V4L/DVB (7638): CodingStyle fixes for au8522 and au0828

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/au8522.c

@@ -43,8 +43,12 @@ struct au8522_state {
 
 };
 
-static int debug = 0;
-#define dprintk	if (debug) printk
+static int debug;
+
+#define dprintk(arg...) do {		\
+	if (debug) 			\
+		 printk(##arg); }	\
+	} while (0)
 
 /* 16 bit registers, 8 bit values */
 static int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
@@ -284,7 +288,8 @@ static struct mse2snr_tab qam256_mse2snr_tab[] = {
 	{ 256, 280 },
 };
 
-static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, u16 *snr)
+static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
+				 u16 *snr)
 {
 	int i, ret = -EINVAL;
 	dprintk("%s()\n", __func__);
@@ -427,7 +432,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 
 	dprintk("%s(0x%08x)\n", __func__, m);
 
-	switch(m) {
+	switch (m) {
 	case VSB_8:
 		dprintk("%s() VSB_8\n", __func__);
 		for (i = 0; i < ARRAY_SIZE(VSB_mod_tab); i++)
@@ -469,9 +474,11 @@ static int au8522_set_frontend(struct dvb_frontend *fe,
 	msleep(100);
 
 	if (fe->ops.tuner_ops.set_params) {
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
 		fe->ops.tuner_ops.set_params(fe, p);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
 	return 0;
@@ -515,7 +522,7 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
 			*status |= FE_HAS_LOCK | FE_HAS_SYNC;
 	}
 
-	switch(state->config->status_mode) {
+	switch (state->config->status_mode) {
 	case AU8522_DEMODLOCKING:
 		dprintk("%s() DEMODLOCKING\n", __func__);
 		if (*status & FE_HAS_VITERBI)
@@ -651,6 +658,7 @@ struct dvb_frontend *au8522_attach(const struct au8522_config *config,
 	kfree(state);
 	return NULL;
 }
+EXPORT_SYMBOL(au8522_attach);
 
 static struct dvb_frontend_ops au8522_ops = {
 
@@ -682,10 +690,3 @@ MODULE_PARM_DESC(debug, "Enable verbose debug messages");
 MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver");
 MODULE_AUTHOR("Steven Toth");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(au8522_attach);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- */

drivers/media/dvb/frontends/au8522.h

@@ -24,8 +24,7 @@
 
 #include <linux/dvb/frontend.h>
 
-struct au8522_config
-{
+struct au8522_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
 
@@ -35,7 +34,8 @@ struct au8522_config
 	u8 status_mode;
 };
 
-#if defined(CONFIG_DVB_AU8522) || (defined(CONFIG_DVB_AU8522_MODULE) && defined(MODULE))
+#if defined(CONFIG_DVB_AU8522) || 				\
+	    (defined(CONFIG_DVB_AU8522_MODULE) && defined(MODULE))
 extern struct dvb_frontend *au8522_attach(const struct au8522_config *config,
 					  struct i2c_adapter *i2c);
 #else

drivers/media/video/au0828/au0828-cards.c

@@ -47,7 +47,7 @@ int au0828_tuner_callback(void *priv, int command, int arg)
 
 	dprintk(1, "%s()\n", __func__);
 
-	switch(dev->board) {
+	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_DVICO_FUSIONHDTV7:
@@ -59,8 +59,7 @@ int au0828_tuner_callback(void *priv, int command, int arg)
 			au0828_set(dev, REG_001, 2);
 			mdelay(50);
 			return 0;
-		}
-		else {
+		} else {
 			printk(KERN_ERR
 				"%s(): Unknown command.\n", __func__);
 			return -EINVAL;
@@ -103,7 +102,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 		tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
 	}
 
-	switch(dev->board) {
+	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 		if (dev->i2c_rc == 0)
@@ -121,7 +120,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 {
 	dprintk(1, "%s()\n", __func__);
 
-	switch(dev->board) {
+	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 		/* GPIO's

drivers/media/video/au0828/au0828-core.c

@@ -32,15 +32,15 @@
  * 4 = I2C related
  * 8 = Bridge related
  */
-unsigned int debug = 0;
+unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
-unsigned int usb_debug = 0;
+unsigned int usb_debug;
 module_param(usb_debug, int, 0644);
 MODULE_PARM_DESC(usb_debug, "enable usb debug messages");
 
-unsigned int bridge_debug = 0;
+unsigned int bridge_debug;
 module_param(bridge_debug, int, 0644);
 MODULE_PARM_DESC(bridge_debug, "enable bridge debug messages");
 
@@ -66,16 +66,17 @@ u32 au0828_readreg(struct au0828_dev *dev, u16 reg)
 u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val)
 {
 	dprintk(8, "%s(0x%x, 0x%x)\n", __func__, reg, val);
-	return send_control_msg(dev, CMD_REQUEST_OUT, val, reg, dev->ctrlmsg, 0);
+	return send_control_msg(dev, CMD_REQUEST_OUT, val, reg,
+				dev->ctrlmsg, 0);
 }
 
 static void cmd_msg_dump(struct au0828_dev *dev)
 {
 	int i;
 
