e_err("Unable to allocate %s interrupt (return: %d)\n",
"Unable to allocate %s interrupt (return: %d)\n", adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err);
adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
err);
if (adapter->flags & FLAG_MSI_ENABLED) if (adapter->flags & FLAG_MSI_ENABLED)
pci_disable_msi(adapter->pdev); pci_disable_msi(adapter->pdev);
} }
...@@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter) ...@@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
return 0; return 0;
err: err:
vfree(tx_ring->buffer_info); vfree(tx_ring->buffer_info);
ndev_err(adapter->netdev, e_err("Unable to allocate memory for the transmit descriptor ring\n");
"Unable to allocate memory for the transmit descriptor ring\n");
return err; return err;
} }
...@@ -1450,8 +1445,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter) ...@@ -1450,8 +1445,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
} }
err: err:
vfree(rx_ring->buffer_info); vfree(rx_ring->buffer_info);
ndev_err(adapter->netdev, e_err("Unable to allocate memory for the transmit descriptor ring\n");
"Unable to allocate memory for the transmit descriptor ring\n");
return err; return err;
} }
...@@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ...@@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(WUC, 0); ew32(WUC, 0);
if (mac->ops.init_hw(hw)) if (mac->ops.init_hw(hw))
ndev_err(adapter->netdev, "Hardware Error\n"); e_err("Hardware Error\n");
e1000_update_mng_vlan(adapter); e1000_update_mng_vlan(adapter);
...@@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) ...@@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
return 0; return 0;
err: err:
ndev_err(netdev, "Unable to allocate memory for queues\n"); e_err("Unable to allocate memory for queues\n");
kfree(adapter->rx_ring); kfree(adapter->rx_ring);
kfree(adapter->tx_ring); kfree(adapter->tx_ring);
return -ENOMEM; return -ENOMEM;
...@@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ...@@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val) if (ret_val)
ndev_warn(adapter->netdev, e_warn("Error reading PHY register\n");
"Error reading PHY register\n");
} else { } else {
/* /*
* Do not read PHY registers if link is not up * Do not read PHY registers if link is not up
...@@ -2943,18 +2936,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ...@@ -2943,18 +2936,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter) static void e1000_print_link_info(struct e1000_adapter *adapter)
{ {
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL); u32 ctrl = er32(CTRL);
ndev_info(netdev, e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
"Link is Up %d Mbps %s, Flow Control: %s\n", adapter->link_speed,
adapter->link_speed, (adapter->link_duplex == FULL_DUPLEX) ?
(adapter->link_duplex == FULL_DUPLEX) ? "Full Duplex" : "Half Duplex",
"Full Duplex" : "Half Duplex", ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
"RX/TX" : ((ctrl & E1000_CTRL_RFCE) ? "RX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" : ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
} }
static bool e1000_has_link(struct e1000_adapter *adapter) static bool e1000_has_link(struct e1000_adapter *adapter)
...@@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter) ...@@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
(er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
/* See e1000_kmrn_lock_loss_workaround_ich8lan() */ /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
ndev_info(adapter->netdev, e_info("Gigabit has been disabled, downgrading speed\n");
"Gigabit has been disabled, downgrading speed\n");
} }
return link_active; return link_active;
...@@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work) ...@@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work)
switch (adapter->link_speed) { switch (adapter->link_speed) {
case SPEED_10: case SPEED_10:
case SPEED_100: case SPEED_100:
ndev_info(netdev, e_info("10/100 speed: disabling TSO\n");
"10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6; netdev->features &= ~NETIF_F_TSO6;
break; break;
...@@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work) ...@@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (netif_carrier_ok(netdev)) { if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0; adapter->link_speed = 0;
adapter->link_duplex = 0; adapter->link_duplex = 0;
ndev_info(netdev, "Link is Down\n"); e_info("Link is Down\n");
netif_carrier_off(netdev); netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev); netif_tx_stop_all_queues(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state)) if (!test_bit(__E1000_DOWN, &adapter->state))
...@@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ...@@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
pull_size = min((unsigned int)4, skb->data_len); pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) { if (!__pskb_pull_tail(skb, pull_size)) {
ndev_err(netdev, e_err("__pskb_pull_tail failed.\n");
"__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb); dev_kfree_skb_any(skb);
return NETDEV_TX_OK; return NETDEV_TX_OK;
} }
...@@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) { (max_frame > MAX_JUMBO_FRAME_SIZE)) {
ndev_err(netdev, "Invalid MTU setting\n"); e_err("Invalid MTU setting\n");
return -EINVAL; return -EINVAL;
} }
/* Jumbo frame size limits */ /* Jumbo frame size limits */
if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
ndev_err(netdev, "Jumbo Frames not supported.\n"); e_err("Jumbo Frames not supported.\n");
return -EINVAL; return -EINVAL;
} }
if (adapter->hw.phy.type == e1000_phy_ife) { if (adapter->hw.phy.type == e1000_phy_ife) {
ndev_err(netdev, "Jumbo Frames not supported.\n"); e_err("Jumbo Frames not supported.\n");
return -EINVAL; return -EINVAL;
} }
} }
#define MAX_STD_JUMBO_FRAME_SIZE 9234 #define MAX_STD_JUMBO_FRAME_SIZE 9234
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
ndev_err(netdev, "MTU > 9216 not supported.\n"); e_err("MTU > 9216 not supported.\n");
return -EINVAL; return -EINVAL;
} }
...@@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ ETH_FCS_LEN; + ETH_FCS_LEN;
ndev_info(netdev, "changing MTU from %d to %d\n", e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
netdev->mtu, new_mtu);
netdev->mtu = new_mtu; netdev->mtu = new_mtu;
