Skip to content

R
rt-thread

AdRainty / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 cb7fd304 编写于 作者: T tangzz98 提交者： GitHub
浏览文件
操作

ESP32_C3 migrate to ESP-IDF package (#6427)

上级 52e1d762
隐藏空白更改
内联 并排
Showing with 848 addition and 1109 deletion
bsp/ESP32_C3/.config
浏览文件 @ cb7fd304
......@@ -19,7 +19,9 @@ CONFIG_RT_TICK_PER_SECOND=1000
# CONFIG_RT_USING_HOOK is not set
# CONFIG_RT_USING_IDLE_HOOK is not set
CONFIG_IDLE_THREAD_STACK_SIZE=256
# CONFIG_RT_USING_TIMER_SOFT is not set
CONFIG_RT_USING_TIMER_SOFT=y
CONFIG_RT_TIMER_THREAD_PRIO=4
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
#
# kservice optimization
......@@ -65,7 +67,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=256
CONFIG_RT_CONSOLE_DEVICE_NAME="uart"
CONFIG_RT_VER_NUM=0x40101
CONFIG_RT_VER_NUM=0x50000
# CONFIG_RT_USING_CPU_FFS is not set
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
......@@ -405,6 +407,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
# CONFIG_PKG_USING_HASH_MATCH is not set
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
# CONFIG_PKG_USING_VOFA_PLUS is not set
#
# system packages
......@@ -440,7 +443,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
# CONFIG_PKG_USING_UC_CLK is not set
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_UC_MODBUS is not set
# CONFIG_PKG_USING_RTDUINO is not set
CONFIG_PKG_USING_FREERTOS_WRAPPER=y
CONFIG_PKG_FREERTOS_WRAPPER_PATH="/packages/system/FreeRTOS_Wrapper"
CONFIG_PKG_USING_FREERTOS_WRAPPER_LATEST_VERSION=y
......@@ -478,6 +480,7 @@ CONFIG_PKG_FREERTOS_WRAPPER_VER="latest"
# CONFIG_PKG_USING_KMULTI_RTIMER is not set
# CONFIG_PKG_USING_TFDB is not set
# CONFIG_PKG_USING_QPC is not set
# CONFIG_PKG_USING_AGILE_UPGRADE is not set
#
# peripheral libraries and drivers
......@@ -646,6 +649,39 @@ CONFIG_PKG_ESP_IDF_VER="latest"
# CONFIG_PKG_USING_MFBD is not set
# CONFIG_PKG_USING_SLCAN2RTT is not set
# CONFIG_PKG_USING_SOEM is not set
# CONFIG_PKG_USING_QPARAM is not set
#
# Arduino libraries
#
# CONFIG_PKG_USING_RTDUINO is not set
#
# Sensor libraries
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set
# CONFIG_PKG_USING_ARDUINO_DHT_SENSOR is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set
# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
#
# Display libraries
#
# CONFIG_PKG_USING_ARDUINO_U8G2 is not set
#
# Timing libraries
#
# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
#
# Project libraries
#
# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
CONFIG_SOC_ESPRESSIF=y
CONFIG_SOC_ESP32_C3=y
......
bsp/ESP32_C3/CMakeLists.txt
浏览文件 @ cb7fd304
# The following lines of boilerplate have to be in your project's
# CMakeLists in this exact order for cmake to work correctly
cmake_minimum_required(VERSION 3.5)
cmake_minimum_required(VERSION 3.16)
set(COMPONENTS esptool_py main)
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(rtthread)
bsp/ESP32_C3/README.md
浏览文件 @ cb7fd304
......@@ -43,37 +43,33 @@ Each peripheral supporting condition for this BSP is as follows:
| UART | Support | Using LUATOS_ESP32C3 development board requires connecting serial port to USB chip UART0_TX and UART0_RX (such as CP2102) |
| JTAG debug | Support | ESP32C3 usb-linked development boards can be debugged |
## Quickly Get Started
First of all, we'll need to build the IDE, Espressif officially recommends the IDF.
When installing the IDF, please select version 4.4. If you are familiar with the official IDF command line, you can also use the command line to perform the `idf.py build` directly in the `bsp/esp32_c3`, which has been tested and proved that it's functional
### ESP-IDF Adds RT-Thread patch
The IDF was running the FreeRTOS, so we'll need a few modifications to get to RT-Thread.
Copy the `rtt.patch` file to the IDF code directory, and then execute the next few commands on the `git bash` command line to mark the patch.
## Quick Start Guide
1. Download ESP-IDF package
```
cd esp/esp-idf
git checkout v4.4
git am rtt.patch
pkgs --update
```
If you don't want to use the patch file and have uploaded the code to GitHub, you can now go to [tangzz98/esp-idf](tangzz98/esp-idf) to download the latest `freertos_wrapper` branch code. After the modification, the original IDF example is still kept in normal use, they won't interfere with each other.
#### Compile and Download
Right-click `bsp/ESP32_C3` and use vscode to open the project
Compile and select the button at the bottom:
![build](images/build.png)
Here we usually use the serial port to download, you need to choose the corresponding serial port according to your own development board (if there is JTAG, you can also use JTAG to download and debug)
![](images/burn.png)
Once the project is successfully downloaded, the system runs automatically, the red LED will blink in 1s on cycles.
2. Go to ESP-IDF package directory and install IDF tools. This command only needs to be run once after the package is downloaded for the first time.
```
cd packages/ESP-IDF-latest
./install.sh
# Use install.bat in Windows environment
```
3. Under the ESP-IDF package directory, export IDF environment variables. This commands need to be run every time when the BSP is built in a new terminal.
```
. export.sh
# Use export.bat in Windows environment
```
4. Configure RT-Thread under the BSP directory
```
scons --menuconfig
```
5. Whenever RT-Thread configuration is changed with `scons --menuconfig`, a new `CMakeLists.txt` needs to be generated with the command below
```
scons --target=esp-idf
```
6. Use `idf.py` to compile and upload the program. Refer to [Espressif official documents](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html#build-your-first-project) for reference.
