rtl8192ce: Add new driver

Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/Kconfig

@@ -279,6 +279,7 @@ source "drivers/net/wireless/libertas/Kconfig"
 source "drivers/net/wireless/orinoco/Kconfig"
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/rtlwifi/Kconfig"
 source "drivers/net/wireless/wl1251/Kconfig"
 source "drivers/net/wireless/wl12xx/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"

drivers/net/wireless/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_B43LEGACY)		+= b43legacy/
 obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
 obj-$(CONFIG_RTL8180)		+= rtl818x/
 obj-$(CONFIG_RTL8187)		+= rtl818x/
+obj-$(CONFIG_RTL8192CE)		+= rtlwifi/
 
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o

drivers/net/wireless/rtlwifi/Kconfig

+config RTL8192CE
+	tristate "Realtek RTL8192CE/RTL8188SE Wireless Network Adapter"
+	depends on MAC80211 && EXPERIMENTAL
+	select FW_LOADER
+	select RTLWIFI
+	---help---
+	This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
+	wireless network adapters.
+
+	If you choose to build it as a module, it will be calledrtl8192ce.
+
+config RTLWIFI
+	tristate
+	depends on RTL8192CE
+	default m

drivers/net/wireless/rtlwifi/Makefile

+obj-$(CONFIG_RTLWIFI) 		+= rtlwifi.o
+rtlwifi-objs	:=		\
+		base.o		\
+		cam.o		\
+		core.o		\
+		debug.o		\
+		efuse.o		\
+		pci.o		\
+		ps.o		\
+		rc.o		\
+		regd.o
+
+obj-$(CONFIG_RTL8192CE)		+= rtl8192ce/

drivers/net/wireless/rtlwifi/base.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_BASE_H__
+#define __RTL_BASE_H__
+
+#define RTL_DUMMY_OFFSET	0
+#define RTL_DUMMY_UNIT		8
+#define RTL_TX_DUMMY_SIZE	(RTL_DUMMY_OFFSET * RTL_DUMMY_UNIT)
+#define RTL_TX_DESC_SIZE	32
+#define RTL_TX_HEADER_SIZE	(RTL_TX_DESC_SIZE + RTL_TX_DUMMY_SIZE)
+
+#define HT_AMSDU_SIZE_4K	3839
+#define HT_AMSDU_SIZE_8K	7935
+
+#define MAX_BIT_RATE_40MHZ_MCS15	300	/* Mbps */
+#define MAX_BIT_RATE_40MHZ_MCS7		150	/* Mbps */
+
+#define RTL_RATE_COUNT_LEGACY		12
+#define RTL_CHANNEL_COUNT		14
+
+#define FRAME_OFFSET_FRAME_CONTROL	0
+#define FRAME_OFFSET_DURATION		2
+#define FRAME_OFFSET_ADDRESS1		4
+#define FRAME_OFFSET_ADDRESS2		10
+#define FRAME_OFFSET_ADDRESS3		16
+#define FRAME_OFFSET_SEQUENCE		22
+#define FRAME_OFFSET_ADDRESS4		24
+
+#define SET_80211_HDR_FRAME_CONTROL(_hdr, _val)		\
+	WRITEEF2BYTE(_hdr, _val)
+#define SET_80211_HDR_TYPE_AND_SUBTYPE(_hdr, _val)	\
+	WRITEEF1BYTE(_hdr, _val)
+#define SET_80211_HDR_PWR_MGNT(_hdr, _val)		\
+	SET_BITS_TO_LE_2BYTE(_hdr, 12, 1, _val)
+#define SET_80211_HDR_TO_DS(_hdr, _val)			\
+	SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
+
+#define SET_80211_PS_POLL_AID(_hdr, _val)		\
+	WRITEEF2BYTE(((u8 *)(_hdr)) + 2, _val)
+#define SET_80211_PS_POLL_BSSID(_hdr, _val)		\
+	CP_MACADDR(((u8 *)(_hdr)) + 4, (u8 *)(_val))
+#define SET_80211_PS_POLL_TA(_hdr, _val)		\
+	CP_MACADDR(((u8 *)(_hdr)) + 10, (u8 *)(_val))
+
+#define SET_80211_HDR_DURATION(_hdr, _val)	\
+	WRITEEF2BYTE((u8 *)(_hdr)+FRAME_OFFSET_DURATION, _val)
+#define SET_80211_HDR_ADDRESS1(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS1, (u8*)(_val))
+#define SET_80211_HDR_ADDRESS2(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS2, (u8 *)(_val))
+#define SET_80211_HDR_ADDRESS3(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS3, (u8 *)(_val))
+#define SET_80211_HDR_FRAGMENT_SEQUENCE(_hdr, _val)  \
+	WRITEEF2BYTE((u8 *)(_hdr)+FRAME_OFFSET_SEQUENCE, _val)
+
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_LOW(__phdr, __val)	\
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 24, __val)
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_HIGH(__phdr, __val) \
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 28, __val)
+#define SET_BEACON_PROBE_RSP_BEACON_INTERVAL(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 32, __val)
+#define GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr)	\
+	READEF2BYTE(((u8 *)(__phdr)) + 34)
+#define SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 34, __val)
+#define MASK_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, \
+	(GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr) & (~(__val))))
+
+int rtl_init_core(struct ieee80211_hw *hw);
+void rtl_deinit_core(struct ieee80211_hw *hw);
+void rtl_init_rx_config(struct ieee80211_hw *hw);
+void rtl_init_rfkill(struct ieee80211_hw *hw);
+void rtl_deinit_rfkill(struct ieee80211_hw *hw);
+
+void rtl_watch_dog_timer_callback(unsigned long data);
+void rtl_deinit_deferred_work(struct ieee80211_hw *hw);
+
+bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
+bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
+u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
+
+void rtl_watch_dog_timer_callback(unsigned long data);
+int rtl_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra,
+		     u16 tid, u16 *ssn);
+int rtl_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid);
+void rtl_watchdog_wq_callback(void *data);
+
+void rtl_get_tcb_desc(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_info *info,
+		      struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc);
+
+extern struct attribute_group rtl_attribute_group;
+#endif

