- 08 8月, 2022 5 次提交
-
-
由 liYang~ 提交于
按照pinout布局图重新设计Arduino引脚布局和功能 - 目前PB0(D12, PWM)和PA15(D5,PWM)测试不通过 参考:https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716
-
由 mysterywolf 提交于
attach #6229
-
由 Isaac Rose 提交于
Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.
-
由 xiangxistu 提交于
* [fix] the risk for function exit() when open pthread support. * [update] modify annotation from "user data" to "pthread_data".
-
由 xfwangqiang 提交于
* 优化imxrt的BSP下面的applications的Sconsript脚本 * add import os for sconscript in imxrt
-
- 06 8月, 2022 1 次提交
-
-
由 tangzz98 提交于
* Use FreeRTOS wrapper * Add console driver * Add patch, .config. Update readme. * Change date
-
- 05 8月, 2022 2 次提交
-
-
由 liYang~ 提交于
* 对接RTdunio
-
- 04 8月, 2022 7 次提交
-
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 Thomas_Fly 提交于
* [document] Fix the doxygen file
-
由 StackRyan 提交于
[fix]mimxrt1170 Qspi flash bootup problems by loss of external flash conf and ivt header. [add]green light instead printf on main.c.
-
由 HubretXie 提交于
* [kernel][timer] fixed bug serial_v2 驱动问题,导致所有写入都使用阻塞方式写入
-
由 xiangxistu 提交于
-
- 03 8月, 2022 4 次提交
-
-
由 mysterywolf 提交于
* [simulator] fix some warnings comes from https://github.com/RT-Thread/rt-thread/pull/5791 * [simulator] update kconfig Co-authored-by: Nguozhanxin <guozhanxin@rt-thread.com>
-
由 mysterywolf 提交于
-
由 xiaoxiaolisunny 提交于
* 添加hc32f460系列外设WDT驱动 * format kconfig * Update drv_wdt.c Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 dongly 提交于
* Fix some compilation warning * 补充修正一些数据类型的使用错误 Co-authored-by:
Meco Man <920369182@qq.com>
-
- 02 8月, 2022 6 次提交
-
-
由 hipeanut 提交于
* [bsp/raspi3-32] fix some bug of funtion '__rt_ffs' * Update trap.c Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 liyangyang 提交于
-
由 还_没_想_好 提交于
-
由 emuzit 提交于
* ch569w-evt : add spi master driver, SPI0 tested * Update bsp/wch/risc-v/ch569w-evt/board/Kconfig * Update bsp/wch/risc-v/ch569w-evt/board/Kconfig Co-authored-by:
Man, Jianting (Meco) <920369182@qq.com>
-
由 Marcelo 提交于
* allow setting optional url for packages via envvar. * clean up left over * simplify code as suggested by Bernard (thanks) * fix typo (envvar name should be all upper case)
-
由 mysterywolf 提交于
-
- 01 8月, 2022 3 次提交
-
-
由 Meng 提交于
* [bsp][stm32] f407-robomaster-c板, 添加stm32定时器8pwm默认配置 * tab -> space * 取消DFS选定 Co-authored-by:
Meco Man <920369182@qq.com>
-
修改 F1/F4 配置文件uart改为uart1。 修改 F1/F4 main 打印内容。
-
由 梁生 提交于
-
- 31 7月, 2022 1 次提交
-
-
由 JamieTx 提交于
-
- 30 7月, 2022 4 次提交
-
-
由 emuzit 提交于
WCH CH569W-R0-1v0 evt board bsp port, first version dev/test under Ubuntu 20.04 toolchain from MounRiver_Studio_Community_Linux_x64_V120 tested drivers : SysTick, gpio, gpio interrupt, uart1 (RX interrupt, TX polling) libcpu/risc-v/SConscript : group includes rtconfig.CPU only if folder exists libcpu/risc-v/common/cpuport.c/rt_hw_context_switch_interrupt() : make it RT_WEAK for customization
-
由 Not Black Magic 提交于
Fix BSP bugs: -Added Touch INT GPIO Init code to pin_mux.c -Added new delay code for touch/video driver, using the rt-thread delay, in touchpad.c/.h
-
由 GUI 提交于
* [bsp/qemu-virt64-aarch64] RTC add hard alarm support * [bsp/qemu-virt64-aarch64] Fixup VirtIO-GPU init buffer fail by cpu out-of-order execution * [bsp/qemu-virt64-aarch64] Fixup VirtIO-NET transmit payload split Add Virtio-GPU cursor demo
-
由 mysterywolf 提交于
-
- 29 7月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 28 7月, 2022 6 次提交