7. Once the project is successfully downloaded, the system runs automatically, the red LED will blink in 1s on cycles.
## Notes
......@@ -83,6 +79,7 @@ Once the project is successfully downloaded, the system runs automatically, the
Maintainer:
- [supperthomas](https://github.com/supperthomas) email address: [78900636@qq.com](mailto:78900636@qq.com)
- [tangzz98](https://github.com/tangzz98) email address: [tangz98@outlook.com](tangz98@outlook.com)
Special thanks to [chenyingchun0312](https://github.com/chenyingchun0312) for providing support on the RISC-V part working.
bsp/ESP32_C3/README_ZH.md
浏览文件 @ cb7fd304
......@@ -52,50 +52,42 @@
## 使用说明
### 快速上手
先要搭建IDE开发环境，乐鑫官方推荐使用IDF开发，这边建议使用vscode插件。
IDF的搭建方法有很多种，尝试了很多种方法之后，总结了一个比较好用的方法，并且可以使用vscode跨平台安装，非常简单方便，具体方法见链接[ESP-IDF 一键式搭建环境基于VSCODE](https://blog.csdn.net/lt6210925/article/details/123699249)。 安装的时候IDF版本请选择IDF 4.4版本。如果你对官方IDF命令行的方式熟悉的话，你也可以使用命令行的方式，直接在`bsp/esp32_c3`中执行`idf.py build`即可，这边已经测试过，是可以使用的。
### ESP-IDF 添加RT-THREAD patch
由于IDF使用的是FREERTOS，如果需要使用rt-thread就需要修改一些文件。将`rtt.patch` 这个文件拷贝到IDF的代码目录下面，然后在`git bash`命令行内执行命令下面几条命令就可以打上patch
1. 下载ESP-IDF软件包
```
cd esp/esp-idf
git checkout v4.4
git am rtt.patch
pkgs --update
```
如果不想用patch文件，已经将代码上传到github上面，可以进入[tangzz98/esp-idf](https://github.com/tangzz98/esp-idf/tree/freertos_wrapper) 下载最新的freertos_wrapper分支代码即可。修改之后的IDF，原来的IDF的example还是正常使用，互不干扰，可以放心使用。
#### 编译下载
在`bsp/ESP32_C3`中右击，然后使用vscode打开工程
编译选择最下面的按钮即可：
![build](images/build.png)
这边通常采用串口下载，需要根据你自己开发板选择对应的串口（如果有JTAG的，也可以用JTAG下载和调试）
![burn](images/burn.png)
#### 运行结果
下载程序成功之后，系统会运行，红色的 LED灯以 1S 周期闪烁。
感兴趣的可以通过公众号`Thomas的小火车`来联系
2. 进入到ESP-IDF软件包路径，安装IDf工具链。此命令只需要在下载完软件包后执行一次。
```
cd packages/ESP-IDF-latest
./install.sh
# Windows环境下使用install.bat
```
3. 在软件包路径下设置IDF路径。每当在新的命令行编译BSP时需要执行此命令。
```
. export.sh
# Windows环境下使用export.bat
```
4. 在BSP路径下配置RT-Thread
```
scons --menuconfig
```
5. 每当使用`scons --menuconfig`更改RT-Thread配置后需要重新生成`CMakeLists.txt`。
```
scons --target=esp-idf
```
6. 使用`idf.py`命令编译，烧录。具体参考[乐鑫官网](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html#build-your-first-project)
7. 下载程序成功之后，系统会运行，红色的 LED灯以 1S 周期闪烁。
## 注意事项
- 目前RTTHREAD支持起来了，后续会需要继续完善一些其他功能，刚开始使用ESP32，欢迎小伙伴一起来讨论和贡献。
- 目前RTTHREAD支持起来了，后续会需要继续完善一些其他功能，刚开始使用ESP32，欢迎小伙伴一起来讨论和贡献。感兴趣的可以通过公众号`Thomas的小火车`来联系
## 联系人信息
维护人:
- [supperthomas](https://github.com/supperthomas) 邮箱：<78900636@qq.com>
- [tangzz98](https://github.com/tangzz98) 邮箱：<tangz98@outlook.com>
## 特别感谢
......
bsp/ESP32_C3/SConscript 0 → 100644
浏览文件 @ cb7fd304
# for module compiling
import os
Import('RTT_ROOT')
cwd = str(Dir('#'))
objs = []
list = os.listdir(cwd)
for d in list:
path = os.path.join(cwd, d)
if os.path.isfile(os.path.join(path, 'SConscript')):
objs = objs + SConscript(os.path.join(d, 'SConscript'))
Return('objs')
bsp/ESP32_C3/SConstruct 0 → 100644
浏览文件 @ cb7fd304
import os
import sys
import rtconfig
if os.getenv('RTT_ROOT'):
RTT_ROOT = os.getenv('RTT_ROOT')
else:
RTT_ROOT = os.path.join(os.getcwd(), '..', '..')
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
from building import *
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
DefaultEnvironment(tools=[])
env = Environment(tools = ['mingw'],
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
AR = rtconfig.AR, ARFLAGS = '-rc',
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
env['ASCOM'] = env['ASPPCOM']
Export('RTT_ROOT')
Export('rtconfig')
# prepare building environment
objs = PrepareBuilding(env, RTT_ROOT, remove_components = ['libc'])
# make a building
DoBuilding(TARGET, objs)
bsp/ESP32_C3/drivers/SConscript 0 → 100644
浏览文件 @ cb7fd304
import os
from building import *
cwd = GetCurrentDir()
src = Glob('*.c')
CPPPATH = [cwd]
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/ESP32_C3/drivers/board.c 0 → 100644
浏览文件 @ cb7fd304
/*
* Copyright (c) 2021-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-06-02 supperthomas first version
*/
#include <rtthread.h>
#include "hal/systimer_hal.h"
#include "hal/systimer_ll.h"
#include "esp_private/panic_internal.h"
#include "esp_private/systimer.h"
#include "esp_private/periph_ctrl.h"
#include "esp_intr_alloc.h"
#include "esp_attr.h"
static systimer_hal_context_t systimer_hal;
IRAM_ATTR void rt_SysTickIsrHandler(void *arg)
{
systimer_ll_clear_alarm_int(systimer_hal.dev, SYSTIMER_LL_ALARM_OS_TICK_CORE0);
rt_interrupt_enter();
rt_tick_increase();
rt_interrupt_leave();
}
void rt_hw_systick_init(void)
{
esp_intr_alloc(ETS_SYSTIMER_TARGET0_EDGE_INTR_SOURCE, ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1, rt_SysTickIsrHandler, &systimer_hal, NULL);
periph_module_enable(PERIPH_SYSTIMER_MODULE);
systimer_hal_init(&systimer_hal);
systimer_hal_tick_rate_ops_t ops = {
.ticks_to_us = systimer_ticks_to_us,
.us_to_ticks = systimer_us_to_ticks,
};
systimer_hal_set_tick_rate_ops(&systimer_hal, &ops);
systimer_ll_set_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK, 0);
systimer_ll_apply_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK);
systimer_hal_connect_alarm_counter(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, SYSTIMER_LL_COUNTER_OS_TICK);
systimer_hal_set_alarm_period(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, 1000000UL / RT_TICK_PER_SECOND);
systimer_hal_select_alarm_mode(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, SYSTIMER_ALARM_MODE_PERIOD);
systimer_hal_counter_can_stall_by_cpu(&systimer_hal, 1, 0, true);
systimer_hal_enable_alarm_int(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0);
systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK);
}
void rt_hw_board_init(void)
{
rt_hw_systick_init();
/* Board underlying hardware initialization */
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
}
bsp/ESP32_C3/main/board.h → bsp/ESP32_C3/drivers/board.h
浏览文件 @ cb7fd304
......@@ -11,13 +11,13 @@
#ifndef __BOARD_H__
#define __BOARD_H__
#include <rtthread.h>
#include "drv_gpio.h"
#include <rtconfig.h>
#ifdef __cplusplus
extern "C" {
#endif
void rt_hw_board_init(void);
#ifdef __cplusplus
}
......
