iwlegacy: s/index/idx/

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>

drivers/net/wireless/iwlegacy/iwl-3945-hw.h

@@ -81,7 +81,7 @@
 
 /*
  * Mapping of a Tx power level, at factory calibration temperature,
- *   to a radio/DSP gain table index.
+ *   to a radio/DSP gain table idx.
  * One for each of 5 "sample" power levels in each band.
  * v_det is measured at the factory, using the 3945's built-in power amplifier
  *   (PA) output voltage detector.  This same detector is used during Tx of
@@ -91,13 +91,13 @@
  * DO NOT ALTER THIS STRUCTURE!!!
  */
 struct il3945_eeprom_txpower_sample {
-	u8 gain_index;		/* index into power (gain) setup table ... */
+	u8 gain_idx;		/* idx into power (gain) setup table ... */
 	s8 power;		/* ... for this pwr level for this chnl group */
 	u16 v_det;		/* PA output voltage */
 } __packed;
 
 /*
- * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
+ * Mappings of Tx power levels -> nominal radio/DSP gain table idxes.
  * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
  * Tx power setup code interpolates between the 5 "sample" power levels
  *    to determine the nominal setup for a requested power level.

drivers/net/wireless/iwlegacy/iwl-3945-rs.c

@@ -60,7 +60,7 @@ static s32 il3945_expected_tpt_b[RATE_COUNT_3945] = {
 
 struct il3945_tpt_entry {
 	s8 min_rssi;
-	u8 index;
+	u8 idx;
 };
 
 static struct il3945_tpt_entry il3945_tpt_table_a[] = {
@@ -98,9 +98,9 @@ static struct il3945_tpt_entry il3945_tpt_table_g[] = {
 #define RATE_DECREASE_TH       1920
 #define RATE_RETRY_TH	     15
 
-static u8 il3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
+static u8 il3945_get_rate_idx_by_rssi(s32 rssi, enum ieee80211_band band)
 {
-	u32 index = 0;
+	u32 idx = 0;
 	u32 table_size = 0;
 	struct il3945_tpt_entry *tpt_table = NULL;
 
@@ -123,12 +123,12 @@ static u8 il3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
 		break;
 	}
 
-	while (index < table_size && rssi < tpt_table[index].min_rssi)
-		index++;
+	while (idx < table_size && rssi < tpt_table[idx].min_rssi)
+		idx++;
 
-	index = min(index, (table_size - 1));
+	idx = min(idx, (table_size - 1));
 
-	return tpt_table[index].index;
+	return tpt_table[idx].idx;
 }
 
 static void il3945_clear_win(struct il3945_rate_scale_data *win)
@@ -168,7 +168,7 @@ static int il3945_rate_scale_flush_wins(struct il3945_rs_sta *rs_sta)
 		if (time_after(jiffies, rs_sta->win[i].stamp +
 			       RATE_WIN_FLUSH)) {
 			D_RATE("flushing %d samples of rate "
-				       "index %d\n",
+				       "idx %d\n",
 				       rs_sta->win[i].counter, i);
 			il3945_clear_win(&rs_sta->win[i]);
 		} else
@@ -256,7 +256,7 @@ static void il3945_bg_rate_scale_flush(unsigned long data)
  */
 static void il3945_collect_tx_data(struct il3945_rs_sta *rs_sta,
 				struct il3945_rate_scale_data *win,
-				int success, int retries, int index)
+				int success, int retries, int idx)
 {
 	unsigned long flags;
 	s32 fail_count;
@@ -318,7 +318,7 @@ static void il3945_collect_tx_data(struct il3945_rs_sta *rs_sta,
 	if (fail_count >= RATE_MIN_FAILURE_TH ||
 	    win->success_counter >= RATE_MIN_SUCCESS_TH)
 		win->average_tpt = ((win->success_ratio *
-				rs_sta->expected_tpt[index] + 64) / 128);
+				rs_sta->expected_tpt[idx] + 64) / 128);
 	else
 		win->average_tpt = IL_INVALID_VALUE;
 
@@ -447,7 +447,7 @@ static void il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *
 			 struct sk_buff *skb)
 {
 	s8 retries = 0, current_count;
-	int scale_rate_index, first_index, last_index;
+	int scale_rate_idx, first_idx, last_idx;
 	unsigned long flags;
 	struct il_priv *il = (struct il_priv *)il_rate;
 	struct il3945_rs_sta *rs_sta = il_sta;
@@ -460,9 +460,9 @@ static void il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *
 	if (retries > RATE_RETRY_TH)
 		retries = RATE_RETRY_TH;
 
-	first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
-	if (first_index < 0 || first_index >= RATE_COUNT_3945) {
-		D_RATE("leave: Rate out of bounds: %d\n", first_index);
+	first_idx = sband->bitrates[info->status.rates[0].idx].hw_value;
+	if (first_idx < 0 || first_idx >= RATE_COUNT_3945) {
+		D_RATE("leave: Rate out of bounds: %d\n", first_idx);
 		return;
 	}
 
@@ -480,8 +480,8 @@ static void il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *
 
 	rs_sta->tx_packets++;
 
-	scale_rate_index = first_index;
-	last_index = first_index;
+	scale_rate_idx = first_idx;
+	last_idx = first_idx;
 
 	/*
 	 * Update the win for each rate.  We determine which rates
@@ -489,42 +489,42 @@ static void il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *
 	 * of retries configured for each rate -- currently set to the
 	 * il value 'retry_rate' vs. rate specific
 	 *
-	 * On exit from this while loop last_index indicates the rate
+	 * On exit from this while loop last_idx indicates the rate
 	 * at which the frame was finally transmitted (or failed if no
 	 * ACK)
 	 */
 	while (retries > 1) {
 		if ((retries - 1) < il->retry_rate) {
 			current_count = (retries - 1);
-			last_index = scale_rate_index;
+			last_idx = scale_rate_idx;
 		} else {
 			current_count = il->retry_rate;
-			last_index = il3945_rs_next_rate(il,
-							 scale_rate_index);
+			last_idx = il3945_rs_next_rate(il,
+							 scale_rate_idx);
 		}
 
 		/* Update this rate accounting for as many retries
 		 * as was used for it (per current_count) */
 		il3945_collect_tx_data(rs_sta,
-				    &rs_sta->win[scale_rate_index],
-				    0, current_count, scale_rate_index);
+				    &rs_sta->win[scale_rate_idx],
+				    0, current_count, scale_rate_idx);
 		D_RATE("Update rate %d for %d retries.\n",
-			       scale_rate_index, current_count);
+			       scale_rate_idx, current_count);
 
 		retries -= current_count;
 
-		scale_rate_index = last_index;
+		scale_rate_idx = last_idx;
 	}
 
 
-	/* Update the last index win with success/failure based on ACK */
+	/* Update the last idx win with success/failure based on ACK */
 	D_RATE("Update rate %d with %s.\n",
-		       last_index,
+		       last_idx,
 		       (info->flags & IEEE80211_TX_STAT_ACK) ?
 		       "success" : "failure");
 	il3945_collect_tx_data(rs_sta,
-			    &rs_sta->win[last_index],
-			    info->flags & IEEE80211_TX_STAT_ACK, 1, last_index);
+			    &rs_sta->win[last_idx],
+			    info->flags & IEEE80211_TX_STAT_ACK, 1, last_idx);
 
 	/* We updated the rate scale win -- if its been more than
 	 * flush_time since the last run, schedule the flush
@@ -547,7 +547,7 @@ static void il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *
 }
 
 static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
-				 u8 index, u16 rate_mask, enum ieee80211_band band)
+				 u8 idx, u16 rate_mask, enum ieee80211_band band)
 {
 	u8 high = RATE_INVALID;
 	u8 low = RATE_INVALID;
@@ -560,7 +560,7 @@ static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
 		u32 mask;
 
 		/* Find the previous rate that is in the rate mask */
-		i = index - 1;
+		i = idx - 1;
 		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
 			if (rate_mask & mask) {
 				low = i;
@@ -569,7 +569,7 @@ static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
 		}
 
 		/* Find the next rate that is in the rate mask */
-		i = index + 1;
+		i = idx + 1;
 		for (mask = (1 << i); i < RATE_COUNT_3945;
 		     i++, mask <<= 1) {
 			if (rate_mask & mask) {
@@ -581,7 +581,7 @@ static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
 		return (high << 8) | low;
 	}
 
-	low = index;
+	low = idx;
 	while (low != RATE_INVALID) {
 		if (rs_sta->tgg)
 			low = il3945_rates[low].prev_rs_tgg;
@@ -594,7 +594,7 @@ static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
 		D_RATE("Skipping masked lower rate: %d\n", low);
 	}
 
-	high = index;
+	high = idx;
 	while (high != RATE_INVALID) {
 		if (rs_sta->tgg)
 			high = il3945_rates[high].next_rs_tgg;
@@ -622,7 +622,7 @@ static u16 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta,
  * the entire A/B/G spectrum vs. being limited to just one particular
  * hw_mode.
  *
- * As such, we can't convert the index obtained below into the hw_mode's
+ * As such, we can't convert the idx obtained below into the hw_mode's
  * rate table and must reference the driver allocated rate table
  *
  */
@@ -634,7 +634,7 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 	u8 low = RATE_INVALID;
 	u8 high = RATE_INVALID;
 	u16 high_low;
-	int index;
+	int idx;
 	struct il3945_rs_sta *rs_sta = il_sta;
 	struct il3945_rate_scale_data *win = NULL;
 	int current_tpt = IL_INVALID_VALUE;
@@ -668,7 +668,7 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 	if (max_rate_idx < 0 || max_rate_idx >= RATE_COUNT)
 		max_rate_idx = -1;
 
-	index = min(rs_sta->last_txrate_idx & 0xffff, RATE_COUNT_3945 - 1);
+	idx = min(rs_sta->last_txrate_idx & 0xffff, RATE_COUNT_3945 - 1);
 
 	if (sband->band == IEEE80211_BAND_5GHZ)
 		rate_mask = rate_mask << IL_FIRST_OFDM_RATE;
@@ -679,19 +679,19 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 	 * to rssi value
 	 */
 	if (rs_sta->start_rate != RATE_INVALID) {
-		if (rs_sta->start_rate < index &&
+		if (rs_sta->start_rate < idx &&
 		   (rate_mask & (1 << rs_sta->start_rate)))
-			index = rs_sta->start_rate;
+			idx = rs_sta->start_rate;
 		rs_sta->start_rate = RATE_INVALID;
 	}
 
 	/* force user max rate if set by user */
-	if (max_rate_idx != -1 && max_rate_idx < index) {
+	if (max_rate_idx != -1 && max_rate_idx < idx) {
 		if (rate_mask & (1 << max_rate_idx))
-			index = max_rate_idx;
+			idx = max_rate_idx;
 	}
 
-	win = &(rs_sta->win[index]);
+	win = &(rs_sta->win[idx]);
 
 	fail_count = win->counter - win->success_counter;
 
