USB: Add ADU support for Ontrak ADU devices

This patch adds support for Ontrak ADU USB devices.

Fixed for printk issues by Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NSteven Haigh <netwiz@crc.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Documentation/devices.txt

@@ -2543,6 +2543,9 @@ Your cooperation is appreciated.
 		 64 = /dev/usb/rio500	Diamond Rio 500
 		 65 = /dev/usb/usblcd	USBLCD Interface (info@usblcd.de)
 		 66 = /dev/usb/cpad0	Synaptics cPad (mouse/LCD)
+		 67 = /dev/usb/adutux0	1st Ontrak ADU device
+		    ...
+		 76 = /dev/usb/adutux10	10th Ontrak ADU device
 		 96 = /dev/usb/hiddev0	1st USB HID device
 		    ...
 		111 = /dev/usb/hiddev15	16th USB HID device

drivers/usb/Makefile

@@ -63,6 +63,7 @@ obj-$(CONFIG_USB_USS720)	+= misc/
 obj-$(CONFIG_USB_PHIDGETSERVO)	+= misc/
 obj-$(CONFIG_USB_SISUSBVGA)	+= misc/
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= misc/
+obj-$(CONFIG_USB_ADUTUX)	+= misc/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/

drivers/usb/input/hid-core.c

@@ -1697,7 +1697,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },

drivers/usb/misc/Kconfig

@@ -32,6 +32,16 @@ config USB_EMI26
 	  To compile this driver as a module, choose M here: the
 	  module will be called emi26.
 
+config USB_ADUTUX
+	tristate "ADU devices from Ontrak Control Systems (EXPERIMENTAL)"
+	depends on USB && EXPERIMENTAL
+	help
+	  Say Y if you want to use an ADU device from Ontrak Control
+	  Systems.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called adutux.
+
 config USB_AUERSWALD
 	tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
 	depends on USB && EXPERIMENTAL

drivers/usb/misc/Makefile

@@ -3,6 +3,7 @@
 # (the ones that don't fit into any other categories)
 #
 
+obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o