提交 0ca1e290 编写于 作者: S Shawn Guo

net/fec: gasket needs to be enabled for some i.mx

On the recent i.mx (mx25/50/53), there is a gasket inside fec
controller which needs to be enabled no matter phy works in MII
or RMII mode.

The current code enables the gasket only when phy interface is RMII.
It's broken when the driver works with a MII phy.  The patch uses
platform_device_id to distinguish the SoCs that have the gasket and
enables it on these SoCs for both MII and RMII mode.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reported-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
上级 22698aa2
......@@ -296,7 +296,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
......
......@@ -663,7 +663,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk)
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
......
......@@ -461,7 +461,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
/* i.mx35 has the i.mx27 type fec */
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
......
......@@ -1427,7 +1427,8 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
/* i.mx51 has the i.mx27 type fec */
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
......@@ -1478,7 +1479,8 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
/* i.mx53 has the i.mx25 type fec */
_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
......
......@@ -11,40 +11,45 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
#define imx_fec_data_entry_single(soc) \
#define imx_fec_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _FEC_BASE_ADDR, \
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
imx_fec_data_entry_single(MX25);
imx_fec_data_entry_single(MX25, "imx25-fec");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27);
imx_fec_data_entry_single(MX27, "imx27-fec");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX35
/* i.mx35 has the i.mx27 type fec */
const struct imx_fec_data imx35_fec_data __initconst =
imx_fec_data_entry_single(MX35);
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
#ifdef CONFIG_SOC_IMX50
/* i.mx50 has the i.mx25 type fec */
const struct imx_fec_data imx50_fec_data __initconst =
imx_fec_data_entry_single(MX50);
imx_fec_data_entry_single(MX50, "imx25-fec");
#endif
#ifdef CONFIG_SOC_IMX51
/* i.mx51 has the i.mx27 type fec */
const struct imx_fec_data imx51_fec_data __initconst =
imx_fec_data_entry_single(MX51);
imx_fec_data_entry_single(MX51, "imx27-fec");
#endif
#ifdef CONFIG_SOC_IMX53
/* i.mx53 has the i.mx25 type fec */
const struct imx_fec_data imx53_fec_data __initconst =
imx_fec_data_entry_single(MX53);
imx_fec_data_entry_single(MX53, "imx25-fec");
#endif
struct platform_device *__init imx_add_fec(
......@@ -63,7 +68,7 @@ struct platform_device *__init imx_add_fec(
},
};
return imx_add_platform_device_dmamask("fec", 0,
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
......@@ -30,6 +30,7 @@ static inline struct platform_device *imx_add_platform_device(
#include <linux/fec.h>
struct imx_fec_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
......
......@@ -66,17 +66,28 @@
#define FEC_QUIRK_ENET_MAC (1 << 0)
/* Controller needs driver to swap frame */
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
/* Controller uses gasket */
#define FEC_QUIRK_USE_GASKET (1 << 2)
static struct platform_device_id fec_devtype[] = {
{
/* keep it for coldfire */
.name = DRIVER_NAME,
.driver_data = 0,
}, {
.name = "imx25-fec",
.driver_data = FEC_QUIRK_USE_GASKET,
}, {
.name = "imx27-fec",
.driver_data = 0,
}, {
.name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
},
{ }
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, fec_devtype);
static unsigned char macaddr[ETH_ALEN];
module_param_array(macaddr, byte, NULL, 0);
......@@ -427,7 +438,7 @@ fec_restart(struct net_device *ndev, int duplex)
} else {
#ifdef FEC_MIIGSK_ENR
if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
......@@ -436,8 +447,11 @@ fec_restart(struct net_device *ndev, int duplex)
/*
* configure the gasket:
* RMII, 50 MHz, no loopback, no echo
* MII, 25 MHz, no loopback, no echo
*/
writel(1, fep->hwp + FEC_MIIGSK_CFGR);
writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ?
1 : 0, fep->hwp + FEC_MIIGSK_CFGR);
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册