Merge remote-tracking branch 'airlied/drm-next' into HEAD

Backmerge drm-next because the conflict between Ander's atomic fixes
for 4.2 and Maartens future work are getting to unwielding to handle.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_ringbuffer.h

Just always take ours, same as git merge -X ours, but done by hand
because I didn't trust git: It's confusing that it doesn't show any
conflicts in the merge diff at all.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Documentation/DocBook/drm.tmpl

@@ -2585,7 +2585,22 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="36" valign="top" >DRM</td>
+	<td rowspan="37" valign="top" >DRM</td>
+	<td valign="top" >Generic</td>
+	<td valign="top" >“rotation”</td>
+	<td valign="top" >BITMASK</td>
+	<td valign="top" >{ 0, "rotate-0" },
+	{ 1, "rotate-90" },
+	{ 2, "rotate-180" },
+	{ 3, "rotate-270" },
+	{ 4, "reflect-x" },
+	{ 5, "reflect-y" }</td>
+	<td valign="top" >CRTC, Plane</td>
+	<td valign="top" >rotate-(degrees) rotates the image by the specified amount in degrees
+	in counter clockwise direction. reflect-x and reflect-y reflects the
+	image along the specified axis prior to rotation</td>
+	</tr>
+	<tr>
 	<td rowspan="5" valign="top" >Connector</td>
 	<td valign="top" >“EDID”</td>
 	<td valign="top" >BLOB | IMMUTABLE</td>
@@ -2846,7 +2861,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >i915</td>
+	<td rowspan="20" valign="top" >i915</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
@@ -2862,14 +2877,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="1" valign="top" >Plane</td>
-	<td valign="top" >“rotation”</td>
-	<td valign="top" >BITMASK</td>
-	<td valign="top" >{ 0, "rotate-0" }, { 2, "rotate-180" }</td>
-	<td valign="top" >Plane</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
@@ -3377,19 +3384,7 @@ void intel_crt_init(struct drm_device *dev)
 	</tr>
 	<tr>
 	<td rowspan="2" valign="top" >omap</td>
-	<td rowspan="2" valign="top" >Generic</td>
-	<td valign="top" >“rotation”</td>
-	<td valign="top" >BITMASK</td>
-	<td valign="top" >{ 0, "rotate-0" },
-	{ 1, "rotate-90" },
-	{ 2, "rotate-180" },
-	{ 3, "rotate-270" },
-	{ 4, "reflect-x" },
-	{ 5, "reflect-y" }</td>
-	<td valign="top" >CRTC, Plane</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
+	<td valign="top" >Generic</td>
 	<td valign="top" >“zorder”</td>
 	<td valign="top" >RANGE</td>
 	<td valign="top" >Min=0, Max=3</td>

