siimage: PIO mode setup fixes (take 2)

* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets
  PIO mode on the device.

* Add missing ide_get_best_pio_mode() call to sil_tuneproc() so
  "pio" == 255 (autotune) is handled correctly (previously PIO0 was used)
  and "pio" values > 4 && < 255 are filtered to PIO4 (instead of PIO0).

* Add code limiting maximum PIO mode according to the pair device capabilities
  to sil_tuneproc().

* Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and
  sil_tuneproc().  This fixes PIO fallback in siimage_config_drive_for_dma() to
  use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio()
  used wrong arguments for ide_get_best_pio_mode() and as a results always
  tried to set PIO4).

* Remove no longer needed siimage_taskfile_timing()
  and config_siimage_chipset_for_pio().

* Enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
  from siimage_speedproc()

* Bump driver version.

v2:
* Fix issues noticed by Sergei:
  - correct pair device check
  - trim only taskfile PIO to the slowest of the master/slave
  - enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
    from siimage_speedproc()
  - add TODO item for IORDY bugs
  - minor cleanups
Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 485efc6c
/*
* linux/drivers/ide/pci/siimage.c Version 1.12 Mar 10 2007
* linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
......@@ -31,6 +32,10 @@
* unplugging/replugging the virtual CD interface when the DRAC is reset.
* This often causes drivers/ide/siimage to panic but is ok with the rather
* smarter code in libata.
*
* TODO:
* - IORDY fixes
* - VDMA support
*/
#include <linux/types.h>
......@@ -160,82 +165,45 @@ static u8 sil_udma_filter(ide_drive_t *drive)
}
/**
* siimage_taskfile_timing - turn timing data to a mode
* @hwif: interface to query
*
* Read the timing data for the interface and return the
* mode that is being used.
*/
static byte siimage_taskfile_timing (ide_hwif_t *hwif)
{
u16 timing = 0x328a;
unsigned long addr = siimage_selreg(hwif, 2);
if (hwif->mmio)
timing = hwif->INW(addr);
else
pci_read_config_word(hwif->pci_dev, addr, &timing);
switch (timing) {
case 0x10c1: return 4;
case 0x10c3: return 3;
case 0x1104:
case 0x1281: return 2;
case 0x2283: return 1;
case 0x328a:
default: return 0;
}
}
/**
* simmage_tuneproc - tune a drive
* sil_tune_pio - tune a drive
* @drive: drive to tune
* @mode_wanted: the target operating mode
* @pio: the desired PIO mode
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
static void sil_tune_pio(ide_drive_t *drive, u8 pio)
{
const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
ide_hwif_t *hwif = HWIF(drive);
ide_drive_t *pair = &hwif->drives[drive->dn ^ 1];
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
/* cheat for now and use the docs */
switch (mode_wanted) {
case 4:
speedp = 0x10c1;
speedt = 0x10c1;
break;
case 3:
speedp = 0x10c3;
speedt = 0x10c3;
break;
case 2:
speedp = 0x1104;
speedt = 0x1281;
break;
case 1:
speedp = 0x2283;
speedt = 0x2283;
break;
case 0:
default:
speedp = 0x328a;
speedt = 0x328a;
break;
u8 tf_pio = pio;
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair->present) {
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
if (pair_pio < tf_pio)
tf_pio = pair_pio;
}
/* cheat for now and use the docs */
speedp = data_speed[pio];
speedt = tf_speed[tf_pio];
if (hwif->mmio) {
hwif->OUTW(speedp, addr);
hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
if(mode_wanted == 3 || mode_wanted == 4)
if (pio > 2)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
......@@ -245,42 +213,17 @@ static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if(mode_wanted == 3 || mode_wanted == 4)
if (pio > 2)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
}
}
/**
* config_siimage_chipset_for_pio - set drive timings
* @drive: drive to tune
* @speed we want
*
* Compute the best pio mode we can for a given device. Also honour
* the timings for the driver when dealing with mixed devices. Some
* of this is ugly but its all wrapped up here
*
* The SI680 can also do VDMA - we need to start using that
*
* FIXME: we use the BIOS channel timings to avoid driving the task
* files too fast at the disk. We need to compute the master/slave
* drive PIO mode properly so that we can up the speed on a hotplug
* system.
*/
static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed)
static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
u8 channel_timings = siimage_taskfile_timing(HWIF(drive));
u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
/* WARNING PIO timing mess is going to happen b/w devices, argh */
if ((channel_timings != set_pio) && (set_pio > channel_timings))
set_pio = channel_timings;
siimage_tuneproc(drive, set_pio);
speed = XFER_PIO_0 + set_pio;
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
......@@ -335,7 +278,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
siimage_tuneproc(drive, (speed - XFER_PIO_0));
sil_tune_pio(drive, speed - XFER_PIO_0);
mode |= ((unit) ? 0x10 : 0x01);
break;
case XFER_MW_DMA_2:
......@@ -343,7 +286,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
case XFER_MW_DMA_0:
multi = dma[speed - XFER_MW_DMA_0];
mode |= ((unit) ? 0x20 : 0x02);
config_siimage_chipset_for_pio(drive, 0);
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
......@@ -356,7 +298,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
config_siimage_chipset_for_pio(drive, 0);
break;
default:
return 1;
......@@ -390,7 +331,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
config_siimage_chipset_for_pio(drive, 1);
sil_tuneproc(drive, 255);
return -1;
}
......@@ -961,7 +902,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
hwif->tuneproc = &siimage_tuneproc;
hwif->tuneproc = &sil_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
......@@ -976,11 +917,11 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
first = 0;
}
}
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
if (hwif->dma_base == 0)
return;
}
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册