@@ -702,7 +702,7 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 		D_RATE("Invalid average_tpt on rate %d: "
 			       "counter: %d, success_counter: %d, "
 			       "expected_tpt is %sNULL\n",
-			       index,
+			       idx,
 			       win->counter,
 			       win->success_counter,
 			       rs_sta->expected_tpt ? "not " : "");
@@ -715,7 +715,7 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 
 	current_tpt = win->average_tpt;
 
-	high_low = il3945_get_adjacent_rate(rs_sta, index, rate_mask,
+	high_low = il3945_get_adjacent_rate(rs_sta, idx, rate_mask,
 					     sband->band);
 	low = high_low & 0xff;
 	high = (high_low >> 8) & 0xff;
@@ -800,13 +800,13 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 
 		/* Decrese rate */
 		if (low != RATE_INVALID)
-			index = low;
+			idx = low;
 		break;
 
 	case 1:
 		/* Increase rate */
 		if (high != RATE_INVALID)
-			index = high;
+			idx = high;
 
 		break;
 
@@ -817,21 +817,21 @@ static void il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta,
 	}
 
 	D_RATE("Selected %d (action %d) - low %d high %d\n",
-		       index, scale_action, low, high);
+		       idx, scale_action, low, high);
 
  out:
 
 	if (sband->band == IEEE80211_BAND_5GHZ) {
-		if (WARN_ON_ONCE(index < IL_FIRST_OFDM_RATE))
-			index = IL_FIRST_OFDM_RATE;
-		rs_sta->last_txrate_idx = index;
-		info->control.rates[0].idx = index - IL_FIRST_OFDM_RATE;
+		if (WARN_ON_ONCE(idx < IL_FIRST_OFDM_RATE))
+			idx = IL_FIRST_OFDM_RATE;
+		rs_sta->last_txrate_idx = idx;
+		info->control.rates[0].idx = idx - IL_FIRST_OFDM_RATE;
 	} else {
-		rs_sta->last_txrate_idx = index;
+		rs_sta->last_txrate_idx = idx;
 		info->control.rates[0].idx = rs_sta->last_txrate_idx;
 	}
 
-	D_RATE("leave: %d\n", index);
+	D_RATE("leave: %d\n", idx);
 }
 
 #ifdef CONFIG_MAC80211_DEBUGFS
@@ -855,7 +855,7 @@ static ssize_t il3945_sta_dbgfs_stats_table_read(struct file *file,
 	if (!buff)
 		return -ENOMEM;
 
-	desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n"
+	desc += sprintf(buff + desc, "tx packets=%d last rate idx=%d\n"
 			"rate=0x%X flush time %d\n",
 			lq_sta->tx_packets,
 			lq_sta->last_txrate_idx,
@@ -977,9 +977,9 @@ void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 
 	D_RATE("Network RSSI: %d\n", rssi);
 
-	rs_sta->start_rate = il3945_get_rate_index_by_rssi(rssi, il->band);
+	rs_sta->start_rate = il3945_get_rate_idx_by_rssi(rssi, il->band);
 
-	D_RATE("leave: rssi %d assign rate index: "
+	D_RATE("leave: rssi %d assign rate idx: "
 		       "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate,
 		       il3945_rates[rs_sta->start_rate].plcp);
 	rcu_read_unlock();

drivers/net/wireless/iwlegacy/iwl-4965-hw.h

@@ -203,7 +203,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  * 1)  Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
  *     Do not exceed regulatory limit; reduce target txpower if necessary.
  *
- *     If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
+ *     If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
  *     2 transmitters will be used simultaneously; driver must reduce the
  *     regulatory limit by 3 dB (half-power) for each transmitter, so the
  *     combined total output of the 2 transmitters is within regulatory limits.
@@ -269,7 +269,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *     be used (although only one at a time) even for non-MIMO transmissions.
  *
  *     Driver should interpolate factory values for temperature, gain table
- *     index, and actual power.  The power amplifier detector values are
+ *     idx, and actual power.  The power amplifier detector values are
  *     not used by the driver.
  *
  *     Sanity check:  If the target channel happens to be one of the sample
@@ -278,13 +278,13 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *
  *
  * 5)  Find difference between desired txpower and (interpolated)
- *     factory-measured txpower.  Using (interpolated) factory gain table index
- *     (shown elsewhere) as a starting point, adjust this index lower to
+ *     factory-measured txpower.  Using (interpolated) factory gain table idx
+ *     (shown elsewhere) as a starting point, adjust this idx lower to
  *     increase txpower, or higher to decrease txpower, until the target
  *     txpower is reached.  Each step in the gain table is 1/2 dB.
  *
  *     For example, if factory measured txpower is 16 dBm, and target txpower
- *     is 13 dBm, add 6 steps to the factory gain index to reduce txpower
+ *     is 13 dBm, add 6 steps to the factory gain idx to reduce txpower
  *     by 3 dB.
  *
  *
@@ -294,7 +294,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *     "4965 temperature calculation".
  *
  *     If current temperature is higher than factory temperature, driver must
- *     increase gain (lower gain table index), and vice verse.
+ *     increase gain (lower gain table idx), and vice verse.
  *
  *     Temperature affects gain differently for different channels:
  *
@@ -313,16 +313,16 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *     indicator (EEPROM).
  *
  *     If the current voltage is higher (indicator is lower) than factory
- *     voltage, gain should be reduced (gain table index increased) by:
+ *     voltage, gain should be reduced (gain table idx increased) by:
  *
  *     (eeprom - current) / 7
  *
  *     If the current voltage is lower (indicator is higher) than factory
- *     voltage, gain should be increased (gain table index decreased) by:
+ *     voltage, gain should be increased (gain table idx decreased) by:
  *
  *     2 * (current - eeprom) / 7
  *
- *     If number of index steps in either direction turns out to be > 2,
+ *     If number of idx steps in either direction turns out to be > 2,
  *     something is wrong ... just use 0.
  *
  *     NOTE:  Voltage compensation is independent of band/channel.
@@ -333,7 +333,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *            may be calculated once and used until the next uCode bootload.
  *
  *
- * 8)  If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
+ * 8)  If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
  *     adjust txpower for each transmitter chain, so txpower is balanced
  *     between the two chains.  There are 5 pairs of tx_atten[group][chain]
  *     values in "initialize alive", one pair for each of 5 channel ranges:
@@ -344,7 +344,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *     Group 3:  5 GHz channel 125-200
  *     Group 4:  2.4 GHz all channels
  *
- *     Add the tx_atten[group][chain] value to the index for the target chain.
+ *     Add the tx_atten[group][chain] value to the idx for the target chain.
  *     The values are signed, but are in pairs of 0 and a non-negative number,
  *     so as to reduce gain (if necessary) of the "hotter" channel.  This
  *     avoids any need to double-check for regulatory compliance after
@@ -352,7 +352,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *
  *
  * 9)  If setting up for a CCK rate, lower the gain by adding a CCK compensation
- *     value to the index:
+ *     value to the idx:
  *
  *     Hardware rev B:  9 steps (4.5 dB)
  *     Hardware rev C:  5 steps (2.5 dB)
@@ -366,7 +366,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *
  * 10) Select the gain table, based on band (2.4 vs 5 GHz).
  *
- *     Limit the adjusted index to stay within the table!
+ *     Limit the adjusted idx to stay within the table!
  *
  *
  * 11) Read gain table entries for DSP and radio gain, place into appropriate
@@ -389,7 +389,7 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  *
  * When calculating txpowers for CCK, after making sure that the target power
  * is within regulatory and saturation limits, driver must additionally
- * back off gain by adding these values to the gain table index.
+ * back off gain by adding these values to the gain table idx.
  *
  * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
  * bits [3:2], 1 = B, 2 = C.
@@ -428,9 +428,9 @@ static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
  * driver work with the same table).
  *
  * There are separate tables for 2.4 GHz and 5 GHz bands.  The 5 GHz table
- * has an extension (into negative indexes), in case the driver needs to
+ * has an extension (into negative idxes), in case the driver needs to
  * boost power setting for high device temperatures (higher than would be
- * present during factory calibration).  A 5 Ghz EEPROM index of "40"
+ * present during factory calibration).  A 5 Ghz EEPROM idx of "40"
  * corresponds to the 49th entry in the table used by the driver.
  */
 #define MIN_TX_GAIN_IDX		(0)  /* highest gain, lowest idx, 2.4 */
@@ -778,8 +778,8 @@ enum {
  *
  * When driver sets up a new TFD, it must also enter the total byte count
  * of the frame to be transmitted into the corresponding entry in the byte
- * count table for the chosen Tx queue.  If the TFD index is 0-63, the driver
- * must duplicate the byte count entry in corresponding index 256-319.
+ * count table for the chosen Tx queue.  If the TFD idx is 0-63, the driver
+ * must duplicate the byte count entry in corresponding idx 256-319.
  *
  * padding puts each byte count table on a 1024-byte boundary;
  * 4965 assumes tables are separated by 1024 bytes.

drivers/net/wireless/iwlegacy/iwl-4965-lib.c

@@ -105,7 +105,7 @@ int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
 	/* Stop Rx DMA */
 	il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 
-	/* Reset driver's Rx queue write index */
+	/* Reset driver's Rx queue write idx */
 	il_wr(il, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
 
 	/* Tell device where to find RBD circular buffer in DRAM */
@@ -222,7 +222,7 @@ static inline __le32 il4965_dma_addr2rbd_ptr(struct il_priv *il,
  * and we have free pre-allocated buffers, fill the ranks as much
  * as we can, pulling from rx_free.
  *
- * This moves the 'write' index forward to catch up with 'processed', and
+ * This moves the 'write' idx forward to catch up with 'processed', and
  * also updates the memory address in the firmware to reference the new
  * target buffer.
  */

drivers/net/wireless/iwlegacy/iwl-4965-sta.c

@@ -157,7 +157,7 @@ static int il4965_static_wepkey_cmd(struct il_priv *il,
 			(sizeof(struct il_wep_key) * WEP_KEYS_MAX));
 
 	for (i = 0; i < WEP_KEYS_MAX ; i++) {
-		wep_cmd->key[i].key_index = i;
+		wep_cmd->key[i].key_idx = i;
 		if (ctx->wep_keys[i].key_size) {
 			wep_cmd->key[i].key_offset = i;
 			not_empty = 1;
@@ -283,7 +283,7 @@ static int il4965_set_wep_dynamic_key_info(struct il_priv *il,
 	if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
 		il->stations[sta_id].sta.key.key_offset =
-				 il_get_free_ucode_key_index(il);
+				 il_get_free_ucode_key_idx(il);
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
@@ -334,7 +334,7 @@ static int il4965_set_ccmp_dynamic_key_info(struct il_priv *il,
 	if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
 		il->stations[sta_id].sta.key.key_offset =
-				 il_get_free_ucode_key_index(il);
+				 il_get_free_ucode_key_idx(il);
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
@@ -379,7 +379,7 @@ static int il4965_set_tkip_dynamic_key_info(struct il_priv *il,
 	if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
 		il->stations[sta_id].sta.key.key_offset =
-				 il_get_free_ucode_key_index(il);
+				 il_get_free_ucode_key_idx(il);
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
@@ -457,9 +457,9 @@ int il4965_remove_dynamic_key(struct il_priv *il,
 		      keyconf->keyidx, sta_id);
 