drivers/net/wireless/rtlwifi/cam.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "cam.h"
+
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->sec.use_defaultkey = false;
+	rtlpriv->sec.pairwise_enc_algorithm = NO_ENCRYPTION;
+	rtlpriv->sec.group_enc_algorithm = NO_ENCRYPTION;
+	memset(rtlpriv->sec.key_buf, 0, KEY_BUF_SIZE * MAX_KEY_LEN);
+	memset(rtlpriv->sec.key_len, 0, KEY_BUF_SIZE);
+	rtlpriv->sec.pairwise_key = NULL;
+}
+
+static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
+			   u8 *mac_addr, u8 *key_cont_128, u16 us_config)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 target_command;
+	u32 target_content = 0;
+	u8 entry_i;
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("key_cont_128:\n %x:%x:%x:%x:%x:%x\n",
+		  key_cont_128[0], key_cont_128[1],
+		  key_cont_128[2], key_cont_128[3],
+		  key_cont_128[4], key_cont_128[5]));
+
+	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+		target_command = entry_i + CAM_CONTENT_COUNT * entry_no;
+		target_command = target_command | BIT(31) | BIT(16);
+
+		if (entry_i == 0) {
+			target_content = (u32) (*(mac_addr + 0)) << 16 |
+			    (u32) (*(mac_addr + 1)) << 24 | (u32) us_config;
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): "
+				  "WRITE %x: %x\n",
+				  rtlpriv->cfg->maps[WCAMI], target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("The Key ID is %d\n", entry_no));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): "
+				  "WRITE %x: %x\n",
+				  rtlpriv->cfg->maps[RWCAM], target_command));
+
+		} else if (entry_i == 1) {
+
+			target_content = (u32) (*(mac_addr + 5)) << 24 |
+			    (u32) (*(mac_addr + 4)) << 16 |
+			    (u32) (*(mac_addr + 3)) << 8 |
+			    (u32) (*(mac_addr + 2));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A4: %x\n",
+				  target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A0: %x\n",
+				  target_command));
+
+		} else {
+
+			target_content =
+			    (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 3)) <<
+			    24 | (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 2))
+			    << 16 |
+			    (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 1)) << 8
+			    | (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 0));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+			udelay(100);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A4: %x\n",
+				  target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A0: %x\n",
+				  target_command));
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("after set key, usconfig:%x\n", us_config));
+}
+
+u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			 u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			 u32 ul_default_key, u8 *key_content)
+{
+	u32 us_config;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, "
+		  "ulUseDK=%x MacAddr" MAC_FMT "\n",
+		  ul_entry_idx, ul_key_id, ul_enc_alg,
+		  ul_default_key, MAC_ARG(mac_addr)));
+
+	if (ul_key_id == TOTAL_CAM_ENTRY) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("<=== ulKeyId exceed!\n"));
+		return 0;
+	}
+
+	if (ul_default_key == 1) {
+		us_config = CFG_VALID | ((u16) (ul_enc_alg) << 2);
+	} else {
+		us_config = CFG_VALID | ((ul_enc_alg) << 2) | ul_key_id;
+	}
+
+	rtl_cam_program_entry(hw, ul_entry_idx, mac_addr,
+			      (u8 *) key_content, us_config);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("<===\n"));
+
+	return 1;
+
+}
+EXPORT_SYMBOL(rtl_cam_add_one_entry);
+
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw,
+			     u8 *mac_addr, u32 ul_key_id)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("key_idx:%d\n", ul_key_id));
+
+	ul_command = ul_key_id * CAM_CONTENT_COUNT;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], 0);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_delete_one_entry(): WRITE A4: %x\n", 0));
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_delete_one_entry(): WRITE A0: %x\n", ul_command));
+
+	return 0;
+
+}
+EXPORT_SYMBOL(rtl_cam_delete_one_entry);
+
+void rtl_cam_reset_all_entry(struct ieee80211_hw *hw)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	ul_command = BIT(31) | BIT(30);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+}
+EXPORT_SYMBOL(rtl_cam_reset_all_entry);
+
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	ul_content = (uc_index & 3) | ((u16) (ul_enc_algo) << 2);
+
+	ul_content |= BIT(15);
+	ul_command = CAM_CONTENT_COUNT * uc_index;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_mark_invalid(): WRITE A4: %x\n", ul_content));
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_mark_invalid(): WRITE A0: %x\n", ul_command));
+}
+EXPORT_SYMBOL(rtl_cam_mark_invalid);
+
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	u8 entry_i;
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+
+		if (entry_i == 0) {
+			ul_content =
+			    (uc_index & 0x03) | ((u16) (ul_encalgo) << 2);
+			ul_content |= BIT(15);
+
+		} else {
+			ul_content = 0;
+		}
+
+		ul_command = CAM_CONTENT_COUNT * uc_index + entry_i;
+		ul_command = ul_command | BIT(31) | BIT(16);
+
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 ("rtl_cam_empty_entry(): WRITE A4: %x\n",
+			  ul_content));
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 ("rtl_cam_empty_entry(): WRITE A0: %x\n",
+			  ul_command));
+	}
+
+}
+EXPORT_SYMBOL(rtl_cam_empty_entry);

