提交 00236aed 编写于 作者: J Juuso Oikarinen 提交者: John W. Linville

wl1271: Add support for connection quality monitoring

This patch will add support for connection quality monitoring by configuring
rssi triggers to the firmware, and enabling the firmware rssi trigger
functionality.
Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e1972818
......@@ -473,6 +473,9 @@ struct wl1271 {
/* in dBm */
int power_level;
int rssi_thold;
int last_rssi_event;
struct wl1271_stats stats;
struct wl1271_debugfs debugfs;
......
......@@ -1165,6 +1165,7 @@ int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable)
kfree(acx);
return ret;
}
int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid)
{
struct wl1271_acx_keep_alive_config *acx = NULL;
......@@ -1194,3 +1195,73 @@ int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid)
kfree(acx);
return ret;
}
int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
s16 thold, u8 hyst)
{
struct wl1271_acx_rssi_snr_trigger *acx = NULL;
int ret = 0;
wl1271_debug(DEBUG_ACX, "acx rssi snr trigger");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
wl->last_rssi_event = -1;
acx->pacing = cpu_to_le16(wl->conf.roam_trigger.trigger_pacing);
acx->metric = WL1271_ACX_TRIG_METRIC_RSSI_BEACON;
acx->type = WL1271_ACX_TRIG_TYPE_EDGE;
if (enable)
acx->enable = WL1271_ACX_TRIG_ENABLE;
else
acx->enable = WL1271_ACX_TRIG_DISABLE;
acx->index = WL1271_ACX_TRIG_IDX_RSSI;
acx->dir = WL1271_ACX_TRIG_DIR_BIDIR;
acx->threshold = cpu_to_le16(thold);
acx->hysteresis = hyst;
ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_TRIGGER, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx rssi snr trigger setting failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl)
{
struct wl1271_acx_rssi_snr_avg_weights *acx = NULL;
struct conf_roam_trigger_settings *c = &wl->conf.roam_trigger;
int ret = 0;
wl1271_debug(DEBUG_ACX, "acx rssi snr avg weights");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->rssi_beacon = c->avg_weight_rssi_beacon;
acx->rssi_data = c->avg_weight_rssi_data;
acx->snr_beacon = c->avg_weight_snr_beacon;
acx->snr_data = c->avg_weight_snr_data;
ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_WEIGHTS, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx rssi snr trigger weights failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
......@@ -942,6 +942,57 @@ struct wl1271_acx_keep_alive_config {
u8 padding;
} __attribute__ ((packed));
enum {
WL1271_ACX_TRIG_TYPE_LEVEL = 0,
WL1271_ACX_TRIG_TYPE_EDGE,
};
enum {
WL1271_ACX_TRIG_DIR_LOW = 0,
WL1271_ACX_TRIG_DIR_HIGH,
WL1271_ACX_TRIG_DIR_BIDIR,
};
enum {
WL1271_ACX_TRIG_ENABLE = 1,
WL1271_ACX_TRIG_DISABLE,
};
enum {
WL1271_ACX_TRIG_METRIC_RSSI_BEACON = 0,
WL1271_ACX_TRIG_METRIC_RSSI_DATA,
WL1271_ACX_TRIG_METRIC_SNR_BEACON,
WL1271_ACX_TRIG_METRIC_SNR_DATA,
};
enum {
WL1271_ACX_TRIG_IDX_RSSI = 0,
WL1271_ACX_TRIG_COUNT = 8,
};
struct wl1271_acx_rssi_snr_trigger {
struct acx_header header;
__le16 threshold;
__le16 pacing; /* 0 - 60000 ms */
u8 metric;
u8 type;
u8 dir;
u8 hysteresis;
u8 index;
u8 enable;
u8 padding[2];
};
struct wl1271_acx_rssi_snr_avg_weights {
struct acx_header header;
u8 rssi_beacon;
u8 rssi_data;
u8 snr_beacon;
u8 snr_data;
};
enum {
ACX_WAKE_UP_CONDITIONS = 0x0002,
ACX_MEM_CFG = 0x0003,
......@@ -990,7 +1041,7 @@ enum {
ACX_FRAG_CFG = 0x004F,
ACX_BET_ENABLE = 0x0050,
ACX_RSSI_SNR_TRIGGER = 0x0051,
ACX_RSSI_SNR_WEIGHTS = 0x0051,
ACX_RSSI_SNR_WEIGHTS = 0x0052,
ACX_KEEP_ALIVE_MODE = 0x0053,
ACX_SET_KEEP_ALIVE_CONFIG = 0x0054,
ACX_BA_SESSION_RESPONDER_POLICY = 0x0055,