Documentation/devicetree/bindings/drm/msm/dsi.txt

+Qualcomm Technologies Inc. adreno/snapdragon DSI output
+
+DSI Controller:
+Required properties:
+- compatible:
+  * "qcom,mdss-dsi-ctrl"
+- reg: Physical base address and length of the registers of controller
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_ctrl"
+- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
+  be 0 or 1, since we have 2 DSI controllers at most for now.
+- interrupts: The interrupt signal from the DSI block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "bus_clk"
+  * "byte_clk"
+  * "core_clk"
+  * "core_mmss_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+- vdd-supply: phandle to vdd regulator device node
+- vddio-supply: phandle to vdd-io regulator device node
+- vdda-supply: phandle to vdda regulator device node
+- qcom,dsi-phy: phandle to DSI PHY device node
+
+Optional properties:
+- panel@0: Node of panel connected to this DSI controller.
+  See files in Documentation/devicetree/bindings/panel/ for each supported
+  panel.
+- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+  driving a panel which needs 2 DSI links.
+- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+  the master link of the 2-DSI panel.
+- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+  driving a 2-DSI panel whose 2 links need receive command simultaneously.
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+DSI PHY:
+Required properties:
+- compatible: Could be the following
+  * "qcom,dsi-phy-28nm-hpm"
+  * "qcom,dsi-phy-28nm-lp"
+- reg: Physical base address and length of the registers of PLL, PHY and PHY
+  regulator
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_regulator"
+- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
+  be 0 or 1, since we have 2 DSI PHYs at most for now.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "iface_clk"
+- vddio-supply: phandle to vdd-io regulator device node
+
+Example:
+	mdss_dsi0: qcom,mdss_dsi@fd922800 {
+		compatible = "qcom,mdss-dsi-ctrl";
+		qcom,dsi-host-index = <0>;
+		interrupt-parent = <&mdss_mdp>;
+		interrupts = <4 0>;
+		reg-names = "dsi_ctrl";
+		reg = <0xfd922800 0x200>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names =
+			"bus_clk",
+			"byte_clk",
+			"core_clk",
+			"core_mmss_clk",
+			"iface_clk",
+			"mdp_core_clk",
+			"pixel_clk";
+		clocks =
+			<&mmcc MDSS_AXI_CLK>,
+			<&mmcc MDSS_BYTE0_CLK>,
+			<&mmcc MDSS_ESC0_CLK>,
+			<&mmcc MMSS_MISC_AHB_CLK>,
+			<&mmcc MDSS_AHB_CLK>,
+			<&mmcc MDSS_MDP_CLK>,
+			<&mmcc MDSS_PCLK0_CLK>;
+		vdda-supply = <&pma8084_l2>;
+		vdd-supply = <&pma8084_l22>;
+		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy = <&mdss_dsi_phy0>;
+
+		qcom,dual-panel-mode;
+		qcom,master-panel;
+		qcom,sync-dual-panel;
+
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
+		compatible = "qcom,dsi-phy-28nm-hpm";
+		qcom,dsi-phy-index = <0>;
+		reg-names =
+			"dsi_pll",
+			"dsi_phy",
+			"dsi_phy_regulator";
+		reg =   <0xfd922a00 0xd4>,
+			<0xfd922b00 0x2b0>,
+			<0xfd922d80 0x7b>;
+		clock-names = "iface_clk";
+		clocks = <&mmcc MDSS_AHB_CLK>;
+		vddio-supply = <&pma8084_l12>;
+	};

Documentation/devicetree/bindings/drm/msm/edp.txt

+Qualcomm Technologies Inc. adreno/snapdragon eDP output
+
+Required properties:
+- compatible:
+  * "qcom,mdss-edp"
+- reg: Physical base address and length of the registers of controller and PLL
+- reg-names: The names of register regions. The following regions are required:
+  * "edp"
+  * "pll_base"
+- interrupts: The interrupt signal from the eDP block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+  * "link_clk"
+- #clock-cells: The value should be 1.
+- vdda-supply: phandle to vdda regulator device node
+- lvl-vdd-supply: phandle to regulator device node which is used to supply power
+  to HPD receiving chip
+- panel-en-gpios: GPIO pin to supply power to panel.
+- panel-hpd-gpios: GPIO pin used for eDP hpd.
+
+
+Optional properties:
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+Example:
+	mdss_edp: qcom,mdss_edp@fd923400 {
+			compatible = "qcom,mdss-edp";
+			reg-names =
+				"edp",
+				"pll_base";
+			reg =	<0xfd923400 0x700>,
+				<0xfd923a00 0xd4>;
+			interrupt-parent = <&mdss_mdp>;
+			interrupts = <12 0>;
+			power-domains = <&mmcc MDSS_GDSC>;
+			clock-names =
+				"core_clk",
+				"pixel_clk",
+				"iface_clk",
+				"link_clk",
+				"mdp_core_clk";
+			clocks =
+				<&mmcc MDSS_EDPAUX_CLK>,
+				<&mmcc MDSS_EDPPIXEL_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_EDPLINK_CLK>,
+				<&mmcc MDSS_MDP_CLK>;
+			#clock-cells = <1>;
+			vdda-supply = <&pma8084_l12>;
+			lvl-vdd-supply = <&lvl_vreg>;
+			panel-en-gpios = <&tlmm 137 0>;
+			panel-hpd-gpios = <&tlmm 103 0>;
+	};