drivers/net/wireless/rtlwifi/cam.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_CAM_H_
+#define __RTL_CAM_H_
+
+#define TOTAL_CAM_ENTRY					32
+#define CAM_CONTENT_COUNT				8
+
+#define CFG_DEFAULT_KEY					BIT(5)
+#define CFG_VALID					BIT(15)
+
+#define PAIRWISE_KEYIDX					0
+#define CAM_PAIRWISE_KEY_POSITION		4
+
+#define	CAM_CONFIG_USEDK				1
+#define	CAM_CONFIG_NO_USEDK				0
+
+extern void rtl_cam_reset_all_entry(struct ieee80211_hw *hw);
+extern u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			u32 ul_default_key, u8 *key_content);
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			u32 ul_key_id);
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw);
+
+#endif

drivers/net/wireless/rtlwifi/core.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_CORE_H__
+#define __RTL_CORE_H__
+
+#define RTL_SUPPORTED_FILTERS		\
+	(FIF_PROMISC_IN_BSS | \
+	FIF_ALLMULTI | FIF_CONTROL | \
+	FIF_OTHER_BSS | \
+	FIF_FCSFAIL | \
+	FIF_BCN_PRBRESP_PROMISC)
+
+#define RTL_SUPPORTED_CTRL_FILTER	0xFF
+
+extern const struct ieee80211_ops rtl_ops;
+#endif

drivers/net/wireless/rtlwifi/debug.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#include "wifi.h"
+
+void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 i;
+
+	rtlpriv->dbg.global_debuglevel = DBG_EMERG;
+
+	rtlpriv->dbg.global_debugcomponents =
+	    COMP_ERR | COMP_FW | COMP_INIT | COMP_RECV | COMP_SEND |
+	    COMP_MLME | COMP_SCAN | COMP_INTR | COMP_LED | COMP_SEC |
+	    COMP_BEACON | COMP_RATE | COMP_RXDESC | COMP_DIG | COMP_TXAGC |
+	    COMP_POWER | COMP_POWER_TRACKING | COMP_BB_POWERSAVING | COMP_SWAS |
+	    COMP_RF | COMP_TURBO | COMP_RATR | COMP_CMD |
+	    COMP_EFUSE | COMP_QOS | COMP_MAC80211 | COMP_REGD | COMP_CHAN;
+
+	for (i = 0; i < DBGP_TYPE_MAX; i++)
+		rtlpriv->dbg.dbgp_type[i] = 0;
+
+	/*Init Debug flag enable condition */
+}

drivers/net/wireless/rtlwifi/debug.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_DEBUG_H__
+#define __RTL_DEBUG_H__
+
+/*--------------------------------------------------------------
+			Debug level
+--------------------------------------------------------------*/
+/*
+ *Fatal bug.
+ *For example, Tx/Rx/IO locked up,
+ *memory access violation,
+ *resource allocation failed,
+ *unexpected HW behavior, HW BUG
+ *and so on.
+ */
+#define DBG_EMERG			0
+
+/*
+ *Abnormal, rare, or unexpeted cases.
+ *For example, Packet/IO Ctl canceled,
+ *device suprisely unremoved and so on.
+ */
+#define	DBG_WARNING			2
+
+/*
+ *Normal case driver developer should
+ *open, we can see link status like
+ *assoc/AddBA/DHCP/adapter start and
+ *so on basic and useful infromations.
+ */
+#define DBG_DMESG			3
+
+/*
+ *Normal case with useful information
+ *about current SW or HW state.
+ *For example, Tx/Rx descriptor to fill,
+ *Tx/Rx descriptor completed status,
+ *SW protocol state change, dynamic
+ *mechanism state change and so on.
+ */
+#define DBG_LOUD			4
+
+/*
+ *Normal case with detail execution
+ *flow or information.
+ */
+#define	DBG_TRACE			5
+
+/*--------------------------------------------------------------
+		Define the rt_trace components
+--------------------------------------------------------------*/
+#define COMP_ERR			BIT(0)
+#define COMP_FW				BIT(1)
+#define COMP_INIT			BIT(2)	/*For init/deinit */
+#define COMP_RECV			BIT(3)	/*For Rx. */
+#define COMP_SEND			BIT(4)	/*For Tx. */
+#define COMP_MLME			BIT(5)	/*For MLME. */
+#define COMP_SCAN			BIT(6)	/*For Scan. */
+#define COMP_INTR			BIT(7)	/*For interrupt Related. */
+#define COMP_LED			BIT(8)	/*For LED. */
+#define COMP_SEC			BIT(9)	/*For sec. */
+#define COMP_BEACON			BIT(10)	/*For beacon. */
+#define COMP_RATE			BIT(11)	/*For rate. */
+#define COMP_RXDESC			BIT(12)	/*For rx desc. */
+#define COMP_DIG			BIT(13)	/*For DIG */
+#define COMP_TXAGC			BIT(14)	/*For Tx power */
+#define COMP_HIPWR			BIT(15)	/*For High Power Mechanism */
+#define COMP_POWER			BIT(16)	/*For lps/ips/aspm. */
+#define COMP_POWER_TRACKING	BIT(17)	/*For TX POWER TRACKING */
+#define COMP_BB_POWERSAVING	BIT(18)
+#define COMP_SWAS			BIT(19)	/*For SW Antenna Switch */
+#define COMP_RF				BIT(20)	/*For RF. */
+#define COMP_TURBO			BIT(21)	/*For EDCA TURBO. */
+#define COMP_RATR			BIT(22)
+#define COMP_CMD			BIT(23)
+#define COMP_EFUSE			BIT(24)
+#define COMP_QOS			BIT(25)
+#define COMP_MAC80211		BIT(26)
+#define COMP_REGD			BIT(27)
+#define COMP_CHAN			BIT(28)
+
+/*--------------------------------------------------------------
+		Define the rt_print components
+--------------------------------------------------------------*/
+/* Define EEPROM and EFUSE  check module bit*/
+#define EEPROM_W			BIT(0)
+#define EFUSE_PG			BIT(1)
+#define EFUSE_READ_ALL		BIT(2)
+
+/* Define init check for module bit*/
+#define	INIT_EEPROM			BIT(0)
+#define	INIT_TxPower		BIT(1)
+#define	INIT_IQK			BIT(2)
+#define	INIT_RF				BIT(3)
+
+/* Define PHY-BB/RF/MAC check module bit */
+#define	PHY_BBR				BIT(0)
+#define	PHY_BBW				BIT(1)
+#define	PHY_RFR				BIT(2)
+#define	PHY_RFW				BIT(3)
+#define	PHY_MACR			BIT(4)
+#define	PHY_MACW			BIT(5)
+#define	PHY_ALLR			BIT(6)
+#define	PHY_ALLW			BIT(7)
+#define	PHY_TXPWR			BIT(8)
+#define	PHY_PWRDIFF			BIT(9)
+
+enum dbgp_flag_e {
+	FQOS = 0,
+	FTX = 1,
+	FRX = 2,
+	FSEC = 3,
+	FMGNT = 4,
+	FMLME = 5,
+	FRESOURCE = 6,
+	FBEACON = 7,
+	FISR = 8,
+	FPHY = 9,
+	FMP = 10,
+	FEEPROM = 11,
+	FPWR = 12,
+	FDM = 13,
+	FDBGCtrl = 14,
+	FC2H = 15,
+	FBT = 16,
+	FINIT = 17,
+	FIOCTL = 18,
+	DBGP_TYPE_MAX
+};
+
+#define RT_ASSERT(_exp, fmt)				\
+	do {						\
+		if (!(_exp)) {			\
+			printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \
+			__func__);			\
+			printk fmt;			\
+		} \
+	} while (0);
+
+#define RT_TRACE(rtlpriv, comp, level, fmt)\
+	do { \
+		if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
+			((level) <= rtlpriv->dbg.global_debuglevel))) {\
+			printk(KERN_DEBUG "%s:%s():<%lx-%x> ", KBUILD_MODNAME, \
+			__func__, in_interrupt(), in_atomic());	\
+			printk fmt;				\
+		} \
+	} while (0);
+
+#define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr)	\
+	do {						\
+		if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk printstr;		\
+		}					\
+	} while (0);
+
+#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
+		_hexdatalen) \
+	do {\
+		if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) &&\
+			(_level <= rtlpriv->dbg.global_debuglevel)))	{ \
+			int __i;					\
+			u8*	ptr = (u8 *)_hexdata;			\
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk("In process \"%s\" (pid %i):", current->comm,\
+					current->pid); \
+			printk(_titlestring);		\
+			for (__i = 0; __i < (int)_hexdatalen; __i++) {	\
+				printk("%02X%s", ptr[__i], (((__i + 1) % 4)\
+							== 0) ? "  " : " ");\
+				if (((__i + 1) % 16) == 0)		\
+					printk("\n");			\
+			}				\
+			printk(KERN_DEBUG "\n");			\
+		} \
+	} while (0);
+
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) \
+	((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2],\
+	((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5]
+
+void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
+#endif