 	if (keyconf->keyidx != keyidx) {
-		/* We need to remove a key with index different that the one
+		/* We need to remove a key with idx different that the one
 		 * in the uCode. This means that the key we need to remove has
-		 * been replaced by another one with different index.
+		 * been replaced by another one with different idx.
 		 * Don't do anything and return ok
 		 */
 		spin_unlock_irqrestore(&il->sta_lock, flags);
@@ -475,7 +475,7 @@ int il4965_remove_dynamic_key(struct il_priv *il,
 
 	if (!test_and_clear_bit(il->stations[sta_id].sta.key.key_offset,
 		&il->ucode_key_table))
-		IL_ERR("index %d not used in uCode key table.\n",
+		IL_ERR("idx %d not used in uCode key table.\n",
 			il->stations[sta_id].sta.key.key_offset);
 	memset(&il->stations[sta_id].keyinfo, 0,
 					sizeof(struct il_hw_key));

drivers/net/wireless/iwlegacy/iwl-4965-tx.c

@@ -183,7 +183,7 @@ static void il4965_tx_cmd_build_rate(struct il_priv *il,
 	/* DATA packets will use the uCode station table for rate/antenna
 	 * selection */
 	if (ieee80211_is_data(fc)) {
-		tx_cmd->initial_rate_index = 0;
+		tx_cmd->initial_rate_idx = 0;
 		tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
 		return;
 	}
@@ -192,7 +192,7 @@ static void il4965_tx_cmd_build_rate(struct il_priv *il,
 	 * If the current TX rate stored in mac80211 has the MCS bit set, it's
 	 * not really a TX rate.  Thus, we use the lowest supported rate for
 	 * this band.  Also use the lowest supported rate if the stored rate
-	 * index is invalid.
+	 * idx is invalid.
 	 */
 	rate_idx = info->control.rates[0].idx;
 	if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) ||
@@ -319,7 +319,7 @@ int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb)
 	if (!ieee80211_is_data(fc))
 		sta_id = ctx->bcast_sta_id;
 	else {
-		/* Find index into station table for destination station */
+		/* Find idx into station table for destination station */
 		sta_id = il_sta_id_or_broadcast(il, ctx, info->control.sta);
 
 		if (sta_id == IL_INVALID_STATION) {
@@ -417,7 +417,7 @@ int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb)
 
 	/*
 	 * Set up the Tx-command (not MAC!) header.
-	 * Store the chosen Tx queue and TFD index within the sequence field;
+	 * Store the chosen Tx queue and TFD idx within the sequence field;
 	 * after Tx, uCode's Tx response will return this value so driver can
 	 * locate the frame within the tx queue and do post-tx processing.
 	 */
@@ -513,7 +513,7 @@ int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb)
 	pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys,
 				       firstlen, PCI_DMA_BIDIRECTIONAL);
 
-	/* Tell device the write index *just past* this latest filled TFD */
+	/* Tell device the write idx *just past* this latest filled TFD */
 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
 	il_txq_update_write_ptr(il, txq);
 	spin_unlock_irqrestore(&il->lock, flags);
@@ -828,7 +828,7 @@ static int il4965_txq_agg_enable(struct il_priv *il, int txq_id,
 	/* Set this queue as a chain-building queue */
 	il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
 
-	/* Place first TFD at index corresponding to start sequence number.
+	/* Place first TFD at idx corresponding to start sequence number.
 	 * Assumes that ssn_idx is valid (!= 0xFFF) */
 	il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
 	il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
@@ -1105,7 +1105,7 @@ il4965_tx_status(struct il_priv *il, struct il_tx_info *tx_info,
 	ieee80211_tx_status_irqsafe(il->hw, tx_info->skb);
 }
 
-int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int index)
+int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
 {
 	struct il_tx_queue *txq = &il->txq[txq_id];
 	struct il_queue *q = &txq->q;
@@ -1113,15 +1113,15 @@ int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int index)
 	int nfreed = 0;
 	struct ieee80211_hdr *hdr;
 
-	if (index >= q->n_bd || il_queue_used(q, index) == 0) {
-		IL_ERR("Read index for DMA queue txq id (%d), index %d, "
+	if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
+		IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
 			  "is out of range [0-%d] %d %d.\n", txq_id,
-			  index, q->n_bd, q->write_ptr, q->read_ptr);
+			  idx, q->n_bd, q->write_ptr, q->read_ptr);
 		return 0;
 	}
 
-	for (index = il_queue_inc_wrap(index, q->n_bd);
-	     q->read_ptr != index;
+	for (idx = il_queue_inc_wrap(idx, q->n_bd);
+	     q->read_ptr != idx;
 	     q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
 		tx_info = &txq->txb[txq->q.read_ptr];
@@ -1252,7 +1252,7 @@ void il4965_rx_reply_compressed_ba(struct il_priv *il,
 	struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
 	struct il_tx_queue *txq = NULL;
 	struct il_ht_agg *agg;
-	int index;
+	int idx;
 	int sta_id;
 	int tid;
 	unsigned long flags;
@@ -1260,7 +1260,7 @@ void il4965_rx_reply_compressed_ba(struct il_priv *il,
 	/* "flow" corresponds to Tx queue */
 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
 
-	/* "ssn" is start of block-ack Tx win, corresponds to index
+	/* "ssn" is start of block-ack Tx win, corresponds to idx
 	 * (in Tx queue's circular buffer) of first TFD/frame in win */
 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
 
@@ -1287,8 +1287,8 @@ void il4965_rx_reply_compressed_ba(struct il_priv *il,
 		return;
 	}
 
-	/* Find index just before block-ack win */
-	index = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
+	/* Find idx just before block-ack win */
+	idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
 
 	spin_lock_irqsave(&il->sta_lock, flags);
 
@@ -1317,7 +1317,7 @@ void il4965_rx_reply_compressed_ba(struct il_priv *il,
 	 * transmitted ... if not, it's too late anyway). */
 	if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
 		/* calculate mac80211 ampdu sw queue to wake */
-		int freed = il4965_tx_queue_reclaim(il, scd_flow, index);
+		int freed = il4965_tx_queue_reclaim(il, scd_flow, idx);
 		il4965_free_tfds_in_queue(il, sta_id, tid, freed);
 
 		if (il_queue_space(&txq->q) > txq->q.low_mark &&

drivers/net/wireless/iwlegacy/iwl-4965.c

@@ -446,12 +446,12 @@ static s32 il4965_math_div_round(s32 num, s32 denom, s32 *res)
  * il4965_get_voltage_compensation - Power supply voltage comp for txpower
  *
  * Determines power supply voltage compensation for txpower calculations.
- * Returns number of 1/2-dB steps to subtract from gain table index,
+ * Returns number of 1/2-dB steps to subtract from gain table idx,
  * to compensate for difference between power supply voltage during
  * factory measurements, vs. current power supply voltage.
  *
  * Voltage indication is higher for lower voltage.
- * Lower voltage requires more gain (lower gain table index).
+ * Lower voltage requires more gain (lower gain table idx).
  */
 static s32 il4965_get_voltage_compensation(s32 eeprom_voltage,
 					    s32 current_voltage)
@@ -628,10 +628,10 @@ static struct il4965_txpower_comp_entry {
 	{3, 1}			/* group 4 2.4, ch   all */
 };
 
-static s32 get_min_power_index(s32 rate_power_index, u32 band)
+static s32 get_min_power_idx(s32 rate_power_idx, u32 band)
 {
 	if (!band) {
-		if ((rate_power_index & 7) <= 4)
+		if ((rate_power_idx & 7) <= 4)
 			return MIN_TX_GAIN_IDX_52GHZ_EXT;
 	}
 	return MIN_TX_GAIN_IDX;
@@ -643,7 +643,7 @@ struct gain_entry {
 };
 
 static const struct gain_entry gain_table[2][108] = {
-	/* 5.2GHz power gain index table */
+	/* 5.2GHz power gain idx table */
 	{
 	 {123, 0x3F},		/* highest txpower */
 	 {117, 0x3F},
@@ -754,7 +754,7 @@ static const struct gain_entry gain_table[2][108] = {
 	 {83, 0x00},
 	 {78, 0x00},
 	 },
-	/* 2.4GHz power gain index table */
+	/* 2.4GHz power gain idx table */
 	{
 	 {110, 0x3f},		/* highest txpower */
 	 {104, 0x3f},
@@ -891,12 +891,12 @@ static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
 	s32 degrees_per_05db_denom;
 	s32 factory_temp;
 	s32 temperature_comp[2];
-	s32 factory_gain_index[2];
+	s32 factory_gain_idx[2];
 	s32 factory_actual_pwr[2];
-	s32 power_index;
+	s32 power_idx;
 
 	/* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
-	 *   are used for indexing into txpower table) */
+	 *   are used for idxing into txpower table) */
 	user_target_power = 2 * il->tx_power_user_lmt;
 
 	/* Get current (RXON) channel, band, width */
@@ -995,7 +995,7 @@ static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
 				       degrees_per_05db_num,
 				       &temperature_comp[c]);
 
-		factory_gain_index[c] = measurement->gain_idx;
+		factory_gain_idx[c] = measurement->gain_idx;
 		factory_actual_pwr[c] = measurement->actual_pow;
 
 		D_TXPOWER("chain = %d\n", c);
@@ -1005,7 +1005,7 @@ static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
 				  temperature_comp[c]);
 
 		D_TXPOWER("fctry idx %d, fctry pwr %d\n",
-				  factory_gain_index[c],
+				  factory_gain_idx[c],
 				  factory_actual_pwr[c]);
 	}
 
@@ -1053,50 +1053,50 @@ static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
 			else
 				atten_value = 0;
 
-			/* calculate index; higher index means lower txpower */
-			power_index = (u8) (factory_gain_index[c] -
+			/* calculate idx; higher idx means lower txpower */
+			power_idx = (u8) (factory_gain_idx[c] -
 					    (target_power -
 					     factory_actual_pwr[c]) -
 					    temperature_comp[c] -
 					    voltage_compensation +
 					    atten_value);
 
-/*			D_TXPOWER("calculated txpower index %d\n",
-						power_index); */
+/*			D_TXPOWER("calculated txpower idx %d\n",
+						power_idx); */
 
-			if (power_index < get_min_power_index(i, band))
-				power_index = get_min_power_index(i, band);
+			if (power_idx < get_min_power_idx(i, band))
+				power_idx = get_min_power_idx(i, band);
 
-			/* adjust 5 GHz index to support negative indexes */
+			/* adjust 5 GHz idx to support negative idxes */
 			if (!band)
-				power_index += 9;
+				power_idx += 9;
 
