提交 1ef6ce7a 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: allow 4 coldfire serial ports
  m68knommu: fix coldfire tcdrain
  m68knommu: remove a duplicate vector setting line for 68360
  Fix m68k-uclinux's rt_sigreturn trampoline
  m68knommu: correct the CC flags for Coldfire M5272 targets
  uclinux: error message when FLAT reloc symbol is invalid, v2
......@@ -212,5 +212,10 @@ struct mcf_platform_uart {
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
#if defined(CONFIG_M5272)
#define MCFUART_TXFIFOSIZE 25
#else
#define MCFUART_TXFIFOSIZE 1
#endif
/****************************************************************************/
#endif /* mcfuart_h */
......@@ -94,7 +94,7 @@ cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5271,-m5200)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)
......
......@@ -145,6 +145,6 @@ ENTRY(ret_from_user_signal)
trap #0
ENTRY(ret_from_user_rt_signal)
move #__NR_rt_sigreturn,%d0
movel #__NR_rt_sigreturn,%d0
trap #0
......@@ -107,7 +107,6 @@ void init_IRQ(void)
_ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
_ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
_ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
_ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* reserved */
_ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
_ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
_ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */
......
......@@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
}
spin_lock_irqsave(&port->lock, flags);
uart_update_timeout(port, termios->c_cflag, baud);
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
......@@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
static void mcf_config_port(struct uart_port *port, int flags)
{
port->type = PORT_MCF;
port->fifosize = MCFUART_TXFIFOSIZE;
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
......@@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
/*
* Define the basic serial functions we support.
*/
static struct uart_ops mcf_uart_ops = {
static const struct uart_ops mcf_uart_ops = {
.tx_empty = mcf_tx_empty,
.get_mctrl = mcf_get_mctrl,
.set_mctrl = mcf_set_mctrl,
......@@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = {
.verify_port = mcf_verify_port,
};
static struct mcf_uart mcf_ports[3];
static struct mcf_uart mcf_ports[4];
#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
......
......@@ -355,7 +355,7 @@ calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp)
if (!flat_reloc_valid(r, start_brk - start_data + text_len)) {
printk("BINFMT_FLAT: reloc outside program 0x%x (0 - 0x%x/0x%x)",
(int) r,(int)(start_brk-start_code),(int)text_len);
(int) r,(int)(start_brk-start_data+text_len),(int)text_len);
goto failed;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册