drivers/net/wireless/rtlwifi/efuse.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_EFUSE_H_
+#define __RTL_EFUSE_H_
+
+#define EFUSE_REAL_CONTENT_LEN		512
+#define EFUSE_MAP_LEN			128
+#define EFUSE_MAX_SECTION		16
+#define EFUSE_MAX_WORD_UNIT		4
+
+#define EFUSE_INIT_MAP			0
+#define EFUSE_MODIFY_MAP		1
+
+#define PG_STATE_HEADER			0x01
+#define PG_STATE_WORD_0			0x02
+#define PG_STATE_WORD_1			0x04
+#define PG_STATE_WORD_2			0x08
+#define PG_STATE_WORD_3			0x10
+#define PG_STATE_DATA			0x20
+
+#define PG_SWBYTE_H			0x01
+#define PG_SWBYTE_L			0x02
+
+#define _POWERON_DELAY_
+#define _PRE_EXECUTE_READ_CMD_
+
+#define EFUSE_REPEAT_THRESHOLD_		3
+
+struct efuse_map {
+	u8 offset;
+	u8 word_start;
+	u8 byte_start;
+	u8 byte_cnts;
+};
+
+struct pgpkt_struct {
+	u8 offset;
+	u8 word_en;
+	u8 data[8];
+};
+
+enum efuse_data_item {
+	EFUSE_CHIP_ID = 0,
+	EFUSE_LDO_SETTING,
+	EFUSE_CLK_SETTING,
+	EFUSE_SDIO_SETTING,
+	EFUSE_CCCR,
+	EFUSE_SDIO_MODE,
+	EFUSE_OCR,
+	EFUSE_F0CIS,
+	EFUSE_F1CIS,
+	EFUSE_MAC_ADDR,
+	EFUSE_EEPROM_VER,
+	EFUSE_CHAN_PLAN,
+	EFUSE_TXPW_TAB
+};
+
+enum {
+	VOLTAGE_V25 = 0x03,
+	LDOE25_SHIFT = 28,
+};
+
+struct efuse_priv {
+	u8 id[2];
+	u8 ldo_setting[2];
+	u8 clk_setting[2];
+	u8 cccr;
+	u8 sdio_mode;
+	u8 ocr[3];
+	u8 cis0[17];
+	u8 cis1[48];
+	u8 mac_addr[6];
+	u8 eeprom_verno;
+	u8 channel_plan;
+	u8 tx_power_b[14];
+	u8 tx_power_g[14];
+};
+
+extern void efuse_initialize(struct ieee80211_hw *hw);
+extern u8 efuse_read_1byte(struct ieee80211_hw *hw, u16 address);
+extern void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value);
+extern void read_efuse(struct ieee80211_hw *hw, u16 _offset,
+		       u16 _size_byte, u8 *pbuf);
+extern void efuse_shadow_read(struct ieee80211_hw *hw, u8 type,
+			      u16 offset, u32 *value);
+extern void efuse_shadow_write(struct ieee80211_hw *hw, u8 type,
+			       u16 offset, u32 value);
+extern bool efuse_shadow_update(struct ieee80211_hw *hw);
+extern bool efuse_shadow_update_chk(struct ieee80211_hw *hw);
+extern void rtl_efuse_shadow_map_update(struct ieee80211_hw *hw);
+extern void efuse_force_write_vendor_Id(struct ieee80211_hw *hw);
+extern void efuse_re_pg_section(struct ieee80211_hw *hw, u8 section_idx);
+extern bool efuse_program_map(struct ieee80211_hw *hw,
+			      char *p_filename, u8 tabletype);
+extern void efuse_reset_loader(struct ieee80211_hw *hw);
+
+#endif