 			/* CCK, rate 32, reduce txpower for CCK */
 			if (i == POWER_TABLE_CCK_ENTRY)
-				power_index +=
+				power_idx +=
 				    IL_TX_POWER_CCK_COMPENSATION_C_STEP;
 
 			/* stay within the table! */
-			if (power_index > 107) {
-				IL_WARN("txpower index %d > 107\n",
-					    power_index);
-				power_index = 107;
+			if (power_idx > 107) {
+				IL_WARN("txpower idx %d > 107\n",
+					    power_idx);
+				power_idx = 107;
 			}
-			if (power_index < 0) {
-				IL_WARN("txpower index %d < 0\n",
-					    power_index);
-				power_index = 0;
+			if (power_idx < 0) {
+				IL_WARN("txpower idx %d < 0\n",
+					    power_idx);
+				power_idx = 0;
 			}
 
 			/* fill txpower command for this rate/chain */
 			tx_power.s.radio_tx_gain[c] =
-				gain_table[band][power_index].radio;
+				gain_table[band][power_idx].radio;
 			tx_power.s.dsp_predis_atten[c] =
-				gain_table[band][power_index].dsp;
+				gain_table[band][power_idx].dsp;
 
-			D_TXPOWER("chain %d mimo %d index %d "
+			D_TXPOWER("chain %d mimo %d idx %d "
 					  "gain 0x%02x dsp %d\n",
-					  c, atten_value, power_index,
+					  c, atten_value, power_idx,
 					tx_power.s.radio_tx_gain[c],
 					tx_power.s.dsp_predis_atten[c]);
 		} /* for each chain */
@@ -1777,7 +1777,7 @@ static void il4965_rx_reply_tx(struct il_priv *il,
 	struct il_rx_pkt *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
-	int index = SEQ_TO_IDX(sequence);
+	int idx = SEQ_TO_IDX(sequence);
 	struct il_tx_queue *txq = &il->txq[txq_id];
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_tx_info *info;
@@ -1789,10 +1789,10 @@ static void il4965_rx_reply_tx(struct il_priv *il,
 	u8 *qc = NULL;
 	unsigned long flags;
 
-	if (index >= txq->q.n_bd || il_queue_used(&txq->q, index) == 0) {
-		IL_ERR("Read index for DMA queue txq_id (%d) index %d "
+	if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
+		IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
 			  "is out of range [0-%d] %d %d\n", txq_id,
-			  index, txq->q.n_bd, txq->q.write_ptr,
+			  idx, txq->q.n_bd, txq->q.write_ptr,
 			  txq->q.read_ptr);
 		return;
 	}
@@ -1801,7 +1801,7 @@ static void il4965_rx_reply_tx(struct il_priv *il,
 	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
 	memset(&info->status, 0, sizeof(info->status));
 
-	hdr = il_tx_queue_get_hdr(il, txq_id, index);
+	hdr = il_tx_queue_get_hdr(il, txq_id, idx);
 	if (ieee80211_is_data_qos(hdr->frame_control)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & 0xf;
@@ -1821,18 +1821,18 @@ static void il4965_rx_reply_tx(struct il_priv *il,
 
 		agg = &il->stations[sta_id].tid[tid].agg;
 
-		il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, index);
+		il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
 
 		/* check if BAR is needed */
 		if ((tx_resp->frame_count == 1) && !il4965_is_tx_success(status))
 			info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 
 		if (txq->q.read_ptr != (scd_ssn & 0xff)) {
-			index = il_queue_dec_wrap(scd_ssn & 0xff,
+			idx = il_queue_dec_wrap(scd_ssn & 0xff,
 								txq->q.n_bd);
 			D_TX_REPLY("Retry scheduler reclaim scd_ssn "
-					   "%d index %d\n", scd_ssn , index);
-			freed = il4965_tx_queue_reclaim(il, txq_id, index);
+					   "%d idx %d\n", scd_ssn , idx);
+			freed = il4965_tx_queue_reclaim(il, txq_id, idx);
 			if (qc)
 				il4965_free_tfds_in_queue(il, sta_id,
 						       tid, freed);
@@ -1856,7 +1856,7 @@ static void il4965_rx_reply_tx(struct il_priv *il,
 				   le32_to_cpu(tx_resp->rate_n_flags),
 				   tx_resp->failure_frame);
 
-		freed = il4965_tx_queue_reclaim(il, txq_id, index);
+		freed = il4965_tx_queue_reclaim(il, txq_id, idx);
 		if (qc && likely(sta_id != IL_INVALID_STATION))
 			il4965_free_tfds_in_queue(il, sta_id, tid, freed);
 		else if (sta_id == IL_INVALID_STATION)

drivers/net/wireless/iwlegacy/iwl-4965.h

@@ -123,7 +123,7 @@ int il4965_txq_check_empty(struct il_priv *il,
 			   int sta_id, u8 tid, int txq_id);
 void il4965_rx_reply_compressed_ba(struct il_priv *il,
 				struct il_rx_buf *rxb);
-int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int index);
+int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx);
 void il4965_hw_txq_ctx_free(struct il_priv *il);
 int il4965_txq_ctx_alloc(struct il_priv *il);
 void il4965_txq_ctx_reset(struct il_priv *il);
@@ -133,7 +133,7 @@ void il4965_txq_set_sched(struct il_priv *il, u32 mask);
 /*
  * Acquire il->lock before calling this function !
  */
-void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 index);
+void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx);
 /**
  * il4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
  * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed

drivers/net/wireless/iwlegacy/iwl-commands.h

@@ -197,7 +197,7 @@ struct il_cmd_header {
 	 *
 	 * The Linux driver uses the following format:
 	 *
-	 *  0:7		tfd index - position within TX queue
+	 *  0:7		tfd idx - position within TX queue
 	 *  8:12	TX queue id
 	 *  13		reserved
 	 *  14		huge - driver sets this to indicate command is in the
@@ -454,7 +454,7 @@ struct il_init_alive_resp {
  *	__le32 log_size;     log capacity (in number of entries)
  *	__le32 type;         (1) timestamp with each entry, (0) no timestamp
  *	__le32 wraps;        # times uCode has wrapped to top of circular buffer
- *      __le32 write_index;  next circular buffer entry that uCode would fill
+ *      __le32 write_idx;  next circular buffer entry that uCode would fill
  *
  *     The header is followed by the circular buffer of log entries.  Entries
  *     with timestamps have the following format:
@@ -901,7 +901,7 @@ struct il_qosparam_cmd {
 #define STA_MODIFY_DELBA_TID_MSK	0x10
 #define STA_MODIFY_SLEEP_TX_COUNT_MSK	0x20
 
-/* Receiver address (actually, Rx station's index into station table),
+/* Receiver address (actually, Rx station's idx into station table),
  * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
 #define BUILD_RAxTID(sta_id, tid)	(((sta_id) << 4) + (tid))
 
@@ -918,12 +918,12 @@ struct il4965_keyinfo {
 /**
  * struct sta_id_modify
  * @addr[ETH_ALEN]: station's MAC address
- * @sta_id: index of station in uCode's station table
+ * @sta_id: idx of station in uCode's station table
  * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
  *
- * Driver selects unused table index when adding new station,
- * or the index to a pre-existing station entry when modifying that station.
- * Some indexes have special purposes (IL_AP_ID, index 0, is for AP).
+ * Driver selects unused table idx when adding new station,
+ * or the idx to a pre-existing station entry when modifying that station.
+ * Some idxes have special purposes (IL_AP_ID, idx 0, is for AP).
  *
  * modify_mask flags select which parameters to modify vs. leave alone.
  */
@@ -959,7 +959,7 @@ struct sta_id_modify {
  *        in the IL_AP_ID entry (1st entry in the table).  BROADCAST and AP
  *        are all that are needed for a BSS client station.  If the device is
  *        used as AP, or in an IBSS network, driver must set up station table
- *        entries for all STAs in network, starting with index IL_STA_ID.
+ *        entries for all STAs in network, starting with idx IL_STA_ID.
  */
 
 struct il3945_addsta_cmd {
@@ -1109,7 +1109,7 @@ struct il_rem_sta_cmd {
  * REPLY_WEP_KEY = 0x20
  */
 struct il_wep_key {
-	u8 key_index;
+	u8 key_idx;
 	u8 key_offset;
 	u8 reserved1[2];
 	u8 key_size;
@@ -1297,7 +1297,7 @@ struct il_rx_mpdu_res_start {
 
 /* For 4965 devices:
  * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
- *    Tx command's initial_rate_index indicates first rate to try;
+ *    Tx command's initial_rate_idx indicates first rate to try;
  *    uCode walks through table for additional Tx attempts.
  * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
  *    This rate will be used for all Tx attempts; it will not be scaled. */
@@ -1499,7 +1499,7 @@ struct il_tx_cmd {
 	 * rate (via non-0 value) for special frames (e.g. management), while
 	 * still supporting rate scaling for all frames.
 	 */
-	u8 initial_rate_index;
+	u8 initial_rate_idx;
 	u8 reserved;
 	u8 key[16];
 	__le16 next_frame_flags;
@@ -1792,7 +1792,7 @@ struct il4965_txpowertable_cmd {
 struct il3945_rate_scaling_info {
 	__le16 rate_n_flags;
 	u8 try_cnt;
-	u8 next_rate_index;
+	u8 next_rate_idx;
 } __packed;
 
 struct il3945_rate_scaling_cmd {
@@ -1825,7 +1825,7 @@ struct il3945_rate_scaling_cmd {
 struct il_link_qual_general_params {
 	u8 flags;
 
-	/* No entries at or above this (driver chosen) index contain MIMO */
+	/* No entries at or above this (driver chosen) idx contain MIMO */
 	u8 mimo_delimiter;
 
 	/* Best single antenna to use for single stream (legacy, SISO). */
@@ -1837,7 +1837,7 @@ struct il_link_qual_general_params {
 	/*
 	 * If driver needs to use different initial rates for different
 	 * EDCA QOS access categories (as implemented by tx fifos 0-3),
-	 * this table will set that up, by indicating the indexes in the
+	 * this table will set that up, by indicating the idxes in the
 	 * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
 	 * Otherwise, driver should set all entries to 0.
 	 *
@@ -1845,7 +1845,7 @@ struct il_link_qual_general_params {
 	 * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
 	 * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
 	 */
-	u8 start_rate_index[LINK_QUAL_AC_NUM];
+	u8 start_rate_idx[LINK_QUAL_AC_NUM];
 } __packed;
 
 #define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000) /* 4 milliseconds */
@@ -2089,8 +2089,8 @@ struct il_link_quality_cmd {
 	struct il_link_qual_agg_params agg_params;
 