-	for (i = 0;i < sizeof(dev->ctrlmsg); i+=16)
-		dprintk(2,"%s() %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x "
-			"%02x %02x %02x %02x %02x %02x\n",
+	for (i = 0; i < sizeof(dev->ctrlmsg); i += 16)
+		dprintk(2, "%s() %02x %02x %02x %02x %02x %02x %02x %02x "
+				"%02x %02x %02x %02x %02x %02x %02x %02x\n",
 			__func__,
 			dev->ctrlmsg[i+0], dev->ctrlmsg[i+1],
 			dev->ctrlmsg[i+2], dev->ctrlmsg[i+3],
@@ -136,8 +137,7 @@ static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
 		if (status < 0) {
 			printk(KERN_ERR "%s() Failed receiving control message, error %d.\n",
 				__func__, status);
-		}
-		else
+		} else
 			cmd_msg_dump(dev);
 	}
 	mutex_unlock(&dev->mutex);
@@ -166,7 +166,7 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
 
 }
 
-static int au0828_usb_probe (struct usb_interface *interface,
+static int au0828_usb_probe(struct usb_interface *interface,
 	const struct usb_device_id *id)
 {
 	int ifnum;

drivers/media/video/au0828/au0828-dvb.c

@@ -111,9 +111,8 @@ static int start_urb_transfer(struct au0828_dev *dev)
 	for (i = 0; i < URB_COUNT; i++) {
 
 		dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
-		if (!dev->urbs[i]) {
+		if (!dev->urbs[i])
 			goto err;
-		}
 
 		purb = dev->urbs[i];
 

drivers/media/video/au0828/au0828-i2c.c

@@ -23,17 +23,17 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include "au0828.h"
 
 #include <media/v4l2-common.h>
 
-unsigned int i2c_debug = 0;
+unsigned int i2c_debug;
 module_param(i2c_debug, int, 0444);
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
-unsigned int i2c_scan = 0;
+unsigned int i2c_scan;
 module_param(i2c_scan, int, 0444);
 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
 
@@ -323,9 +323,9 @@ static struct i2c_client au0828_i2c_client_template = {
 };
 
 static char *i2c_devs[128] = {
-	[ 0x8e >> 1 ] = "au8522",
-	[ 0xa0 >> 1 ] = "eeprom",
-	[ 0xc2 >> 1 ] = "tuner/xc5000",
+	[0x8e >> 1] = "au8522",
+	[0xa0 >> 1] = "eeprom",
+	[0xc2 >> 1] = "tuner/xc5000",
 };
 
 static void do_i2c_scan(char *name, struct i2c_client *c)
@@ -338,7 +338,7 @@ static void do_i2c_scan(char *name, struct i2c_client *c)
 		rc = i2c_master_recv(c, &buf, 0);
 		if (rc < 0)
 			continue;
-		printk("%s: i2c scan: found device @ 0x%x  [%s]\n",
+		printk(KERN_INFO "%s: i2c scan: found device @ 0x%x  [%s]\n",
 		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
 	}
 }
@@ -368,11 +368,11 @@ int au0828_i2c_register(struct au0828_dev *dev)
 	dev->i2c_client.adapter = &dev->i2c_adap;
 
 	if (0 == dev->i2c_rc) {
-		printk("%s: i2c bus registered\n", DRIVER_NAME);
+		printk(KERN_INFO "%s: i2c bus registered\n", DRIVER_NAME);
 		if (i2c_scan)
 			do_i2c_scan(DRIVER_NAME, &dev->i2c_client);
 	} else
-		printk("%s: i2c bus register FAILED\n", DRIVER_NAME);
+		printk(KERN_INFO "%s: i2c bus register FAILED\n", DRIVER_NAME);
 
 	return dev->i2c_rc;
 }

drivers/media/video/au0828/au0828.h

@@ -83,13 +83,14 @@ struct au0828_buff {
 };
 
 /* ----------------------------------------------------------- */
-#define au0828_read(dev,reg) au0828_readreg(dev,reg)
-#define au0828_write(dev,reg,value) au0828_writereg(dev,reg,value)
-#define au0828_andor(dev,reg,mask,value) \
- au0828_writereg(dev,reg,(au0828_readreg(dev,reg)&~(mask))|((value)&(mask)))
-
-#define au0828_set(dev,reg,bit) au0828_andor(dev,(reg),(bit),(bit))
-#define au0828_clear(dev,reg,bit) au0828_andor(dev,(reg),(bit),0)
+#define au0828_read(dev, reg) au0828_readreg(dev, reg)
+#define au0828_write(dev, reg, value) au0828_writereg(dev, reg, value)
+#define au0828_andor(dev, reg, mask, value) 				\
+	 au0828_writereg(dev, reg, 					\
+	(au0828_readreg(dev, reg) & ~(mask)) | ((value) & (mask)))
+
+#define au0828_set(dev, reg, bit) au0828_andor(dev, (reg), (bit), (bit))
+#define au0828_clear(dev, reg, bit) au0828_andor(dev, (reg), (bit), 0)
 
 /* ----------------------------------------------------------- */
 /* au0828-core.c */