提交 2ef1e9ef 编写于 作者: D David S. Miller

Merge branch 'cxgb4'

Anish Bhatt says:

====================
ipv6 and related cleanup for cxgb4/cxgb4i

This patch set removes some duplicated/extraneous code from cxgb4i, guards
cxgb4 against compilation failure based on ipv6 tristate, make ipv6 related
code no longer be enabled by default irrespective of ipv6 tristate and fixes
a refcnt issue.
-Anish

v2 : Provide more detailed commit messages, make subject more concise as
recommended by Dave Miller.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -68,7 +68,7 @@ config CHELSIO_T3
config CHELSIO_T4
tristate "Chelsio Communications T4/T5 Ethernet support"
depends on PCI
depends on PCI && (IPV6 || IPV6=n)
select FW_LOADER
select MDIO
---help---
......
......@@ -4369,6 +4369,7 @@ EXPORT_SYMBOL(cxgb4_unregister_uld);
* success (true) if it belongs otherwise failure (false).
* Called with rcu_read_lock() held.
*/
#if IS_ENABLED(CONFIG_IPV6)
static bool cxgb4_netdev(const struct net_device *netdev)
{
struct adapter *adap;
......@@ -4490,6 +4491,13 @@ static int update_root_dev_clip(struct net_device *dev)
return ret;
/* Parse all bond and vlan devices layered on top of the physical dev */
root_dev = netdev_master_upper_dev_get_rcu(dev);
if (root_dev) {
ret = update_dev_clip(root_dev, dev);
if (ret)
return ret;
}
for (i = 0; i < VLAN_N_VID; i++) {
root_dev = __vlan_find_dev_deep_rcu(dev, htons(ETH_P_8021Q), i);
if (!root_dev)
......@@ -4522,6 +4530,7 @@ static void update_clip(const struct adapter *adap)
}
rcu_read_unlock();
}
#endif /* IS_ENABLED(CONFIG_IPV6) */
/**
* cxgb_up - enable the adapter
......@@ -4568,7 +4577,9 @@ static int cxgb_up(struct adapter *adap)
t4_intr_enable(adap);
adap->flags |= FULL_INIT_DONE;
notify_ulds(adap, CXGB4_STATE_UP);
#if IS_ENABLED(CONFIG_IPV6)
update_clip(adap);
#endif
out:
return err;
irq_err:
......@@ -6862,14 +6873,18 @@ static int __init cxgb4_init_module(void)
if (ret < 0)
debugfs_remove(cxgb4_debugfs_root);
#if IS_ENABLED(CONFIG_IPV6)
register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
#endif
return ret;
}
static void __exit cxgb4_cleanup_module(void)
{
#if IS_ENABLED(CONFIG_IPV6)
unregister_inet6addr_notifier(&cxgb4_inet6addr_notifier);
#endif
pci_unregister_driver(&cxgb4_driver);
debugfs_remove(cxgb4_debugfs_root); /* NULL ok */
}
......
......@@ -259,6 +259,7 @@ static void send_act_open_req(struct cxgbi_sock *csk, struct sk_buff *skb,
cxgb4_l2t_send(csk->cdev->ports[csk->port_id], skb, csk->l2t);
}
#if IS_ENABLED(CONFIG_IPV6)
static void send_act_open_req6(struct cxgbi_sock *csk, struct sk_buff *skb,
struct l2t_entry *e)
{
......@@ -344,6 +345,7 @@ static void send_act_open_req6(struct cxgbi_sock *csk, struct sk_buff *skb,
cxgb4_l2t_send(csk->cdev->ports[csk->port_id], skb, csk->l2t);
}
#endif
static void send_close_req(struct cxgbi_sock *csk)
{
......@@ -781,9 +783,11 @@ static void csk_act_open_retry_timer(unsigned long data)
if (csk->csk_family == AF_INET) {
send_act_open_func = send_act_open_req;
skb = alloc_wr(size, 0, GFP_ATOMIC);
#if IS_ENABLED(CONFIG_IPV6)
} else {
send_act_open_func = send_act_open_req6;
skb = alloc_wr(size6, 0, GFP_ATOMIC);
#endif
}
if (!skb)
......@@ -1313,11 +1317,6 @@ static int init_act_open(struct cxgbi_sock *csk)
cxgbi_sock_set_flag(csk, CTPF_HAS_ATID);
cxgbi_sock_get(csk);
n = dst_neigh_lookup(csk->dst, &csk->daddr.sin_addr.s_addr);
if (!n) {
pr_err("%s, can't get neighbour of csk->dst.\n", ndev->name);
goto rel_resource;
}
csk->l2t = cxgb4_l2t_get(lldi->l2t, n, ndev, 0);
if (!csk->l2t) {
pr_err("%s, cannot alloc l2t.\n", ndev->name);
......@@ -1335,8 +1334,10 @@ static int init_act_open(struct cxgbi_sock *csk)
if (csk->csk_family == AF_INET)
skb = alloc_wr(size, 0, GFP_NOIO);
#if IS_ENABLED(CONFIG_IPV6)
else
skb = alloc_wr(size6, 0, GFP_NOIO);
#endif
if (!skb)
goto rel_resource;
......@@ -1370,8 +1371,10 @@ static int init_act_open(struct cxgbi_sock *csk)
cxgbi_sock_set_state(csk, CTP_ACTIVE_OPEN);
if (csk->csk_family == AF_INET)
send_act_open_req(csk, skb, csk->l2t);
#if IS_ENABLED(CONFIG_IPV6)
else
