提交 1d677a6d 编写于 作者: K Krzysztof Helt 提交者: Linus Torvalds

pm3fb: hardware cursor support

This patch adds hardware cursor support to the pm3fb driver.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 8f5d050a
......@@ -55,6 +55,7 @@
/*
* Driver data
*/
static int hwcursor = 1;
static char *mode_option __devinitdata;
static int noaccel __devinitdata;
......@@ -604,6 +605,117 @@ static void pm3fb_imageblit(struct fb_info *info, const struct fb_image *image)
}
/* end of acceleration functions */
/*
* Hardware Cursor support.
*/
static const u8 cursor_bits_lookup[16] = {
0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54,
0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55
};
static int pm3fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct pm3_par *par = info->par;
u8 mode;
if (!hwcursor)
return -EINVAL; /* just to force soft_cursor() call */
/* Too large of a cursor or wrong bpp :-( */
if (cursor->image.width > 64 ||
cursor->image.height > 64 ||
cursor->image.depth > 1)
return -EINVAL;
mode = PM3RD_CursorMode_TYPE_X;
if (cursor->enable)
mode |= PM3RD_CursorMode_CURSOR_ENABLE;
PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, mode);
/*
* If the cursor is not be changed this means either we want the
* current cursor state (if enable is set) or we want to query what
* we can do with the cursor (if enable is not set)
*/
if (!cursor->set)
return 0;
if (cursor->set & FB_CUR_SETPOS) {
int x = cursor->image.dx - info->var.xoffset;
int y = cursor->image.dy - info->var.yoffset;
PM3_WRITE_DAC_REG(par, PM3RD_CursorXLow, x & 0xff);
PM3_WRITE_DAC_REG(par, PM3RD_CursorXHigh, (x >> 8) & 0xf);
PM3_WRITE_DAC_REG(par, PM3RD_CursorYLow, y & 0xff);
PM3_WRITE_DAC_REG(par, PM3RD_CursorYHigh, (y >> 8) & 0xf);
}
if (cursor->set & FB_CUR_SETHOT) {
PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotX,
cursor->hot.x & 0x3f);
PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotY,
cursor->hot.y & 0x3f);
}
if (cursor->set & FB_CUR_SETCMAP) {
u32 fg_idx = cursor->image.fg_color;
u32 bg_idx = cursor->image.bg_color;
struct fb_cmap cmap = info->cmap;
/* the X11 driver says one should use these color registers */
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(39),
cmap.red[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(40),
cmap.green[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(41),
cmap.blue[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(42),
cmap.red[bg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(43),
cmap.green[bg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(44),
cmap.blue[bg_idx] >> 8 );
}
if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
u8 *bitmap = (u8 *)cursor->image.data;
u8 *mask = (u8 *)cursor->mask;
int i;
int pos = PM3RD_CursorPattern(0);
for (i = 0; i < cursor->image.height; i++) {
int j = (cursor->image.width + 7) >> 3;
int k = 8 - j;
for (; j > 0; j--) {
u8 data = *bitmap ^ *mask;
if (cursor->rop == ROP_COPY)
data = *mask & *bitmap;
/* Upper 4 bits of bitmap data */
PM3_WRITE_DAC_REG(par, pos++,
cursor_bits_lookup[data >> 4] |
(cursor_bits_lookup[*mask >> 4] << 1));
/* Lower 4 bits of bitmap */
PM3_WRITE_DAC_REG(par, pos++,
cursor_bits_lookup[data & 0xf] |
(cursor_bits_lookup[*mask & 0xf] << 1));
bitmap++;
mask++;
}
for (; k > 0; k--) {
PM3_WRITE_DAC_REG(par, pos++, 0);
PM3_WRITE_DAC_REG(par, pos++, 0);
}
}
while (pos < PM3RD_CursorPattern(1024))
PM3_WRITE_DAC_REG(par, pos++, 0);
}
return 0;
}
/* write the mode to registers */
static void pm3fb_write_mode(struct fb_info *info)
{
......@@ -1103,6 +1215,7 @@ static struct fb_ops pm3fb_ops = {
.fb_imageblit = pm3fb_imageblit,
.fb_blank = pm3fb_blank,
.fb_sync = pm3fb_sync,
.fb_cursor = pm3fb_cursor,
};
/* ------------------------------------------------------------------------- */
......@@ -1418,6 +1531,8 @@ static int __init pm3fb_setup(char *options)
continue;
else if (!strncmp(this_opt, "noaccel", 7))
noaccel = 1;
else if (!strncmp(this_opt, "hwcursor=", 9))
hwcursor = simple_strtoul(this_opt + 9, NULL, 0);
#ifdef CONFIG_MTRR
else if (!strncmp(this_opt, "nomtrr", 6))
nomtrr = 1;
......@@ -1457,6 +1572,9 @@ module_init(pm3fb_init);
module_param(noaccel, bool, 0);
MODULE_PARM_DESC(noaccel, "Disable acceleration");
module_param(hwcursor, int, 0644);
MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
"(1=enable, 0=disable, default=1)");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册