drivers/net/wireless/rtlwifi/pci.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_PCI_H__
+#define __RTL_PCI_H__
+
+#include <linux/pci.h>
+/*
+1: MSDU packet queue,
+2: Rx Command Queue
+*/
+#define RTL_PCI_RX_MPDU_QUEUE			0
+#define RTL_PCI_RX_CMD_QUEUE			1
+#define RTL_PCI_MAX_RX_QUEUE			2
+
+#define RTL_PCI_MAX_RX_COUNT			64
+#define RTL_PCI_MAX_TX_QUEUE_COUNT		9
+
+#define RT_TXDESC_NUM				128
+#define RT_TXDESC_NUM_BE_QUEUE			256
+
+#define BK_QUEUE				0
+#define BE_QUEUE				1
+#define VI_QUEUE				2
+#define VO_QUEUE				3
+#define BEACON_QUEUE				4
+#define TXCMD_QUEUE				5
+#define MGNT_QUEUE				6
+#define HIGH_QUEUE				7
+#define HCCA_QUEUE				8
+
+#define RTL_PCI_DEVICE(vend, dev, cfg)  \
+	.vendor = (vend), \
+	.device = (dev), \
+	.subvendor = PCI_ANY_ID, \
+	.subdevice = PCI_ANY_ID,\
+	.driver_data = (kernel_ulong_t)&(cfg)
+
+#define INTEL_VENDOR_ID				0x8086
+#define SIS_VENDOR_ID				0x1039
+#define ATI_VENDOR_ID				0x1002
+#define ATI_DEVICE_ID				0x7914
+#define AMD_VENDOR_ID				0x1022
+
+#define PCI_MAX_BRIDGE_NUMBER			255
+#define PCI_MAX_DEVICES				32
+#define PCI_MAX_FUNCTION			8
+
+#define PCI_CONF_ADDRESS	0x0CF8	/*PCI Configuration Space Address */
+#define PCI_CONF_DATA		0x0CFC	/*PCI Configuration Space Data */
+
+#define PCI_CLASS_BRIDGE_DEV		0x06
+#define PCI_SUBCLASS_BR_PCI_TO_PCI	0x04
+#define PCI_CAPABILITY_ID_PCI_EXPRESS	0x10
+#define PCI_CAP_ID_EXP			0x10
+
+#define U1DONTCARE			0xFF
+#define U2DONTCARE			0xFFFF
+#define U4DONTCARE			0xFFFFFFFF
+
+#define RTL_PCI_8192_DID	0x8192	/*8192 PCI-E */
+#define RTL_PCI_8192SE_DID	0x8192	/*8192 SE */
+#define RTL_PCI_8174_DID	0x8174	/*8192 SE */
+#define RTL_PCI_8173_DID	0x8173	/*8191 SE Crab */
+#define RTL_PCI_8172_DID	0x8172	/*8191 SE RE */
+#define RTL_PCI_8171_DID	0x8171	/*8191 SE Unicron */
+#define RTL_PCI_0045_DID	0x0045	/*8190 PCI for Ceraga */
+#define RTL_PCI_0046_DID	0x0046	/*8190 Cardbus for Ceraga */
+#define RTL_PCI_0044_DID	0x0044	/*8192e PCIE for Ceraga */
+#define RTL_PCI_0047_DID	0x0047	/*8192e Express Card for Ceraga */
+#define RTL_PCI_700F_DID	0x700F
+#define RTL_PCI_701F_DID	0x701F
+#define RTL_PCI_DLINK_DID	0x3304
+#define RTL_PCI_8192CET_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192CE_DID	0x8178	/*8192ce */
+#define RTL_PCI_8191CE_DID	0x8177	/*8192ce */
+#define RTL_PCI_8188CE_DID	0x8176	/*8192ce */
+#define RTL_PCI_8192CU_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192DE_DID	0x092D	/*8192ce */
+#define RTL_PCI_8192DU_DID	0x092D	/*8192ce */
+
+/*8192 support 16 pages of IO registers*/
+#define RTL_MEM_MAPPED_IO_RANGE_8190PCI		0x1000
+#define RTL_MEM_MAPPED_IO_RANGE_8192PCIE	0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192SE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192CE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192DE		0x4000
+
+#define RTL_PCI_REVISION_ID_8190PCI		0x00
+#define RTL_PCI_REVISION_ID_8192PCIE		0x01
+#define RTL_PCI_REVISION_ID_8192SE		0x10
+#define RTL_PCI_REVISION_ID_8192CE		0x1
+#define RTL_PCI_REVISION_ID_8192DE		0x0
+
+#define RTL_DEFAULT_HARDWARE_TYPE	HARDWARE_TYPE_RTL8192CE
+
+enum pci_bridge_vendor {
+	PCI_BRIDGE_VENDOR_INTEL = 0x0,	/*0b'0000,0001 */
+	PCI_BRIDGE_VENDOR_ATI,		/*0b'0000,0010*/
+	PCI_BRIDGE_VENDOR_AMD,		/*0b'0000,0100*/
+	PCI_BRIDGE_VENDOR_SIS,		/*0b'0000,1000*/
+	PCI_BRIDGE_VENDOR_UNKNOWN,	/*0b'0100,0000*/
+	PCI_BRIDGE_VENDOR_MAX,
+};
+
+struct rtl_rx_desc {
+	u32 dword[8];
+} __attribute__ ((packed));
+
+struct rtl_tx_desc {
+	u32 dword[16];
+} __attribute__ ((packed));
+
+struct rtl_tx_cmd_desc {
+	u32 dword[16];
+} __attribute__ ((packed));
+
+struct rtl8192_tx_ring {
+	struct rtl_tx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	unsigned int entries;
+	struct sk_buff_head queue;
+};
+
+struct rtl8192_rx_ring {
+	struct rtl_rx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	struct sk_buff *rx_buf[RTL_PCI_MAX_RX_COUNT];
+};
+
+struct rtl_pci {
+	struct pci_dev *pdev;
+
+	bool driver_is_goingto_unload;
+	bool up_first_time;
+	bool being_init_adapter;
+	bool irq_enabled;
+
+	/*Tx */
+	struct rtl8192_tx_ring tx_ring[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	int txringcount[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	u32 transmit_config;
+
+	/*Rx */
+	struct rtl8192_rx_ring rx_ring[RTL_PCI_MAX_RX_QUEUE];
+	int rxringcount;
+	u16 rxbuffersize;
+	u32 receive_config;
+
+	/*irq */
+	u8 irq_alloc;
+	u32 irq_mask[2];
+
+	/*Bcn control register setting */
+	u32 reg_bcn_ctrl_val;
+
+	 /*ASPM*/ u8 const_pci_aspm;
+	u8 const_amdpci_aspm;
+	u8 const_hwsw_rfoff_d3;
+	u8 const_support_pciaspm;
+	/*pci-e bridge */
+	u8 const_hostpci_aspm_setting;
+	/*pci-e device */
+	u8 const_devicepci_aspm_setting;
+	/*If it supports ASPM, Offset[560h] = 0x40,
+	   otherwise Offset[560h] = 0x00. */
+	bool b_support_aspm;
+	bool b_support_backdoor;
+
+	/*QOS & EDCA */
+	enum acm_method acm_method;
+};
+
+struct mp_adapter {
+	u8 linkctrl_reg;
+
+	u8 busnumber;
+	u8 devnumber;
+	u8 funcnumber;
+
+	u8 pcibridge_busnum;
+	u8 pcibridge_devnum;
+	u8 pcibridge_funcnum;
+
+	u8 pcibridge_vendor;
+	u16 pcibridge_vendorid;
+	u16 pcibridge_deviceid;
+
+	u32 pcicfg_addrport;
+	u8 num4bytes;
+
+	u8 pcibridge_pciehdr_offset;
+	u8 pcibridge_linkctrlreg;
+
+	bool amd_l1_patch;
+};
+
+struct rtl_pci_priv {
+	struct rtl_pci dev;
+	struct mp_adapter ndis_adapter;
+	struct rtl_led_ctl ledctl;
+};
+
+#define rtl_pcipriv(hw)		(((struct rtl_pci_priv *)(rtl_priv(hw))->priv))
+#define rtl_pcidev(pcipriv)	(&((pcipriv)->dev))
+
+int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw);
+
+extern struct rtl_intf_ops rtl_pci_ops;
+
+int __devinit rtl_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id);
+void rtl_pci_disconnect(struct pci_dev *pdev);
+int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+int rtl_pci_resume(struct pci_dev *pdev);
+
+static inline u8 pci_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return 0xff & readb((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u16 pci_read16_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readw((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u32 pci_read32_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readl((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write8_async(struct rtl_priv *rtlpriv, u32 addr, u8 val)
+{
+	writeb(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write16_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u16 val)
+{
+	writew(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write32_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u32 val)
+{
+	writel(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void rtl_pci_raw_write_port_ulong(u32 port, u32 val)
+{
+	outl(val, port);
+}
+
+static inline void rtl_pci_raw_write_port_uchar(u32 port, u8 val)
+{
+	outb(val, port);
+}
+
+static inline void rtl_pci_raw_read_port_uchar(u32 port, u8 *pval)
+{
+	*pval = inb(port);
+}
+
+static inline void rtl_pci_raw_read_port_ushort(u32 port, u16 *pval)
+{
+	*pval = inw(port);
+}
+
+static inline void rtl_pci_raw_read_port_ulong(u32 port, u32 *pval)
+{
+	*pval = inl(port);
+}
+
+#endif

