Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 29dd3609 编写于 作者: E Eric Moore 提交者： James Bottomley
浏览文件
操作

[SCSI] mpt fusion: standardize printks and debug info 

Standardize all prints using common MYIOC_s_XXX_FMT macro defined in mptbase.h. Currently the driver uses several different methods to display info, where in some cases the "controller name" generating the printk is not provided.
Signed-off-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 685b9e02
展开全部 隐藏空白更改
内联 并排
Showing with 505 addition and 464 deletion
drivers/message/fusion/mptbase.c
浏览文件 @ 29dd3609
此差异已折叠。
drivers/message/fusion/mptctl.c
浏览文件 @ 29dd3609
此差异已折叠。
drivers/message/fusion/mptfc.c
浏览文件 @ 29dd3609
......@@ -204,7 +204,7 @@ mptfc_block_error_handler(struct scsi_cmnd *SCpnt,
"DID_IMM_RETRY, deferring %s recovery.\n",
((MPT_SCSI_HOST *) shost->hostdata)->ioc->name,
((MPT_SCSI_HOST *) shost->hostdata)->ioc->sh->host_no,
SCpnt->device->id,SCpnt->device->lun,caller));
SCpnt->device->id, SCpnt->device->lun, caller));
msleep(1000);
spin_lock_irqsave(shost->host_lock, flags);
}
......@@ -216,7 +216,7 @@ mptfc_block_error_handler(struct scsi_cmnd *SCpnt,
"port state %d, vdev %p.\n", caller,
((MPT_SCSI_HOST *) shost->hostdata)->ioc->name,
((MPT_SCSI_HOST *) shost->hostdata)->ioc->sh->host_no,
SCpnt->device->id,SCpnt->device->lun,ready,
SCpnt->device->id, SCpnt->device->lun, ready,
SCpnt->device->hostdata));
return FAILED;
}
......@@ -224,7 +224,7 @@ mptfc_block_error_handler(struct scsi_cmnd *SCpnt,
"%s.%d: %d:%d, executing recovery.\n", caller,
((MPT_SCSI_HOST *) shost->hostdata)->ioc->name,
((MPT_SCSI_HOST *) shost->hostdata)->ioc->sh->host_no,
SCpnt->device->id,SCpnt->device->lun));
SCpnt->device->id, SCpnt->device->lun));
return (*func)(SCpnt);
}
......@@ -1320,8 +1320,8 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sh->transportt = mptfc_transport_template;
error = scsi_add_host (sh, &ioc->pcidev->dev);
if(error) {
dprintk(ioc, printk(KERN_ERR MYNAM
"scsi_add_host failed\n"));
dprintk(ioc, printk(MYIOC_s_ERR_FMT
"scsi_add_host failed\n", ioc->name));
goto out_mptfc_probe;
}
......
drivers/message/fusion/mptsas.c
浏览文件 @ 29dd3609
......@@ -100,19 +100,25 @@ static void mptsas_hotplug_work(struct work_struct *work);
static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
{
dsasprintk(ioc, printk(KERN_DEBUG "---- IO UNIT PAGE 0 ------------\n"));
dsasprintk(ioc, printk(KERN_DEBUG "Handle=0x%X\n",
le16_to_cpu(phy_data->AttachedDeviceHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Controller Handle=0x%X\n",
le16_to_cpu(phy_data->ControllerDevHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Port=0x%X\n", phy_data->Port));
dsasprintk(ioc, printk(KERN_DEBUG "Port Flags=0x%X\n", phy_data->PortFlags));
dsasprintk(ioc, printk(KERN_DEBUG "PHY Flags=0x%X\n", phy_data->PhyFlags));
dsasprintk(ioc, printk(KERN_DEBUG "Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate));
dsasprintk(ioc, printk(KERN_DEBUG "Controller PHY Device Info=0x%X\n",
le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
dsasprintk(ioc, printk(KERN_DEBUG "DiscoveryStatus=0x%X\n\n",
le32_to_cpu(phy_data->DiscoveryStatus)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"---- IO UNIT PAGE 0 ------------\n", ioc->name));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n",
ioc->name, le16_to_cpu(phy_data->ControllerDevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n",
ioc->name, phy_data->Port));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n",
ioc->name, phy_data->PortFlags));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n",
ioc->name, phy_data->PhyFlags));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
ioc->name, phy_data->NegotiatedLinkRate));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Controller PHY Device Info=0x%X\n", ioc->name,
le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n",
ioc->name, le32_to_cpu(phy_data->DiscoveryStatus)));
}
static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0)
......@@ -121,27 +127,41 @@ static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0)