 	/*
-	 * Rate info; when using rate-scaling, Tx command's initial_rate_index
-	 * specifies 1st Tx rate attempted, via index into this table.
+	 * Rate info; when using rate-scaling, Tx command's initial_rate_idx
+	 * specifies 1st Tx rate attempted, via idx into this table.
 	 * 4965 devices works its way through table when retrying Tx.
 	 */
 	struct {
@@ -2233,7 +2233,7 @@ enum il_measure_type {
 struct il_spectrum_notification {
 	u8 id;			/* measurement id -- 0 or 1 */
 	u8 token;
-	u8 channel_index;	/* index in measurement channel list */
+	u8 channel_idx;	/* idx in measurement channel list */
 	u8 state;		/* 0 - start, 1 - stop */
 	__le32 start_time;	/* lower 32-bits of TSF */
 	u8 band;		/* 0 - 5.2GHz, 1 - 2.4GHz */
@@ -3220,7 +3220,7 @@ struct il_missed_beacon_notif {
  * Table entries in SENSITIVITY_CMD (struct il_sensitivity_cmd)
  */
 #define HD_TABLE_SIZE  (11)	/* number of entries */
-#define HD_MIN_ENERGY_CCK_DET_IDX                 (0)	/* table indexes */
+#define HD_MIN_ENERGY_CCK_DET_IDX                 (0)	/* table idxes */
 #define HD_MIN_ENERGY_OFDM_DET_IDX                (1)
 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX          (2)
 #define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX      (3)
@@ -3239,13 +3239,13 @@ struct il_missed_beacon_notif {
 /**
  * struct il_sensitivity_cmd
  * @control:  (1) updates working table, (0) updates default table
- * @table:  energy threshold values, use HD_* as index into table
+ * @table:  energy threshold values, use HD_* as idx into table
  *
  * Always use "1" in "control" to update uCode's working table and DSP.
  */
 struct il_sensitivity_cmd {
 	__le16 control;			/* always use "1" */
-	__le16 table[HD_TABLE_SIZE];	/* use HD_* as index */
+	__le16 table[HD_TABLE_SIZE];	/* use HD_* as idx */
 } __packed;
 
 

drivers/net/wireless/iwlegacy/iwl-csr.h

@@ -411,10 +411,10 @@
 #define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
 
 /*
- * Per-Tx-queue write pointer (index, really!)
- * Indicates index to next TFD that driver will fill (1 past latest filled).
+ * Per-Tx-queue write pointer (idx, really!)
+ * Indicates idx to next TFD that driver will fill (1 past latest filled).
  * Bit usage:
- *  0-7:  queue write index
+ *  0-7:  queue write idx
  * 11-8:  queue selector
  */
 #define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)

drivers/net/wireless/iwlegacy/iwl-dev.h

@@ -125,8 +125,8 @@ struct il_cmd_meta {
  */
 struct il_queue {
 	int n_bd;              /* number of BDs in this queue */
-	int write_ptr;       /* 1-st empty entry (index) host_w*/
-	int read_ptr;         /* last used entry (index) host_r*/
+	int write_ptr;       /* 1-st empty entry (idx) host_w*/
+	int read_ptr;         /* last used entry (idx) host_r*/
 	/* use for monitoring and recovering the stuck queue */
 	dma_addr_t dma_addr;   /* physical addr for BD's */
 	int n_win;	       /* safe queue win */
@@ -152,7 +152,7 @@ struct il_tx_info {
  * @dma_addr_cmd: physical address of cmd/tx buffer array
  * @txb: array of per-TFD driver data
  * @time_stamp: time (in jiffies) of last read_ptr change
- * @need_update: indicates need to update read/write index
+ * @need_update: indicates need to update read/write idx
  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
  *
  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
@@ -199,11 +199,11 @@ struct il3945_clip_group {
  * -- hardware capabilities (clip-powers)
  * -- spectrum management
  * -- user preference (e.g. iwconfig)
- * when requested power is set, base power index must also be set. */
+ * when requested power is set, base power idx must also be set. */
 struct il3945_channel_power_info {
 	struct il3945_tx_power tpc;	/* actual radio and DSP gain settings */
-	s8 power_table_index;	/* actual (compenst'd) index into gain table */
-	s8 base_power_index;	/* gain index for power at factory temp. */
+	s8 power_table_idx;	/* actual (compenst'd) idx into gain table */
+	s8 base_power_idx;	/* gain idx for power at factory temp. */
 	s8 requested_power;	/* power (dBm) requested for this chnl/rate */
 };
 
@@ -211,7 +211,7 @@ struct il3945_channel_power_info {
  * channel. */
 struct il3945_scan_power_info {
 	struct il3945_tx_power tpc;	/* actual radio and DSP gain settings */
-	s8 power_table_index;	/* actual (compenst'd) index into gain table */
+	s8 power_table_idx;	/* actual (compenst'd) idx into gain table */
 	s8 requested_power;	/* scan pwr (dBm) requested for chnl/rate */
 };
 
@@ -234,8 +234,8 @@ struct il_channel_info {
 	s8 min_power;	  /* always 0 */
 	s8 scan_power;	  /* (dBm) regul. eeprom, direct scans, any rate */
 
-	u8 group_index;	  /* 0-4, maps channel to group1/2/3/4/5 */
-	u8 band_index;	  /* 0-4, maps channel to band1/2/3/4/5 */
+	u8 group_idx;	  /* 0-4, maps channel to group1/2/3/4/5 */
+	u8 band_idx;	  /* 0-4, maps channel to band1/2/3/4/5 */
 	enum ieee80211_band band;
 
 	/* HT40 channel info */
@@ -245,7 +245,7 @@ struct il_channel_info {
 
 	/* Radio/DSP gain settings for each "normal" data Tx rate.
 	 * These include, in addition to RF and DSP gain, a few fields for
-	 *   remembering/modifying gain settings (indexes). */
+	 *   remembering/modifying gain settings (idxes). */
 	struct il3945_channel_power_info power_info[IL4965_MAX_RATE];
 
 	/* Radio/DSP gain settings for each scan rate, for directed scans. */
@@ -337,12 +337,12 @@ struct il_host_cmd {
  * struct il_rx_queue - Rx queue
  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
  * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
- * @read: Shared index to newest available Rx buffer
- * @write: Shared index to oldest written Rx packet
+ * @read: Shared idx to newest available Rx buffer
+ * @write: Shared idx to oldest written Rx packet
  * @free_count: Number of pre-allocated buffers in rx_free
  * @rx_free: list of free SKBs for use
  * @rx_used: List of Rx buffers with no SKB
- * @need_update: flag to indicate we need to update read/write index
+ * @need_update: flag to indicate we need to update read/write idx
  * @rb_stts: driver's pointer to receive buffer status
  * @rb_stts_dma: bus address of receive buffer status
  *
@@ -636,7 +636,7 @@ static inline int il_queue_used(const struct il_queue *q, int i)
 }
 
 
-static inline u8 il_get_cmd_index(struct il_queue *q, u32 index,
+static inline u8 il_get_cmd_idx(struct il_queue *q, u32 idx,
 								int is_huge)
 {
 	/*
@@ -648,7 +648,7 @@ static inline u8 il_get_cmd_index(struct il_queue *q, u32 index,
 		return q->n_win;	/* must be power of 2 */
 
 	/* Otherwise, use normal size buffers */
-	return index & (q->n_win - 1);
+	return idx & (q->n_win - 1);
 }
 
 
@@ -987,7 +987,7 @@ struct il_priv {
 	struct il_force_reset force_reset;
 
 	/* we allocate array of il_channel_info for NIC's valid channels.
-	 *    Access via channel # using indirect index array */
+	 *    Access via channel # using indirect idx array */
 	struct il_channel_info *channel_info;	/* channel info array */
 	u8 channel_count;	/* # of channels */
 
@@ -1033,7 +1033,7 @@ struct il_priv {
 	struct mac_address addresses[1];
 
 	/* uCode images, save to reload in case of failure */
-	int fw_index;			/* firmware we're trying to load */
+	int fw_idx;			/* firmware we're trying to load */
 	u32 ucode_ver;			/* version of ucode, copy of
 					   il_ucode.ver */
 	struct fw_desc ucode_code;	/* runtime inst */

drivers/net/wireless/iwlegacy/iwl-eeprom.c

@@ -89,7 +89,7 @@
  * During init, we copy the eeprom information and channel map
  * information into il->channel_info_24/52 and il->channel_map_24/52
  *
- * channel_map_24/52 provides the index in the channel_info array for a
+ * channel_map_24/52 provides the idx in the channel_info array for a
  * given channel.  We have to have two separate maps as there is channel
  * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
  * band_2
@@ -267,7 +267,7 @@ EXPORT_SYMBOL(il_eeprom_free);
 static void il_init_band_reference(const struct il_priv *il,
 			int eep_band, int *eeprom_ch_count,
 			const struct il_eeprom_channel **eeprom_ch_info,
-			const u8 **eeprom_ch_index)
+			const u8 **eeprom_ch_idx)
 {
 	u32 offset = il->cfg->ops->lib->
 			eeprom_ops.regulatory_bands[eep_band - 1];
@@ -276,43 +276,43 @@ static void il_init_band_reference(const struct il_priv *il,
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_1);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_1;
+		*eeprom_ch_idx = il_eeprom_band_1;
 		break;
 	case 2:		/* 4.9GHz band */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_2);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_2;
+		*eeprom_ch_idx = il_eeprom_band_2;
 		break;
 	case 3:		/* 5.2GHz band */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_3);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_3;
+		*eeprom_ch_idx = il_eeprom_band_3;
 		break;
 	case 4:		/* 5.5GHz band */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_4);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_4;
+		*eeprom_ch_idx = il_eeprom_band_4;
 		break;
 	case 5:		/* 5.7GHz band */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_5);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_5;
+		*eeprom_ch_idx = il_eeprom_band_5;
 		break;
 	case 6:		/* 2.4GHz ht40 channels */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_6);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_6;
+		*eeprom_ch_idx = il_eeprom_band_6;
 		break;
 	case 7:		/* 5 GHz ht40 channels */
 		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_7);
 		*eeprom_ch_info = (struct il_eeprom_channel *)
 				il_eeprom_query_addr(il, offset);
-		*eeprom_ch_index = il_eeprom_band_7;
+		*eeprom_ch_idx = il_eeprom_band_7;
 		break;
 	default:
 		BUG();
@@ -374,7 +374,7 @@ static int il_mod_ht40_chan_info(struct il_priv *il,
 int il_init_channel_map(struct il_priv *il)
 {
 	int eeprom_ch_count = 0;
-	const u8 *eeprom_ch_index = NULL;
+	const u8 *eeprom_ch_idx = NULL;
 	const struct il_eeprom_channel *eeprom_ch_info = NULL;
 	int band, ch;
 	struct il_channel_info *ch_info;
@@ -412,11 +412,11 @@ int il_init_channel_map(struct il_priv *il)
 	for (band = 1; band <= 5; band++) {
 
 		il_init_band_reference(il, band, &eeprom_ch_count,
-					&eeprom_ch_info, &eeprom_ch_index);
+					&eeprom_ch_info, &eeprom_ch_idx);
 
