* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md

* [renesas/drv_wdt.c] Fix error code issues
[renesas/drv_i2c.c] add hardware i2c driver

* [update] drv_wdt.c,drv_i2c.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

增加1170系列SDRAM时钟配置
修复sdram中memheap自动初始化时机错误导致被assert的情况
Co-authored-by: Meco Man <920369182@qq.com>

* Update Kconfig

增加RT1170双路网络选项

* Update SConscript

增加RTL8211F驱动选项支持

* Update SConstruct

去掉外设目录

* Add files via upload

增加PHY芯片RTL8211F驱动

* Update drv_rtl8211f.c

* format code
Co-authored-by: Meco Man <920369182@qq.com>

report in slack group

 - in _can_int_tx if can driver sendmsg do not return RT_EOK,
   it will repeat until sendmsg return RT_EOK
 - if error occur on can bus(wire broken or EMI), all threads that
   have lower priority will not be executed
 - we should let application layer to determine if resend is appropriate
   when send fail, besides in data link layer, can already implemented
   auto resend in hardware

* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: NFan YANG <fan.yang@hpmicro.com>

* update
Signed-off-by: NFan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>

华芯微特SWM341芯片的bsp支持包
* 修改dac.c函数名称错误
* delete swm320-lq100 bsp
* 修复sdio读写块的地址偏移问题
* add synwit swm341 bsp
* 修复gcc下启动文件错误
* 为测试用例添加说明

clean_invalid must be set at the same time, and call
clean_invalid, or call clean/invalid

report in #4184

Co-authored-by: Nxinyi.gao <xinyi.gao@nxp.com>

Some users' computer cannot find the path of VS and will cause failure. Just skip this step.

* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes

* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566

this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).

- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.

* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

append some information about menuconfig -s

fixed py2 <==> py3 ValueError : unsupported pickle protocol: x

英飞凌 CY8CKIT-062S2-43012 BSP

add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver

https://club.rt-thread.org/ask/question/32d3a440402902f7.html

按照pinout布局图重新设计Arduino引脚布局和功能
- 目前PB0（D12, PWM）和PA15（D5，PWM）测试不通过
参考：https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716

attach #6229

Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.

* [fix] the risk for function exit() when open pthread support.
* [update] modify annotation from "user data" to "pthread_data".

* 优化imxrt的BSP下面的applications的Sconsript脚本

* add import os for sconscript in imxrt

* Use FreeRTOS wrapper

* Add console driver

* Add patch, .config. Update readme.

* Change date