提交 2e74eba3 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] Fix invalid __init in ALSA ISA drivers

Replaced invalid __init with __devinit in snd-sbawe and snd-opl3sa2
drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 3f3488b8
......@@ -221,7 +221,7 @@ static void snd_opl3sa2_write(struct snd_opl3sa2 *chip, unsigned char reg, unsig
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
static int __init snd_opl3sa2_detect(struct snd_opl3sa2 *chip)
static int __devinit snd_opl3sa2_detect(struct snd_opl3sa2 *chip)
{
struct snd_card *card;
unsigned long port;
......@@ -489,7 +489,7 @@ static void snd_opl3sa2_master_free(struct snd_kcontrol *kcontrol)
chip->master_volume = NULL;
}
static int __init snd_opl3sa2_mixer(struct snd_opl3sa2 *chip)
static int __devinit snd_opl3sa2_mixer(struct snd_opl3sa2 *chip)
{
struct snd_card *card = chip->card;
struct snd_ctl_elem_id id1, id2;
......@@ -583,8 +583,8 @@ static int snd_opl3sa2_resume(struct snd_card *card)
#endif /* CONFIG_PM */
#ifdef CONFIG_PNP
static int __init snd_opl3sa2_pnp(int dev, struct snd_opl3sa2 *chip,
struct pnp_dev *pdev)
static int __devinit snd_opl3sa2_pnp(int dev, struct snd_opl3sa2 *chip,
struct pnp_dev *pdev)
{
struct pnp_resource_table * cfg;
int err;
......@@ -862,7 +862,7 @@ static struct pnp_card_driver opl3sa2_pnpc_driver = {
};
#endif /* CONFIG_PNP */
static int __init snd_opl3sa2_nonpnp_probe(struct platform_device *pdev)
static int __devinit snd_opl3sa2_nonpnp_probe(struct platform_device *pdev)
{
struct snd_card *card;
int err;
......
......@@ -131,7 +131,7 @@ snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode)
/*
*/
static void __init
static void __devinit
snd_emu8000_read_wait(struct snd_emu8000 *emu)
{
while ((EMU8000_SMALR_READ(emu) & 0x80000000) != 0) {
......@@ -143,7 +143,7 @@ snd_emu8000_read_wait(struct snd_emu8000 *emu)
/*
*/
static void __init
static void __devinit
snd_emu8000_write_wait(struct snd_emu8000 *emu)
{
while ((EMU8000_SMALW_READ(emu) & 0x80000000) != 0) {
......@@ -156,7 +156,7 @@ snd_emu8000_write_wait(struct snd_emu8000 *emu)
/*
* detect a card at the given port
*/
static int __init
static int __devinit
snd_emu8000_detect(struct snd_emu8000 *emu)
{
/* Initialise */
......@@ -182,7 +182,7 @@ snd_emu8000_detect(struct snd_emu8000 *emu)
/*
* intiailize audio channels
*/
static void __init
static void __devinit
init_audio(struct snd_emu8000 *emu)
{
int ch;
......@@ -223,7 +223,7 @@ init_audio(struct snd_emu8000 *emu)
/*
* initialize DMA address
*/
static void __init
static void __devinit
init_dma(struct snd_emu8000 *emu)
{
EMU8000_SMALR_WRITE(emu, 0);
......@@ -327,7 +327,7 @@ static unsigned short init4[128] /*__devinitdata*/ = {
* Taken from the oss driver, not obvious from the doc how this
* is meant to work
*/
static void __init
static void __devinit
send_array(struct snd_emu8000 *emu, unsigned short *data, int size)
{
int i;
......@@ -349,7 +349,7 @@ send_array(struct snd_emu8000 *emu, unsigned short *data, int size)
* Send initialization arrays to start up, this just follows the
* initialisation sequence in the adip.
*/
static void __init
static void __devinit
init_arrays(struct snd_emu8000 *emu)
{
send_array(emu, init1, ARRAY_SIZE(init1)/4);
......@@ -375,7 +375,7 @@ init_arrays(struct snd_emu8000 *emu)
* seems that the only way to do this is to use the one channel and keep
* reallocating between read and write.
*/
static void __init
static void __devinit
size_dram(struct snd_emu8000 *emu)
{
int i, size;
......@@ -500,7 +500,7 @@ snd_emu8000_init_fm(struct snd_emu8000 *emu)
/*
* The main initialization routine.
*/
static void __init
static void __devinit
snd_emu8000_init_hw(struct snd_emu8000 *emu)
{
int i;
......@@ -1019,7 +1019,7 @@ static struct snd_kcontrol_new *mixer_defs[EMU8000_NUM_CONTROLS] = {
/*
* create and attach mixer elements for WaveTable treble/bass controls
*/
static int __init
static int __devinit
snd_emu8000_create_mixer(struct snd_card *card, struct snd_emu8000 *emu)
{
int i, err = 0;
......@@ -1069,7 +1069,7 @@ static int snd_emu8000_dev_free(struct snd_device *device)
/*
* initialize and register emu8000 synth device.
*/
int __init
int __devinit
snd_emu8000_new(struct snd_card *card, int index, long port, int seq_ports,
struct snd_seq_device **awe_ret)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册