diff --git a/bsp/ESP32_C3/.config b/bsp/ESP32_C3/.config index e39503d2c9f9ed9ff5aaf768c63f25698c56f4ed..0fbb456ad904c7412bb39190a802829c60dbd514 100644 --- a/bsp/ESP32_C3/.config +++ b/bsp/ESP32_C3/.config @@ -19,7 +19,9 @@ CONFIG_RT_TICK_PER_SECOND=1000 # CONFIG_RT_USING_HOOK is not set # CONFIG_RT_USING_IDLE_HOOK is not set CONFIG_IDLE_THREAD_STACK_SIZE=256 -# CONFIG_RT_USING_TIMER_SOFT is not set +CONFIG_RT_USING_TIMER_SOFT=y +CONFIG_RT_TIMER_THREAD_PRIO=4 +CONFIG_RT_TIMER_THREAD_STACK_SIZE=512 # # kservice optimization @@ -65,7 +67,7 @@ CONFIG_RT_USING_DEVICE=y CONFIG_RT_USING_CONSOLE=y CONFIG_RT_CONSOLEBUF_SIZE=256 CONFIG_RT_CONSOLE_DEVICE_NAME="uart" -CONFIG_RT_VER_NUM=0x40101 +CONFIG_RT_VER_NUM=0x50000 # CONFIG_RT_USING_CPU_FFS is not set # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set @@ -405,6 +407,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 # CONFIG_PKG_USING_HASH_MATCH is not set # CONFIG_PKG_USING_FIRE_PID_CURVE is not set # CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set +# CONFIG_PKG_USING_VOFA_PLUS is not set # # system packages @@ -440,7 +443,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 # CONFIG_PKG_USING_UC_CLK is not set # CONFIG_PKG_USING_UC_COMMON is not set # CONFIG_PKG_USING_UC_MODBUS is not set -# CONFIG_PKG_USING_RTDUINO is not set CONFIG_PKG_USING_FREERTOS_WRAPPER=y CONFIG_PKG_FREERTOS_WRAPPER_PATH="/packages/system/FreeRTOS_Wrapper" CONFIG_PKG_USING_FREERTOS_WRAPPER_LATEST_VERSION=y @@ -478,6 +480,7 @@ CONFIG_PKG_FREERTOS_WRAPPER_VER="latest" # CONFIG_PKG_USING_KMULTI_RTIMER is not set # CONFIG_PKG_USING_TFDB is not set # CONFIG_PKG_USING_QPC is not set +# CONFIG_PKG_USING_AGILE_UPGRADE is not set # # peripheral libraries and drivers @@ -646,6 +649,39 @@ CONFIG_PKG_ESP_IDF_VER="latest" # CONFIG_PKG_USING_MFBD is not set # CONFIG_PKG_USING_SLCAN2RTT is not set # CONFIG_PKG_USING_SOEM is not set +# CONFIG_PKG_USING_QPARAM is not set + +# +# Arduino libraries +# +# CONFIG_PKG_USING_RTDUINO is not set + +# +# Sensor libraries +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set +# CONFIG_PKG_USING_ARDUINO_DHT_SENSOR is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set +# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set + +# +# Display libraries +# +# CONFIG_PKG_USING_ARDUINO_U8G2 is not set + +# +# Timing libraries +# +# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set + +# +# Project libraries +# +# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set +# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set CONFIG_SOC_ESPRESSIF=y CONFIG_SOC_ESP32_C3=y diff --git a/bsp/ESP32_C3/CMakeLists.txt b/bsp/ESP32_C3/CMakeLists.txt index 0c4ba04a556cc7dad244ec9d836ec814f613d1d6..8c321af8d4011f97c7a977734d7d3ad5f2523f8b 100644 --- a/bsp/ESP32_C3/CMakeLists.txt +++ b/bsp/ESP32_C3/CMakeLists.txt @@ -1,6 +1,6 @@ # The following lines of boilerplate have to be in your project's # CMakeLists in this exact order for cmake to work correctly -cmake_minimum_required(VERSION 3.5) - +cmake_minimum_required(VERSION 3.16) +set(COMPONENTS esptool_py main) include($ENV{IDF_PATH}/tools/cmake/project.cmake) project(rtthread) diff --git a/bsp/ESP32_C3/README.md b/bsp/ESP32_C3/README.md index 1911009d6f40c1aae747b8d18c3aa7766a0878c8..1fb7a5c787c37b5ce8d87cadd44d0313213df0e2 100644 --- a/bsp/ESP32_C3/README.md +++ b/bsp/ESP32_C3/README.md @@ -43,37 +43,33 @@ Each peripheral supporting condition for this BSP is as follows: | UART | Support | Using LUATOS_ESP32C3 development board requires connecting serial port to USB chip UART0_TX and UART0_RX (such as CP2102) | | JTAG debug | Support | ESP32C3 usb-linked development boards can be debugged | -## Quickly Get Started - -First of all, we'll need to build the IDE, Espressif officially recommends the IDF. -When installing the IDF, please select version 4.4. If you are familiar with the official IDF command line, you can also use the command line to perform the `idf.py build` directly in the `bsp/esp32_c3`, which has been tested and proved that it's functional - -### ESP-IDF Adds RT-Thread patch - -The IDF was running the FreeRTOS, so we'll need a few modifications to get to RT-Thread. -Copy the `rtt.patch` file to the IDF code directory, and then execute the next few commands on the `git bash` command line to mark the patch. +## Quick Start Guide +1. Download ESP-IDF package ``` -cd esp/esp-idf -git checkout v4.4 -git am rtt.patch +pkgs --update ``` - -If you don't want to use the patch file and have uploaded the code to GitHub, you can now go to [tangzz98/esp-idf](tangzz98/esp-idf) to download the latest `freertos_wrapper` branch code. After the modification, the original IDF example is still kept in normal use, they won't interfere with each other. - -#### Compile and Download - -Right-click `bsp/ESP32_C3` and use vscode to open the project - -Compile and select the button at the bottom: - -![build](images/build.png) - -Here we usually use the serial port to download, you need to choose the corresponding serial port according to your own development board (if there is JTAG, you can also use JTAG to download and debug) - -![](images/burn.png) - -Once the project is successfully downloaded, the system runs automatically, the red LED will blink in 1s on cycles. +2. Go to ESP-IDF package directory and install IDF tools. This command only needs to be run once after the package is downloaded for the first time. +``` +cd packages/ESP-IDF-latest +./install.sh +# Use install.bat in Windows environment +``` +3. Under the ESP-IDF package directory, export IDF environment variables. This commands need to be run every time when the BSP is built in a new terminal. +``` +. export.sh +# Use export.bat in Windows environment +``` +4. Configure RT-Thread under the BSP directory +``` +scons --menuconfig +``` +5. Whenever RT-Thread configuration is changed with `scons --menuconfig`, a new `CMakeLists.txt` needs to be generated with the command below +``` +scons --target=esp-idf +``` +6. Use `idf.py` to compile and upload