......@@ -1060,5 +1111,8 @@ int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
int wl1271_acx_pm_config(struct wl1271 *wl);
int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable);
int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
s16 thold, u8 hyst);
int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
#endif /* __WL1271_ACX_H__ */
......@@ -412,7 +412,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
SCAN_COMPLETE_EVENT_ID |
PS_REPORT_EVENT_ID |
JOIN_EVENT_COMPLETE_ID |
DISCONNECT_EVENT_COMPLETE_ID;
DISCONNECT_EVENT_COMPLETE_ID |
RSSI_SNR_TRIGGER_0_EVENT_ID;
ret = wl1271_event_unmask(wl);
if (ret < 0) {
......
......@@ -756,65 +756,6 @@ enum {
CONF_TRIG_EVENT_DIR_BIDIR
};
struct conf_sig_trigger {
/*
* The RSSI / SNR threshold value.
*
* FIXME: what is the range?
*/
s16 threshold;
/*
* Minimum delay between two trigger events for this trigger in ms.
*
* Range: 0 - 60000
*/
u16 pacing;
/*
* The measurement data source for this trigger.
*
* Range: CONF_TRIG_METRIC_*
*/
u8 metric;
/*
* The trigger type of this trigger.
*
* Range: CONF_TRIG_EVENT_TYPE_*
*/
u8 type;
/*
* The direction of the trigger.
*
* Range: CONF_TRIG_EVENT_DIR_*
*/
u8 direction;
/*
* Hysteresis range of the trigger around the threshold (in dB)
*
* Range: u8
*/
u8 hysteresis;
/*
* Index of the trigger rule.
*
* Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1
*/
u8 index;
/*
* Enable / disable this rule (to use for clearing rules.)
*
* Range: 1 - Enabled, 2 - Not enabled
*/
u8 enable;
};
struct conf_sig_weights {
/*
......@@ -932,12 +873,6 @@ struct conf_conn_settings {
*/
u8 ps_poll_threshold;
/*
* Configuration of signal (rssi/snr) triggers.
*/
u8 sig_trigger_count;
struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS];
/*
* Configuration of signal average weights.
*/
......@@ -1045,6 +980,43 @@ struct conf_pm_config_settings {
bool host_fast_wakeup_support;
};
struct conf_roam_trigger_settings {
/*
* The minimum interval between two trigger events.
*
* Range: 0 - 60000 ms
*/
u16 trigger_pacing;
/*
* The weight for rssi/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_beacon;
/*
* The weight for rssi/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_data;
/*
* The weight for snr/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_beacon;
/*
* The weight for snr/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_data;
};
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
......@@ -1053,6 +1025,7 @@ struct conf_drv_settings {
struct conf_init_settings init;
struct conf_itrim_settings itrim;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
};
#endif
......@@ -125,6 +125,24 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
return ret;
}
static void wl1271_event_rssi_trigger(struct wl1271 *wl,
struct event_mailbox *mbox)
{
enum nl80211_cqm_rssi_threshold_event event;
s8 metric = mbox->rssi_snr_trigger_metric[0];
wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric);
if (metric <= wl->rssi_thold)
event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
else
event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
if (event != wl->last_rssi_event)
ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL);
wl->last_rssi_event = event;
}
static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
{
wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
......@@ -173,6 +191,12 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
return ret;
}
if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
if (wl->vif)
wl1271_event_rssi_trigger(wl, mbox);
}
if (wl->vif && beacon_loss)
ieee80211_connection_loss(wl->vif);
......