Documentation/devicetree/bindings/drm/msm/hdmi.txt

@@ -20,6 +20,9 @@ Required properties:
 Optional properties:
 - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
 - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-1: the "sleep" pinctrl state
 
 Example:
 
@@ -44,5 +47,8 @@ Example:
 		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
 		core-vdda-supply = <&pm8921_hdmi_mvs>;
 		hdmi-mux-supply = <&ext_3p3v>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
 	};
 };

Documentation/devicetree/bindings/panel/hannstar,hsd100pxn1.txt

+HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+
+Required properties:
+- compatible: should be "hannstar,hsd100pxn1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/lg,lb070wv8.txt

+LG 7" (800x480 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lb070wv8"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/video/exynos-mic.txt

+Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
+
+MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
+not capable to transfer high resoltuion frame data as decon can send. MIC
+solves this problem by compressing the frame data by 1/2 before it is
+transferred through mipi dsi. The compressed frame data must be uncompressed in
+the panel PCB.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-mic".
+- reg: physical base address and length of the MIC registers set and system
+       register of mic.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
+- samsung,disp-syscon: the reference node for syscon for DISP block.
+- ports: contains a port which is connected to decon node and dsi node.
+	 address-cells and size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the
+	decon node or dsi node. The reg value must be 0 and 1 respectively.
+
+Example:
+SoC specific DT entry:
+mic: mic@13930000 {
+	compatible = "samsung,exynos5433-mic";
+	reg = <0x13930000 0x48>;
+	clocks = <&cmu_disp CLK_PCLK_MIC0>,
+	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+	samsung,disp-syscon = <&syscon_disp>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mic_to_decon: endpoint {
+				remote-endpoint = <&decon_to_mic>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mic_to_dsi: endpoint {
+				remote-endpoint = <&dsi_to_mic>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/video/exynos5433-decon.txt

+Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-decon";
+- reg: physical base address and length of the DECON registers set.
+- interrupts: should contain a list of all DECON IP block interrupts in the
+	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
+	      depends on the interrupt controller used.
+- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
+		   in the same order as they were listed in the interrupts
+		   property.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
+	       "sclk_decon_eclk"
+- ports: contains a port which is connected to mic node. address-cells and
+	 size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the mic
+	node. The reg value muset be 0.
+- i80-if-timings: specify whether the panel which is connected to decon uses
+		  i80 lcd interface or mipi video interface. This node contains
+		  no timing information as that of fimd does. Because there is
+		  no register in decon to specify i80 interface timing value,
+		  it is not needed, but make it remain to use same kind of node
+		  in fimd and exynos7 decon.
+
+Example:
+SoC specific DT entry:
+decon: decon@13800000 {
+	compatible = "samsung,exynos5433-decon";
+	reg = <0x13800000 0x2104>;
+	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_SCLK_DECON_VCLK>,
+		<&cmu_disp CLK_SCLK_DECON_ECLK>;
+	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
+		"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
+	interrupt-names = "vsync", "lcd_sys";
+	interrupts = <0 202 0>, <0 203 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			decon_to_mic: endpoint {
+				remote-endpoint = <&mic_to_decon>;
+			};
+		};
+	};
+};
+
+Board specific DT entry:
+&decon {
+	i80-if-timings {
+	};
+};

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -6,17 +6,19 @@ Required properties:
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
 		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
     entry in clock-names
-  - clock-names: should include "bus_clk"and "pll_clk" entries
+  - clock-names: should include "bus_clk"and "sclk_mipi" entries
+		 the use of "pll_clk" is deprecated
   - phys: list of phy specifiers, must contain an entry for each required
     entry in phy-names
   - phy-names: should include "dsim" entry
   - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
   - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
   - #address-cells, #size-cells: should be set respectively to <1> and <0>
     according to DSI host bindings (see MIPI DSI bindings [1])
 
@@ -30,10 +32,19 @@ Video interfaces:
   Device node can contain video interface port nodes according to [2].
   The following are properties specific to those nodes:
 
-  port node:
-    - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+  port node inbound:
+    - reg: (required) must be 0.
+  port node outbound:
+    - reg: (required) must be 1.
 