the program. Refer to [Espressif official documents](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html#build-your-first-project) for reference. +7. Once the project is successfully downloaded, the system runs automatically, the red LED will blink in 1s on cycles. ## Notes @@ -83,6 +79,7 @@ Once the project is successfully downloaded, the system runs automatically, the Maintainer: - [supperthomas](https://github.com/supperthomas) email address: [78900636@qq.com](mailto:78900636@qq.com) +- [tangzz98](https://github.com/tangzz98) email address: [tangz98@outlook.com](tangz98@outlook.com) Special thanks to [chenyingchun0312](https://github.com/chenyingchun0312) for providing support on the RISC-V part working. diff --git a/bsp/ESP32_C3/README_ZH.md b/bsp/ESP32_C3/README_ZH.md index 41a693a2fdb96bac742ec43ebac7a0a50365bd42..6502a01260589b1acfdfa999189e1ae8fb990f4a 100644 --- a/bsp/ESP32_C3/README_ZH.md +++ b/bsp/ESP32_C3/README_ZH.md @@ -52,50 +52,42 @@ ## 使用说明 -### 快速上手 - -先要搭建IDE开发环境，乐鑫官方推荐使用IDF开发，这边建议使用vscode插件。 - -IDF的搭建方法有很多种，尝试了很多种方法之后，总结了一个比较好用的方法，并且可以使用vscode跨平台安装，非常简单方便，具体方法见链接[ESP-IDF 一键式搭建环境基于VSCODE](https://blog.csdn.net/lt6210925/article/details/123699249)。 安装的时候IDF版本请选择IDF 4.4版本。如果你对官方IDF命令行的方式熟悉的话，你也可以使用命令行的方式，直接在`bsp/esp32_c3`中执行`idf.py build`即可，这边已经测试过，是可以使用的。 - -### ESP-IDF 添加RT-THREAD patch - -由于IDF使用的是FREERTOS，如果需要使用rt-thread就需要修改一些文件。将`rtt.patch` 这个文件拷贝到IDF的代码目录下面，然后在`git bash`命令行内执行命令下面几条命令就可以打上patch - +1. 下载ESP-IDF软件包 ``` -cd esp/esp-idf -git checkout v4.4 -git am rtt.patch +pkgs --update ``` - -如果不想用patch文件，已经将代码上传到github上面，可以进入[tangzz98/esp-idf](https://github.com/tangzz98/esp-idf/tree/freertos_wrapper) 下载最新的freertos_wrapper分支代码即可。修改之后的IDF，原来的IDF的example还是正常使用，互不干扰，可以放心使用。 - -#### 编译下载 - - 在`bsp/ESP32_C3`中右击，然后使用vscode打开工程 - -编译选择最下面的按钮即可： - -![build](images/build.png) - -这边通常采用串口下载，需要根据你自己开发板选择对应的串口（如果有JTAG的，也可以用JTAG下载和调试） - -![burn](images/burn.png) - -#### 运行结果 - -下载程序成功之后，系统会运行，红色的 LED灯以 1S 周期闪烁。 -感兴趣的可以通过公众号`Thomas的小火车`来联系 +2. 进入到ESP-IDF软件包路径，安装IDf工具链。此命令只需要在下载完软件包后执行一次。 +``` +cd packages/ESP-IDF-latest +./install.sh +# Windows环境下使用install.bat +``` +3. 在软件包路径下设置IDF路径。每当在新的命令行编译BSP时需要执行此命令。 +``` +. export.sh +# Windows环境下使用export.bat +``` +4. 在BSP路径下配置RT-Thread +``` +scons --menuconfig +``` +5. 每当使用`scons --menuconfig`更改RT-Thread配置后需要重新生成`CMakeLists.txt`。 +``` +scons --target=esp-idf +``` +6. 使用`idf.py`命令编译，烧录。具体参考[乐鑫官网](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html#build-your-first-project) +7. 下载程序成功之后，系统会运行，红色的 LED灯以 1S 周期闪烁。 ## 注意事项 -- 目前RTTHREAD支持起来了，后续会需要继续完善一些其他功能，刚开始使用ESP32，欢迎小伙伴一起来讨论和贡献。 +- 目前RTTHREAD支持起来了，后续会需要继续完善一些其他功能，刚开始使用ESP32，欢迎小伙伴一起来讨论和贡献。感兴趣的可以通过公众号`Thomas的小火车`来联系 ## 联系人信息 维护人: - [supperthomas](https://github.com/supperthomas) 邮箱：<78900636@qq.com> +- [tangzz98](https://github.com/tangzz98) 邮箱： ## 特别感谢 diff --git a/bsp/ESP32_C3/SConscript b/bsp/ESP32_C3/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..fe0ae941ae9a759ae478de901caec1c961e56af8 --- /dev/null +++ b/bsp/ESP32_C3/SConscript @@ -0,0 +1,14 @@ +# for module compiling +import os +Import('RTT_ROOT') + +cwd = str(Dir('#')) +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/ESP32_C3/SConstruct b/bsp/ESP32_C3/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..7d17dc44b6f5286e8901b1b61f57d22dec185c46 --- /dev/null +++ b/bsp/ESP32_C3/SConstruct @@ -0,0 +1,32 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.join(os.getcwd(), '..', '..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +from building import * + +TARGET = 'rtthread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS, + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) +env['ASCOM'] = env['ASPPCOM'] + +Export('RTT_ROOT') +Export('rtconfig') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, remove_components = ['libc']) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/ESP32_C3/drivers/SConscript b/bsp/ESP32_C3/drivers/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..a67eba3b0f56269b8d98fb90dccb5b8901194266 --- /dev/null +++ b/bsp/ESP32_C3/drivers/SConscript @@ -0,0 +1,11 @@ +import os +from building import * + +cwd = GetCurrentDir() +src = Glob('*.c') + +CPPPATH = [cwd] + +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/ESP32_C3/drivers/board.c b/bsp/ESP32_C3/drivers/board.c new file mode 100644 index 0000000000000000000000000000000000000000..fe82129bc10ab54bd1be6bb37ad01bac3d011122 --- /dev/null +++ b/bsp/ESP32_C3/drivers/board.c @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2021-2022, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2022-06-02 supperthomas first version + */ + +#include +#include "hal/systimer_hal.h" +#include "hal/systimer_ll.h" +#include "esp_private/panic_internal.h" +#include "esp_private/systimer.h" +#include "esp_private/periph_ctrl.h" +#include "esp_intr_alloc.h" +#include "esp_attr.h" + +static systimer_hal_context_t systimer_hal; +IRAM_ATTR void rt_SysTickIsrHandler(void *arg) +{ + systimer_ll_clear_alarm_int(systimer_hal.dev, SYSTIMER_LL_ALARM_OS_TICK_CORE0); + rt_interrupt_enter(); + rt_tick_increase(); + rt_interrupt_leave(); +} + +void rt_hw_systick_init(void) +{ + esp_intr_alloc(ETS_SYSTIMER_TARGET0_EDGE_INTR_SOURCE, ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1, rt_SysTickIsrHandler, &systimer_hal, NULL); + periph_module_enable(PERIPH_SYSTIMER_MODULE); + systimer_hal_init(&systimer_hal); + systimer_hal_tick_rate_ops_t ops = { + .ticks_to_us = systimer_ticks_to_us, + .us_to_ticks = systimer_us_to_ticks, + }; + systimer_hal_set_tick_rate_ops(&systimer_hal, &ops); + systimer_ll_set_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK, 0); + systimer_ll_apply_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK); + systimer_hal_connect_alarm_counter(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, SYSTIMER_LL_COUNTER_OS_TICK); + systimer_hal_set_alarm_period(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, 1000000UL / RT_TICK_PER_SECOND); + systimer_hal_select_alarm_mode(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0, SYSTIMER_ALARM_MODE_PERIOD); + systimer_hal_counter_can_stall_by_cpu(&systimer_hal, 