drivers/net/wireless/rtlwifi/ps.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "ps.h"
+
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool init_status = true;
+
+	/*<1> reset trx ring */
+	if (rtlhal->interface == INTF_PCI)
+		rtlpriv->intf_ops->reset_trx_ring(hw);
+
+	if (is_hal_stop(rtlhal))
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Driver is already down!\n"));
+
+	/*<2> Enable Adapter */
+	rtlpriv->cfg->ops->hw_init(hw);
+	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+	/*init_status = false; */
+
+	/*<3> Enable Interrupt */
+	rtlpriv->cfg->ops->enable_interrupt(hw);
+
+	/*<enable timer> */
+	rtl_watch_dog_timer_callback((unsigned long)hw);
+
+	return init_status;
+}
+EXPORT_SYMBOL(rtl_ps_enable_nic);
+
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw)
+{
+	bool status = true;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/*<1> Stop all timer */
+	rtl_deinit_deferred_work(hw);
+
+	/*<2> Disable Interrupt */
+	rtlpriv->cfg->ops->disable_interrupt(hw);
+
+	/*<3> Disable Adapter */
+	rtlpriv->cfg->ops->hw_disable(hw);
+
+	return status;
+}
+EXPORT_SYMBOL(rtl_ps_disable_nic);
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+			 enum rf_pwrstate state_toset,
+			 u32 changesource, bool protect_or_not)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+	bool b_actionallowed = false;
+	u16 rfwait_cnt = 0;
+	unsigned long flag;
+
+	/*protect_or_not = true; */
+
+	if (protect_or_not)
+		goto no_protect;
+
+	/*
+	 *Only one thread can change
+	 *the RF state at one time, and others
+	 *should wait to be executed.
+	 */
+	while (true) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		if (ppsc->rfchange_inprogress) {
+			spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+					       flag);
+
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 ("RF Change in progress!"
+				  "Wait to set..state_toset(%d).\n",
+				  state_toset));
+
+			/* Set RF after the previous action is done.  */
+			while (ppsc->rfchange_inprogress) {
+				rfwait_cnt++;
+				mdelay(1);
+
+				/*
+				 *Wait too long, return false to avoid
+				 *to be stuck here.
+				 */
+				if (rfwait_cnt > 100)
+					return false;
+			}
+		} else {
+			ppsc->rfchange_inprogress = true;
+			spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+					       flag);
+			break;
+		}
+	}
+
+no_protect:
+	rtstate = ppsc->rfpwr_state;
+
+	switch (state_toset) {
+	case ERFON:
+		ppsc->rfoff_reason &= (~changesource);
+
+		if ((changesource == RF_CHANGE_BY_HW) &&
+		    (ppsc->b_hwradiooff == true)) {
+			ppsc->b_hwradiooff = false;
+		}
+
+		if (!ppsc->rfoff_reason) {
+			ppsc->rfoff_reason = 0;
+			b_actionallowed = true;
+		}
+
+		break;
+
+	case ERFOFF:
+
+		if ((changesource == RF_CHANGE_BY_HW)
+		    && (ppsc->b_hwradiooff == false)) {
+			ppsc->b_hwradiooff = true;
+		}
+
+		ppsc->rfoff_reason |= changesource;
+		b_actionallowed = true;
+		break;
+
+	case ERFSLEEP:
+		ppsc->rfoff_reason |= changesource;
+		b_actionallowed = true;
+		break;
+
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+
+	if (b_actionallowed)
+		rtlpriv->cfg->ops->set_rf_power_state(hw, state_toset);
+
+	if (!protect_or_not) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	return b_actionallowed;
+}
+EXPORT_SYMBOL(rtl_ps_set_rf_state);
+
+static void _rtl_ps_inactive_ps(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	ppsc->b_swrf_processing = true;
+
+	if (ppsc->inactive_pwrstate == ERFON && rtlhal->interface == INTF_PCI) {
+		if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+		    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM) &&
+		    rtlhal->interface == INTF_PCI) {
+			rtlpriv->intf_ops->disable_aspm(hw);
+			RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+		}
+	}
+
+	rtl_ps_set_rf_state(hw, ppsc->inactive_pwrstate,
+			    RF_CHANGE_BY_IPS, false);
+
+	if (ppsc->inactive_pwrstate == ERFOFF &&
+	    rtlhal->interface == INTF_PCI) {
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+			rtlpriv->intf_ops->enable_aspm(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+		}
+	}
+
+	ppsc->b_swrf_processing = false;
+}
+
+void rtl_ips_nic_off_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks =
+	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+
+	if (mac->opmode != NL80211_IFTYPE_STATION) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("not station return\n"));
+		return;
+	}
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (ppsc->b_inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		/*
+		 *Do not enter IPS in the following conditions:
+		 *(1) RF is already OFF or Sleep
+		 *(2) b_swrf_processing (indicates the IPS is still under going)
+		 *(3) Connectted (only disconnected can trigger IPS)
+		 *(4) IBSS (send Beacon)
+		 *(5) AP mode (send Beacon)
+		 *(6) monitor mode (rcv packet)
+		 */
+
+		if (rtstate == ERFON &&
+		    !ppsc->b_swrf_processing &&
+		    (mac->link_state == MAC80211_NOLINK) &&
+		    !mac->act_scanning) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+				 ("IPSEnter(): Turn off RF.\n"));
+
+			ppsc->inactive_pwrstate = ERFOFF;