 		/* Loop through each band adding each of the channels */
 		for (ch = 0; ch < eeprom_ch_count; ch++) {
-			ch_info->channel = eeprom_ch_index[ch];
+			ch_info->channel = eeprom_ch_idx[ch];
 			ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
 			    IEEE80211_BAND_5GHZ;
 
@@ -486,7 +486,7 @@ int il_init_channel_map(struct il_priv *il)
 		enum ieee80211_band ieeeband;
 
 		il_init_band_reference(il, band, &eeprom_ch_count,
-					&eeprom_ch_info, &eeprom_ch_index);
+					&eeprom_ch_info, &eeprom_ch_idx);
 
 		/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
 		ieeeband =
@@ -496,13 +496,13 @@ int il_init_channel_map(struct il_priv *il)
 		for (ch = 0; ch < eeprom_ch_count; ch++) {
 			/* Set up driver's info for lower half */
 			il_mod_ht40_chan_info(il, ieeeband,
-						eeprom_ch_index[ch],
+						eeprom_ch_idx[ch],
 						&eeprom_ch_info[ch],
 						IEEE80211_CHAN_NO_HT40PLUS);
 
 			/* Set up driver's info for upper half */
 			il_mod_ht40_chan_info(il, ieeeband,
-						eeprom_ch_index[ch] + 4,
+						eeprom_ch_idx[ch] + 4,
 						&eeprom_ch_info[ch],
 						IEEE80211_CHAN_NO_HT40MINUS);
 		}

drivers/net/wireless/iwlegacy/iwl-eeprom.h

@@ -153,7 +153,7 @@ extern const u8 il_eeprom_band_1[14];
  *
  * 1)  Temperature (degrees Celsius) of device when measurement was made.
  *
- * 2)  Gain table index used to achieve the target measurement power.
+ * 2)  Gain table idx used to achieve the target measurement power.
  *     This refers to the "well-known" gain tables (see iwl-4965-hw.h).
  *
  * 3)  Actual measured output power, in half-dBm ("34" = 17 dBm).

drivers/net/wireless/iwlegacy/iwl-fh.h

@@ -141,7 +141,7 @@
  *     into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
  *
  * 2)  Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers
- *     (RBs) have been filled, via a "write pointer", actually the index of
+ *     (RBs) have been filled, via a "write pointer", actually the idx of
  *     the RB's corresponding RBD within the circular buffer.  Driver sets
  *     physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
  *
@@ -153,33 +153,33 @@
  *
  * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must
  * enter pointers to these RBs into contiguous RBD circular buffer entries,
- * and update the 4965's "write" index register,
+ * and update the 4965's "write" idx register,
  * FH_RSCSR_CHNL0_RBDCB_WPTR_REG.
  *
- * This "write" index corresponds to the *next* RBD that the driver will make
+ * This "write" idx corresponds to the *next* RBD that the driver will make
  * available, i.e. one RBD past the tail of the ready-to-fill RBDs within
  * the circular buffer.  This value should initially be 0 (before preparing any
  * RBs), should be 8 after preparing the first 8 RBs (for example), and must
  * wrap back to 0 at the end of the circular buffer (but don't wrap before
- * "read" index has advanced past 1!  See below).
+ * "read" idx has advanced past 1!  See below).
  * NOTE:  4965 EXPECTS THE WRITE IDX TO BE INCREMENTED IN MULTIPLES OF 8.
  *
  * As the 4965 fills RBs (referenced from contiguous RBDs within the circular
  * buffer), it updates the Rx status buffer in host DRAM, 2) described above,
- * to tell the driver the index of the latest filled RBD.  The driver must
- * read this "read" index from DRAM after receiving an Rx interrupt from 4965.
+ * to tell the driver the idx of the latest filled RBD.  The driver must
+ * read this "read" idx from DRAM after receiving an Rx interrupt from 4965.
  *
- * The driver must also internally keep track of a third index, which is the
+ * The driver must also internally keep track of a third idx, which is the
  * next RBD to process.  When receiving an Rx interrupt, driver should process
  * all filled but unprocessed RBs up to, but not including, the RB
- * corresponding to the "read" index.  For example, if "read" index becomes "1",
+ * corresponding to the "read" idx.  For example, if "read" idx becomes "1",
  * driver may process the RB pointed to by RBD 0.  Depending on volume of
  * traffic, there may be many RBs to process.
  *
- * If read index == write index, 4965 thinks there is no room to put new data.
+ * If read idx == write idx, 4965 thinks there is no room to put new data.
  * Due to this, the maximum number of filled RBs is 255, instead of 256.  To
  * be safe, make sure that there is a gap of at least 2 RBDs between "write"
- * and "read" indexes; that is, make sure that there are no more than 254
+ * and "read" idxes; that is, make sure that there are no more than 254
  * buffers waiting to be filled.
  */
 #define FH_MEM_RSCSR_LOWER_BOUND	(FH_MEM_LOWER_BOUND + 0xBC0)
@@ -201,7 +201,7 @@
 #define FH_RSCSR_CHNL0_RBDCB_BASE_REG	(FH_MEM_RSCSR_CHNL0 + 0x004)
 
 /**
- * Rx write pointer (index, really!).
+ * Rx write pointer (idx, really!).
  * Bit fields:
  *  11-0:  Index of driver's most recent prepared-to-be-filled RBD, + 1.
  *         NOTE:  For 256-entry circular buffer, use only bits [7:0].
@@ -431,11 +431,11 @@
 /**
  * struct il_rb_status - reseve buffer status
  * 	host memory mapped FH registers
- * @closed_rb_num [0:11] - Indicates the index of the RB which was closed
- * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed
- * @finished_rb_num [0:11] - Indicates the index of the current RB
+ * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed
+ * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed
+ * @finished_rb_num [0:11] - Indicates the idx of the current RB
  * 	in which the last frame was written to
- * @finished_fr_num [0:11] - Indicates the index of the RX Frame
+ * @finished_fr_num [0:11] - Indicates the idx of the RX Frame
  * 	which was transferred
  */
 struct il_rb_status {

drivers/net/wireless/iwlegacy/iwl-helpers.h

@@ -45,23 +45,23 @@ static inline struct ieee80211_conf *il_ieee80211_get_hw_conf(
 }
 
 /**
- * il_queue_inc_wrap - increment queue index, wrap back to beginning
- * @index -- current index
+ * il_queue_inc_wrap - increment queue idx, wrap back to beginning
+ * @idx -- current idx
  * @n_bd -- total number of entries in queue (must be power of 2)
  */
-static inline int il_queue_inc_wrap(int index, int n_bd)
+static inline int il_queue_inc_wrap(int idx, int n_bd)
 {
-	return ++index & (n_bd - 1);
+	return ++idx & (n_bd - 1);
 }
 
 /**
- * il_queue_dec_wrap - decrement queue index, wrap back to end
- * @index -- current index
+ * il_queue_dec_wrap - decrement queue idx, wrap back to end
+ * @idx -- current idx
  * @n_bd -- total number of entries in queue (must be power of 2)
  */
-static inline int il_queue_dec_wrap(int index, int n_bd)
+static inline int il_queue_dec_wrap(int idx, int n_bd)
 {
-	return --index & (n_bd - 1);
+	return --idx & (n_bd - 1);
 }
 
 /* TODO: Move fw_desc functions to iwl-pci.ko */

drivers/net/wireless/iwlegacy/iwl-led.c

@@ -41,7 +41,7 @@
 #include "iwl-core.h"
 #include "iwl-io.h"
 
-/* default: IL_LED_BLINK(0) using blinking index table */
+/* default: IL_LED_BLINK(0) using blinking idx table */
 static int led_mode;
 module_param(led_mode, int, S_IRUGO);
 MODULE_PARM_DESC(led_mode, "0=system default, "

drivers/net/wireless/iwlegacy/iwl-legacy-rs.h

@@ -49,13 +49,13 @@ struct il3945_rate_info {
 	u8 next_rs;		/* next rate used in rs algo */
 	u8 prev_rs_tgg;		/* previous rate used in TGG rs algo */
 	u8 next_rs_tgg;		/* next rate used in TGG rs algo */
-	u8 table_rs_index;	/* index in rate scale table cmd */
+	u8 table_rs_idx;	/* idx in rate scale table cmd */
 	u8 prev_table_rs;	/* prev in rate table cmd */
 };
 
 
 /*
- * These serve as indexes into
+ * These serve as idxes into
  * struct il_rate_info il_rates[RATE_COUNT];
  */
 enum {
@@ -351,7 +351,7 @@ struct il_traffic_load {
  * Pointer to this gets passed back and forth between driver and mac80211.
  */
 struct il_lq_sta {
-	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 active_tbl;		/* idx of active table, range 0-1 */
 	u8 enable_counter;	/* indicates HT mode */
 	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
 	u8 search_better_tbl;	/* 1: currently trying alternate mode */

drivers/net/wireless/iwlegacy/iwl-prph.h

@@ -336,7 +336,7 @@
 
 /*
  * Driver may need to update queue-empty bits after changing queue's
- * write and read pointers (indexes) during (re-)initialization (i.e. when
+ * write and read pointers (idxes) during (re-)initialization (i.e. when
  * scheduler is not tracking what's happening).
  * Bit fields:
  * 31-16:  Write mask -- 1: update empty bit, 0: don't change empty bit
@@ -351,7 +351,7 @@
  * This register points to BC CB for queue 0, must be on 1024-byte boundary.
  * Others are spaced by 1024 bytes.
  * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad.
- * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff).
+ * (Index into a queue's BC CB) = (idx into queue's TFD CB) = (SSN & 0xff).
  * Bit fields:
  * 25-00:  Byte Count CB physical address [35:10], must be 1024-byte aligned.
  */
@@ -366,18 +366,18 @@
  */
 #define IL49_SCD_TXFACT                   (IL49_SCD_START_OFFSET + 0x1c)
 /*
- * Queue (x) Write Pointers (indexes, really!), one for each Tx queue.
+ * Queue (x) Write Pointers (idxes, really!), one for each Tx queue.
  * Initialized and updated by driver as new TFDs are added to queue.
- * NOTE:  If using Block Ack, index must correspond to frame's
- *        Start Sequence Number; index = (SSN & 0xff)
+ * NOTE:  If using Block Ack, idx must correspond to frame's
+ *        Start Sequence Number; idx = (SSN & 0xff)
  * NOTE:  Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses?
  */
 #define IL49_SCD_QUEUE_WRPTR(x)  (IL49_SCD_START_OFFSET + 0x24 + (x) * 4)
 