bsp/ESP32_C3/main/drv_gpio.c → bsp/ESP32_C3/drivers/drv_gpio.c
浏览文件 @ cb7fd304
......@@ -9,14 +9,11 @@
*
*/
#include "drv_gpio.h"
#include <stdio.h>
#ifdef RT_USING_PIN
#define DBG_LEVEL DBG_LOG
#define LOG_TAG "drv.gpio"
#include <rtdbg.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "driver/gpio.h"
#ifdef RT_USING_PIN
static void mcu_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
{
......@@ -97,5 +94,4 @@ int rt_hw_pin_init(void)
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
#endif /* RT_USING_PIN */
bsp/ESP32_C3/main/drv_gpio.h → bsp/ESP32_C3/drivers/drv_gpio.h
浏览文件 @ cb7fd304
......@@ -12,16 +12,10 @@
#ifndef __DRV_GPIO_H__
#define __DRV_GPIO_H__
#include <rtthread.h>
#include <rthw.h>
#ifdef RT_USING_DEVICE
#include <rtdevice.h>
#endif
#include "driver/gpio.h"
#include <rtconfig.h>
#ifdef RT_USING_PIN
int rt_hw_pin_init(void);
#endif
#endif /* __DRV_GPIO_H__ */
bsp/ESP32_C3/main/drv_uart.c → bsp/ESP32_C3/drivers/drv_uart.c
浏览文件 @ cb7fd304
......@@ -9,7 +9,11 @@
*
*/
#include "drv_uart.h"
#include <rtthread.h>
#include <rtdevice.h>
#include "driver/uart.h"
#include "hal/uart_hal.h"
#include "sdkconfig.h"
#ifdef RT_USING_SERIAL_V1
......
bsp/ESP32_C3/main/drv_uart.h → bsp/ESP32_C3/drivers/drv_uart.h
浏览文件 @ cb7fd304
......@@ -12,17 +12,10 @@
#ifndef __DRV_UART_H__
#define __DRV_UART_H__
#include <rtthread.h>
#include <rthw.h>
#ifdef RT_USING_DEVICE
#include <rtdevice.h>
#endif
#include "driver/uart.h"
#include "hal/uart_hal.h"
#include "sdkconfig.h"
#include <rtconfig.h>
#ifdef RT_USING_SERIAL_V1
int rt_hw_uart_init(void);
#endif
#endif /* __DRV_UART_H__ */
bsp/ESP32_C3/main/CMakeLists.txt
浏览文件 @ cb7fd304
idf_component_register(SRCS "board.c" "main.c"
"drv_gpio.c"
"drv_uart.c"
"../../../libcpu/risc-v/common/cpuport.c"
"../../../libcpu/risc-v/common/context_gcc.S"
"../../../src/components.c"
"../../../src/scheduler.c"
"../../../src/device.c"
"../../../src/clock.c"
"../../../src/irq.c"
"../../../src/thread.c"
"../../../src/mempool.c"
"../../../src/ipc.c"
"../../../src/mem.c"
"../../../src/object.c"
"../../../src/idle.c"
"../../../src/timer.c"
"../../../src/kservice.c"
"../../../src/device.c"
"../../../components/drivers/misc/pin.c"
"../../../components/drivers/ipc/pipe.c"
"../../../components/drivers/ipc/ringblk_buf.c"
"../../../components/drivers/ipc/waitqueue.c"
"../../../components/drivers/ipc/completion.c"
"../../../components/drivers/ipc/dataqueue.c"
"../../../components/drivers/ipc/ringbuffer.c"
"../../../components/drivers/ipc/workqueue.c"
"../../../components/drivers/serial/serial.c"
"../../../components/finsh/cmd.c"
"../../../components/finsh/msh_file.c"
"../../../components/finsh/msh_parse.c"
"../../../components/finsh/msh.c"
"../../../components/finsh/shell.c"
idf_component_register(
SRCS
../../../libcpu/risc-v/common/cpuport.c
../../../libcpu/risc-v/common/context_gcc.S
../../../components/drivers/ipc/completion.c
../../../components/drivers/ipc/dataqueue.c
../../../components/drivers/ipc/pipe.c
../../../components/drivers/ipc/ringblk_buf.c
../../../components/drivers/ipc/ringbuffer.c
../../../components/drivers/ipc/waitqueue.c
../../../components/drivers/ipc/workqueue.c
../../../components/drivers/misc/pin.c
../../../components/drivers/serial/serial.c
../drivers/drv_uart.c
../drivers/board.c
../drivers/drv_gpio.c
../../../components/finsh/shell.c
../../../components/finsh/msh.c
../../../components/finsh/msh_parse.c
../../../components/finsh/cmd.c
../../../src/clock.c
../../../src/components.c
../../../src/device.c
../../../src/idle.c
../../../src/ipc.c
../../../src/irq.c
../../../src/kservice.c
../../../src/mem.c
../../../src/mempool.c
../../../src/object.c
../../../src/scheduler.c
../../../src/thread.c
../../../src/timer.c
main.c
INCLUDE_DIRS
"../../../components/drivers/include/drivers"
INCLUDE_DIRS
../../../libcpu/risc-v/common
../../../components/drivers/include
../drivers
../../../components/finsh
..
../../../include
)
"../../../components/drivers/include"
"../../../components/finsh"
"."
"../../../include"
"../../../libcpu/risc-v/common"
"../")
ADD_DEFINITIONS(
-D__RTTHREAD__
target_link_libraries(${COMPONENT_LIB}
INTERFACE "-u __rt_init_rt_work_sys_workqueue_init"
INTERFACE "-u __rt_init_rt_hw_uart_init"
INTERFACE "-u __rt_init_rt_hw_pin_init"
INTERFACE "-u __rt_init_finsh_system_init"
)
#TODO
#list(APPEND LINK_FLAGS "-u __rt_init_desc_rt_hw_pin_init")
#set(compile_options "-u __rt_init_desc_rt_hw_pin_init")
\ No newline at end of file
bsp/ESP32_C3/main/SConscript 0 → 100644
浏览文件 @ cb7fd304
import os
from building import *
cwd = GetCurrentDir()
src = Glob('*.c')
CPPPATH = []
group = DefineGroup('Main', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/ESP32_C3/main/board.c 已删除 100644 → 0
浏览文件 @ 52e1d762
/*
* Copyright (c) 2021-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-06-02 supperthomas first version
*/
#include <stdio.h>
#include "esp_private/panic_internal.h"
#include "hal/uart_hal.h"
#include "driver/timer.h"
#include "soc/periph_defs.h"
#include "hal/systimer_hal.h"
#include "hal/systimer_ll.h"
#include "esp_intr_alloc.h"
#include "rtthread.h"
#include "rthw.h"
#include "drv_gpio.h"
#include "drv_uart.h"
#include "shell.h"
#ifdef RT_USING_COMPONENTS_INIT
/*
* Components Initialization will initialize some driver and components as following
* order:
* rti_start --> 0
* BOARD_EXPORT --> 1
* rti_board_end --> 1.end
*
* DEVICE_EXPORT --> 2
* COMPONENT_EXPORT --> 3
* FS_EXPORT --> 4
* ENV_EXPORT --> 5
* APP_EXPORT --> 6
*
* rti_end --> 6.end
*
* These automatically initialization, the driver or component initial function must
* be defined with:
* INIT_BOARD_EXPORT(fn);
* INIT_DEVICE_EXPORT(fn);
* ...
