提交 1c30cc19 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k_hw: fix dma descriptor rx error bit parsing

An Rx DMA descriptor can have multiple error bits set, and some error
bits (e.g. MIC failure) are filtered by the driver based on other criteria.
Remove the 'else' in various error bit checks so that all error information
is properly passed to the driver.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 1e1f4ad2
......@@ -613,9 +613,9 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
* possibly be reviewing the last subframe. AR_CRCErr
* is the CRC of the actual data.
*/
if (rxsp->status11 & AR_CRCErr) {
if (rxsp->status11 & AR_CRCErr)
rxs->rs_status |= ATH9K_RXERR_CRC;
} else if (rxsp->status11 & AR_PHYErr) {
if (rxsp->status11 & AR_PHYErr) {
phyerr = MS(rxsp->status11, AR_PHYErrCode);
/*
* If we reach a point here where AR_PostDelimCRCErr is
......@@ -638,11 +638,12 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
rxs->rs_phyerr = phyerr;
}
} else if (rxsp->status11 & AR_DecryptCRCErr) {
}
if (rxsp->status11 & AR_DecryptCRCErr)
rxs->rs_status |= ATH9K_RXERR_DECRYPT;
} else if (rxsp->status11 & AR_MichaelErr) {
if (rxsp->status11 & AR_MichaelErr)
rxs->rs_status |= ATH9K_RXERR_MIC;
} else if (rxsp->status11 & AR_KeyMiss)
if (rxsp->status11 & AR_KeyMiss)
rxs->rs_status |= ATH9K_RXERR_DECRYPT;
}
......
......@@ -692,15 +692,16 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
if (ads.ds_rxstatus8 & AR_CRCErr)
rs->rs_status |= ATH9K_RXERR_CRC;
else if (ads.ds_rxstatus8 & AR_PHYErr) {
if (ads.ds_rxstatus8 & AR_PHYErr) {
rs->rs_status |= ATH9K_RXERR_PHY;
phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
rs->rs_phyerr = phyerr;
} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
}
if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
else if (ads.ds_rxstatus8 & AR_MichaelErr)
if (ads.ds_rxstatus8 & AR_MichaelErr)
rs->rs_status |= ATH9K_RXERR_MIC;
else if (ads.ds_rxstatus8 & AR_KeyMiss)
if (ads.ds_rxstatus8 & AR_KeyMiss)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册