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
dsasprintk(ioc, printk(KERN_DEBUG "---- SAS PHY PAGE 0 ------------\n"));
dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Handle=0x%X\n",
le16_to_cpu(pg0->AttachedDevHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "SAS Address=0x%llX\n",
(unsigned long long)le64_to_cpu(sas_address)));
dsasprintk(ioc, printk(KERN_DEBUG "Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier));
dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Info=0x%X\n",
le32_to_cpu(pg0->AttachedDeviceInfo)));
dsasprintk(ioc, printk(KERN_DEBUG "Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate));
dsasprintk(ioc, printk(KERN_DEBUG "Change Count=0x%X\n", pg0->ChangeCount));
dsasprintk(ioc, printk(KERN_DEBUG "PHY Info=0x%X\n\n", le32_to_cpu(pg0->PhyInfo)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"---- SAS PHY PAGE 0 ------------\n", ioc->name));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Attached Device Handle=0x%X\n", ioc->name,
le16_to_cpu(pg0->AttachedDevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Attached PHY Identifier=0x%X\n", ioc->name,
pg0->AttachedPhyIdentifier));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n",
ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
ioc->name, pg0->ProgrammedLinkRate));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n",
ioc->name, pg0->ChangeCount));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n",
ioc->name, le32_to_cpu(pg0->PhyInfo)));
}
static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1)
{
dsasprintk(ioc, printk(KERN_DEBUG "---- SAS PHY PAGE 1 ------------\n"));
dsasprintk(ioc, printk(KERN_DEBUG "Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount));
dsasprintk(ioc, printk(KERN_DEBUG "Running Disparity Error Count=0x%x\n",
pg1->RunningDisparityErrorCount));
dsasprintk(ioc, printk(KERN_DEBUG "Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount));
dsasprintk(ioc, printk(KERN_DEBUG "PHY Reset Problem Count=0x%x\n\n", pg1->PhyResetProblemCount));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"---- SAS PHY PAGE 1 ------------\n", ioc->name));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n",
ioc->name, pg1->InvalidDwordCount));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Running Disparity Error Count=0x%x\n", ioc->name,
pg1->RunningDisparityErrorCount));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Loss Dword Synch Count=0x%x\n", ioc->name,
pg1->LossDwordSynchCount));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"PHY Reset Problem Count=0x%x\n\n", ioc->name,
pg1->PhyResetProblemCount));
}
static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0)
......@@ -150,37 +170,53 @@ static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0)
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
dsasprintk(ioc, printk(KERN_DEBUG "---- SAS DEVICE PAGE 0 ---------\n"));
dsasprintk(ioc, printk(KERN_DEBUG "Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Slot=0x%X\n", le16_to_cpu(pg0->Slot)));
dsasprintk(ioc, printk(KERN_DEBUG "SAS Address=0x%llX\n", (unsigned long long)
le64_to_cpu(sas_address)));
dsasprintk(ioc, printk(KERN_DEBUG "Target ID=0x%X\n", pg0->TargetID));
dsasprintk(ioc, printk(KERN_DEBUG "Bus=0x%X\n", pg0->Bus));
/* The PhyNum field specifies the PHY number of the parent
* device this device is linked to
*/
dsasprintk(ioc, printk(KERN_DEBUG "Parent Phy Num=0x%X\n", pg0->PhyNum));
dsasprintk(ioc, printk(KERN_DEBUG "Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)));
dsasprintk(ioc, printk(KERN_DEBUG "Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)));
dsasprintk(ioc, printk(KERN_DEBUG "Flags=0x%X\n", le16_to_cpu(pg0->Flags)));
dsasprintk(ioc, printk(KERN_DEBUG "Physical Port=0x%X\n\n", pg0->PhysicalPort));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"---- SAS DEVICE PAGE 0 ---------\n", ioc->name));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
ioc->name, le16_to_cpu(pg0->DevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n",
ioc->name, le16_to_cpu(pg0->ParentDevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n",