-  endpoint node of DSI port (reg = 1):
+  endpoint node connected from mic node (reg = 0):
+    - remote-endpoint: specifies the endpoint in mic node. This node is required
+		       for Exynos5433 mipi dsi. So mic can access to panel node
+		       thoughout this dsi node.
+  endpoint node connected to panel node (reg = 1):
+    - remote-endpoint: specifies the endpoint in panel node. This node is
+		       required in all kinds of exynos mipi dsi to represent
+		       the connection between mipi dsi and panel.
     - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
       mode
     - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
@@ -48,7 +59,7 @@ Example:
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
 		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "pll_clk";
+		clock-names = "bus_clk", "sclk_mipi";
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
@@ -72,7 +83,15 @@ Example:
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			port@0 {
+				reg = <0>;
+				decon_to_mic: endpoint {
+					remote-endpoint = <&mic_to_decon>;
+				};
+			};
+
 			port@1 {
+				reg = <1>;
 				dsi_ep: endpoint {
 					reg = <0>;
 					samsung,burst-clock-frequency = <500000000>;

arch/arm/boot/dts/exynos4.dtsi

@@ -167,7 +167,7 @@
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "pll_clk";
+		clock-names = "bus_clk", "sclk_mipi";
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;

drivers/gpu/drm/Kconfig

@@ -120,6 +120,27 @@ config DRM_RADEON
 
 source "drivers/gpu/drm/radeon/Kconfig"
 
+config DRM_AMDGPU
+	tristate "AMD GPU"
+	depends on DRM && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FW_LOADER
+        select DRM_KMS_HELPER
+	select DRM_KMS_FB_HELPER
+        select DRM_TTM
+	select POWER_SUPPLY
+	select HWMON
+	select BACKLIGHT_CLASS_DEVICE
+	select INTERVAL_TREE
+	help
+	  Choose this option if you have a recent AMD Radeon graphics card.
+
+	  If M is selected, the module will be called amdgpu.
+
+source "drivers/gpu/drm/amd/amdgpu/Kconfig"
+
 source "drivers/gpu/drm/nouveau/Kconfig"
 
 config DRM_I810

drivers/gpu/drm/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_DRM_TDFX)	+= tdfx/
 obj-$(CONFIG_DRM_R128)	+= r128/
 obj-$(CONFIG_HSA_AMD) += amd/amdkfd/
 obj-$(CONFIG_DRM_RADEON)+= radeon/
+obj-$(CONFIG_DRM_AMDGPU)+= amd/amdgpu/
 obj-$(CONFIG_DRM_MGA)	+= mga/
 obj-$(CONFIG_DRM_I810)	+= i810/
 obj-$(CONFIG_DRM_I915)  += i915/

drivers/gpu/drm/amd/amdgpu/Kconfig

+config DRM_AMDGPU_CIK
+	bool "Enable amdgpu support for CIK parts"
+	depends on DRM_AMDGPU
+	help
+	  Choose this option if you want to enable experimental support
+	  for CIK asics.
+
+	  CIK is already supported in radeon.  CIK support in amdgpu
+	  is for experimentation and testing.
+
+config DRM_AMDGPU_USERPTR
+	bool "Always enable userptr write support"
+	depends on DRM_AMDGPU
+	select MMU_NOTIFIER
+	help
+	  This option selects CONFIG_MMU_NOTIFIER if it isn't already
+	  selected to enabled full userptr support.

