提交 13c40c54 编写于 作者: A Alexander Simon 提交者: John W. Linville

mac80211: Add HT operation modes for IBSS

The HT mode is set by iw (previous patchsets).
The interface is set into the specified HT mode.
HT mode and capabilities are announced in beacons.

If we add a station that uses HT also, the fastest matching HT mode will
be used for transmission. That means if we are using HT40+ and we add a station
running on HT40-, we would transfer at HT20.

If we join an IBSS with HT40, but the secondary channel is not
available, we will fall back into HT20 as well.

Allow frame aggregation to start in IBSS mode.
Signed-off-by: NAlexander Simon <an.alexsimon@googlemail.com>
[siwu@hrz.tu-chemnitz.de: Updates]
* remove implicit channel_type enum assumptions
* use rate_control_rate_init() if channel type changed
* remove channel flags check
* activate HT IBSS feature support
* slightly reword commit message
* rebase on wireless-testing
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 ff3cc5f4
......@@ -185,6 +185,8 @@ static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *d
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
......
......@@ -83,6 +83,8 @@ static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
......@@ -419,7 +421,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP)
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
return -EINVAL;
if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
......
......@@ -282,6 +282,8 @@ void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
......
......@@ -77,6 +77,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *bss;
u32 bss_change;
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
enum nl80211_channel_type channel_type;
lockdep_assert_held(&ifibss->mtx);
......@@ -105,8 +106,16 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
local->oper_channel = chan;
WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
channel_type = ifibss->channel_type;
if (channel_type > NL80211_CHAN_HT20 &&
!cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
channel_type = NL80211_CHAN_HT20;
if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
/* can only fail due to HT40+/- mismatch */
channel_type = NL80211_CHAN_HT20;
WARN_ON(!ieee80211_set_channel_type(local, sdata,
NL80211_CHAN_HT20));
}
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sband = local->hw.wiphy->bands[chan->band];
......@@ -172,6 +181,19 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memcpy(skb_put(skb, ifibss->ie_len),
ifibss->ie, ifibss->ie_len);
/* add HT capability and information IEs */
if (channel_type && sband->ht_cap.ht_supported) {
pos = skb_put(skb, 4 +
sizeof(struct ieee80211_ht_cap) +
sizeof(struct ieee80211_ht_info));
pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
sband->ht_cap.cap);
pos = ieee80211_ie_build_ht_info(pos,
&sband->ht_cap,
chan,
channel_type);
}
if (local->hw.queues >= 4) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
......@@ -195,6 +217,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
bss_change |= BSS_CHANGED_BEACON;
bss_change |= BSS_CHANGED_BEACON_ENABLED;
bss_change |= BSS_CHANGED_BASIC_RATES;
bss_change |= BSS_CHANGED_HT;
bss_change |= BSS_CHANGED_IBSS;
sdata->vif.bss_conf.ibss_joined = true;
ieee80211_bss_info_change_notify(sdata, bss_change);
......@@ -268,6 +291,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
u64 beacon_timestamp, rx_timestamp;
u32 supp_rates = 0;
enum ieee80211_band band = rx_status->band;
struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
bool rates_updated = false;
if (elems->ds_params && elems->ds_params_len == 1)
freq = ieee80211_channel_to_frequency(elems->ds_params[0],
......@@ -307,7 +332,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
prev_rates,
sta->sta.supp_rates[band]);
#endif
rate_control_rate_init(sta);
rates_updated = true;
}
} else
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
......@@ -318,6 +343,39 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
if (sta && elems->wmm_info)
set_sta_flag(sta, WLAN_STA_WME);
if (sta && elems->ht_info_elem && elems->ht_cap_elem &&
sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) {
/* we both use HT */
struct ieee80211_sta_ht_cap sta_ht_cap_new;
enum nl80211_channel_type channel_type =
ieee80211_ht_info_to_channel_type(
elems->ht_info_elem);
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
elems->ht_cap_elem,
&sta_ht_cap_new);
/*
* fall back to HT20 if we don't use or use
* the other extension channel
*/
if ((channel_type == NL80211_CHAN_HT40MINUS ||
channel_type == NL80211_CHAN_HT40PLUS) &&
channel_type != sdata->u.ibss.channel_type)
sta_ht_cap_new.cap &=
~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new,
sizeof(sta_ht_cap_new))) {
memcpy(&sta->sta.ht_cap, &sta_ht_cap_new,
sizeof(sta_ht_cap_new));
rates_updated = true;
}
}
if (sta && rates_updated)
rate_control_rate_init(sta);
rcu_read_unlock();
}
......@@ -899,10 +957,15 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
u32 changed = 0;
skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
36 /* bitrates */ +
34 /* SSID */ +
3 /* DS params */ +
4 /* IBSS params */ +
sizeof(struct ieee80211_hdr_3addr) +
12 /* struct ieee80211_mgmt.u.beacon */ +
2 + IEEE80211_MAX_SSID_LEN /* max SSID */ +
2 + 8 /* max Supported Rates */ +
3 /* max DS params */ +
4 /* IBSS params */ +
2 + (IEEE80211_MAX_SUPP_RATES - 8) +
2 + sizeof(struct ieee80211_ht_cap) +
2 + sizeof(struct ieee80211_ht_info) +
params->ie_len);
if (!skb)
return -ENOMEM;
......@@ -923,13 +986,15 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->u.ibss.channel = params->channel;
sdata->u.ibss.channel_type = params->channel_type;
sdata->u.ibss.fixed_channel = params->channel_fixed;
/* fix ourselves to that channel now already */
if (params->channel_fixed) {
sdata->local->oper_channel = params->channel;
WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
NL80211_CHAN_NO_HT));
if (!ieee80211_set_channel_type(sdata->local, sdata,
params->channel_type))
return -EINVAL;
}
if (params->ie) {
......
......@@ -474,6 +474,7 @@ struct ieee80211_if_ibss {
u8 ssid_len, ie_len;
u8 *ie;
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
unsigned long ibss_join_req;
/* probe response/beacon for IBSS */
......
......@@ -570,7 +570,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
WIPHY_FLAG_OFFCHAN_TX |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
wiphy->features = NL80211_FEATURE_SK_TX_STATUS;
wiphy->features = NL80211_FEATURE_SK_TX_STATUS |
NL80211_FEATURE_HT_IBSS;
if (!ops->set_key)
wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
......
......@@ -2237,7 +2237,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP)
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
/* verify action_code is present */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册