* INIT_APP_EXPORT(fn);
* etc.
*/
static int rti_start(void)
{
return 0;
}
INIT_EXPORT(rti_start, "0");
static int rti_board_start(void)
{
return 0;
}
INIT_EXPORT(rti_board_start, "0.end");
static int rti_board_end(void)
{
return 0;
}
INIT_EXPORT(rti_board_end, "1.end");
static int rti_end(void)
{
return 0;
}
INIT_EXPORT(rti_end, "6.end");
/**
* @brief Onboard components initialization. In this function, the board-level
* initialization function will be called to complete the initialization
* of the on-board peripherals.
*/
void rt_components_board_init(void)
{
#if RT_DEBUG_INIT
int result;
const struct rt_init_desc *desc;
for (desc = &__rt_init_desc_rti_board_start; desc < &__rt_init_desc_rti_board_end; desc ++)
{
rt_kprintf("rt_components_board_init initialize %s", desc->fn_name);
result = desc->fn();
rt_kprintf(":%d done\n", result);
}
#else
volatile const init_fn_t *fn_ptr;
for (fn_ptr = &__rt_init_rti_board_start; fn_ptr < &__rt_init_rti_board_end; fn_ptr++)
{
(*fn_ptr)();
}
#endif /* RT_DEBUG_INIT */
}
/**
* @brief RT-Thread Components Initialization.
*/
void rt_components_init(void)
{
#if RT_DEBUG_INIT
int result;
const struct rt_init_desc *desc;
rt_kprintf("do components initialization.\n");
for (desc = &__rt_init_desc_rti_board_end; desc < &__rt_init_desc_rti_end; desc ++)
{
rt_kprintf("rt_components_init initialize %s", desc->fn_name);
result = desc->fn();
rt_kprintf(":%d done\n", result);
}
#else
volatile const init_fn_t *fn_ptr;
for (fn_ptr = &__rt_init_rti_board_end; fn_ptr < &__rt_init_rti_end; fn_ptr ++)
{
(*fn_ptr)();
}
#endif /* RT_DEBUG_INIT */
}
#endif /* RT_USING_COMPONENTS_INIT */
void main_thread_entry(void *parameter)
{
#ifdef RT_USING_COMPONENTS_INIT
/* RT-Thread components initialization */
rt_components_init();
#endif /* RT_USING_COMPONENTS_INIT */
extern int rtt_main();
rtt_main();
}
void rt_application_init(void)
{
rt_thread_t tid;
#define RT_MAIN_THREAD_STACK_SIZE 2048
#define RT_MAIN_THREAD_PRIORITY 10
tid = rt_thread_create("main", main_thread_entry, RT_NULL,
RT_MAIN_THREAD_STACK_SIZE, RT_MAIN_THREAD_PRIORITY, 20);
RT_ASSERT(tid != RT_NULL);
rt_thread_startup(tid);
}
//component
static uint32_t uwTick = 0;
static systimer_hal_context_t systimer_hal;
IRAM_ATTR void rt_SysTickIsrHandler(void *arg)
{
systimer_ll_clear_alarm_int(systimer_hal.dev, 1);
rt_interrupt_enter();
rt_tick_increase();
uwTick++;
/* leave interrupt */
rt_interrupt_leave();
systimer_ll_is_alarm_int_fired(systimer_hal.dev, 1);
}
void rt_hw_systick_init(void)
{
uint8_t system_timer_counter=1;
//rt_hw_interrupt_enable(0);
esp_intr_alloc(ETS_SYSTIMER_TARGET1_EDGE_INTR_SOURCE, ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1, rt_SysTickIsrHandler, &systimer_hal, NULL);
systimer_hal_init(&systimer_hal);
systimer_ll_set_counter_value(systimer_hal.dev, system_timer_counter, 0);
systimer_ll_apply_counter_value(systimer_hal.dev, system_timer_counter);
uint32_t alarm_id = 1 ;
systimer_hal_connect_alarm_counter(&systimer_hal, alarm_id, system_timer_counter);
systimer_hal_set_alarm_period(&systimer_hal, alarm_id, 1000000UL / 1000);
systimer_hal_select_alarm_mode(&systimer_hal, alarm_id, SYSTIMER_ALARM_MODE_PERIOD);
systimer_hal_counter_can_stall_by_cpu(&systimer_hal, 1, 0, true);
systimer_hal_enable_alarm_int(&systimer_hal, alarm_id);
systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK);
}
void rt_hw_board_init(void)
{
rt_hw_systick_init();
/* Board underlying hardware initialization */
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
}
static void rtthread_startup(void)
{
rt_hw_interrupt_disable();
/* init board */
rt_hw_board_init();
/* timer system initialization */
rt_system_timer_init();
/* create init_thread */
rt_application_init();
/* timer thread initialization */
rt_system_timer_thread_init();
/* idle thread initialization */
rt_thread_idle_init();
/* start scheduler */
rt_system_scheduler_start();
/* init scheduler system */
rt_hw_pin_init();
rt_hw_uart_init();
finsh_system_init();
/* never reach here */
return ;
}
void app_main(void)
{
/* startup RT-Thread RTOS */
rtthread_startup();
return;
}
bsp/ESP32_C3/main/main.c
浏览文件 @ cb7fd304
......@@ -13,10 +13,8 @@
#include <rtdevice.h>
#include <board.h>
int rtt_main(void)
int main(void)
{
/* show RT-Thread version */
rt_show_version();
rt_kprintf("Hello!RT-THREAD!\r\n");
rt_pin_mode(RT_BSP_LED_PIN, PIN_MODE_OUTPUT);
while (1)
......
bsp/ESP32_C3/rtconfig.h
浏览文件 @ cb7fd304
......@@ -12,6 +12,9 @@
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 1000
#define IDLE_THREAD_STACK_SIZE 256
#define RT_USING_TIMER_SOFT
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
/* kservice optimization */
......@@ -37,7 +40,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 256
#define RT_CONSOLE_DEVICE_NAME "uart"
#define RT_VER_NUM 0x40101
#define RT_VER_NUM 0x50000
/* RT-Thread Components */
......@@ -62,9 +65,10 @@
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_USING_PIN
#define RT_USING_SERIAL
#define RT_USING_SERIAL_V1
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN
/* Using USB */
......@@ -168,6 +172,21 @@
/* entertainment: terminal games and other interesting software packages */
/* Arduino libraries */
/* Sensor libraries */
/* Display libraries */
/* Timing libraries */
/* Project libraries */
#define SOC_ESPRESSIF
#define SOC_ESP32_C3
......