if (netif_running(netdev)) if (netif_running(netdev))
...@@ -4175,22 +4162,19 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) ...@@ -4175,22 +4162,19 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
u32 pba_num; u32 pba_num;
/* print bus type/speed/width info */ /* print bus type/speed/width info */
ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
"%02x:%02x:%02x:%02x:%02x:%02x\n", /* bus width */
/* bus width */ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : "Width x1"),
"Width x1"), /* MAC address */
/* MAC address */ netdev->dev_addr[0], netdev->dev_addr[1],
netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3],
netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
netdev->dev_addr[4], netdev->dev_addr[5]); e_info("Intel(R) PRO/%s Network Connection\n",
ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
(hw->phy.type == e1000_phy_ife)
? "10/100" : "1000");
e1000e_read_pba_num(hw, &pba_num); e1000e_read_pba_num(hw, &pba_num);
ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type, hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
(pba_num >> 8), (pba_num & 0xff));
} }
/** /**
...@@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, ...@@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
} }
if (e1000_check_reset_block(&adapter->hw)) if (e1000_check_reset_block(&adapter->hw))
ndev_info(netdev, e_info("PHY reset is blocked due to SOL/IDER session.\n");
"PHY reset is blocked due to SOL/IDER session.\n");
netdev->features = NETIF_F_SG | netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM | NETIF_F_HW_CSUM |
...@@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, ...@@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break; break;
if (i == 2) { if (i == 2) {
ndev_err(netdev, "The NVM Checksum Is Not Valid\n"); e_err("The NVM Checksum Is Not Valid\n");
err = -EIO; err = -EIO;
goto err_eeprom; goto err_eeprom;
} }
...@@ -4419,17 +4402,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, ...@@ -4419,17 +4402,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* copy the MAC address out of the NVM */ /* copy the MAC address out of the NVM */
if (e1000e_read_mac_addr(&adapter->hw)) if (e1000e_read_mac_addr(&adapter->hw))
ndev_err(netdev, "NVM Read Error while reading MAC address\n"); e_err("NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) { if (!is_valid_ether_addr(netdev->perm_addr)) {
ndev_err(netdev, "Invalid MAC Address: " e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
"%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->perm_addr[0], netdev->perm_addr[1],
netdev->perm_addr[0], netdev->perm_addr[1], netdev->perm_addr[2], netdev->perm_addr[3],
netdev->perm_addr[2], netdev->perm_addr[3], netdev->perm_addr[4], netdev->perm_addr[5]);
netdev->perm_addr[4], netdev->perm_addr[5]);
err = -EIO; err = -EIO;
goto err_eeprom; goto err_eeprom;
} }
......
drivers/net/e1000e/param.c
浏览文件 @ 44defeb3
...@@ -27,6 +27,7 @@ ...@@ -27,6 +27,7 @@
*******************************************************************************/ *******************************************************************************/
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/pci.h>
#include "e1000.h" #include "e1000.h"
...@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value, ...@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option: case enable_option:
switch (*value) { switch (*value) {
case OPTION_ENABLED: case OPTION_ENABLED:
ndev_info(adapter->netdev, "%s Enabled\n", opt->name); e_info("%s Enabled\n", opt->name);
return 0; return 0;
case OPTION_DISABLED: case OPTION_DISABLED:
ndev_info(adapter->netdev, "%s Disabled\n", opt->name); e_info("%s Disabled\n", opt->name);
return 0; return 0;
} }
break; break;
case range_option: case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
ndev_info(adapter->netdev, e_info("%s set to %i\n", opt->name, *value);
"%s set to %i\n", opt->name, *value);
return 0; return 0;
} }
break; break;
...@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value, ...@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i]; ent = &opt->arg.l.p[i];
if (*value == ent->i) { if (*value == ent->i) {
if (ent->str[0] != '\0') if (ent->str[0] != '\0')
ndev_info(adapter->netdev, "%s\n", e_info("%s\n", ent->str);
ent->str);
return 0; return 0;
} }
} }
...@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value, ...@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG(); BUG();
} }
ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n", e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
opt->name, *value, opt->err); opt->err);
*value = opt->def; *value = opt->def;
return -1; return -1;
} }
...@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value, ...@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value,
void __devinit e1000e_check_options(struct e1000_adapter *adapter) void __devinit e1000e_check_options(struct e1000_adapter *adapter)
{ {
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
int bd = adapter->bd_number; int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) { if (bd >= E1000_MAX_NIC) {
ndev_notice(netdev, e_notice("Warning: no configuration for board #%i\n", bd);
"Warning: no configuration for board #%i\n", bd); e_notice("Using defaults for all values\n");
ndev_notice(netdev, "Using defaults for all values\n");
} }
{ /* Transmit Interrupt Delay */ { /* Transmit Interrupt Delay */
...@@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) ...@@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
adapter->itr = InterruptThrottleRate[bd]; adapter->itr = InterruptThrottleRate[bd];
switch (adapter->itr) { switch (adapter->itr) {
case 0: case 0:
ndev_info(netdev, "%s turned off\n", e_info("%s turned off\n", opt.name);
opt.name);
break; break;
case 1: case 1:
ndev_info(netdev, e_info("%s set to dynamic mode\n", opt.name);
"%s set to dynamic mode\n",
opt.name);
adapter->itr_setting = adapter->itr; adapter->itr_setting = adapter->itr;
adapter->itr = 20000; adapter->itr = 20000;
break; break;
case 3: case 3:
ndev_info(netdev, e_info("%s set to dynamic conservative mode\n",
"%s set to dynamic conservative mode\n",
opt.name); opt.name);
adapter->itr_setting = adapter->itr; adapter->itr_setting = adapter->itr;
adapter->itr = 20000; adapter->itr = 20000;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或