ioc->name, le16_to_cpu(pg0->EnclosureHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n",
ioc->name, le16_to_cpu(pg0->Slot)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n",
ioc->name, pg0->TargetID));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n",
ioc->name, pg0->Bus));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n",
ioc->name, pg0->PhyNum));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n",
ioc->name, le16_to_cpu(pg0->AccessStatus)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n",
ioc->name, le32_to_cpu(pg0->DeviceInfo)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n",
ioc->name, le16_to_cpu(pg0->Flags)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n",
ioc->name, pg0->PhysicalPort));
}
static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
{
dsasprintk(ioc, printk(KERN_DEBUG "---- SAS EXPANDER PAGE 1 ------------\n"));
dsasprintk(ioc, printk(KERN_DEBUG "Physical Port=0x%X\n", pg1->PhysicalPort));
dsasprintk(ioc, printk(KERN_DEBUG "PHY Identifier=0x%X\n", pg1->PhyIdentifier));
dsasprintk(ioc, printk(KERN_DEBUG "Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate));
dsasprintk(ioc, printk(KERN_DEBUG "Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate));
dsasprintk(ioc, printk(KERN_DEBUG "Hardware Link Rate=0x%X\n", pg1->HwLinkRate));
dsasprintk(ioc, printk(KERN_DEBUG "Owner Device Handle=0x%X\n",
le16_to_cpu(pg1->OwnerDevHandle)));
dsasprintk(ioc, printk(KERN_DEBUG "Attached Device Handle=0x%X\n\n",
le16_to_cpu(pg1->AttachedDevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"---- SAS EXPANDER PAGE 1 ------------\n", ioc->name));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n",
ioc->name, pg1->PhysicalPort));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n",
ioc->name, pg1->PhyIdentifier));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
ioc->name, pg1->NegotiatedLinkRate));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
ioc->name, pg1->ProgrammedLinkRate));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n",
ioc->name, pg1->HwLinkRate));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n",
ioc->name, le16_to_cpu(pg1->OwnerDevHandle)));
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Attached Device Handle=0x%X\n\n", ioc->name,
le16_to_cpu(pg1->AttachedDevHandle)));
}
static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
......@@ -250,8 +286,8 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
port_info = port_details->port_info;
phy_info = port_info->phy_info;
dsaswideprintk(ioc, printk(KERN_DEBUG "%s: [%p]: num_phys=%02d "
"bitmask=0x%016llX\n", __FUNCTION__, port_details,
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
"bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
port_details->num_phys, (unsigned long long)
port_details->phy_bitmask));
......@@ -278,14 +314,15 @@ mptsas_set_rphy(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_rp
{
if (phy_info->port_details) {
phy_info->port_details->rphy = rphy;
dsaswideprintk(ioc, printk(KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n",
ioc->name, rphy));
}
if (rphy) {
dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
&rphy->dev, "add:"));
dsaswideprintk(ioc, printk(KERN_DEBUG "rphy=%p release=%p\n",
rphy, rphy->dev.release));
dsaswideprintk(ioc, dev_printk(MYIOC_s_DEBUG_FMT,
&rphy->dev, "add:", ioc->name));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n",
ioc->name, rphy, rphy->dev.release));
}
}
......@@ -305,10 +342,10 @@ mptsas_set_port(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_po
phy_info->port_details->port = port;
if (port) {
dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
&port->dev, "add:"));
dsaswideprintk(ioc, printk(KERN_DEBUG "port=%p release=%p\n",
port, port->dev.release));
dsaswideprintk(ioc, dev_printk(MYIOC_s_DEBUG_FMT,
&port->dev, "add:", ioc->name));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n",
ioc->name, port, port->dev.release));
}
}
......@@ -359,9 +396,9 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
* Removing a phy from a port, letting the last
* phy be removed by firmware events.