bsp/ESP32_C3/rtconfig.py 0 → 100644
浏览文件 @ cb7fd304
import os
# toolchains options
ARCH ='risc-v'
CPU =''
CROSS_TOOL ='gcc'
if os.getenv('RTT_CC'):
CROSS_TOOL = os.getenv('RTT_CC')
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = r'~/.espressif/tools/riscv32-esp-elf/esp-2022r1-11.2.0/riscv32-esp-elf/bin'
else:
print('Please make sure your toolchains is GNU GCC!')
exit(0)
if os.getenv('RTT_EXEC_PATH'):
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
BUILD = 'debug'
if PLATFORM == 'gcc':
# toolchains
PREFIX = 'riscv32-esp-elf-'
CC = PREFIX + 'gcc'
CXX = PREFIX + 'g++'
AS = PREFIX + 'gcc'
AR = PREFIX + 'ar'
LINK = PREFIX + 'gcc'
TARGET_EXT = 'elf'
SIZE = PREFIX + 'size'
OBJDUMP = PREFIX + 'objdump'
OBJCPY = PREFIX + 'objcopy'
STRIP = PREFIX + 'strip'
CFLAGS = ''
AFLAGS = ''
LFLAGS = ''
CXXFLAGS = ''
POST_ACTION = ''
bsp/ESP32_C3/sdkconfig
浏览文件 @ cb7fd304
......@@ -2,20 +2,215 @@
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_SOC_ADC_SUPPORTED=y
CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
CONFIG_SOC_GDMA_SUPPORTED=y
CONFIG_SOC_TWAI_SUPPORTED=y
CONFIG_SOC_BT_SUPPORTED=y
CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y
CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
CONFIG_SOC_XT_WDT_SUPPORTED=y
CONFIG_SOC_WIFI_SUPPORTED=y
CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y
CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y
CONFIG_SOC_EFUSE_HAS_EFUSE_RST_BUG=y
CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
CONFIG_SOC_RTC_MEM_SUPPORTED=y
CONFIG_SOC_I2S_SUPPORTED=y
CONFIG_SOC_RMT_SUPPORTED=y
CONFIG_SOC_SDM_SUPPORTED=y
CONFIG_SOC_SYSTIMER_SUPPORTED=y
CONFIG_SOC_SUPPORT_COEXISTENCE=y
CONFIG_SOC_AES_SUPPORTED=y
CONFIG_SOC_MPI_SUPPORTED=y
CONFIG_SOC_SHA_SUPPORTED=y
CONFIG_SOC_HMAC_SUPPORTED=y
CONFIG_SOC_DIG_SIGN_SUPPORTED=y
CONFIG_SOC_FLASH_ENC_SUPPORTED=y
CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
CONFIG_SOC_MEMPROT_SUPPORTED=y
CONFIG_SOC_XTAL_SUPPORT_40M=y
CONFIG_SOC_AES_SUPPORT_DMA=y
CONFIG_SOC_AES_GDMA=y
CONFIG_SOC_AES_SUPPORT_AES_128=y
CONFIG_SOC_AES_SUPPORT_AES_256=y
CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
CONFIG_SOC_ADC_ARBITER_SUPPORTED=y
CONFIG_SOC_ADC_FILTER_SUPPORTED=y
CONFIG_SOC_ADC_MONITOR_SUPPORTED=y
CONFIG_SOC_ADC_DMA_SUPPORTED=y
CONFIG_SOC_ADC_PERIPH_NUM=2
CONFIG_SOC_ADC_MAX_CHANNEL_NUM=5
CONFIG_SOC_ADC_ATTEN_NUM=4
CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=1
CONFIG_SOC_ADC_PATT_LEN_MAX=8
CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12
CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4
CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4
CONFIG_SOC_ADC_DIGI_FILTER_NUM=2
CONFIG_SOC_ADC_DIGI_MONITOR_NUM=2
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=83333
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=611
CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=12
CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12
CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED=y
CONFIG_SOC_APB_BACKUP_DMA=y
CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y
CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y
CONFIG_SOC_CACHE_MEMORY_IBANK_SIZE=0x4000
CONFIG_SOC_CPU_CORES_NUM=1
CONFIG_SOC_CPU_INTR_NUM=32
CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC=y
CONFIG_SOC_CPU_BREAKPOINTS_NUM=8
CONFIG_SOC_CPU_WATCHPOINTS_NUM=8
CONFIG_SOC_CPU_WATCHPOINT_SIZE=0x80000000
CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=3072
CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
CONFIG_SOC_GDMA_GROUPS=1
CONFIG_SOC_GDMA_PAIRS_PER_GROUP=3
CONFIG_SOC_GDMA_TX_RX_SHARE_INTERRUPT=y
CONFIG_SOC_GPIO_PORT=1
CONFIG_SOC_GPIO_PIN_COUNT=22
CONFIG_SOC_GPIO_SUPPORTS_RTC_INDEPENDENT=y
CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y
CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP=y
CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK=0
CONFIG_SOC_GPIO_SUPPORT_SLP_SWITCH=y
CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE=y
CONFIG_SOC_I2C_NUM=1
CONFIG_SOC_I2C_FIFO_LEN=32
CONFIG_SOC_I2C_SUPPORT_SLAVE=y
CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS=y
CONFIG_SOC_I2C_SUPPORT_XTAL=y
CONFIG_SOC_I2C_SUPPORT_RTC=y
CONFIG_SOC_I2S_NUM=y
CONFIG_SOC_I2S_HW_VERSION_2=y
CONFIG_SOC_I2S_SUPPORTS_PCM=y
CONFIG_SOC_I2S_SUPPORTS_PDM=y
CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
CONFIG_SOC_I2S_SUPPORTS_PDM_CODEC=y
CONFIG_SOC_I2S_SUPPORTS_TDM=y
CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
CONFIG_SOC_LEDC_CHANNEL_NUM=6
CONFIG_SOC_LEDC_TIMER_BIT_WIDE_NUM=14
CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y
CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
CONFIG_SOC_RMT_GROUPS=1
CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=2
CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=2
CONFIG_SOC_RMT_CHANNELS_PER_GROUP=4
CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y
CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y
CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y
CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y
CONFIG_SOC_RMT_SUPPORT_XTAL=y
CONFIG_SOC_RMT_SUPPORT_APB=y
CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=108
CONFIG_SOC_RTC_SLOW_CLOCK_SUPPORT_8MD256=y
CONFIG_SOC_RTCIO_PIN_COUNT=0
CONFIG_SOC_RSA_MAX_BIT_LEN=3072
CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
CONFIG_SOC_SHA_SUPPORT_DMA=y
CONFIG_SOC_SHA_SUPPORT_RESUME=y
CONFIG_SOC_SHA_GDMA=y
CONFIG_SOC_SHA_SUPPORT_SHA1=y
CONFIG_SOC_SHA_SUPPORT_SHA224=y
CONFIG_SOC_SHA_SUPPORT_SHA256=y
CONFIG_SOC_SDM_GROUPS=1
CONFIG_SOC_SDM_CHANNELS_PER_GROUP=4
CONFIG_SOC_SPI_PERIPH_NUM=2
CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
CONFIG_SOC_SPI_SUPPORT_DDRCLK=y
CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS=y
CONFIG_SOC_SPI_SUPPORT_CD_SIG=y
CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS=y
CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y
CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT=y
CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR=y
CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS=y
CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
CONFIG_SOC_SYSTIMER_COUNTER_NUM=2
CONFIG_SOC_SYSTIMER_ALARM_NUM=3
CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO=32
CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI=20
CONFIG_SOC_SYSTIMER_FIXED_DIVIDER=y
CONFIG_SOC_SYSTIMER_INT_LEVEL=y
CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE=y
CONFIG_SOC_TIMER_GROUPS=2
CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=1
CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54
CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y
CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=2
CONFIG_SOC_TWAI_BRP_MIN=2
CONFIG_SOC_TWAI_BRP_MAX=16384
CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS=y
CONFIG_SOC_SECURE_BOOT_V2_RSA=y
CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=512
CONFIG_SOC_UART_NUM=2
CONFIG_SOC_UART_FIFO_LEN=128
CONFIG_SOC_UART_BITRATE_MAX=5000000
CONFIG_SOC_UART_SUPPORT_APB_CLK=y
CONFIG_SOC_UART_SUPPORT_RTC_CLK=y
CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y
CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
CONFIG_SOC_UART_REQUIRE_CORE_RESET=y
CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y
