提交 44cae9b2 编写于 作者: L Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.15.

   - Maciej Rozycki found another series of FP issues which requires a
     seven part series to restructure and fix.

   - James fixes a warning about .set mt which gas doesn't like when
     building for R1 processors"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
  MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
  MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
  MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
  MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
  MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
  MIPS: Factor out NT_PRFPREG regset access helpers
  MIPS: CPS: Fix r1 .set mt assembler warning
......@@ -235,6 +235,7 @@ LEAF(mips_cps_core_init)
has_mt t0, 3f
.set push
.set MIPS_ISA_LEVEL_RAW
.set mt
/* Only allow 1 TC per VPE to execute... */
......@@ -388,6 +389,7 @@ LEAF(mips_cps_boot_vpes)
#elif defined(CONFIG_MIPS_MT)
.set push
.set MIPS_ISA_LEVEL_RAW
.set mt
/* If the core doesn't support MT then return */
......
......@@ -705,6 +705,18 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
struct task_struct *t;
int max_users;
/* If nothing to change, return right away, successfully. */
if (value == mips_get_process_fp_mode(task))
return 0;
/* Only accept a mode change if 64-bit FP enabled for o32. */
if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT))
return -EOPNOTSUPP;
/* And only for o32 tasks. */
if (IS_ENABLED(CONFIG_64BIT) && !test_thread_flag(TIF_32BIT_REGS))
return -EOPNOTSUPP;
/* Check the value is valid */
if (value & ~known_bits)
return -EOPNOTSUPP;
......
......@@ -419,63 +419,160 @@ static int gpr64_set(struct task_struct *target,
#endif /* CONFIG_64BIT */
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* !CONFIG_CPU_HAS_MSA variant. FP context's general register slots
* correspond 1:1 to buffer slots. Only general registers are copied.
*/
static int fpr_get_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
void **kbuf, void __user **ubuf)
{
return user_regset_copyout(pos, count, kbuf, ubuf,
&target->thread.fpu,
0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* CONFIG_CPU_HAS_MSA variant. Only lower 64 bits of FP context's
* general register slots are copied to buffer slots. Only general
* registers are copied.
*/
static int fpr_get_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
void **kbuf, void __user **ubuf)
{
unsigned int i;
u64 fpr_val;
int err;
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS; i++) {
fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
err = user_regset_copyout(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
return err;
}
return 0;
}
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
*/
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
unsigned i;
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
int err;
u64 fpr_val;
/* XXX fcr31 */
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_get_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_get_msa(target, &pos, &count, &kbuf, &ubuf);
if (err)
return err;
if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu,
0, sizeof(elf_fpregset_t));
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
for (i = 0; i < NUM_FPU_REGS; i++) {
fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
return err;
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* !CONFIG_CPU_HAS_MSA variant. Buffer slots correspond 1:1 to FP
* context's general register slots. Only general registers are copied.
*/
static int fpr_set_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
const void **kbuf, const void __user **ubuf)
{
return user_regset_copyin(pos, count, kbuf, ubuf,
&target->thread.fpu,
0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* CONFIG_CPU_HAS_MSA variant. Buffer slots are copied to lower 64
* bits only of FP context's general register slots. Only general
* registers are copied.
*/
static int fpr_set_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
const void **kbuf, const void __user **ubuf)
{
unsigned int i;
u64 fpr_val;
int err;
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS && *count > 0; i++) {
err = user_regset_copyin(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
return err;
set_fpr64(&target->thread.fpu.fpr[i], 0, fpr_val);
}
return 0;
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
*
* We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
* which is supposed to have been guaranteed by the kernel before
* calling us, e.g. in `ptrace_regset'. We enforce that requirement,
* so that we can safely avoid preinitializing temporaries for
* partial register writes.
*/
static int fpr_set(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
unsigned i;
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
u32 fcr31;
int err;
u64 fpr_val;
/* XXX fcr31 */
BUG_ON(count % sizeof(elf_fpreg_t));
if (pos + count > sizeof(elf_fpregset_t))
return -EIO;
init_fp_ctx(target);
if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu,
0, sizeof(elf_fpregset_t));
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_set_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_set_msa(target, &pos, &count, &kbuf, &ubuf);
if (err)
return err;
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
if (count > 0) {
err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
&fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
if (err)
return err;
set_fpr64(&target->thread.fpu.fpr[i], 0, fpr_val);
ptrace_setfcr31(target, fcr31);
}
return 0;
return err;
}
enum mips_regset {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册