*/
dsaswideprintk(ioc, printk(KERN_DEBUG
"%s: [%p]: deleting phy = %d\n",
__FUNCTION__, port_details, i));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"%s: [%p]: deleting phy = %d\n",
ioc->name, __FUNCTION__, port_details, i));
port_details->num_phys--;
port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
......@@ -375,8 +412,8 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
phy_info = port_info->phy_info;
for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
sas_address = phy_info->attached.sas_address;
dsaswideprintk(ioc, printk(KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
i, (unsigned long long)sas_address));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n",
ioc->name, i, (unsigned long long)sas_address));
if (!sas_address)
continue;
port_details = phy_info->port_details;
......@@ -394,9 +431,9 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
port_details->phy_bitmask |=
(1 << phy_info->phy_id);
phy_info->sas_port_add_phy=1;
dsaswideprintk(ioc, printk(KERN_DEBUG "\t\tForming port\n\t\t"
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t"
"phy_id=%d sas_address=0x%018llX\n",
i, (unsigned long long)sas_address));
ioc->name, i, (unsigned long long)sas_address));
phy_info->port_details = port_details;
}
......@@ -411,9 +448,9 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
continue;
if (phy_info_cmp->port_details == port_details )
continue;
dsaswideprintk(ioc, printk(KERN_DEBUG
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"\t\tphy_id=%d sas_address=0x%018llX\n",
j, (unsigned long long)
ioc->name, j, (unsigned long long)
phy_info_cmp->attached.sas_address));
if (phy_info_cmp->port_details) {
port_details->rphy =
......@@ -445,15 +482,15 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
port_details = port_info->phy_info[i].port_details;
if (!port_details)
continue;
dsaswideprintk(ioc, printk(KERN_DEBUG
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"%s: [%p]: phy_id=%02d num_phys=%02d "
"bitmask=0x%016llX\n", __FUNCTION__,
"bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
port_details, i, port_details->num_phys,
(unsigned long long)port_details->phy_bitmask));
dsaswideprintk(ioc, printk(KERN_DEBUG"\t\tport = %p rphy=%p\n",
port_details->port, port_details->rphy));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
ioc->name, port_details->port, port_details->rphy));
}
dsaswideprintk(ioc, printk(KERN_DEBUG"\n"));
dsaswideprintk(ioc, printk("\n"));
mutex_unlock(&ioc->sas_topology_mutex);
}
......@@ -1129,10 +1166,8 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
/* process the completed Reply Message Frame */
reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
__FUNCTION__,
reply->IOCStatus,
reply->IOCLogInfo);
printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
error = -ENXIO;
goto out_unlock;
}
......@@ -1218,16 +1253,16 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
u64 sas_address = 0;
if (!rsp) {
printk(KERN_ERR "%s: the smp response space is missing\n",
__FUNCTION__);
printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
ioc->name, __FUNCTION__);
return -EINVAL;
}
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(KERN_ERR "%s: multiple segments req %u %u, rsp %u %u\n",
__FUNCTION__, req->bio->bi_vcnt, req->data_len,
rsp->bio->bi_vcnt, rsp->data_len);
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
rsp->bio->bi_vcnt, rsp->data_len);
return -EINVAL;
}
......@@ -1292,7 +1327,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
if (!timeleft) {
printk(KERN_ERR "%s: smp timeout!\n", __FUNCTION__);
printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
/* On timeout reset the board */
mpt_HardResetHandler(ioc, CAN_SLEEP);
ret = -ETIMEDOUT;
......@@ -1307,8 +1342,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
memcpy(req->sense, smprep, sizeof(*smprep));
req->sense_len = sizeof(*smprep);
} else {
printk(KERN_ERR "%s: smp passthru reply failed to be returned\n",
__FUNCTION__);
printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
ioc->name, __FUNCTION__);
ret = -ENXIO;
}
unmap:
......@@ -1952,12 +1987,12 @@ static int mptsas_probe_one_phy(struct device *dev,
goto out;
}
mptsas_set_port(ioc, phy_info, port);
dsaswideprintk(ioc, printk(KERN_DEBUG
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"sas_port_alloc: port=%p dev=%p port_id=%d\n",
port, dev, port->port_identifier));
ioc->name, port, dev, port->port_identifier));
}
dsaswideprintk(ioc, printk(KERN_DEBUG "sas_port_add_phy: phy_id=%d\n",
phy_info->phy_id));
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
ioc->name, phy_info->phy_id));
sas_port_add_phy(port, phy_info->phy);
phy_info->sas_port_add_phy = 0;
}
......@@ -2259,8 +2294,8 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
expander_sas_address)
continue;
dsaswideprintk(ioc,
dev_printk(KERN_DEBUG, &port->dev,
"delete port (%d)\n", port->port_identifier));
dev_printk(MYIOC_s_DEBUG_FMT, &port->dev,
"delete port (%d)\n", ioc->name, port->port_identifier));
sas_port_delete(port);
mptsas_port_delete(ioc, phy_info->port_details);
}
......@@ -2503,7 +2538,7 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
goto out;
}
......@@ -2644,8 +2679,8 @@ mptsas_hotplug_work(struct work_struct *work)
printk(MYIOC_s_INFO_FMT
"removing %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
dev_printk(KERN_DEBUG, &port->dev,
"delete port (%d)\n", port->port_identifier);
dev_printk(MYIOC_s_DEBUG_FMT, &port->dev,
"delete port (%d)\n", ioc->name, port->port_identifier);
sas_port_delete(port);
mptsas_port_delete(ioc, phy_info->port_details);
break;
......@@ -2686,8 +2721,8 @@ mptsas_hotplug_work(struct work_struct *work)
if (!vtarget) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
"%s: exit at line=%d\n", ioc->name,
__FUNCTION__, __LINE__));
"%s: exit at line=%d\n", ioc->name,
__FUNCTION__, __LINE__));
break;
}
/*
......@@ -2820,7 +2855,7 @@ mptsas_send_sas_event(MPT_ADAPTER *ioc,
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
break;
}
......@@ -2879,7 +2914,7 @@ mptsas_send_raid_event(MPT_ADAPTER *ioc,
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
return;
}
......@@ -3230,8 +3265,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
error = scsi_add_host(sh, &ioc->pcidev->dev);
if (error) {
dprintk(ioc, printk(KERN_ERR MYNAM
"scsi_add_host failed\n"));
dprintk(ioc, printk(MYIOC_s_ERR_FMT
"scsi_add_host failed\n", ioc->name));
goto out_mptsas_probe;
}
......