+			ppsc->b_in_powersavemode = true;
+
+			/*rtl_pci_reset_trx_ring(hw); */
+			_rtl_ps_inactive_ps(hw);
+		}
+	}
+}
+
+void rtl_ips_nic_off(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/*
+	 *because when link with ap, mac80211 will ask us
+	 *to disable nic quickly after scan before linking,
+	 *this will cause link failed, so we delay 100ms here
+	 */
+	queue_delayed_work(rtlpriv->works.rtl_wq,
+			   &rtlpriv->works.ips_nic_off_wq, MSECS(100));
+}
+
+void rtl_ips_nic_on(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+
+	down(&rtlpriv->locks.ips_sem);
+
+	if (ppsc->b_inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		if (rtstate != ERFON &&
+		    !ppsc->b_swrf_processing &&
+		    ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {
+
+			ppsc->inactive_pwrstate = ERFON;
+			ppsc->b_in_powersavemode = false;
+
+			_rtl_ps_inactive_ps(hw);
+		}
+	}
+
+	up(&rtlpriv->locks.ips_sem);
+}
+
+/*for FW LPS*/
+
+/*
+ *Determine if we can set Fw into PS mode
+ *in current condition.Return TRUE if it
+ *can enter PS mode.
+ */
+static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u32 ps_timediff;
+
+	ps_timediff = jiffies_to_msecs(jiffies -
+				       ppsc->last_delaylps_stamp_jiffies);
+
+	if (ps_timediff < 2000) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Delay enter Fw LPS for DHCP, ARP,"
+			  " or EAPOL exchanging state.\n"));
+		return false;
+	}
+
+	if (mac->link_state != MAC80211_LINKED)
+		return false;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return false;
+
+	return true;
+}
+
+/* Change current and default preamble mode.*/
+static void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 rpwm_val, fw_pwrmode;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	if (ppsc->dot11_psmode == rt_psmode)
+		return;
+
+	/* Update power save mode configured. */
+	ppsc->dot11_psmode = rt_psmode;
+
+	/*
+	 *<FW control LPS>
+	 *1. Enter PS mode
+	 *   Set RPWM to Fw to turn RF off and send H2C fw_pwrmode
+	 *   cmd to set Fw into PS mode.
+	 *2. Leave PS mode
+	 *   Send H2C fw_pwrmode cmd to Fw to set Fw into Active
+	 *   mode and set RPWM to turn RF on.
+	 */
+
+	if ((ppsc->b_fwctrl_lps) && (ppsc->b_leisure_ps) &&
+	     ppsc->report_linked) {
+		bool b_fw_current_inps;
+		if (ppsc->dot11_psmode == EACTIVE) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 ("FW LPS leave ps_mode:%x\n",
+				  FW_PS_ACTIVE_MODE));
+
+			rpwm_val = 0x0C;	/* RF on */
+			fw_pwrmode = FW_PS_ACTIVE_MODE;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+					(u8 *) (&rpwm_val));
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+					HW_VAR_H2C_FW_PWRMODE,
+					(u8 *) (&fw_pwrmode));
+			b_fw_current_inps = false;
+
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+					HW_VAR_FW_PSMODE_STATUS,
+					(u8 *) (&b_fw_current_inps));
+
+		} else {
+			if (rtl_get_fwlps_doze(hw)) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+						("FW LPS enter ps_mode:%x\n",
+						 ppsc->fwctrl_psmode));
+
+				rpwm_val = 0x02;	/* RF off */
+				b_fw_current_inps = true;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_FW_PSMODE_STATUS,
+						(u8 *) (&b_fw_current_inps));
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_H2C_FW_PWRMODE,
+						(u8 *) (&ppsc->fwctrl_psmode));
+
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_SET_RPWM,
+						(u8 *) (&rpwm_val));
+			} else {
+				/* Reset the power save related parameters. */
+				ppsc->dot11_psmode = EACTIVE;
+			}
+		}
+	}
+}
+
+/*Enter the leisure power save mode.*/
+void rtl_lps_enter(struct ieee80211_hw *hw)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	unsigned long flag;
+
+	if (!(ppsc->b_fwctrl_lps && ppsc->b_leisure_ps))
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (rtlpriv->link_info.b_busytraffic)
+		return;
+
+	/*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+	if (mac->cnt_after_linked < 5)
+		return;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+	if (ppsc->b_leisure_ps) {
+		/* Idle for a while if we connect to AP a while ago. */
+		if (mac->cnt_after_linked >= 2) {
+			if (ppsc->dot11_psmode == EACTIVE) {
+				RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+					("Enter 802.11 power save mode...\n"));
+
+				rtl_lps_set_psmode(hw, EAUTOPS);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
+
+/*Leave the leisure power save mode.*/
+void rtl_lps_leave(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	unsigned long flag;
+
+	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+	if (ppsc->b_fwctrl_lps && ppsc->b_leisure_ps) {
+		if (ppsc->dot11_psmode != EACTIVE) {
+
+			/*FIX ME */
+			rtlpriv->cfg->ops->enable_interrupt(hw);
+
+			if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM) &&
+			    rtlhal->interface == INTF_PCI) {
+				rtlpriv->intf_ops->disable_aspm(hw);
+				RT_CLEAR_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM);
+			}
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("Busy Traffic,Leave 802.11 power save..\n"));
+
+			rtl_lps_set_psmode(hw, EACTIVE);
+		}
+	}
+	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}