 /*
- * Queue (x) Read Pointers (indexes, really!), one for each Tx queue.
- * For FIFO mode, index indicates next frame to transmit.
- * For Scheduler-ACK mode, index indicates first frame in Tx win.
+ * Queue (x) Read Pointers (idxes, really!), one for each Tx queue.
+ * For FIFO mode, idx indicates next frame to transmit.
+ * For Scheduler-ACK mode, idx indicates first frame in Tx win.
  * Initialized by driver, updated by scheduler.
  */
 #define IL49_SCD_QUEUE_RDPTR(x)  (IL49_SCD_START_OFFSET + 0x64 + (x) * 4)
@@ -395,7 +395,7 @@
 
 /*
  * Select which queues interrupt driver when scheduler increments
- * a queue's read pointer (index).
+ * a queue's read pointer (idx).
  * Bit fields:
  * 31-16:  Reserved
  * 15-00:  Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled

drivers/net/wireless/iwlegacy/iwl-rx.c

@@ -45,17 +45,17 @@
  * each of which point to Receive Buffers to be filled by the NIC.  These get
  * used not only for Rx frames, but for any command response or notification
  * from the NIC.  The driver and NIC manage the Rx buffers by means
- * of indexes into the circular buffer.
+ * of idxes into the circular buffer.
  *
  * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
+ * The host/firmware share two idx registers for managing the Rx buffers.
  *
- * The READ index maps to the first position that the firmware may be writing
+ * The READ idx maps to the first position that the firmware may be writing
  * to -- the driver can read up to (but not including) this position and get
  * good data.
- * The READ index is managed by the firmware once the card is enabled.
+ * The READ idx is managed by the firmware once the card is enabled.
  *
- * The WRITE index maps to the last position the driver has read from -- the
+ * The WRITE idx maps to the last position the driver has read from -- the
  * position preceding WRITE is the last slot the firmware can place a packet.
  *
  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
@@ -64,9 +64,9 @@
  * During initialization, the host sets up the READ queue position to the first
  * IDX position, and WRITE to the last (READ - 1 wrapped)
  *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt.  The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt.  The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
  * resets the Rx queue buffers with new memory.
  *
  * The management in the driver is as follows:
@@ -75,9 +75,9 @@
  *   to replenish the iwl->rxq->rx_free.
  * + In il_rx_replenish (scheduled) if 'processed' != 'read' then the
  *   iwl->rxq is replenished and the READ IDX is updated (updating the
- *   'processed' and 'read' driver indexes as well)
+ *   'processed' and 'read' driver idxes as well)
  * + A received packet is processed and handed to the kernel network stack,
- *   detached from the iwl->rxq.  The driver 'processed' index is updated.
+ *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
  * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
  *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
  *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
@@ -91,7 +91,7 @@
  *                            il_rx_queue_restock
  * il_rx_queue_restock() Moves available buffers from rx_free into Rx
  *                            queue, updates firmware pointers, and updates
- *                            the WRITE index.  If insufficient rx_free buffers
+ *                            the WRITE idx.  If insufficient rx_free buffers
  *                            are available, schedules il_rx_replenish
  *
  * -- enable interrupts --

drivers/net/wireless/iwlegacy/iwl-sta.c

@@ -174,7 +174,7 @@ int il_send_add_sta(struct il_priv *il,
 }
 EXPORT_SYMBOL(il_send_add_sta);
 
-static void il_set_ht_add_station(struct il_priv *il, u8 index,
+static void il_set_ht_add_station(struct il_priv *il, u8 idx,
 				   struct ieee80211_sta *sta,
 				   struct il_rxon_context *ctx)
 {
@@ -192,7 +192,7 @@ static void il_set_ht_add_station(struct il_priv *il, u8 index,
 			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
 			"dynamic" : "disabled");
 
-	sta_flags = il->stations[index].sta.station_flags;
+	sta_flags = il->stations[idx].sta.station_flags;
 
 	sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
 
@@ -221,7 +221,7 @@ static void il_set_ht_add_station(struct il_priv *il, u8 index,
 	else
 		sta_flags &= ~STA_FLG_HT40_EN_MSK;
 
-	il->stations[index].sta.station_flags = sta_flags;
+	il->stations[idx].sta.station_flags = sta_flags;
  done:
 	return;
 }
@@ -649,7 +649,7 @@ il_restore_stations(struct il_priv *il, struct il_rxon_context *ctx)
 }
 EXPORT_SYMBOL(il_restore_stations);
 
-int il_get_free_ucode_key_index(struct il_priv *il)
+int il_get_free_ucode_key_idx(struct il_priv *il)
 {
 	int i;
 
@@ -659,7 +659,7 @@ int il_get_free_ucode_key_index(struct il_priv *il)
 
 	return WEP_INVALID_OFFSET;
 }
-EXPORT_SYMBOL(il_get_free_ucode_key_index);
+EXPORT_SYMBOL(il_get_free_ucode_key_idx);
 
 void il_dealloc_bcast_stations(struct il_priv *il)
 {
@@ -692,7 +692,7 @@ static void il_dump_lq_cmd(struct il_priv *il,
 		       lq->general_params.dual_stream_ant_msk);
 
 	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
-		D_RATE("lq index %d 0x%X\n",
+		D_RATE("lq idx %d 0x%X\n",
 			       i, lq->rs_table[i].rate_n_flags);
 }
 #else
@@ -728,7 +728,7 @@ static bool il_is_lq_table_valid(struct il_priv *il,
 		if (le32_to_cpu(lq->rs_table[i].rate_n_flags) &
 						RATE_MCS_HT_MSK) {
 			D_INFO(
-				       "index %d of LQ expects HT channel\n",
+				       "idx %d of LQ expects HT channel\n",
 				       i);
 			return false;
 		}

drivers/net/wireless/iwlegacy/iwl-sta.h

@@ -48,7 +48,7 @@ void il_restore_stations(struct il_priv *il,
 void il_clear_ucode_stations(struct il_priv *il,
 			      struct il_rxon_context *ctx);
 void il_dealloc_bcast_stations(struct il_priv *il);
-int il_get_free_ucode_key_index(struct il_priv *il);
+int il_get_free_ucode_key_idx(struct il_priv *il);
 int il_send_add_sta(struct il_priv *il,
 			struct il_addsta_cmd *sta, u8 flags);
 int il_add_station_common(struct il_priv *il,

drivers/net/wireless/iwlegacy/iwl-tx.c

@@ -39,7 +39,7 @@
 #include "iwl-helpers.h"
 
 /**
- * il_txq_update_write_ptr - Send new write index to hardware
+ * il_txq_update_write_ptr - Send new write idx to hardware
  */
 void
 il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq)
@@ -152,7 +152,7 @@ void il_cmd_queue_unmap(struct il_priv *il)
 		return;
 
 	while (q->read_ptr != q->write_ptr) {
-		i = il_get_cmd_index(q, q->read_ptr, 0);
+		i = il_get_cmd_idx(q, q->read_ptr, 0);
 
 		if (txq->meta[i].flags & CMD_MAPPED) {
 			pci_unmap_single(il->pci_dev,
@@ -254,7 +254,7 @@ EXPORT_SYMBOL(il_queue_space);
 
 
 /**
- * il_queue_init - Initialize queue's high/low-water and read/write indexes
+ * il_queue_init - Initialize queue's high/low-water and read/write idxes
  */
 static int il_queue_init(struct il_priv *il, struct il_queue *q,
 			  int count, int slots_num, u32 id)
@@ -268,7 +268,7 @@ static int il_queue_init(struct il_priv *il, struct il_queue *q,
 	BUG_ON(!is_power_of_2(count));
 
 	/* slots_num must be power-of-two size, otherwise
-	 * il_get_cmd_index is broken. */
+	 * il_get_cmd_idx is broken. */
 	BUG_ON(!is_power_of_2(slots_num));
 
 	q->low_mark = q->n_win / 4;
@@ -385,7 +385,7 @@ int il_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq,
 	 * il_queue_inc_wrap and il_queue_dec_wrap are broken. */
 	BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
 
-	/* Initialize queue's high/low-water marks, and head/tail indexes */
+	/* Initialize queue's high/low-water marks, and head/tail idxes */
 	il_queue_init(il, &txq->q,
 				TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
 
@@ -416,7 +416,7 @@ void il_tx_queue_reset(struct il_priv *il, struct il_tx_queue *txq,
 
 	txq->need_update = 0;
 
-	/* Initialize queue's high/low-water marks, and head/tail indexes */
+	/* Initialize queue's high/low-water marks, and head/tail idxes */
 	il_queue_init(il, &txq->q,
 				TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
 
@@ -433,7 +433,7 @@ EXPORT_SYMBOL(il_tx_queue_reset);
  * @cmd: a point to the ucode command structure
  *
  * The function returns < 0 values to indicate the operation is
- * failed. On success, it turns the index (> 0) of command in the
+ * failed. On success, it turns the idx (> 0) of command in the
  * command queue.
  */
 int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
@@ -476,7 +476,7 @@ int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
 		return -ENOSPC;
 	}
 
-	idx = il_get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
+	idx = il_get_cmd_idx(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
 	out_cmd = txq->cmd[idx];
 	out_meta = &txq->meta[idx];
 
@@ -543,7 +543,7 @@ int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
 						   phys_addr, fix_size, 1,
 						   U32_PAD(cmd->len));
 
-	/* Increment and update queue's write index */
+	/* Increment and update queue's write idx */
 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
 	il_txq_update_write_ptr(il, txq);
 
@@ -554,7 +554,7 @@ int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
 /**
  * il_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd
  *
- * When FW advances 'R' index, all entries between old and new 'R' index
+ * When FW advances 'R' idx, all entries between old and new 'R' idx
  * need to be reclaimed. As result, some free space forms.  If there is
  * enough free space (> low mark), wake the stack that feeds us.
  */
@@ -566,7 +566,7 @@ static void il_hcmd_queue_reclaim(struct il_priv *il, int txq_id,
 	int nfreed = 0;
 
 	if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
-		IL_ERR("Read index for DMA queue txq id (%d), index %d, "
+		IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
 			  "is out of range [0-%d] %d %d.\n", txq_id,
 			  idx, q->n_bd, q->write_ptr, q->read_ptr);
 		return;
@@ -576,7 +576,7 @@ static void il_hcmd_queue_reclaim(struct il_priv *il, int txq_id,
 	     q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
 		if (nfreed++ > 0) {
-			IL_ERR("HCMD skipped: index (%d) %d %d\n", idx,
+			IL_ERR("HCMD skipped: idx (%d) %d %d\n", idx,
 					q->write_ptr, q->read_ptr);
 			queue_work(il->workqueue, &il->restart);
 		}
@@ -598,8 +598,8 @@ il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
 	struct il_rx_pkt *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
-	int index = SEQ_TO_IDX(sequence);
-	int cmd_index;
+	int idx = SEQ_TO_IDX(sequence);
+	int cmd_idx;
 	bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
 	struct il_device_cmd *cmd;
 	struct il_cmd_meta *meta;
@@ -618,9 +618,9 @@ il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
 		return;
 	}
 