drivers/message/fusion/mptscsih.c
浏览文件 @ 29dd3609
......@@ -192,7 +192,7 @@ mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
int chain_idx;
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
ioc->name));
ioc->name));
spin_lock_irqsave(&ioc->FreeQlock, flags);
if (!list_empty(&ioc->FreeChainQ)) {
int offset;
......@@ -203,13 +203,14 @@ mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
chain_idx = offset / ioc->req_sz;
rc = SUCCESS;
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
} else {
rc = FAILED;
chain_idx = MPT_HOST_NO_CHAIN;
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer failed\n",
ioc->name));
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
ioc->name));
}
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
......@@ -419,8 +420,8 @@ mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
* out the Address and Flags fields.
*/
chainSge = (char *) psge;
dsgprintk(ioc, printk(KERN_DEBUG " Current buff @ %p (index 0x%x)",
psge, req_idx));
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
ioc->name, psge, req_idx));
/* Start the SGE for the next buffer
*/
......@@ -428,8 +429,8 @@ mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
sgeOffset = 0;
sg_done = 0;
dsgprintk(ioc, printk(KERN_DEBUG " Chain buff @ %p (index 0x%x)\n",
psge, chain_idx));
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
ioc->name, psge, chain_idx));
/* Start the SGE for the next buffer
*/
......@@ -588,18 +589,17 @@ mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pSc
}
scsi_print_command(sc);
printk(KERN_DEBUG "\tfw_channel = %d, fw_id = %d\n",
pScsiReply->Bus, pScsiReply->TargetID);
printk(KERN_DEBUG "\trequest_len = %d, underflow = %d, resid = %d\n",
scsi_bufflen(sc), sc->underflow, scsi_get_resid(sc));
printk(KERN_DEBUG "\ttag = %d, transfer_count = %d, sc->result = %08X\n",
le16_to_cpu(pScsiReply->TaskTag),
printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d\n",
ioc->name, pScsiReply->Bus, pScsiReply->TargetID);
printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
"resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
scsi_get_resid(sc));
printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
"sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
le32_to_cpu(pScsiReply->TransferCount), sc->result);
printk(KERN_DEBUG "\tiocstatus = %s (0x%04x), "
printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
"scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
desc, ioc_status,
desc1, pScsiReply->SCSIStatus,
ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
pScsiReply->SCSIState);
if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
......@@ -607,9 +607,8 @@ mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pSc
asc = sc->sense_buffer[12];
ascq = sc->sense_buffer[13];
printk(KERN_DEBUG "\t[sense_key,asc,ascq]: "
"[0x%02x,0x%02x,0x%02x]\n",
skey, asc, ascq);
printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
"[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
}
/*
......@@ -617,8 +616,8 @@ mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pSc
*/
if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
pScsiReply->ResponseInfo)
printk(KERN_DEBUG "response_info = %08xh\n",
le32_to_cpu(pScsiReply->ResponseInfo));
printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
}
#endif
......@@ -738,8 +737,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
*/
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
pScsiReply->ResponseInfo) {
printk(KERN_NOTICE "[%d:%d:%d:%d] "
"FCP_ResponseInfo=%08xh\n",
printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%d] "
"FCP_ResponseInfo=%08xh\n", ioc->name,
sc->device->host->host_no, sc->device->channel,
sc->device->id, sc->device->lun,
le32_to_cpu(pScsiReply->ResponseInfo));
......@@ -824,9 +823,9 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
sc->result=DID_SOFT_ERROR << 16;
else /* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
dreplyprintk(ioc, printk(KERN_DEBUG
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
sc->result, sc->device->channel, sc->device->id));
ioc->name, sc->result, sc->device->channel, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
......@@ -858,9 +857,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
}
dreplyprintk(ioc, printk(KERN_DEBUG " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
sc->underflow));
dreplyprintk(ioc, printk(KERN_DEBUG " ActBytesXferd=%02xh\n", xfer_cnt));
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
" sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