drivers/net/wireless/rtlwifi/ps.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __REALTEK_RTL_PCI_PS_H__
+#define __REALTEK_RTL_PCI_PS_H__
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+			 enum rf_pwrstate state_toset, u32 changesource,
+			 bool protect_or_not);
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
+void rtl_ips_nic_off(struct ieee80211_hw *hw);
+void rtl_ips_nic_on(struct ieee80211_hw *hw);
+void rtl_ips_nic_off_wq_callback(void *data);
+void rtl_lps_enter(struct ieee80211_hw *hw);
+void rtl_lps_leave(struct ieee80211_hw *hw);
+#endif

drivers/net/wireless/rtlwifi/rc.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_RC_H__
+#define __RTL_RC_H__
+
+struct rtl_rate_priv {
+	u8 cur_ratetab_idx;
+	u8 ht_cap;
+};
+
+int rtl_rate_control_register(void);
+void rtl_rate_control_unregister(void);
+#endif

drivers/net/wireless/rtlwifi/rtl8192ce/Makefile

+rtl8192ce-objs :=		\
+	rtl8192c-dm.o		\
+	rtl8192c-fw.o		\
+	rtl8192c-hw.o		\
+	rtl8192c-led.o		\
+	rtl8192c-phy.o		\
+	rtl8192c-rf.o		\
+	rtl8192c-sw.o		\
+	rtl8192c-table.o	\
+	rtl8192c-trx.o
+
+obj-$(CONFIG_RTL8192CE) += rtl8192ce.o