Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio_net: Sync header with qemu
  virtio-pci: correctly unregister root device on error
  virtio_blk: ioctl return value fix
  virtio_blk: don't bounce highmem requests
  lguest: restrict CPUID to avoid perf counter wrmsr
  lguest: remove unnecessary forward struct declaration
  lguest: fix journey

arch/x86/include/asm/lguest_hcall.h

@@ -30,7 +30,7 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030 But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *

arch/x86/lguest/boot.c

@@ -379,6 +379,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
 	native_cpuid(ax, bx, cx, dx);
 	switch (function) {
+	case 0: /* ID and highest CPUID.  Futureproof a little by sticking to
+		 * older ones. */
+		if (*ax > 5)
+			*ax = 5;
+		break;
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
@@ -1079,7 +1084,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029 Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
  * have to override to avoid privileged instructions. */
 __init void lguest_init(void)

drivers/block/virtio_blk.c

@@ -213,7 +213,7 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 	 * Only allow the generic SCSI ioctls if the host can support it.
 	 */
 	if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
-		return -ENOIOCTLCMD;
+		return -ENOTTY;
 
 	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 }
@@ -360,6 +360,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
 	blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
 
+	/* No need to bounce any requests */
+	blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+
 	/* No real sector limit. */
 	blk_queue_max_sectors(vblk->disk->queue, -1U);
 

drivers/lguest/lg.h

@@ -38,8 +38,6 @@ struct lguest_pages
 #define CHANGED_GDT_TLS		4 /* Actually a subset of CHANGED_GDT */
 #define CHANGED_ALL	        3
 
-struct lguest;
-
 struct lg_cpu {
 	unsigned int id;
 	struct lguest *lg;

drivers/virtio/virtio_pci.c

@@ -669,7 +669,7 @@ static int __init virtio_pci_init(void)
 
 	err = pci_register_driver(&virtio_pci_driver);
 	if (err)
-		device_unregister(virtio_pci_root);
+		root_device_unregister(virtio_pci_root);
 
 	return err;
 }

include/linux/lguest.h

@@ -11,7 +11,7 @@
 #define LG_CLOCK_MIN_DELTA	100UL
 #define LG_CLOCK_MAX_DELTA	ULONG_MAX
 
-/*G:032 The second method of communicating with the Host is to via "struct
+/*G:031 The second method of communicating with the Host is to via "struct
  * lguest_data".  Once the Guest's initialization hypercall tells the Host where
  * this is, the Guest and Host both publish information in it. :*/
 struct lguest_data

include/linux/virtio_net.h

@@ -27,6 +27,7 @@
 #define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
 #define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
 #define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
 
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 
@@ -81,14 +82,19 @@ typedef __u8 virtio_net_ctrl_ack;
 #define VIRTIO_NET_ERR    1
 
 /*
- * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
  */
 #define VIRTIO_NET_CTRL_RX    0
  #define VIRTIO_NET_CTRL_RX_PROMISC      0
  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI       2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI      3
+ #define VIRTIO_NET_CTRL_RX_NOUNI        4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST      5
 
 /*
  * Control the MAC filter table.