ioc->name, sc->underflow));
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
" ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
/* Report Queue Full
*/
......@@ -974,7 +975,7 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
int ii;
int max = ioc->req_depth;
dprintk(ioc, printk(KERN_DEBUG MYNAM ": flush_ScsiLookup called\n"));
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": flush_ScsiLookup called\n", ioc->name));
for (ii= 0; ii < max; ii++) {
if ((SCpnt = hd->ScsiLookup[ii]) != NULL) {
......@@ -986,8 +987,8 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
hd->ScsiLookup[ii] = NULL;
mf = MPT_INDEX_2_MFPTR(ioc, ii);
dmfprintk(ioc, printk(KERN_DEBUG MYNAM ": flush: ScsiDone (mf=%p,sc=%p)\n",
mf, SCpnt));
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": flush: ScsiDone (mf=%p,sc=%p)\n",
ioc->name, mf, SCpnt));
/* Free Chain buffers */
mptscsih_freeChainBuffers(ioc, ii);
......@@ -1036,8 +1037,8 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
struct scsi_cmnd *sc;
struct scsi_lun lun;
dsprintk(hd->ioc, printk(KERN_DEBUG MYNAM ": search_running channel %d id %d lun %d max %d\n",
vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, max));
dsprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT ": search_running channel %d id %d lun %d max %d\n",
hd->ioc->name, vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, max));
for (ii=0; ii < max; ii++) {
if ((sc = hd->ScsiLookup[ii]) != NULL) {
......@@ -1069,8 +1070,8 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
scsi_dma_unmap(sc);
sc->host_scribble = NULL;
sc->result = DID_NO_CONNECT << 16;
sdev_printk(KERN_INFO, sc->device, "completing cmds: fw_channel %d,"
"fw_id %d, sc=%p, mf = %p, idx=%x\n", vdevice->vtarget->channel,
sdev_printk(MYIOC_s_INFO_FMT, sc->device, "completing cmds: fw_channel %d,"
"fw_id %d, sc=%p, mf = %p, idx=%x\n", hd->ioc->name, vdevice->vtarget->channel,
vdevice->vtarget->id, sc, mf, ii);
sc->scsi_done(sc);
}
......@@ -1475,7 +1476,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
ioc->name, SCpnt, mf, my_idx));
DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf)
DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
return 0;
fail:
......@@ -1590,18 +1591,18 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int c
*/
if (mptscsih_tm_pending_wait(hd) == FAILED) {
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
dtmprintk(ioc, printk(KERN_DEBUG MYNAM ": %s: TMHandler abort: "
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler abort: "
"Timed out waiting for last TM (%d) to complete! \n",
ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
dtmprintk(ioc, printk(KERN_DEBUG MYNAM ": %s: TMHandler target "
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler target "
"reset: Timed out waiting for last TM (%d) "
"to complete! \n", ioc->name,
hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
dtmprintk(ioc, printk(KERN_DEBUG MYNAM ": %s: TMHandler bus reset: "
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler bus reset: "
"Timed out waiting for last TM (%d) to complete! \n",
ioc->name, hd->tmPending));
return FAILED;
......@@ -1618,10 +1619,10 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int c
printk(MYIOC_s_WARN_FMT
"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
ioc->name, type, ioc_raw_state);
printk(KERN_WARNING " Issuing HardReset!!\n");
printk(MYIOC_s_WARN_FMT " Issuing HardReset!!\n", ioc->name);
if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
printk((KERN_WARNING "TMHandler: HardReset "
"FAILED!!\n"));
printk(MYIOC_s_WARN_FMT "TMHandler: HardReset "
"FAILED!!\n", ioc->name);
return FAILED;
}
......@@ -1806,8 +1807,8 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
SCpnt->result = DID_RESET << 16;
SCpnt->scsi_done(SCpnt);
printk(KERN_DEBUG MYNAM ": mptscsih_abort: Can't locate "
"host! (sc=%p)\n", SCpnt);
printk(KERN_ERR MYNAM ": task abort: "
"can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
......@@ -1818,8 +1819,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
vdevice = SCpnt->device->hostdata;
if (!vdevice || !vdevice->vtarget) {
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: device has been "
"deleted (sc=%p)\n", ioc->name, SCpnt));
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"task abort: device has been deleted (sc=%p)\n",
ioc->name, SCpnt));
SCpnt->result = DID_NO_CONNECT << 16;
SCpnt->scsi_done(SCpnt);
retval = 0;
......@@ -1829,8 +1831,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
/* Task aborts are not supported for hidden raid components.
