ARM: ux500: Convert to the common mmc DT bindings for highspeed mode

The mmci host driver supports the common mmc DT parser, which enables
us to use the use common names instead.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/ste-ccu9540.dts

@@ -38,8 +38,8 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
 			cd-gpios  = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 
 			status = "okay";

arch/arm/boot/dts/ste-href.dtsi

@@ -116,8 +116,8 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			st,sig-dir-dat0;
 			st,sig-dir-dat2;
 			st,sig-dir-cmd;
@@ -148,7 +148,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi2_default_mode>;
 			pinctrl-1 = <&sdi2_sleep_mode>;
@@ -161,7 +161,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;

arch/arm/boot/dts/ste-snowball.dts

@@ -156,7 +156,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -195,7 +195,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;