drivers/gpu/drm/amd/amdgpu/Makefile

+#
+# Makefile for the drm device driver.  This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/amd/include/asic_reg \
+	-Idrivers/gpu/drm/amd/include
+
+amdgpu-y := amdgpu_drv.o
+
+# add KMS driver
+amdgpu-y += amdgpu_device.o amdgpu_kms.o \
+	amdgpu_atombios.o atombios_crtc.o amdgpu_connectors.o \
+	atom.o amdgpu_fence.o amdgpu_ttm.o amdgpu_object.o amdgpu_gart.o \
+	amdgpu_encoders.o amdgpu_display.o amdgpu_i2c.o \
+	amdgpu_fb.o amdgpu_gem.o amdgpu_ring.o \
+	amdgpu_cs.o amdgpu_bios.o amdgpu_benchmark.o amdgpu_test.o \
+	amdgpu_pm.o atombios_dp.o amdgpu_afmt.o amdgpu_trace_points.o \
+	atombios_encoders.o amdgpu_semaphore.o amdgpu_sa.o atombios_i2c.o \
+	amdgpu_prime.o amdgpu_vm.o amdgpu_ib.o amdgpu_pll.o \
+	amdgpu_ucode.o amdgpu_bo_list.o amdgpu_ctx.o amdgpu_sync.o
+
+# add asic specific block
+amdgpu-$(CONFIG_DRM_AMDGPU_CIK)+= cik.o gmc_v7_0.o cik_ih.o kv_smc.o kv_dpm.o \
+	ci_smc.o ci_dpm.o dce_v8_0.o gfx_v7_0.o cik_sdma.o uvd_v4_2.o vce_v2_0.o
+
+amdgpu-y += \
+	vi.o
+
+# add GMC block
+amdgpu-y += \
+	gmc_v8_0.o
+
+# add IH block
+amdgpu-y += \
+	amdgpu_irq.o \
+	amdgpu_ih.o \
+	iceland_ih.o \
+	tonga_ih.o \
+	cz_ih.o
+
+# add SMC block
+amdgpu-y += \
+	amdgpu_dpm.o \
+	cz_smc.o cz_dpm.o \
+	tonga_smc.o tonga_dpm.o \
+	iceland_smc.o iceland_dpm.o
+
+# add DCE block
+amdgpu-y += \
+	dce_v10_0.o \
+	dce_v11_0.o
+
+# add GFX block
+amdgpu-y += \
+	amdgpu_gfx.o \
+	gfx_v8_0.o
+
+# add async DMA block
+amdgpu-y += \
+	sdma_v2_4.o \
+	sdma_v3_0.o
+
+# add UVD block
+amdgpu-y += \
+	amdgpu_uvd.o \
+	uvd_v5_0.o \
+	uvd_v6_0.o
+
+# add VCE block
+amdgpu-y += \
+	amdgpu_vce.o \
+	vce_v3_0.o
+
+amdgpu-$(CONFIG_COMPAT) += amdgpu_ioc32.o
+amdgpu-$(CONFIG_VGA_SWITCHEROO) += amdgpu_atpx_handler.o
+amdgpu-$(CONFIG_ACPI) += amdgpu_acpi.o
+amdgpu-$(CONFIG_MMU_NOTIFIER) += amdgpu_mn.o
+
+obj-$(CONFIG_DRM_AMDGPU)+= amdgpu.o
+
+CFLAGS_amdgpu_trace_points.o := -I$(src)