*/
if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: hidden raid "
"component (sc=%p)\n", ioc->name, SCpnt));
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"task abort: hidden raid component (sc=%p)\n",
ioc->name, SCpnt));
SCpnt->result = DID_RESET << 16;
retval = FAILED;
goto out;
......@@ -1843,7 +1846,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
* Do OS callback.
*/
SCpnt->result = DID_RESET << 16;
dtmprintk(ioc, printk(KERN_DEBUG MYNAM ": %s: mptscsih_abort: "
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
"Command not in the active list! (sc=%p)\n", ioc->name,
SCpnt));
retval = 0;
......@@ -1908,8 +1911,8 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
/* If we can't locate our host adapter structure, return FAILED status.
*/
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
printk(KERN_DEBUG MYNAM ": mptscsih_dev_reset: Can't "
"locate host! (sc=%p)\n", SCpnt);
printk(KERN_ERR MYNAM ": target reset: "
"Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
......@@ -1971,8 +1974,8 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
/* If we can't locate our host adapter structure, return FAILED status.
*/
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
printk(KERN_DEBUG MYNAM ": mptscsih_bus_reset: Can't "
"locate host! (sc=%p)\n", SCpnt );
printk(KERN_ERR MYNAM ": bus reset: "
"Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
......@@ -2015,8 +2018,8 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
/* If we can't locate the host to reset, then we failed. */
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
printk( KERN_DEBUG MYNAM ": mptscsih_host_reset: Can't "
"locate host! (sc=%p)\n", SCpnt);
printk(KERN_ERR MYNAM ": host reset: "
"Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
......@@ -2229,7 +2232,7 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m
if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
hd->cmdPtr)
if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
printk((KERN_WARNING " Firmware Reload FAILED!!\n"));
printk(MYIOC_s_WARN_FMT " Firmware Reload FAILED!!\n", ioc->name);
break;
case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
......@@ -2576,10 +2579,10 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
unsigned long flags;
int ii;
dtmprintk(ioc, printk(KERN_DEBUG MYNAM
": IOC %s_reset routed to SCSI host driver!\n",
reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
": IOC %s_reset routed to SCSI host driver!\n",
ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
/* If a FW reload request arrives after base installed but
* before all scsi hosts have been attached, then an alt_ioc
......@@ -2719,7 +2722,8 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
case MPI_EVENT_STATE_CHANGE: /* 02 */
case MPI_EVENT_EVENT_CHANGE: /* 0A */
default:
dprintk(ioc, printk(KERN_DEBUG MYNAM ": Ignoring event (=%02Xh)\n", event));
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": Ignoring event (=%02Xh)\n",
ioc->name, event));
break;
}
......@@ -2852,8 +2856,8 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
SCSI_STD_SENSE_BYTES);
memcpy(hd->pLocal->sense, sense_data, sz);
ddvprintk(ioc, printk(KERN_DEBUG " Check Condition, sense ptr %p\n",
sense_data));
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Check Condition, sense ptr %p\n",
ioc->name, sense_data));
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
if (pReq->CDB[0] == INQUIRY)
completionCode = MPT_SCANDV_ISSUE_SENSE;
......@@ -3085,8 +3089,8 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
/* Get and Populate a free Frame
*/
if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "No msg frames!\n",
hd->ioc->name));
dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT "No msg frames!\n",
hd->ioc->name));
return -EBUSY;
}
......