1, 0, true); + systimer_hal_enable_alarm_int(&systimer_hal, SYSTIMER_LL_ALARM_OS_TICK_CORE0); + systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK); +} + +void rt_hw_board_init(void) +{ + rt_hw_systick_init(); + /* Board underlying hardware initialization */ +#ifdef RT_USING_COMPONENTS_INIT + rt_components_board_init(); +#endif +#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE) + rt_console_set_device(RT_CONSOLE_DEVICE_NAME); +#endif +} diff --git a/bsp/ESP32_C3/main/board.h b/bsp/ESP32_C3/drivers/board.h similarity index 86% rename from bsp/ESP32_C3/main/board.h rename to bsp/ESP32_C3/drivers/board.h index c069ae3dee8970e50652475190271ff7df7d5afb..1f152ced85a306f2839b37dae25f5f73a340b7e9 100644 --- a/bsp/ESP32_C3/main/board.h +++ b/bsp/ESP32_C3/drivers/board.h @@ -11,13 +11,13 @@ #ifndef __BOARD_H__ #define __BOARD_H__ -#include -#include "drv_gpio.h" +#include #ifdef __cplusplus extern "C" { #endif +void rt_hw_board_init(void); #ifdef __cplusplus } diff --git a/bsp/ESP32_C3/main/drv_gpio.c b/bsp/ESP32_C3/drivers/drv_gpio.c similarity index 94% rename from bsp/ESP32_C3/main/drv_gpio.c rename to bsp/ESP32_C3/drivers/drv_gpio.c index 38525997323925c930e4ae052ff44efee4fca917..7f45656288c6298b225cb6af5fbc0455ed38ccd4 100644 --- a/bsp/ESP32_C3/main/drv_gpio.c +++ b/bsp/ESP32_C3/drivers/drv_gpio.c @@ -9,14 +9,11 @@ * */ -#include "drv_gpio.h" -#include -#ifdef RT_USING_PIN - -#define DBG_LEVEL DBG_LOG -#define LOG_TAG "drv.gpio" -#include +#include +#include +#include "driver/gpio.h" +#ifdef RT_USING_PIN static void mcu_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value) { @@ -97,5 +94,4 @@ int rt_hw_pin_init(void) } INIT_BOARD_EXPORT(rt_hw_pin_init); - #endif /* RT_USING_PIN */ diff --git a/bsp/ESP32_C3/main/drv_gpio.h b/bsp/ESP32_C3/drivers/drv_gpio.h similarity index 73% rename from bsp/ESP32_C3/main/drv_gpio.h rename to bsp/ESP32_C3/drivers/drv_gpio.h index 8c43506308abeb9841876bbd47917909f329e39d..01edcc41fd91be14d6de04d5fcf9beaeebdc5d63 100644 --- a/bsp/ESP32_C3/main/drv_gpio.h +++ b/bsp/ESP32_C3/drivers/drv_gpio.h @@ -12,16 +12,10 @@ #ifndef __DRV_GPIO_H__ #define __DRV_GPIO_H__ -#include -#include - -#ifdef RT_USING_DEVICE -#include -#endif - -#include "driver/gpio.h" - +#include +#ifdef RT_USING_PIN int rt_hw_pin_init(void); +#endif #endif /* __DRV_GPIO_H__ */ diff --git a/bsp/ESP32_C3/main/drv_uart.c b/bsp/ESP32_C3/drivers/drv_uart.c similarity index 96% rename from bsp/ESP32_C3/main/drv_uart.c rename to bsp/ESP32_C3/drivers/drv_uart.c index f2bc7c486e7fcb38d9736a03505899378bc6fdbc..58bac211f2f0bb2327d8af8e7a86189e77f88f08 100644 --- a/bsp/ESP32_C3/main/drv_uart.c +++ b/bsp/ESP32_C3/drivers/drv_uart.c @@ -9,7 +9,11 @@ * */ -#include "drv_uart.h" +#include +#include +#include "driver/uart.h" +#include "hal/uart_hal.h" +#include "sdkconfig.h" #ifdef RT_USING_SERIAL_V1 diff --git a/bsp/ESP32_C3/main/drv_uart.h b/bsp/ESP32_C3/drivers/drv_uart.h similarity index 66% rename from bsp/ESP32_C3/main/drv_uart.h rename to bsp/ESP32_C3/drivers/drv_uart.h index 26ee4ef30a2c3dbe47fc428e6cb3dfa8ac13e98c..f47a29b116a39a512f0cf3d4c9eedd6db45fe70f 100644 --- a/bsp/ESP32_C3/main/drv_uart.h +++ b/bsp/ESP32_C3/drivers/drv_uart.h @@ -12,17 +12,10 @@ #ifndef __DRV_UART_H__ #define __DRV_UART_H__ -#include -#include - -#ifdef RT_USING_DEVICE -#include -#endif - -#include "driver/uart.h" -#include "hal/uart_hal.h" -#include "sdkconfig.h" +#include +#ifdef RT_USING_SERIAL_V1 int rt_hw_uart_init(void); +#endif #endif /* __DRV_UART_H__ */ diff --git a/bsp/ESP32_C3/main/CMakeLists.txt b/bsp/ESP32_C3/main/CMakeLists.txt index 55b74d21179757af5d0901104ca52f1f260b8050..143809bb18f542ce3a31d3e412c5f9825567fe23 100644 --- a/bsp/ESP32_C3/main/CMakeLists.txt +++ b/bsp/ESP32_C3/main/CMakeLists.txt @@ -1,49 +1,50 @@ -idf_component_register(SRCS "board.c" "main.c" - "drv_gpio.c" - "drv_uart.c" - "../../../libcpu/risc-v/common/cpuport.c" - "../../../libcpu/risc-v/common/context_gcc.S" - "../../../src/components.c" - "../../../src/scheduler.c" - "../../../src/device.c" - "../../../src/clock.c" - "../../../src/irq.c" - "../../../src/thread.c" - "../../../src/mempool.c" - "../../../src/ipc.c" - "../../../src/mem.c" - "../../../src/object.c" - "../../../src/idle.c" - "../../../src/timer.c" - "../../../src/kservice.c" - "../../../src/device.c" - "../../../components/drivers/misc/pin.c" - "../../../components/drivers/ipc/pipe.c" - "../../../components/drivers/ipc/ringblk_buf.c" - "../../../components/drivers/ipc/waitqueue.c" - "../../../components/drivers/ipc/completion.c" - "../../../components/drivers/ipc/dataqueue.c" - "../../../components/drivers/ipc/ringbuffer.c" - "../../../components/drivers/ipc/workqueue.c" - "../../../components/drivers/serial/serial.c" - "../../../components/finsh/cmd.c" - "../../../components/finsh/msh_file.c" - "../../../components/finsh/msh_parse.c" - "../../../components/finsh/msh.c" - "../../../components/finsh/shell.c" +idf_component_register( + SRCS + ../../../libcpu/risc-v/common/cpuport.c + ../../../libcpu/risc-v/common/context_gcc.S + ../../../components/drivers/ipc/completion.c + ../../../components/drivers/ipc/dataqueue.c + ../../../components/drivers/ipc/pipe.c + ../../../components/drivers/ipc/ringblk_buf.c + ../../../components/drivers/ipc/ringbuffer.c + ../../../components/drivers/ipc/waitqueue.c + ../../../components/drivers/ipc/workqueue.c + ../../../components/drivers/misc/pin.c + ../../../components/drivers/serial/serial.c + ../drivers/drv_uart.c + ../drivers/board.c + ../drivers/drv_gpio.c + ../../../components/finsh/shell.c + ../../../components/finsh/msh.c + ../../../components/finsh/msh_parse.c + ../../../components/finsh/cmd.c + ../../../src/clock.c + ../../../src/components.c + ../../../src/device.c + ../../../src/idle.c + ../../../src/ipc.c + ../../../src/irq.c + ../../../src/kservice.c + ../../../src/mem.c + ../../../src/mempool.c + ../../../src/object.c + ../../../src/scheduler.c + ../../../src/thread.c + ../../../src/timer.c + main.c - INCLUDE_DIRS - "../../../components/drivers/include/drivers" + INCLUDE_DIRS + ../../../libcpu/risc-v/common + ../../../components/drivers/include + ../drivers + ../../../components/finsh + .. + ../../../include +) - "../../../components/drivers/include" - "../../../components/finsh" - "." - "../../../include" - "../../../libcpu/risc-v/common" - "../") -ADD_DEFINITIONS( - -D__RTTHREAD__ +target_link_libraries(${COMPONENT_LIB} + INTERFACE "-u __rt_init_rt_work_sys_workqueue_init" + INTERFACE "-u __rt_init_rt_hw_uart_init" + INTERFACE "-u __rt_init_rt_hw_pin_init" + INTERFACE "-u __rt_init_finsh_system_init" ) -#TODO -#list(APPEND LINK_FLAGS "-u __rt_init_desc_rt_hw_pin_init") -#set(compile_options "-u __rt_init_desc_rt_hw_pin_init") \ No newline at end of file diff --git a/bsp/ESP32_C3/main/SConscript b/bsp/ESP32_C3/main/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..08cf86dd8e56ed276ea809f9ea8c36038755ff65 --- /dev/null +++ b/bsp/ESP32_C3/main/SConscript @@ -0,0 +1,11 @@ +import os +from building import * + +cwd = GetCurrentDir() +src = Glob('*.c') + +CPPPATH = [] + +group = DefineGroup('Main', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/ESP32_C3/main/board.c b/bsp/ESP32_C3/main/board.c deleted file mode 100644 index 9dd7c7725c3902db66b6c395b3fe16947f32efb6..0000000000000000000000000000000000000000 --- a/bsp/ESP32_C3/main/board.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Copyright (c) 2021-2022, RT-Thread Development Team - * - * SPDX-License-Identifier: Apache-2.0 - * - * Change Logs: - * Date Author Notes - * 2022-06-02 supperthomas first version - */ - -#include - -#include "esp_private/panic_internal.h" -#include "hal/uart_hal.h" -#include "driver/timer.h" -#include "soc/periph_defs.h" -#include "hal/systimer_hal.h" -#include "hal/systimer_ll.h" -#include "esp_intr_alloc.h" - -#include "rtthread.h" -#include "rthw.h" -#include "drv_gpio.h" -#include "drv_uart.h" -#include "shell.h" - -#ifdef RT_USING_COMPONENTS_INIT -/* - * Components Initialization will initialize some driver and components as following - * order: - * rti_start --> 0 - * BOARD_EXPORT --> 1 - * rti_board_end --> 1.end - * - * DEVICE_EXPORT --> 2 - * COMPONENT_EXPORT --> 3 - * FS_EXPORT --> 4 - * ENV_EXPORT --> 5 - * APP_EXPORT --> 6 - * - * rti_end --> 6.end - * - * These automatically initialization, the driver or component initial function must - * be defined with: - * INIT_BOARD_EXPORT(fn); - * INIT_DEVICE_EXPORT(fn); - * ... - * INIT_APP_EXPORT(fn); - * etc. - */ -static int rti_start(void) -{ - return 0; -} -INIT_EXPORT(rti_start, "0"); - -static int rti_board_start(void) -{ - return 0; -} -INIT_EXPORT(rti_board_start, "0.end"); - -static int rti_board_end(void) -{ - return 0; -} -INIT_EXPORT(rti_board_end, "1.end"); - -static int rti_end(void) -{ - return 0; -} -INIT_EXPORT(rti_end, "6.end"); - -/** - * @brief Onboard components initialization. In this function, the board-level - * initialization function will be called to complete the initialization - * of the on-board peripherals. - */ -void rt_components_board_init(void) -{ -#if RT_DEBUG_INIT - int result; - const struct rt_init_desc *desc; - for (desc = &__rt_init_desc_rti_board_start; desc < &__rt_init_desc_rti_board_end; desc ++) - { - rt_kprintf("rt_components_board_init initialize %s", desc->fn_name); - result = desc->fn(); - rt_kprintf(":%d done\n", result); - } -#else - volatile const init_fn_t *fn_ptr; - - for (fn_ptr = &__rt_init_rti_board_start; fn_ptr < &__rt_init_rti_board_end; fn_ptr++) - { - (*fn_ptr)(); - } -#endif /* RT_DEBUG_INIT */ -} - -/** - * @brief RT-Thread Components Initialization. - */ -void rt_components_init(void) -{ -#if RT_DEBUG_INIT - int result; - const struct rt_init_desc *desc; - - rt_kprintf("do components initialization.\n"); - for (desc = &__rt_init_desc_rti_board_end; desc < &__rt_init_desc_rti_end; desc ++) - { - rt_kprintf("rt_components_init initialize %s", desc->fn_name); - result = desc->fn(); - rt_kprintf(":%d done\n", result); - } -#else - volatile const init_fn_t *fn_ptr; - - for (fn_ptr = &__rt_init_rti_board_end; fn_ptr < &__rt_init_rti_end; fn_ptr ++) - { - (*fn_ptr)(); - } -#endif /* RT_DEBUG_INIT */ -} -#endif /* RT_USING_COMPONENTS_INIT */ - - - - -void main_thread_entry(void *parameter) -{ -#ifdef RT_USING_COMPONENTS_INIT - /* RT-Thread components initialization */ - rt_components_init(); -#endif /* RT_USING_COMPONENTS_INIT */ - - extern int rtt_main(); - rtt_main(); - -} - -void rt_application_init(void) -{ - rt_thread_t tid; - -#define RT_MAIN_THREAD_STACK_SIZE 2048 -#define RT_MAIN_THREAD_PRIORITY 10 - - tid = rt_thread_create("main", main_thread_entry, RT_NULL, - RT_MAIN_THREAD_STACK_SIZE, RT_MAIN_THREAD_PRIORITY, 20); - RT_ASSERT(tid != RT_NULL); - - rt_thread_startup(tid); -} - -//component -static uint32_t uwTick = 0; -static systimer_hal_context_t systimer_hal; -IRAM_ATTR void rt_SysTickIsrHandler(void *arg) -{ - systimer_ll_clear_alarm_int(systimer_hal.dev, 1); - rt_interrupt_enter(); - - rt_tick_increase(); - uwTick++; - /* leave interrupt */ - rt_interrupt_leave(); - systimer_ll_is_alarm_int_fired(systimer_hal.dev, 1); -} - -void rt_hw_systick_init(void) -{ - uint8_t system_timer_counter=1; - - //rt_hw_interrupt_enable(0); - esp_intr_alloc(ETS_SYSTIMER_TARGET1_EDGE_INTR_SOURCE, ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1, rt_SysTickIsrHandler, &systimer_hal, NULL); - systimer_hal_init(&systimer_hal); - systimer_ll_set_counter_value(systimer_hal.dev, system_timer_counter, 0); - systimer_ll_apply_counter_value(systimer_hal.dev, system_timer_counter); - uint32_t alarm_id = 1 ; - systimer_hal_connect_alarm_counter(&systimer_hal, alarm_id, system_timer_counter); - systimer_hal_set_alarm_period(&systimer_hal, alarm_id, 1000000UL / 1000); - systimer_hal_select_alarm_mode(&systimer_hal, alarm_id, SYSTIMER_ALARM_MODE_PERIOD); - systimer_hal_counter_can_stall_by_cpu(&systimer_hal, 1, 