* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes

* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566

this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).

- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.

* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md

* Update Captouch板载触摸按键配置说明.md
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

append some information about menuconfig -s

fixed py2 <==> py3 ValueError : unsupported pickle protocol: x

英飞凌 CY8CKIT-062S2-43012 BSP

add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver

https://club.rt-thread.org/ask/question/32d3a440402902f7.html

按照pinout布局图重新设计Arduino引脚布局和功能
- 目前PB0（D12, PWM）和PA15（D5，PWM）测试不通过
参考：https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716

attach #6229

Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.

* [fix] the risk for function exit() when open pthread support.
* [update] modify annotation from "user data" to "pthread_data".

* 优化imxrt的BSP下面的applications的Sconsript脚本

* add import os for sconscript in imxrt

* Use FreeRTOS wrapper

* Add console driver

* Add patch, .config. Update readme.

* Change date

* 对接RTdunio

https://github.com/RT-Thread/rt-thread/issues/6106
https://github.com/RT-Thread/rt-thread/issues/4467#issuecomment-850814143

* [document] Fix the doxygen file

[fix]mimxrt1170 Qspi flash bootup problems by loss of external flash conf and ivt header.
[add]green light instead printf on main.c.

* [kernel][timer] fixed bug serial_v2 驱动问题，导致所有写入都使用阻塞方式写入

* [simulator] fix some warnings

comes from https://github.com/RT-Thread/rt-thread/pull/5791

* [simulator] update kconfig
Co-authored-by: Nguozhanxin <guozhanxin@rt-thread.com>

* 添加hc32f460系列外设WDT驱动

* format kconfig

* Update drv_wdt.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Fix some compilation warning

* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <920369182@qq.com>

* [bsp/raspi3-32] fix some bug of funtion '__rt_ffs'

* Update trap.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* ch569w-evt : add spi master driver, SPI0 tested

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig

* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* allow setting optional url for packages via envvar.

* clean up left over

* simplify code as suggested by Bernard (thanks)

* fix typo (envvar name should be all upper case)