CONFIG_SOC_COEX_HW_PTI=y
CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_CPU_PD=y
CONFIG_SOC_PM_SUPPORT_WIFI_PD=y
CONFIG_SOC_PM_SUPPORT_BT_PD=y
CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y
CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL=y
CONFIG_SOC_WIFI_HW_TSF=y
CONFIG_SOC_WIFI_FTM_SUPPORT=y
CONFIG_SOC_WIFI_GCMP_SUPPORT=y
CONFIG_SOC_WIFI_WAPI_SUPPORT=y
CONFIG_SOC_WIFI_CSI_SUPPORT=y
CONFIG_SOC_WIFI_MESH_SUPPORT=y
CONFIG_SOC_BLE_SUPPORTED=y
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_RISCV=y
CONFIG_IDF_TARGET_ARCH="riscv"
CONFIG_IDF_TARGET="esp32c3"
CONFIG_IDF_TARGET_ESP32C3=y
CONFIG_IDF_RTOS_RTTHREAD=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005
#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="riscv32-esp-elf-"
# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
# end of SDK tool configuration
#
# Build type
#
......@@ -24,18 +219,10 @@ CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# CONFIG_APP_REPRODUCIBLE_BUILD is not set
# CONFIG_APP_NO_BLOBS is not set
# end of Build type
#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager
#
# Bootloader config
#
......@@ -54,6 +241,7 @@ CONFIG_BOOTLOADER_LOG_LEVEL=3
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
......@@ -69,13 +257,34 @@ CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
#
# Security features
#
CONFIG_SECURE_BOOT_SUPPORTS_RSA=y
CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y
CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED=y
CONFIG_SECURE_BOOT_V2_PREFERRED=y
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
CONFIG_SECURE_ROM_DL_MODE_ENABLED=y
# end of Security features
#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager
CONFIG_ESP_ROM_HAS_CRC_LE=y
CONFIG_ESP_ROM_HAS_CRC_BE=y
CONFIG_ESP_ROM_HAS_JPEG_DECODE=y
CONFIG_ESP_ROM_UART_CLK_IS_XTAL=y
CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=3
CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING=y
CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG=y
CONFIG_ESP_ROM_GET_CLK_FREQ=y
CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y
#
# Boot ROM Behavior
#
......@@ -88,7 +297,6 @@ CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
#
# Serial flasher config
#
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_NO_STUB is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
......@@ -106,23 +314,17 @@ CONFIG_ESPTOOLPY_FLASHFREQ="80m"
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config
......@@ -149,6 +351,7 @@ CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
......@@ -160,7 +363,6 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set
# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options
......@@ -169,197 +371,102 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
#
#
# Application Level Tracing
#
# CONFIG_APPTRACE_DEST_JTAG is not set
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing
#
# ESP-ASIO
#
# CONFIG_ASIO_SSL_SUPPORT is not set
# end of ESP-ASIO
#
# Bluetooth
#
# CONFIG_BT_ENABLED is not set
# end of Bluetooth
#
# CoAP Configuration
#
CONFIG_COAP_MBEDTLS_PSK=y
# CONFIG_COAP_MBEDTLS_PKI is not set
# CONFIG_COAP_MBEDTLS_DEBUG is not set
CONFIG_COAP_LOG_DEFAULT_LEVEL=0
# end of CoAP Configuration
#
# Driver configurations
# Driver Configurations
#
#
# ADC configuration
# Legacy ADC Configuration
#
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration
# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set
#
# MCPWM configuration
# Legacy ADC Calibration Configuration
#
# CONFIG_MCPWM_ISR_IN_IRAM is not set
# end of MCPWM configuration
# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set
# end of Legacy ADC Calibration Configuration
# end of Legacy ADC Configuration
#
# SPI configuration
# SPI Configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# end of SPI configuration
# end of SPI Configuration
#
# TWAI configuration
# TWAI Configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
# end of TWAI configuration
#
# UART configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART configuration
#
# GDMA Configuration
#
# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
# CONFIG_GDMA_ISR_IRAM_SAFE is not set
# end of GDMA Configuration
# end of Driver configurations
#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
CONFIG_EFUSE_MAX_BLK_LEN=256
# end of eFuse Bit Manager
#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
# CONFIG_ESP_TLS_SERVER is not set
# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS
#
# ESP32C3-Specific
#
# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160
# CONFIG_ESP32C3_REV_MIN_0 is not set
# CONFIG_ESP32C3_REV_MIN_1 is not set
# CONFIG_ESP32C3_REV_MIN_2 is not set
CONFIG_ESP32C3_REV_MIN_3=y
CONFIG_ESP32C3_REV_MIN=3
CONFIG_ESP32C3_DEBUG_OCDAWARE=y
# CONFIG_ESP32C3_DEBUG_STUBS_ENABLE is not set
CONFIG_ESP32C3_BROWNOUT_DET=y
CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set
CONFIG_ESP32C3_BROWNOUT_DET_LVL=7
CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024
# CONFIG_ESP32C3_NO_BLOBS is not set
# end of ESP32C3-Specific
# end of TWAI Configuration
#
# ADC-Calibration
# Temperature sensor Configuration
#
# end of ADC-Calibration
# CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_TEMP_SENSOR_ENABLE_DEBUG_LOG is not set
# end of Temperature sensor Configuration
#
# Common ESP-related
# UART Configuration
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART Configuration
#
# Ethernet
# GPIO Configuration
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet
# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set
# end of GPIO Configuration
#
# Event Loop Library
# Sigma Delta Modulator Configuration
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library
# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set
# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_SDM_ENABLE_DEBUG_LOG is not set
# end of Sigma Delta Modulator Configuration
#
# GDB Stub
# GPTimer Configuration
#
# end of GDB Stub
# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set
# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set
# end of GPTimer Configuration
#
# ESP HTTP client
# RMT Configuration
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
# end of ESP HTTP client
# CONFIG_RMT_ISR_IRAM_SAFE is not set
# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_RMT_ENABLE_DEBUG_LOG is not set
# end of RMT Configuration
#
# HTTP Server
# I2S Configuration
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
# CONFIG_HTTPD_WS_SUPPORT is not set
# end of HTTP Server
# CONFIG_I2S_ISR_IRAM_SAFE is not set
# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_I2S_ENABLE_DEBUG_LOG is not set
# end of I2S Configuration
# end of Driver Configurations
#
# ESP HTTPS OTA
# eFuse Bit Manager
#
# CONFIG_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
CONFIG_EFUSE_MAX_BLK_LEN=256
# end of eFuse Bit Manager
#
# ESP HTTPS server
# Common ESP-related
#
# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
# end of ESP HTTPS server
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related
#
# Hardware Settings
......@@ -384,42 +491,53 @@ CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y
# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set
# end of Sleep Config
# end of Hardware Settings
#
# IPC (Inter-Processor Call)
# RTC Clock Config
#
CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
# end of IPC (Inter-Processor Call)
CONFIG_RTC_CLK_SRC_INT_RC=y
# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_RTC_CLK_CAL_CYCLES=1024
CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB=y
# end of RTC Clock Config
#
# LCD and Touch Panel
# Peripheral Control
#
# CONFIG_PERIPH_CTRL_FUNC_IN_IRAM is not set
# end of Peripheral Control
#
# LCD Peripheral Configuration
# MMU Config
#
CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
# end of LCD Peripheral Configuration
# end of LCD and Touch Panel
CONFIG_MMU_PAGE_SIZE_64KB=y
CONFIG_MMU_PAGE_MODE="64KB"
CONFIG_MMU_PAGE_SIZE=0x10000
# end of MMU Config
# CONFIG_ESP32C3_REV_MIN_0 is not set
# CONFIG_ESP32C3_REV_MIN_1 is not set
# CONFIG_ESP32C3_REV_MIN_2 is not set
CONFIG_ESP32C3_REV_MIN_3=y
# CONFIG_ESP32C3_REV_MIN_4 is not set
CONFIG_ESP32C3_REV_MIN=3
#
# ESP NETIF Adapter
# GDMA Configuration
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter
# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
# CONFIG_GDMA_ISR_IRAM_SAFE is not set
# end of GDMA Configuration
#
# PHY
# Main XTAL Config
#
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP_PHY_MAX_TX_POWER=20
# end of PHY
CONFIG_XTAL_FREQ_40=y
CONFIG_XTAL_FREQ=40
# end of Main XTAL Config
# end of Hardware Settings
#
# Power Management
......@@ -428,9 +546,19 @@ CONFIG_ESP_PHY_MAX_TX_POWER=20
CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
# end of Power Management
#
# ESP Ringbuf
#
# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
# CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH is not set
# end of ESP Ringbuf
#
# ESP System Settings
#
# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
......@@ -444,11 +572,8 @@ CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
#
# Memory protection
#
CONFIG_ESP_SYSTEM_MEMPROT_DEPCHECK=y
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=y
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y
CONFIG_ESP_SYSTEM_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
CONFIG_ESP_SYSTEM_MEMPROT_MEM_ALIGN_SIZE=512
# end of Memory protection
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
......@@ -470,9 +595,32 @@ CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
# CONFIG_ESP_INT_WDT is not set
# CONFIG_ESP_TASK_WDT is not set
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
# CONFIG_ESP_DEBUG_OCDAWARE is not set
CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
#
# Brownout Detector
#
CONFIG_ESP_BROWNOUT_DET=y
CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7=y
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
CONFIG_ESP_BROWNOUT_DET_LVL=7
# end of Brownout Detector
CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y
# end of ESP System Settings
#
# IPC (Inter-Processor Call)
#
CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
# end of IPC (Inter-Processor Call)
#
# High resolution timer (esp_timer)
#
......@@ -486,149 +634,54 @@ CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
# end of High resolution timer (esp_timer)
#
# Wi-Fi
#
CONFIG_ESP32_WIFI_ENABLED=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
# CONFIG_ESP_WIFI_FTM_ENABLE is not set
# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set
# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set
# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
# end of Wi-Fi
#
# Core dump
#
# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
# end of Core dump
#
# FAT Filesystem support
#
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
# CONFIG_FATFS_LFN_HEAP is not set
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
# CONFIG_FATFS_USE_FASTSEEK is not set
# end of FAT Filesystem support
#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
CONFIG_FMB_PORT_TASK_AFFINITY=0x7FFFFFFF
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
# CONFIG_FMB_TIMER_PORT_ENABLED is not set
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
CONFIG_FMB_MASTER_TIMER_GROUP=0
CONFIG_FMB_MASTER_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration
# FreeRTOS
#
#
# FreeRTOS
# Kernel
#
# CONFIG_FREERTOS_SMP is not set
CONFIG_FREERTOS_UNICORE=y
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY is not set
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
# CONFIG_FREERTOS_USE_IDLE_HOOK is not set
# CONFIG_FREERTOS_USE_TICK_HOOK is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
# end of Kernel
#
# Port
#
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
CONFIG_FREERTOS_ISR_STACKSIZE=1536
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT is not set
# end of Port
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# end of FreeRTOS
#
......@@ -636,7 +689,7 @@ CONFIG_FREERTOS_DEBUG_OCDAWARE=y
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_HAL_ASSERTION_SILENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
......@@ -653,18 +706,6 @@ CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Heap memory debugging
#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# end of jsmn
#
# libsodium
#
# end of libsodium
#
# Log output
#
......@@ -684,147 +725,6 @@ CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output
#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
# CONFIG_LWIP_SO_RCVBUF is not set
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
# CONFIG_LWIP_IP_FORWARD is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCP_OPTIONS_LEN=68
#
# DHCP server
#
CONFIG_LWIP_DHCPS=y
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV6=y
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=12
CONFIG_LWIP_TCP_MSS=1440
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
# CONFIG_LWIP_TCP_SACK_OUT is not set
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=1500
# end of TCP
#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP
#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums
CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_LWIP_PPP_SUPPORT is not set
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
# CONFIG_LWIP_SLIP_SUPPORT is not set
#
# ICMP
#
CONFIG_LWIP_ICMP=y
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP
#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API
#
# SNTP
#
CONFIG_LWIP_SNTP_MAX_SERVERS=1
# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP
CONFIG_LWIP_ESP_LWIP_ASSERT=y
#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# end of Hooks
# CONFIG_LWIP_DEBUG is not set
# end of LWIP
#
# mbedTLS
#
......@@ -837,6 +737,16 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set
#
# mbedTLS v3.x related
#
# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set
# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
# end of mbedTLS v3.x related
#
# Certificate Bundle
#
......@@ -845,6 +755,7 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
# end of Certificate Bundle
# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
......@@ -852,11 +763,13 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_MBEDTLS_ROM_MD5=y