drivers/gpu/drm/amd/amdgpu/amdgpu_afmt.c

+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Christian König.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Christian König
+ */
+#include <linux/hdmi.h>
+#include <linux/gcd.h>
+#include <drm/drmP.h>
+#include <drm/amdgpu_drm.h>
+#include "amdgpu.h"
+
+static const struct amdgpu_afmt_acr amdgpu_afmt_predefined_acr[] = {
+    /*	     32kHz	  44.1kHz	48kHz    */
+    /* Clock      N     CTS      N     CTS      N     CTS */
+    {  25175,  4096,  25175, 28224, 125875,  6144,  25175 }, /*  25,20/1.001 MHz */
+    {  25200,  4096,  25200,  6272,  28000,  6144,  25200 }, /*  25.20       MHz */
+    {  27000,  4096,  27000,  6272,  30000,  6144,  27000 }, /*  27.00       MHz */
+    {  27027,  4096,  27027,  6272,  30030,  6144,  27027 }, /*  27.00*1.001 MHz */
+    {  54000,  4096,  54000,  6272,  60000,  6144,  54000 }, /*  54.00       MHz */
+    {  54054,  4096,  54054,  6272,  60060,  6144,  54054 }, /*  54.00*1.001 MHz */
+    {  74176,  4096,  74176,  5733,  75335,  6144,  74176 }, /*  74.25/1.001 MHz */
+    {  74250,  4096,  74250,  6272,  82500,  6144,  74250 }, /*  74.25       MHz */
+    { 148352,  4096, 148352,  5733, 150670,  6144, 148352 }, /* 148.50/1.001 MHz */
+    { 148500,  4096, 148500,  6272, 165000,  6144, 148500 }, /* 148.50       MHz */
+};
+
+
+/*
+ * calculate CTS and N values if they are not found in the table
+ */
+static void amdgpu_afmt_calc_cts(uint32_t clock, int *CTS, int *N, int freq)
+{
+	int n, cts;
+	unsigned long div, mul;
+
+	/* Safe, but overly large values */
+	n = 128 * freq;
+	cts = clock * 1000;
+
+	/* Smallest valid fraction */
+	div = gcd(n, cts);
+
+	n /= div;
+	cts /= div;
+
+	/*
+	 * The optimal N is 128*freq/1000. Calculate the closest larger
+	 * value that doesn't truncate any bits.
+	 */
+	mul = ((128*freq/1000) + (n-1))/n;
+
+	n *= mul;
+	cts *= mul;
+
+	/* Check that we are in spec (not always possible) */
+	if (n < (128*freq/1500))
+		printk(KERN_WARNING "Calculated ACR N value is too small. You may experience audio problems.\n");
+	if (n > (128*freq/300))
+		printk(KERN_WARNING "Calculated ACR N value is too large. You may experience audio problems.\n");
+
+	*N = n;
+	*CTS = cts;
+
+	DRM_DEBUG("Calculated ACR timing N=%d CTS=%d for frequency %d\n",
+		  *N, *CTS, freq);
+}
+
+struct amdgpu_afmt_acr amdgpu_afmt_acr(uint32_t clock)
+{
+	struct amdgpu_afmt_acr res;
+	u8 i;
+
+	/* Precalculated values for common clocks */
+	for (i = 0; i < ARRAY_SIZE(amdgpu_afmt_predefined_acr); i++) {
+		if (amdgpu_afmt_predefined_acr[i].clock == clock)
+			return amdgpu_afmt_predefined_acr[i];
+	}
+
+	/* And odd clocks get manually calculated */
+	amdgpu_afmt_calc_cts(clock, &res.cts_32khz, &res.n_32khz, 32000);
+	amdgpu_afmt_calc_cts(clock, &res.cts_44_1khz, &res.n_44_1khz, 44100);
+	amdgpu_afmt_calc_cts(clock, &res.cts_48khz, &res.n_48khz, 48000);
+
+	return res;
+}

drivers/gpu/drm/amd/amdgpu/amdgpu_trace_points.c

+/* Copyright Red Hat Inc 2010.
+ * Author : Dave Airlie <airlied@redhat.com>
+ */
+#include <drm/drmP.h>
+#include <drm/amdgpu_drm.h>
+#include "amdgpu.h"
+
+#define CREATE_TRACE_POINTS
+#include "amdgpu_trace.h"