send_act_open_req6(csk, skb, csk->l2t);
#endif
neigh_release(n);
return 0;
......@@ -1635,129 +1638,6 @@ static int cxgb4i_ddp_init(struct cxgbi_device *cdev)
return 0;
}
#if IS_ENABLED(CONFIG_IPV6)
static int cxgbi_inet6addr_handler(struct notifier_block *this,
unsigned long event, void *data)
{
struct inet6_ifaddr *ifa = data;
struct net_device *event_dev = ifa->idev->dev;
struct cxgbi_device *cdev;
int ret = NOTIFY_DONE;
if (event_dev->priv_flags & IFF_802_1Q_VLAN)
event_dev = vlan_dev_real_dev(event_dev);
cdev = cxgbi_device_find_by_netdev_rcu(event_dev, NULL);
if (!cdev)
return ret;
switch (event) {
case NETDEV_UP:
ret = cxgb4_clip_get(event_dev,
(const struct in6_addr *)
((ifa)->addr.s6_addr));
if (ret < 0)
return ret;
ret = NOTIFY_OK;
break;
case NETDEV_DOWN:
cxgb4_clip_release(event_dev,
(const struct in6_addr *)
((ifa)->addr.s6_addr));
ret = NOTIFY_OK;
break;
default:
break;
}
return ret;
}
static struct notifier_block cxgbi_inet6addr_notifier = {
.notifier_call = cxgbi_inet6addr_handler
};
/* Retrieve IPv6 addresses from a root device (bond, vlan) associated with
* a physical device.
* The physical device reference is needed to send the actual CLIP command.
*/
static int update_dev_clip(struct net_device *root_dev, struct net_device *dev)
{
struct inet6_dev *idev = NULL;
struct inet6_ifaddr *ifa;
int ret = 0;
idev = __in6_dev_get(root_dev);
if (!idev)
return ret;
read_lock_bh(&idev->lock);
list_for_each_entry(ifa, &idev->addr_list, if_list) {
pr_info("updating the clip for addr %pI6\n",
ifa->addr.s6_addr);
ret = cxgb4_clip_get(dev, (const struct in6_addr *)
ifa->addr.s6_addr);
if (ret < 0)
break;
}
read_unlock_bh(&idev->lock);
return ret;
}
static int update_root_dev_clip(struct net_device *dev)
{
struct net_device *root_dev = NULL;
int i, ret = 0;
/* First populate the real net device's IPv6 address */
ret = update_dev_clip(dev, dev);
if (ret)
return ret;
/* Parse all bond and vlan devices layered on top of the physical dev */
root_dev = netdev_master_upper_dev_get(dev);
if (root_dev) {
ret = update_dev_clip(root_dev, dev);
if (ret)
return ret;
}
for (i = 0; i < VLAN_N_VID; i++) {
root_dev = __vlan_find_dev_deep_rcu(dev, htons(ETH_P_8021Q), i);
if (!root_dev)
continue;
ret = update_dev_clip(root_dev, dev);
if (ret)
break;
}
return ret;
}
static void cxgbi_update_clip(struct cxgbi_device *cdev)
{
int i;
rcu_read_lock();
for (i = 0; i < cdev->nports; i++) {
struct net_device *dev = cdev->ports[i];
int ret = 0;
if (dev)
ret = update_root_dev_clip(dev);
if (ret < 0)
break;
}
rcu_read_unlock();
}
#endif /* IS_ENABLED(CONFIG_IPV6) */
static void *t4_uld_add(const struct cxgb4_lld_info *lldi)
{
struct cxgbi_device *cdev;
......@@ -1876,10 +1756,6 @@ static int t4_uld_state_change(void *handle, enum cxgb4_state state)
switch (state) {
case CXGB4_STATE_UP:
pr_info("cdev 0x%p, UP.\n", cdev);
#if IS_ENABLED(CONFIG_IPV6)
cxgbi_update_clip(cdev);
#endif
/* re-initialize */
break;
case CXGB4_STATE_START_RECOVERY:
pr_info("cdev 0x%p, RECOVERY.\n", cdev);
......@@ -1910,17 +1786,11 @@ static int __init cxgb4i_init_module(void)
return rc;
cxgb4_register_uld(CXGB4_ULD_ISCSI, &cxgb4i_uld_info);
#if IS_ENABLED(CONFIG_IPV6)
register_inet6addr_notifier(&cxgbi_inet6addr_notifier);
#endif
return 0;
}
static void __exit cxgb4i_exit_module(void)
{
#if IS_ENABLED(CONFIG_IPV6)
unregister_inet6addr_notifier(&cxgbi_inet6addr_notifier);
#endif
cxgb4_unregister_uld(CXGB4_ULD_ISCSI);
cxgbi_device_unregister_all(CXGBI_FLAG_DEV_T4);
cxgbi_iscsi_cleanup(&cxgb4i_iscsi_transport, &cxgb4i_stt);
......
......@@ -275,6 +275,7 @@ struct cxgbi_device *cxgbi_device_find_by_netdev_rcu(struct net_device *ndev,
}
EXPORT_SYMBOL_GPL(cxgbi_device_find_by_netdev_rcu);
#if IS_ENABLED(CONFIG_IPV6)
static struct cxgbi_device *cxgbi_device_find_by_mac(struct net_device *ndev,
int *port)
{
......@@ -307,6 +308,7 @@ static struct cxgbi_device *cxgbi_device_find_by_mac(struct net_device *ndev,
ndev, ndev->name);
return NULL;
}
#endif
void cxgbi_hbas_remove(struct cxgbi_device *cdev)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册