drivers/message/fusion/mptspi.c
浏览文件 @ 29dd3609
......@@ -139,8 +139,9 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
factor = MPT_ULTRA320;
if (scsi_device_qas(sdev)) {
ddvprintk(hd->ioc,
printk(KERN_DEBUG "Enabling QAS due to "
"byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to "
"byte56=%02x on id=%d!\n", hd->ioc->name,
scsi_device_qas(sdev), id));
noQas = 0;
}
if (sdev->type == TYPE_TAPE &&
......@@ -227,8 +228,8 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
/* Disable QAS in a mixed configuration case
*/
ddvprintk(hd->ioc, printk(KERN_DEBUG
"Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT
"Disabling QAS due to noQas=%02x on id=%d!\n", hd->ioc->name, noQas, id));
}
}
......@@ -302,7 +303,7 @@ mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
......@@ -425,8 +426,8 @@ static int mptspi_target_alloc(struct scsi_target *starget)
if (starget->channel == 0 &&
mptspi_is_raid(hd, starget->id)) {
vtarget->raidVolume = 1;
ddvprintk(hd->ioc, printk(KERN_DEBUG
"RAID Volume @ channel=%d id=%d\n", starget->channel,
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT
"RAID Volume @ channel=%d id=%d\n", hd->ioc->name, starget->channel,
starget->id));
}
......@@ -532,7 +533,8 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg0_dma, GFP_KERNEL);
if (pg0 == NULL) {
starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n");
starget_printk(MYIOC_s_ERR_FMT, starget,
"dma_alloc_coherent for parameters failed\n", ioc->name);
return -EINVAL;
}
......@@ -552,7 +554,7 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
cfg.pageAddr = starget->id;
if (mpt_config(ioc, &cfg)) {
starget_printk(KERN_ERR, starget, "mpt_config failed\n");
starget_printk(MYIOC_s_ERR_FMT, starget, "mpt_config failed\n", ioc->name);
goto out_free;
}
err = 0;
......@@ -673,8 +675,8 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
/* If this is a piece of a RAID, then quiesce first */
if (sdev->channel == 1 &&
mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) {
starget_printk(KERN_ERR, scsi_target(sdev),
"Integrated RAID quiesce failed\n");
starget_printk(MYIOC_s_ERR_FMT, scsi_target(sdev),
"Integrated RAID quiesce failed\n", hd->ioc->name);
return;
}
......@@ -684,8 +686,8 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
if (sdev->channel == 1 &&
mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
starget_printk(KERN_ERR, scsi_target(sdev),
"Integrated RAID resume failed\n");
starget_printk(MYIOC_s_ERR_FMT, scsi_target(sdev),
"Integrated RAID resume failed\n", hd->ioc->name);
mptspi_read_parameters(sdev->sdev_target);
spi_display_xfer_agreement(sdev->sdev_target);
......@@ -847,7 +849,8 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL);
if (pg1 == NULL) {
starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n");
starget_printk(MYIOC_s_ERR_FMT, starget,
"dma_alloc_coherent for parameters failed\n", ioc->name);
return -EINVAL;
}
......@@ -876,7 +879,8 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
if (mpt_config(ioc, &cfg)) {
starget_printk(KERN_ERR, starget, "mpt_config failed\n");
starget_printk(MYIOC_s_ERR_FMT, starget,
"mpt_config failed\n", ioc->name);
goto out_free;
}
err = 0;
......@@ -1092,12 +1096,12 @@ static void mpt_work_wrapper(struct work_struct *work)
if(vtarget->id != disk)
continue;
starget_printk(KERN_INFO, vtarget->starget,
"Integrated RAID requests DV of new device\n");
starget_printk(MYIOC_s_INFO_FMT, vtarget->starget,
"Integrated RAID requests DV of new device\n", hd->ioc->name);
mptspi_dv_device(hd, sdev);
}
shost_printk(KERN_INFO, shost,
"Integrated RAID detects new device %d\n", disk);
shost_printk(MYIOC_s_INFO_FMT, shost,
"Integrated RAID detects new device %d\n", hd->ioc->name, disk);
scsi_scan_target(&hd->ioc->sh->shost_gendev, 1, disk, 0, 1);
}
......@@ -1107,9 +1111,9 @@ static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk)
struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
if (!wqw) {
shost_printk(KERN_ERR, hd->ioc->sh,
"Failed to act on RAID event for physical disk %d\n",
disk);
shost_printk(MYIOC_s_ERR_FMT, hd->ioc->sh,
"Failed to act on RAID event for physical disk %d\n",
hd->ioc->name, disk);
return;
}
INIT_WORK(&wqw->work, mpt_work_wrapper);
......@@ -1418,7 +1422,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (numSGE < sh->sg_tablesize) {
/* Reset this value */
dprintk(ioc, printk(MYIOC_s_INFO_FMT
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Resetting sg_tablesize to %d from %d\n",
ioc->name, numSGE, sh->sg_tablesize));
sh->sg_tablesize = numSGE;
......@@ -1484,8 +1488,8 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
error = scsi_add_host (sh, &ioc->pcidev->dev);
if(error) {
dprintk(ioc, printk(KERN_ERR MYNAM
"scsi_add_host failed\n"));
dprintk(ioc, printk(MYIOC_s_ERR_FMT
"scsi_add_host failed\n", ioc->name));
goto out_mptspi_probe;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或