......@@ -38,6 +38,14 @@
*/
enum {
RSSI_SNR_TRIGGER_0_EVENT_ID = BIT(0),
RSSI_SNR_TRIGGER_1_EVENT_ID = BIT(1),
RSSI_SNR_TRIGGER_2_EVENT_ID = BIT(2),
RSSI_SNR_TRIGGER_3_EVENT_ID = BIT(3),
RSSI_SNR_TRIGGER_4_EVENT_ID = BIT(4),
RSSI_SNR_TRIGGER_5_EVENT_ID = BIT(5),
RSSI_SNR_TRIGGER_6_EVENT_ID = BIT(6),
RSSI_SNR_TRIGGER_7_EVENT_ID = BIT(7),
MEASUREMENT_START_EVENT_ID = BIT(8),
MEASUREMENT_COMPLETE_EVENT_ID = BIT(9),
SCAN_COMPLETE_EVENT_ID = BIT(10),
......
......@@ -352,6 +352,11 @@ int wl1271_hw_init(struct wl1271 *wl)
if (ret < 0)
goto out_free_memmap;
/* Configure rssi/snr averaging weights */
ret = wl1271_acx_rssi_snr_avg_weights(wl);
if (ret < 0)
goto out_free_memmap;
return 0;
out_free_memmap:
......
......@@ -234,35 +234,6 @@ static struct conf_drv_settings default_conf = {
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
.ps_poll_threshold = 20,
.sig_trigger_count = 2,
.sig_trigger = {
[0] = {
.threshold = -75,
.pacing = 500,
.metric = CONF_TRIG_METRIC_RSSI_BEACON,
.type = CONF_TRIG_EVENT_TYPE_EDGE,
.direction = CONF_TRIG_EVENT_DIR_LOW,
.hysteresis = 2,
.index = 0,
.enable = 1
},
[1] = {
.threshold = -75,
.pacing = 500,
.metric = CONF_TRIG_METRIC_RSSI_BEACON,
.type = CONF_TRIG_EVENT_TYPE_EDGE,
.direction = CONF_TRIG_EVENT_DIR_HIGH,
.hysteresis = 2,
.index = 1,
.enable = 1
}
},
.sig_weights = {
.rssi_bcn_avg_weight = 10,
.rssi_pkt_avg_weight = 10,
.snr_bcn_avg_weight = 10,
.snr_pkt_avg_weight = 10
},
.bet_enable = CONF_BET_MODE_ENABLE,
.bet_max_consecutive = 10,
.psm_entry_retries = 3,
......@@ -281,6 +252,14 @@ static struct conf_drv_settings default_conf = {
.pm_config = {
.host_clk_settling_time = 5000,
.host_fast_wakeup_support = false
},
.roam_trigger = {
/* FIXME: due to firmware bug, must use value 1 for now */
.trigger_pacing = 1,
.avg_weight_rssi_beacon = 20,
.avg_weight_rssi_data = 10,
.avg_weight_snr_beacon = 20,
.avg_weight_snr_data = 10
}
};
......@@ -1703,6 +1682,18 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
do_join = true;
}
if (changed & BSS_CHANGED_CQM) {
bool enable = false;
if (bss_conf->cqm_rssi_thold)
enable = true;
ret = wl1271_acx_rssi_snr_trigger(wl, enable,
bss_conf->cqm_rssi_thold,
bss_conf->cqm_rssi_hyst);
if (ret < 0)
goto out;
wl->rssi_thold = bss_conf->cqm_rssi_thold;
}
if ((changed & BSS_CHANGED_BSSID) &&
/*
* Now we know the correct bssid, so we send a new join command
......@@ -2283,7 +2274,8 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_UAPSD |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_CONNECTION_MONITOR;
IEEE80211_HW_CONNECTION_MONITOR |
IEEE80211_HW_SUPPORTS_CQM_RSSI;
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册