-	cmd_index = il_get_cmd_index(&txq->q, index, huge);
-	cmd = txq->cmd[cmd_index];
-	meta = &txq->meta[cmd_index];
+	cmd_idx = il_get_cmd_idx(&txq->q, idx, huge);
+	cmd = txq->cmd[cmd_idx];
+	meta = &txq->meta[cmd_idx];
 
 	txq->time_stamp = jiffies;
 
@@ -638,7 +638,7 @@ il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
 
 	spin_lock_irqsave(&il->hcmd_lock, flags);
 
-	il_hcmd_queue_reclaim(il, txq_id, index, cmd_index);
+	il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx);
 
 	if (!(meta->flags & CMD_ASYNC)) {
 		clear_bit(STATUS_HCMD_ACTIVE, &il->status);

drivers/net/wireless/iwlegacy/iwl3945-base.c

@@ -163,7 +163,7 @@ static int il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
 	if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
 		il->stations[sta_id].sta.key.key_offset =
-				 il_get_free_ucode_key_index(il);
+				 il_get_free_ucode_key_idx(il);
 	/* else, we are overriding an existing key => no need to allocated room
 	* in uCode. */
 
@@ -513,7 +513,7 @@ static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
 
 	hdr_len = ieee80211_hdrlen(fc);
 
-	/* Find index into station table for destination station */
+	/* Find idx into station table for destination station */
 	sta_id = il_sta_id_or_broadcast(
 			il, &il->ctx,
 			info->control.sta);
@@ -541,7 +541,7 @@ static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
 
 	spin_lock_irqsave(&il->lock, flags);
 
-	idx = il_get_cmd_index(q, q->write_ptr, 0);
+	idx = il_get_cmd_idx(q, q->write_ptr, 0);
 
 	/* Set up driver data for this TFD */
 	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct il_tx_info));
@@ -557,7 +557,7 @@ static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
 
 	/*
 	 * Set up the Tx-command (not MAC!) header.
-	 * Store the chosen Tx queue and TFD index within the sequence field;
+	 * Store the chosen Tx queue and TFD idx within the sequence field;
 	 * after Tx, uCode's Tx response will return this value so driver can
 	 * locate the frame within the tx queue and do post-tx processing.
 	 */
@@ -641,7 +641,7 @@ static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
 	}
 
 
-	/* Tell device the write index *just past* this latest filled TFD */
+	/* Tell device the write idx *just past* this latest filled TFD */
 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
 	il_txq_update_write_ptr(il, txq);
 	spin_unlock_irqrestore(&il->lock, flags);
@@ -889,14 +889,14 @@ static void il3945_setup_rx_handlers(struct il_priv *il)
  * 0 to 31
  *
  * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
+ * The host/firmware share two idx registers for managing the Rx buffers.
  *
- * The READ index maps to the first position that the firmware may be writing
+ * The READ idx maps to the first position that the firmware may be writing
  * to -- the driver can read up to (but not including) this position and get
  * good data.
- * The READ index is managed by the firmware once the card is enabled.
+ * The READ idx is managed by the firmware once the card is enabled.
  *
- * The WRITE index maps to the last position the driver has read from -- the
+ * The WRITE idx maps to the last position the driver has read from -- the
  * position preceding WRITE is the last slot the firmware can place a packet.
  *
  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
@@ -905,9 +905,9 @@ static void il3945_setup_rx_handlers(struct il_priv *il)
  * During initialization, the host sets up the READ queue position to the first
  * IDX position, and WRITE to the last (READ - 1 wrapped)
  *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt.  The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt.  The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
  * resets the Rx queue buffers with new memory.
  *
  * The management in the driver is as follows:
@@ -916,9 +916,9 @@ static void il3945_setup_rx_handlers(struct il_priv *il)
  *   to replenish the iwl->rxq->rx_free.
  * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
  *   iwl->rxq is replenished and the READ IDX is updated (updating the
- *   'processed' and 'read' driver indexes as well)
+ *   'processed' and 'read' driver idxes as well)
  * + A received packet is processed and handed to the kernel network stack,
- *   detached from the iwl->rxq.  The driver 'processed' index is updated.
+ *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
  * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
  *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
  *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
@@ -931,7 +931,7 @@ static void il3945_setup_rx_handlers(struct il_priv *il)
  *                            il3945_rx_queue_restock
  * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
  *                            queue, updates firmware pointers, and updates
- *                            the WRITE index.  If insufficient rx_free buffers
+ *                            the WRITE idx.  If insufficient rx_free buffers
  *                            are available, schedules il3945_rx_replenish
  *
  * -- enable interrupts --
@@ -960,7 +960,7 @@ static inline __le32 il3945_dma_addr2rbd_ptr(struct il_priv *il,
  * and we have free pre-allocated buffers, fill the ranks as much
  * as we can, pulling from rx_free.
  *
- * This moves the 'write' index forward to catch up with 'processed', and
+ * This moves the 'write' idx forward to catch up with 'processed', and
  * also updates the memory address in the firmware to reference the new
  * target buffer.
  */
@@ -1211,7 +1211,7 @@ static void il3945_rx_handle(struct il_priv *il)
 	u32 count = 8;
 	int total_empty = 0;
 
-	/* uCode's read index (stored in shared DRAM) indicates the last Rx
+	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 	i = rxq->read;
@@ -1656,7 +1656,7 @@ static void il3945_init_hw_rates(struct il_priv *il,
 
 	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
 		rates[i].bitrate = il3945_rates[i].ieee * 5;
-		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value = i; /* Rate scaling will work on idxes */
 		rates[i].hw_value_short = i;
 		rates[i].flags = 0;
 		if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
@@ -1850,7 +1850,7 @@ IL3945_UCODE_GET(boot_size);
 static int il3945_read_ucode(struct il_priv *il)
 {
 	const struct il_ucode_header *ucode;
-	int ret = -EINVAL, index;
+	int ret = -EINVAL, idx;
 	const struct firmware *ucode_raw;
 	/* firmware file name contains uCode/driver compatibility version */
 	const char *name_pre = il->cfg->fw_name_pre;
@@ -1863,8 +1863,8 @@ static int il3945_read_ucode(struct il_priv *il)
 
 	/* Ask kernel firmware_class module to get the boot firmware off disk.
 	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
+	for (idx = api_max; idx >= api_min; idx--) {
+		sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
 		ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
 		if (ret < 0) {
 			IL_ERR("%s firmware file req failed: %d\n",
@@ -1874,7 +1874,7 @@ static int il3945_read_ucode(struct il_priv *il)
 			else
 				goto error;
 		} else {
-			if (index < api_max)
+			if (idx < api_max)
 				IL_ERR("Loaded firmware %s, "
 					"which is deprecated. "
 					" Please use API v%u instead.\n",

drivers/net/wireless/iwlegacy/iwl4965-base.c

@@ -173,7 +173,7 @@ static void il4965_set_beacon_tim(struct il_priv *il,
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
 
 	/*
-	 * The index is relative to frame start but we start looking at the
+	 * The idx is relative to frame start but we start looking at the
 	 * variable-length part of the beacon.
 	 */
 	tim_idx = mgmt->u.beacon.variable - beacon;
@@ -318,7 +318,7 @@ static inline u8 il4965_tfd_get_num_tbs(struct il_tfd *tfd)
  * @il - driver ilate data
  * @txq - tx queue
  *
- * Does NOT advance any TFD circular buffer read/write indexes
+ * Does NOT advance any TFD circular buffer read/write idxes
  * Does NOT free the TFD itself (which is within circular buffer)
  */
 void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
@@ -326,11 +326,11 @@ void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
 	struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
 	struct il_tfd *tfd;
 	struct pci_dev *dev = il->pci_dev;
-	int index = txq->q.read_ptr;
+	int idx = txq->q.read_ptr;
 	int i;
 	int num_tbs;
 
-	tfd = &tfd_tmp[index];
+	tfd = &tfd_tmp[idx];
 
 	/* Sanity check on number of chunks */
 	num_tbs = il4965_tfd_get_num_tbs(tfd);
@@ -344,8 +344,8 @@ void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
 	/* Unmap tx_cmd */
 	if (num_tbs)
 		pci_unmap_single(dev,
-				dma_unmap_addr(&txq->meta[index], mapping),
-				dma_unmap_len(&txq->meta[index], len),
+				dma_unmap_addr(&txq->meta[idx], mapping),
+				dma_unmap_len(&txq->meta[idx], len),
 				PCI_DMA_BIDIRECTIONAL);
 
 	/* Unmap chunks, if any. */
@@ -643,7 +643,7 @@ void il4965_rx_handle(struct il_priv *il)
 	u32 count = 8;
 	int total_empty;
 
-	/* uCode's read index (stored in shared DRAM) indicates the last Rx
+	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 	i = rxq->read;
@@ -1106,14 +1106,14 @@ static int __must_check il4965_request_firmware(struct il_priv *il, bool first)
 	char tag[8];
 
 	if (first) {
-		il->fw_index = il->cfg->ucode_api_max;
-		sprintf(tag, "%d", il->fw_index);
+		il->fw_idx = il->cfg->ucode_api_max;
+		sprintf(tag, "%d", il->fw_idx);
 	} else {
-		il->fw_index--;
-		sprintf(tag, "%d", il->fw_index);
+		il->fw_idx--;
+		sprintf(tag, "%d", il->fw_idx);
 	}
 
-	if (il->fw_index < il->cfg->ucode_api_min) {
+	if (il->fw_idx < il->cfg->ucode_api_min) {
 		IL_ERR("no suitable firmware found!\n");
 		return -ENOENT;
 	}
@@ -1213,7 +1213,7 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
 	memset(&pieces, 0, sizeof(pieces));
 
 	if (!ucode_raw) {
-		if (il->fw_index <= il->cfg->ucode_api_max)
+		if (il->fw_idx <= il->cfg->ucode_api_max)
 			IL_ERR(
 				"request for firmware file '%s' failed.\n",
 				il->firmware_name);
@@ -1655,7 +1655,7 @@ static int il4965_alive_notify(struct il_priv *il)
 	/* Initialize each Tx queue (including the command queue) */
 	for (i = 0; i < il->hw_params.max_txq_num; i++) {
 
-		/* TFD circular buffer read/write indexes */
+		/* TFD circular buffer read/write idxes */
 		il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
 		il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
 
@@ -2713,7 +2713,7 @@ static void il4965_init_hw_rates(struct il_priv *il,
 
 	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
 		rates[i].bitrate = il_rates[i].ieee * 5;
-		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value = i; /* Rate scaling will work on idxes */
 		rates[i].hw_value_short = i;
 		rates[i].flags = 0;
 		if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
@@ -2729,11 +2729,11 @@ static void il4965_init_hw_rates(struct il_priv *il,
 /*
  * Acquire il->lock before calling this function !
  */
-void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 index)
+void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
 {
 	il_wr(il, HBUS_TARG_WRPTR,
-			     (index & 0xff) | (txq_id << 8));
-	il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), index);
+			     (idx & 0xff) | (txq_id << 8));
+	il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
 }
 
 void il4965_tx_queue_set_status(struct il_priv *il,