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
......@@ -873,7 +786,6 @@ CONFIG_MBEDTLS_TLS_ENABLED=y
#
# CONFIG_MBEDTLS_PSK_MODES is not set
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
......@@ -882,16 +794,11 @@ CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y
CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
#
......@@ -900,9 +807,6 @@ CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
......@@ -922,6 +826,7 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates
CONFIG_MBEDTLS_ECP_C=y
# CONFIG_MBEDTLS_DHM_C is not set
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
......@@ -946,37 +851,6 @@ CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y
# CONFIG_MBEDTLS_SECURITY_RISKS is not set
# end of mbedTLS
#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
# CONFIG_MDNS_STRICT_MODE is not set
CONFIG_MDNS_TIMER_PERIOD_MS=100
# CONFIG_MDNS_NETWORKING_SOCKET is not set
CONFIG_MDNS_MULTIPLE_INSTANCE=y
# end of mDNS
#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations
#
# Newlib
#
......@@ -987,28 +861,12 @@ CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set
# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set
# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set
# end of Newlib
#
# NVS
#
# end of NVS
#
# OpenSSL
#
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ERROR_STACK=y
# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
CONFIG_OPENSSL_ASSERT_EXIT=y
# end of OpenSSL
#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set
# end of OpenThread
#
# PThreads
#
......@@ -1025,11 +883,11 @@ CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_HAS_ROM_IMPL=y
# CONFIG_SPI_FLASH_ROM_IMPL is not set
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
......@@ -1041,6 +899,13 @@ CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
#
# SPI Flash behavior when brownout
#
CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y
CONFIG_SPI_FLASH_BROWNOUT_RESET=y
# end of SPI Flash behavior when brownout
#
# Auto-detect flash chips
#
......@@ -1049,124 +914,15 @@ CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
# end of Auto-detect flash chips
CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver
#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3
#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y
#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration
#
# TCP Transport
#
#
# Websocket
#
CONFIG_WS_TRANSPORT=y
CONFIG_WS_BUFFER_SIZE=1024
# end of Websocket
# end of TCP Transport
#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library
#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_VFS_SUPPORT_TERMIOS=y
#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system
#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling
#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# end of Wi-Fi Provisioning Manager
#
# Supplicant
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_SUITE_B_192 is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
# CONFIG_WPA_WPS_STRICT is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# end of Supplicant
# end of Component config
#
# Compatibility options
#
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# end of Compatibility options
# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="riscv32-esp-elf-"
# CONFIG_NO_BLOBS is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
......@@ -1180,16 +936,10 @@ CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
......@@ -1201,87 +951,61 @@ CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
CONFIG_ESP_SYSTEM_PD_FLASH=y
CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
CONFIG_IPC_TASK_STACK_SIZE=1536
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y
CONFIG_ESP32H2_MEMPROT_FEATURE=y
CONFIG_ESP32H2_MEMPROT_FEATURE_LOCK=y
# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_ESP32C3_MEMPROT_FEATURE=y
CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK=y
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_CONSOLE_UART_NONE is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
# CONFIG_INT_WDT is not set
# CONFIG_TASK_WDT is not set
# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
# CONFIG_ESP32C3_DEBUG_OCDAWARE is not set
CONFIG_BROWNOUT_DET=y
CONFIG_ESP32C3_BROWNOUT_DET=y
CONFIG_ESP32C3_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_7=y
CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set
CONFIG_BROWNOUT_DET_LVL=7
CONFIG_ESP32C3_BROWNOUT_DET_LVL=7
CONFIG_IPC_TASK_STACK_SIZE=1536
CONFIG_TIMER_TASK_STACK_SIZE=3584
# CONFIG_EXTERNAL_COEX_ENABLE is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
# CONFIG_MB_TIMER_PORT_ENABLED is not set
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=12
CONFIG_TCP_MSS=1440
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_ESP32_PTHREAD_STACK_MIN=768
......@@ -1290,8 +1014,4 @@ CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# End of deprecated options
tools/building.py
浏览文件 @ cb7fd304
......@@ -186,7 +186,8 @@ def PrepareBuilding(env, root_directory, has_libcpu=False, remove_components = [
'cmake':('gcc', 'gcc'),
'cmake-armclang':('keil', 'armclang'),
'xmake':('gcc', 'gcc'),
'codelite' : ('gcc', 'gcc')}
'codelite' : ('gcc', 'gcc'),
'esp-idf': ('gcc', 'gcc')}
tgt_name = GetOption('target')
if tgt_name:
......@@ -857,10 +858,16 @@ def GenTargetProject(program = None):
if GetOption('target') == 'cmake' or GetOption('target') == 'cmake-armclang':
from cmake import CMakeProject
CMakeProject(Env,Projects)
if GetOption('target') == 'xmake':
from xmake import XMakeProject
XMakeProject(Env, Projects)
if GetOption('target') == 'esp-idf':
from esp_idf import ESPIDFProject
ESPIDFProject(Env, Projects)
exit(0)
def EndBuilding(target, program = None):
need_exit = False
......
tools/esp_idf.py 0 → 100644
浏览文件 @ cb7fd304
import os
import re
import utils
from utils import _make_path_relative
def GenerateCFiles(env,project):
"""
Generate CMakeLists.txt files
"""
info = utils.ProjectInfo(env)
init_export = []
main_component_dir = os.path.join(os.getcwd(), 'main')
cm_file = open(os.path.join(main_component_dir, 'CMakeLists.txt'), 'w')
if cm_file:
cm_file.write("idf_component_register(\n")
cm_file.write("\tSRCS\n")
for group in project:
for f in group['src']:
path = _make_path_relative(main_component_dir, os.path.normpath(f.rfile().abspath))
cm_file.write( "\t" + path.replace("\\", "/") + "\n" )
src = open(f.rfile().abspath, 'r')
for line in src.readlines():
if re.match('INIT_(BOARD|PREV|DEVICE|COMPONENT|ENV|APP)_EXPORT\(.+\)', line):
init_export.append(re.search('\(.+\)', line).group(0)[1:-1])
src.close()
cm_file.write("\n")
cm_file.write("\tINCLUDE_DIRS\n")
for i in info['CPPPATH']:
path = _make_path_relative(main_component_dir, i)
cm_file.write( "\t" + path.replace("\\", "/") + "\n")
cm_file.write(")\n\n")
print(init_export)
n = len(init_export)
if n:
cm_file.write("target_link_libraries(${COMPONENT_LIB}\n")
for i in range(n):
cm_file.write("\tINTERFACE \"-u __rt_init_" + init_export[i] + "\"\n")
cm_file.write(")\n")
def ESPIDFProject(env,project):
print('Update setting files for CMakeLists.txt...')
GenerateCFiles(env,project)
print('Done!')
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或