提交 0aaffa9b 编写于 作者: J Johannes Berg 提交者: John W. Linville

mac80211: improve HT channel handling

Currently, when one interface switches HT mode,
all others will follow along. This is clearly
undesirable, since the new one might switch to
no-HT while another one is operating in HT.

Address this issue by keeping track of the HT
mode per interface, and allowing only changes
that are compatible, i.e. switching into HT40+
is not possible when another interface is in
HT40-, in that case the second one needs to
fall back to HT20.

Also, to allow drivers to know what's going on,
store the per-interface HT mode (channel type)
in the virtual interface's bss_conf.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 f444de05
......@@ -651,17 +651,17 @@ static void mac80211_hwsim_beacon(unsigned long arg)
add_timer(&data->beacon_timer);
}
static const char *hwsim_chantypes[] = {
[NL80211_CHAN_NO_HT] = "noht",
[NL80211_CHAN_HT20] = "ht20",
[NL80211_CHAN_HT40MINUS] = "ht40-",
[NL80211_CHAN_HT40PLUS] = "ht40+",
};
static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
{
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
static const char *chantypes[4] = {
[NL80211_CHAN_NO_HT] = "noht",
[NL80211_CHAN_HT20] = "ht20",
[NL80211_CHAN_HT40MINUS] = "ht40-",
[NL80211_CHAN_HT40PLUS] = "ht40+",
};
static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
[IEEE80211_SMPS_AUTOMATIC] = "auto",
[IEEE80211_SMPS_OFF] = "off",
......@@ -672,7 +672,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
wiphy_name(hw->wiphy), __func__,
conf->channel->center_freq,
chantypes[conf->channel_type],
hwsim_chantypes[conf->channel_type],
!!(conf->flags & IEEE80211_CONF_IDLE),
!!(conf->flags & IEEE80211_CONF_PS),
smps_modes[conf->smps_mode]);
......@@ -760,9 +760,10 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
}
if (changed & BSS_CHANGED_HT) {
printk(KERN_DEBUG " %s: HT: op_mode=0x%x\n",
printk(KERN_DEBUG " %s: HT: op_mode=0x%x, chantype=%s\n",
wiphy_name(hw->wiphy),
info->ht_operation_mode);
info->ht_operation_mode,
hwsim_chantypes[info->channel_type]);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
......
......@@ -191,6 +191,9 @@ enum ieee80211_bss_change {
* the current band.
* @bssid: The BSSID for this BSS
* @enable_beacon: whether beaconing should be enabled or not
* @channel_type: Channel type for this BSS -- the hardware might be
* configured for HT40+ while this BSS only uses no-HT, for
* example.
* @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
* This field is only valid when the channel type is one of the HT types.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
......@@ -215,6 +218,7 @@ struct ieee80211_bss_conf {
u16 ht_operation_mode;
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
enum nl80211_channel_type channel_type;
};
/**
......
......@@ -1166,23 +1166,34 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = NULL;
if (netdev)
sdata = IEEE80211_DEV_TO_SUB_IF(netdev);
switch (ieee80211_get_channel_mode(local, NULL)) {
case CHAN_MODE_HOPPING:
return -EBUSY;
case CHAN_MODE_FIXED:
if (local->oper_channel == chan &&
local->oper_channel_type == channel_type)
if (local->oper_channel != chan)
return -EBUSY;
if (!sdata && local->_oper_channel_type == channel_type)
return 0;
return -EBUSY;
break;
case CHAN_MODE_UNDEFINED:
break;
}
local->oper_channel = chan;
local->oper_channel_type = channel_type;
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!ieee80211_set_channel_type(local, sdata, channel_type))
return -EBUSY;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
return 0;
}
#ifdef CONFIG_PM
......@@ -1406,7 +1417,7 @@ int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
* association, there's no need to send an action frame.
*/
if (!sdata->u.mgd.associated ||
sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) {
sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) {
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_smps(sdata->local, sdata);
mutex_unlock(&sdata->local->iflist_mtx);
......
......@@ -2,6 +2,7 @@
* mac80211 - channel management
*/
#include <linux/nl80211.h>
#include "ieee80211_i.h"
enum ieee80211_chan_mode
......@@ -55,3 +56,72 @@ ieee80211_get_channel_mode(struct ieee80211_local *local,
return mode;
}
bool ieee80211_set_channel_type(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
enum nl80211_channel_type chantype)
{
struct ieee80211_sub_if_data *tmp;
enum nl80211_channel_type superchan = NL80211_CHAN_NO_HT;
bool result;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(tmp, &local->interfaces, list) {
if (tmp == sdata)
continue;
if (!ieee80211_sdata_running(tmp))
continue;
switch (tmp->vif.bss_conf.channel_type) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
superchan = tmp->vif.bss_conf.channel_type;
break;
case NL80211_CHAN_HT40PLUS:
WARN_ON(superchan == NL80211_CHAN_HT40MINUS);
superchan = NL80211_CHAN_HT40PLUS;
break;
case NL80211_CHAN_HT40MINUS:
WARN_ON(superchan == NL80211_CHAN_HT40PLUS);
superchan = NL80211_CHAN_HT40MINUS;
break;
}
}
switch (superchan) {
case NL80211_CHAN_NO_HT:
case NL80211_CHAN_HT20:
/*
* allow any change that doesn't go to no-HT
* (if it already is no-HT no change is needed)
*/
if (chantype == NL80211_CHAN_NO_HT)
break;
superchan = chantype;
break;
case NL80211_CHAN_HT40PLUS:
case NL80211_CHAN_HT40MINUS:
/* allow smaller bandwidth and same */
if (chantype == NL80211_CHAN_NO_HT)
break;
if (chantype == NL80211_CHAN_HT20)
break;
if (superchan == chantype)
break;
result = false;
goto out;
}
local->_oper_channel_type = superchan;
if (sdata)
sdata->vif.bss_conf.channel_type = chantype;
result = true;
out:
mutex_unlock(&local->iflist_mtx);
return result;
}
......@@ -102,7 +102,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sband = local->hw.wiphy->bands[chan->band];
......@@ -910,7 +910,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
/* fix ourselves to that channel now already */
if (params->channel_fixed) {
sdata->local->oper_channel = params->channel;
sdata->local->oper_channel_type = NL80211_CHAN_NO_HT;
WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
NL80211_CHAN_NO_HT));
}
if (params->ie) {
......
......@@ -768,7 +768,7 @@ struct ieee80211_local {
enum mac80211_scan_state next_scan_state;
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
enum nl80211_channel_type oper_channel_type;
enum nl80211_channel_type _oper_channel_type;
struct ieee80211_channel *oper_channel, *csa_channel;
/* Temporary remain-on-channel for off-channel operations */
......@@ -1239,6 +1239,9 @@ enum ieee80211_chan_mode {
enum ieee80211_chan_mode
ieee80211_get_channel_mode(struct ieee80211_local *local,
struct ieee80211_sub_if_data *ignore);
bool ieee80211_set_channel_type(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
enum nl80211_channel_type chantype);
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
......
......@@ -111,7 +111,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
channel_type = local->oper_channel_type;
channel_type = local->_oper_channel_type;
}
if (chan != local->hw.conf.channel ||
......
......@@ -136,11 +136,14 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta;
u32 changed = 0;
u16 ht_opmode;
bool enable_ht = true, ht_changed;
bool enable_ht = true;
enum nl80211_channel_type prev_chantype;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
prev_chantype = sdata->vif.bss_conf.channel_type;
/* HT is not supported */
if (!sband->ht_cap.ht_supported)
enable_ht = false;
......@@ -171,38 +174,37 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
}
}
ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
channel_type != local->hw.conf.channel_type;
if (local->tmp_channel)
local->tmp_channel_type = channel_type;
local->oper_channel_type = channel_type;
if (ht_changed) {
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
/* can only fail due to HT40+/- mismatch */
channel_type = NL80211_CHAN_HT20;
WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
}
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
if (prev_chantype != channel_type) {
rcu_read_lock();
sta = sta_info_get(sdata, bssid);
if (sta)
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_HT_CHANGED,
local->oper_channel_type);
channel_type);
rcu_read_unlock();
}
/* disable HT */
if (!enable_ht)
return 0;
}
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
if (!sdata->ht_opmode_valid ||
sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
if (sdata->ht_opmode_valid != enable_ht ||
sdata->vif.bss_conf.ht_operation_mode != ht_opmode ||
prev_chantype != channel_type) {
changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
sdata->ht_opmode_valid = true;
sdata->ht_opmode_valid = enable_ht;
}
return changed;
......@@ -865,7 +867,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ieee80211_set_wmm_default(sdata);
/* channel(_type) changes are handled by ieee80211_hw_config */
local->oper_channel_type = NL80211_CHAN_NO_HT;
WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
/* on the next assoc, re-program HT parameters */
sdata->ht_opmode_valid = false;
......@@ -882,8 +884,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ieee80211_hw_config(local, config_changed);
/* And the BSSID changed -- not very interesting here */
changed |= BSS_CHANGED_BSSID;
/* The BSSID (not really interesting) and HT changed */
changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
ieee80211_bss_info_change_notify(sdata, changed);
if (remove_sta)
......@@ -2265,7 +2267,7 @@ int ieee80211_mgd_action(struct ieee80211_sub_if_data *sdata,
if ((chan != local->tmp_channel ||
channel_type != local->tmp_channel_type) &&
(chan != local->oper_channel ||
channel_type != local->oper_channel_type))
channel_type != local->_oper_channel_type))
return -EBUSY;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + len);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册