bnx2x: 1G LED does not turn off

1G LED does not turn off
The 1G LED was not switched to off when the link was lost
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bnx2x.h

@@ -120,6 +120,7 @@
 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
 #define SHMEM_WR(bp, field, val)	REG_WR(bp, SHMEM_ADDR(bp, field), val)
 
+#define EMAC_RD(bp, reg)		REG_RD(bp, emac_base + reg)
 #define NIG_WR(reg, val)	REG_WR(bp, reg, val)
 #define EMAC_WR(reg, val)	REG_WR(bp, emac_base + reg, val)
 #define BMAC_WR(reg, val)	REG_WR(bp, GRCBASE_NIG + bmac_addr + reg, val)

drivers/net/bnx2x_link.c

@@ -3769,6 +3769,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id)
 {
 	u8 rc = 0;
+	u32 tmp;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -3777,6 +3779,9 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 		REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
 		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
 			   SHARED_HW_CFG_LED_MAC1);
+
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
 		break;
 
 	case LED_MODE_OPER:
@@ -3788,6 +3793,10 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 			   LED_BLINK_RATE_VAL);
 		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
 			   port*4, 1);
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(EMAC_REG_EMAC_LED,
+			    (tmp & (~EMAC_LED_OVERRIDE)));
+
 		if (!CHIP_IS_E1H(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||