0, true); - systimer_hal_enable_alarm_int(&systimer_hal, alarm_id); - - systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK); -} -void rt_hw_board_init(void) -{ - rt_hw_systick_init(); - /* Board underlying hardware initialization */ -#ifdef RT_USING_COMPONENTS_INIT - rt_components_board_init(); -#endif -#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE) - rt_console_set_device(RT_CONSOLE_DEVICE_NAME); -#endif -} - -static void rtthread_startup(void) -{ - rt_hw_interrupt_disable(); - /* init board */ - rt_hw_board_init(); - - /* timer system initialization */ - rt_system_timer_init(); - - /* create init_thread */ - rt_application_init(); - - /* timer thread initialization */ - rt_system_timer_thread_init(); - - /* idle thread initialization */ - rt_thread_idle_init(); - - /* start scheduler */ - rt_system_scheduler_start(); - /* init scheduler system */ - rt_hw_pin_init(); - rt_hw_uart_init(); - finsh_system_init(); - /* never reach here */ - return ; -} - -void app_main(void) -{ - /* startup RT-Thread RTOS */ - rtthread_startup(); - return; -} diff --git a/bsp/ESP32_C3/main/main.c b/bsp/ESP32_C3/main/main.c index 22d8c8d513eec26d619372aabe0fbcda828e4dd0..4f352bacbe735222e793ccd45f8ad691c6a98afc 100644 --- a/bsp/ESP32_C3/main/main.c +++ b/bsp/ESP32_C3/main/main.c @@ -13,10 +13,8 @@ #include #include -int rtt_main(void) +int main(void) { - /* show RT-Thread version */ - rt_show_version(); rt_kprintf("Hello!RT-THREAD!\r\n"); rt_pin_mode(RT_BSP_LED_PIN, PIN_MODE_OUTPUT); while (1) diff --git a/bsp/ESP32_C3/rtconfig.h b/bsp/ESP32_C3/rtconfig.h index 838a952b36917280466712b96b982a2d9480cb0d..fea81a32b35c29e8686b2f8c455af48d28cc5752 100644 --- a/bsp/ESP32_C3/rtconfig.h +++ b/bsp/ESP32_C3/rtconfig.h @@ -12,6 +12,9 @@ #define RT_THREAD_PRIORITY_MAX 32 #define RT_TICK_PER_SECOND 1000 #define IDLE_THREAD_STACK_SIZE 256 +#define RT_USING_TIMER_SOFT +#define RT_TIMER_THREAD_PRIO 4 +#define RT_TIMER_THREAD_STACK_SIZE 512 /* kservice optimization */ @@ -37,7 +40,7 @@ #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 256 #define RT_CONSOLE_DEVICE_NAME "uart" -#define RT_VER_NUM 0x40101 +#define RT_VER_NUM 0x50000 /* RT-Thread Components */ @@ -62,9 +65,10 @@ /* Device Drivers */ #define RT_USING_DEVICE_IPC -#define RT_USING_PIN #define RT_USING_SERIAL #define RT_USING_SERIAL_V1 +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN /* Using USB */ @@ -168,6 +172,21 @@ /* entertainment: terminal games and other interesting software packages */ + +/* Arduino libraries */ + + +/* Sensor libraries */ + + +/* Display libraries */ + + +/* Timing libraries */ + + +/* Project libraries */ + #define SOC_ESPRESSIF #define SOC_ESP32_C3 diff --git a/bsp/ESP32_C3/rtconfig.py b/bsp/ESP32_C3/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..3f16f226d4459f28b43dbdad4a7b81c6a07e8879 --- /dev/null +++ b/bsp/ESP32_C3/rtconfig.py @@ -0,0 +1,42 @@ +import os + +# toolchains options +ARCH ='risc-v' +CPU ='' +CROSS_TOOL ='gcc' + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') + +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'~/.espressif/tools/riscv32-esp-elf/esp-2022r1-11.2.0/riscv32-esp-elf/bin' +else: + print('Please make sure your toolchains is GNU GCC!') + exit(0) + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'riscv32-esp-elf-' + CC = PREFIX + 'gcc' + CXX = PREFIX + 'g++' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + STRIP = PREFIX + 'strip' + + CFLAGS = '' + AFLAGS = '' + LFLAGS = '' + CXXFLAGS = '' + + POST_ACTION = '' diff --git a/bsp/ESP32_C3/sdkconfig b/bsp/ESP32_C3/sdkconfig index bb0a7931a6e879956f8425a5cd295ad38fd4e9cd..dd189b63cf0d090ef9544d8c140a551b5905e2e2 100644 --- a/bsp/ESP32_C3/sdkconfig +++ b/bsp/ESP32_C3/sdkconfig @@ -2,20 +2,215 @@ # Automatically generated file. DO NOT EDIT. # Espressif IoT Development Framework (ESP-IDF) Project Configuration # +CONFIG_SOC_ADC_SUPPORTED=y +CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y +CONFIG_SOC_GDMA_SUPPORTED=y +CONFIG_SOC_TWAI_SUPPORTED=y +CONFIG_SOC_BT_SUPPORTED=y +CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y +CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y +CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y +CONFIG_SOC_XT_WDT_SUPPORTED=y +CONFIG_SOC_WIFI_SUPPORTED=y +CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y +CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y +CONFIG_SOC_EFUSE_HAS_EFUSE_RST_BUG=y +CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y +CONFIG_SOC_RTC_MEM_SUPPORTED=y +CONFIG_SOC_I2S_SUPPORTED=y +CONFIG_SOC_RMT_SUPPORTED=y +CONFIG_SOC_SDM_SUPPORTED=y +CONFIG_SOC_SYSTIMER_SUPPORTED=y +CONFIG_SOC_SUPPORT_COEXISTENCE=y +CONFIG_SOC_AES_SUPPORTED=y +CONFIG_SOC_MPI_SUPPORTED=y +CONFIG_SOC_SHA_SUPPORTED=y +CONFIG_SOC_HMAC_SUPPORTED=y +CONFIG_SOC_DIG_SIGN_SUPPORTED=y +CONFIG_SOC_FLASH_ENC_SUPPORTED=y +CONFIG_SOC_SECURE_BOOT_SUPPORTED=y +CONFIG_SOC_MEMPROT_SUPPORTED=y +CONFIG_SOC_XTAL_SUPPORT_40M=y +CONFIG_SOC_AES_SUPPORT_DMA=y +CONFIG_SOC_AES_GDMA=y +CONFIG_SOC_AES_SUPPORT_AES_128=y +CONFIG_SOC_AES_SUPPORT_AES_256=y +CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_ARBITER_SUPPORTED=y +CONFIG_SOC_ADC_FILTER_SUPPORTED=y +CONFIG_SOC_ADC_MONITOR_SUPPORTED=y +CONFIG_SOC_ADC_DMA_SUPPORTED=y +CONFIG_SOC_ADC_PERIPH_NUM=2 +CONFIG_SOC_ADC_MAX_CHANNEL_NUM=5 +CONFIG_SOC_ADC_ATTEN_NUM=4 +CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=1 +CONFIG_SOC_ADC_PATT_LEN_MAX=8 +CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4 +CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 +CONFIG_SOC_ADC_DIGI_FILTER_NUM=2 +CONFIG_SOC_ADC_DIGI_MONITOR_NUM=2 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=83333 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=611 +CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=12 +CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED=y +CONFIG_SOC_APB_BACKUP_DMA=y +CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y +CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y +CONFIG_SOC_CACHE_MEMORY_IBANK_SIZE=0x4000 +CONFIG_SOC_CPU_CORES_NUM=1 +CONFIG_SOC_CPU_INTR_NUM=32 +CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC=y +CONFIG_SOC_CPU_BREAKPOINTS_NUM=8 +CONFIG_SOC_CPU_WATCHPOINTS_NUM=8 +CONFIG_SOC_CPU_WATCHPOINT_SIZE=0x80000000 +CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=3072 +CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16 +CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100 +CONFIG_SOC_GDMA_GROUPS=1 +CONFIG_SOC_GDMA_PAIRS_PER_GROUP=3 +CONFIG_SOC_GDMA_TX_RX_SHARE_INTERRUPT=y +CONFIG_SOC_GPIO_PORT=1 +CONFIG_SOC_GPIO_PIN_COUNT=22 +CONFIG_SOC_GPIO_SUPPORTS_RTC_INDEPENDENT=y +CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y +CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP=y +CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK=0 +CONFIG_SOC_GPIO_SUPPORT_SLP_SWITCH=y +CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8 +CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8 +CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE=y +CONFIG_SOC_I2C_NUM=1 +CONFIG_SOC_I2C_FIFO_LEN=32 +CONFIG_SOC_I2C_SUPPORT_SLAVE=y +CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS=y +CONFIG_SOC_I2C_SUPPORT_XTAL=y +CONFIG_SOC_I2C_SUPPORT_RTC=y +CONFIG_SOC_I2S_NUM=y +CONFIG_SOC_I2S_HW_VERSION_2=y +CONFIG_SOC_I2S_SUPPORTS_PCM=y +CONFIG_SOC_I2S_SUPPORTS_PDM=y +CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y +CONFIG_SOC_I2S_SUPPORTS_PDM_CODEC=y +CONFIG_SOC_I2S_SUPPORTS_TDM=y +CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y +CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y +CONFIG_SOC_LEDC_CHANNEL_NUM=6 +CONFIG_SOC_LEDC_TIMER_BIT_WIDE_NUM=14 +CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y +CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 +CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 +CONFIG_SOC_RMT_GROUPS=1 +CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=2 +CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=2 +CONFIG_SOC_RMT_CHANNELS_PER_GROUP=4 +CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48 +CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y +CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y +CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y +CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y +CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y +CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y +CONFIG_SOC_RMT_SUPPORT_XTAL=y +CONFIG_SOC_RMT_SUPPORT_APB=y +CONFIG_SOC_RMT_SUPPORT_RC_FAST=y +CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128 +CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=108 +CONFIG_SOC_RTC_SLOW_CLOCK_SUPPORT_8MD256=y +CONFIG_SOC_RTCIO_PIN_COUNT=0 +CONFIG_SOC_RSA_MAX_BIT_LEN=3072 +CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968 +CONFIG_SOC_SHA_SUPPORT_DMA=y +CONFIG_SOC_SHA_SUPPORT_RESUME=y +CONFIG_SOC_SHA_GDMA=y +CONFIG_SOC_SHA_SUPPORT_SHA1=y +CONFIG_SOC_SHA_SUPPORT_SHA224=y +CONFIG_SOC_SHA_SUPPORT_SHA256=y +CONFIG_SOC_SDM_GROUPS=1 +CONFIG_SOC_SDM_CHANNELS_PER_GROUP=4 +CONFIG_SOC_SPI_PERIPH_NUM=2 +CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 +CONFIG_SOC_SPI_SUPPORT_DDRCLK=y +CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS=y +CONFIG_SOC_SPI_SUPPORT_CD_SIG=y +CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS=y +CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y +CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT=y +CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y +CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16 +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y +CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR=y +CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y +CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS=y +CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y +CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y +CONFIG_SOC_SYSTIMER_COUNTER_NUM=2 +CONFIG_SOC_SYSTIMER_ALARM_NUM=3 +CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO=32 +CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI=20 +CONFIG_SOC_SYSTIMER_FIXED_DIVIDER=y +CONFIG_SOC_SYSTIMER_INT_LEVEL=y +CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE=y +CONFIG_SOC_TIMER_GROUPS=2 +CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=1 +CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54 +CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y +CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y +CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=2 +CONFIG_SOC_TWAI_BRP_MIN=2 +CONFIG_SOC_TWAI_BRP_MAX=16384 +CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS=y +CONFIG_SOC_SECURE_BOOT_V2_RSA=y +CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3 +CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y +CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y +CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y +CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16 +CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=512 +CONFIG_SOC_UART_NUM=2 +CONFIG_SOC_UART_FIFO_LEN=128 +CONFIG_SOC_UART_BITRATE_MAX=5000000 +CONFIG_SOC_UART_SUPPORT_APB_CLK=y +CONFIG_SOC_UART_SUPPORT_RTC_CLK=y +CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y +CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y +CONFIG_SOC_UART_REQUIRE_CORE_RESET=y +CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y +CONFIG_SOC_COEX_HW_PTI=y +CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 +CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192 +CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12 +CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_CPU_PD=y +CONFIG_SOC_PM_SUPPORT_WIFI_PD=y +CONFIG_SOC_PM_SUPPORT_BT_PD=y +CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y +CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL=y +CONFIG_SOC_WIFI_HW_TSF=y +CONFIG_SOC_WIFI_FTM_SUPPORT=y +CONFIG_SOC_WIFI_GCMP_SUPPORT=y +CONFIG_SOC_WIFI_WAPI_SUPPORT=y +CONFIG_SOC_WIFI_CSI_SUPPORT=y +CONFIG_SOC_WIFI_MESH_SUPPORT=y +CONFIG_SOC_BLE_SUPPORTED=y CONFIG_IDF_CMAKE=y CONFIG_IDF_TARGET_ARCH_RISCV=y +CONFIG_IDF_TARGET_ARCH="riscv" CONFIG_IDF_TARGET="esp32c3" CONFIG_IDF_TARGET_ESP32C3=y CONFIG_IDF_RTOS_RTTHREAD=y CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005 -# -# SDK tool configuration -# -CONFIG_SDK_TOOLPREFIX="riscv32-esp-elf-" -# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set -# end of SDK tool configuration - # # Build type # @@ -24,18 +219,10 @@ CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y CONFIG_APP_BUILD_GENERATE_BINARIES=y CONFIG_APP_BUILD_BOOTLOADER=y CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# CONFIG_APP_REPRODUCIBLE_BUILD is not set +# CONFIG_APP_NO_BLOBS is not set # end of Build type -# -# Application manager -# -CONFIG_APP_COMPILE_TIME_DATE=y -# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set -# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set -# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set -CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 -# end of Application manager - # # Bootloader config # @@ -54,6 +241,7 @@ CONFIG_BOOTLOADER_LOG_LEVEL=3 CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y # CONFIG_BOOTLOADER_FACTORY_RESET is not set # CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y CONFIG_BOOTLOADER_WDT_ENABLE=y # CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set CONFIG_BOOTLOADER_WDT_TIME_MS=9000 @@ -69,13 +257,34 @@ CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y # # Security features # -CONFIG_SECURE_BOOT_SUPPORTS_RSA=y -CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y +CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED=y +CONFIG_SECURE_BOOT_V2_PREFERRED=y # CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set # CONFIG_SECURE_BOOT is not set # CONFIG_SECURE_FLASH_ENC_ENABLED is not set +CONFIG_SECURE_ROM_DL_MODE_ENABLED=y # end of Security features +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +CONFIG_ESP_ROM_HAS_CRC_LE=y +CONFIG_ESP_ROM_HAS_CRC_BE=y +CONFIG_ESP_ROM_HAS_JPEG_DECODE=y +CONFIG_ESP_ROM_UART_CLK_IS_XTAL=y +CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=3 +CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING=y +CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG=y +CONFIG_ESP_ROM_GET_CLK_FREQ=y +CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y + # # Boot ROM Behavior # @@ -88,7 +297,6 @@ CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y # # Serial flasher config # -CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 # CONFIG_ESPTOOLPY_NO_STUB is not set # CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set @@ -106,23 +314,17 @@ CONFIG_ESPTOOLPY_FLASHFREQ="80m" CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set CONFIG_ESPTOOLPY_FLASHSIZE="4MB" -CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y +# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set CONFIG_ESPTOOLPY_BEFORE_RESET=y # CONFIG_ESPTOOLPY_BEFORE_NORESET is not set CONFIG_ESPTOOLPY_BEFORE="default_reset" CONFIG_ESPTOOLPY_AFTER_RESET=y # CONFIG_ESPTOOLPY_AFTER_NORESET is not set CONFIG_ESPTOOLPY_AFTER="hard_reset" -# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y -# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200 CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 # end of Serial flasher config @@ -149,6 +351,7 @@ CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 # CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set CONFIG_COMPILER_HIDE_PATHS_MACROS=y @@ -160,7 +363,6 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set # CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set -# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set # CONFIG_COMPILER_DUMP_RTL_FILES is not set # end of Compiler options @@ -169,197 +371,102 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y # # -# Application Level Tracing -# -# CONFIG_APPTRACE_DEST_JTAG is not set -CONFIG_APPTRACE_DEST_NONE=y -CONFIG_APPTRACE_LOCK_ENABLE=y -# end of Application Level Tracing - -# -# ESP-ASIO -# -# CONFIG_ASIO_SSL_SUPPORT is not set -# end of ESP-ASIO - -# -# Bluetooth -# -# CONFIG_BT_ENABLED is not set -# end of Bluetooth - -# -# CoAP Configuration -# -CONFIG_COAP_MBEDTLS_PSK=y -# CONFIG_COAP_MBEDTLS_PKI is not set -# CONFIG_COAP_MBEDTLS_DEBUG is not set -CONFIG_COAP_LOG_DEFAULT_LEVEL=0 -# end of CoAP Configuration - -# -# Driver configurations +# Driver Configurations # # -# ADC configuration +# Legacy ADC Configuration # -# CONFIG_ADC_FORCE_XPD_FSM is not set -CONFIG_ADC_DISABLE_DAC=y -# end of ADC configuration +# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set # -# MCPWM configuration +# Legacy ADC Calibration Configuration # -# CONFIG_MCPWM_ISR_IN_IRAM is not set -# end of MCPWM configuration +# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set +# end of Legacy ADC Calibration Configuration +# end of Legacy ADC Configuration # -# SPI configuration +# SPI Configuration # # CONFIG_SPI_MASTER_IN_IRAM is not set CONFIG_SPI_MASTER_ISR_IN_IRAM=y # CONFIG_SPI_SLAVE_IN_IRAM is not set CONFIG_SPI_SLAVE_ISR_IN_IRAM=y -# end of SPI configuration +# end of SPI Configuration # -# TWAI configuration +# TWAI Configuration # # CONFIG_TWAI_ISR_IN_IRAM is not set -# end of TWAI configuration - -# -# UART configuration -# -# CONFIG_UART_ISR_IN_IRAM is not set -# end of UART configuration - -# -# GDMA Configuration -# -# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set -# CONFIG_GDMA_ISR_IRAM_SAFE is not set -# end of GDMA Configuration -# end of Driver configurations - -# -# eFuse Bit Manager -# -# CONFIG_EFUSE_CUSTOM_TABLE is not set -# CONFIG_EFUSE_VIRTUAL is not set -CONFIG_EFUSE_MAX_BLK_LEN=256 -# end of eFuse Bit Manager - -# -# ESP-TLS -# -CONFIG_ESP_TLS_USING_MBEDTLS=y -CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y -# CONFIG_ESP_TLS_SERVER is not set -# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set -# CONFIG_ESP_TLS_PSK_VERIFICATION is not set -# CONFIG_ESP_TLS_INSECURE is not set -# end of ESP-TLS - -# -# ESP32C3-Specific -# -# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set -CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y -CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160 -# CONFIG_ESP32C3_REV_MIN_0 is not set -# CONFIG_ESP32C3_REV_MIN_1 is not set -# CONFIG_ESP32C3_REV_MIN_2 is not set -CONFIG_ESP32C3_REV_MIN_3=y -CONFIG_ESP32C3_REV_MIN=3 -CONFIG_ESP32C3_DEBUG_OCDAWARE=y -# CONFIG_ESP32C3_DEBUG_STUBS_ENABLE is not set -CONFIG_ESP32C3_BROWNOUT_DET=y -CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y -# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set -CONFIG_ESP32C3_BROWNOUT_DET_LVL=7 -CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y -# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set -# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set -# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set -CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y -# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set -CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024 -# CONFIG_ESP32C3_NO_BLOBS is not set -# end of ESP32C3-Specific +# end of TWAI Configuration # -# ADC-Calibration +# Temperature sensor Configuration # -# end of ADC-Calibration +# CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_TEMP_SENSOR_ENABLE_DEBUG_LOG is not set +# end of Temperature sensor Configuration # -# Common ESP-related +# UART Configuration # -CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -# end of Common ESP-related +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART Configuration # -# Ethernet +# GPIO Configuration # -CONFIG_ETH_ENABLED=y -CONFIG_ETH_USE_SPI_ETHERNET=y -# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set -# CONFIG_ETH_SPI_ETHERNET_W5500 is not set -# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set -# CONFIG_ETH_USE_OPENETH is not set -# end of Ethernet +# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set +# end of GPIO Configuration # -# Event Loop Library +# Sigma Delta Modulator Configuration # -# CONFIG_ESP_EVENT_LOOP_PROFILING is not set -CONFIG_ESP_EVENT_POST_FROM_ISR=y -CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y -# end of Event Loop Library +# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_SDM_ENABLE_DEBUG_LOG is not set +# end of Sigma Delta Modulator Configuration # -# GDB Stub +# GPTimer Configuration # -# end of GDB Stub +# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set +# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set +# end of GPTimer Configuration # -# ESP HTTP client +# RMT Configuration # -CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y -# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set -CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y -# end of ESP HTTP client +# CONFIG_RMT_ISR_IRAM_SAFE is not set +# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_RMT_ENABLE_DEBUG_LOG is not set +# end of RMT Configuration # -# HTTP Server +# I2S Configuration # -CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 -CONFIG_HTTPD_MAX_URI_LEN=512 -CONFIG_HTTPD_ERR_RESP_NO_DELAY=y -CONFIG_HTTPD_PURGE_BUF_LEN=32 -# CONFIG_HTTPD_LOG_PURGE_DATA is not set -# CONFIG_HTTPD_WS_SUPPORT is not set -# end of HTTP Server +# CONFIG_I2S_ISR_IRAM_SAFE is not set +# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_I2S_ENABLE_DEBUG_LOG is not set +# end of I2S Configuration +# end of Driver Configurations # -# ESP HTTPS OTA +# eFuse Bit Manager # -# CONFIG_OTA_ALLOW_HTTP is not set -# end of ESP HTTPS OTA +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +CONFIG_EFUSE_MAX_BLK_LEN=256 +# end of eFuse Bit Manager # -# ESP HTTPS server +# Common ESP-related # -# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set -# end of ESP HTTPS server +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related # # Hardware Settings @@ -384,42 +491,53 @@ CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y # CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set # end of Sleep Config -# end of Hardware Settings # -# IPC (Inter-Processor Call) +# RTC Clock Config # -CONFIG_ESP_IPC_TASK_STACK_SIZE=1536 -# end of IPC (Inter-Processor Call) +CONFIG_RTC_CLK_SRC_INT_RC=y +# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_RTC_CLK_CAL_CYCLES=1024 +CONFIG_RTC_CLOCK_BBPLL_POWER_ON_WITH_USB=y +# end of RTC Clock Config # -# LCD and Touch Panel +# Peripheral Control # +# CONFIG_PERIPH_CTRL_FUNC_IN_IRAM is not set +# end of Peripheral Control # -# LCD Peripheral Configuration +# MMU Config # -CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 -# end of LCD Peripheral Configuration -# end of LCD and Touch Panel +CONFIG_MMU_PAGE_SIZE_64KB=y +CONFIG_MMU_PAGE_MODE="64KB" +CONFIG_MMU_PAGE_SIZE=0x10000 +# end of MMU Config + +# CONFIG_ESP32C3_REV_MIN_0 is not set +# CONFIG_ESP32C3_REV_MIN_1 is not set +# CONFIG_ESP32C3_REV_MIN_2 is not set +CONFIG_ESP32C3_REV_MIN_3=y +# CONFIG_ESP32C3_REV_MIN_4 is not set +CONFIG_ESP32C3_REV_MIN=3 # -# ESP NETIF Adapter +# GDMA Configuration # -CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 -CONFIG_ESP_NETIF_TCPIP_LWIP=y -# CONFIG_ESP_NETIF_LOOPBACK is not set -CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y -# end of ESP NETIF Adapter +# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GDMA_ISR_IRAM_SAFE is not set +# end of GDMA Configuration # -# PHY +# Main XTAL Config # -CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP_PHY_MAX_TX_POWER=20 -# end of PHY +CONFIG_XTAL_FREQ_40=y +CONFIG_XTAL_FREQ=40 +# end of Main XTAL Config +# end of Hardware Settings # # Power Management @@ -428,9 +546,19 @@ CONFIG_ESP_PHY_MAX_TX_POWER=20 CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y # end of Power Management +# +# ESP Ringbuf +# +# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set +# CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH is not set +# end of ESP Ringbuf + # # ESP System Settings # +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160 # CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set @@ -444,11 +572,8 @@ CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y # # Memory protection # -CONFIG_ESP_SYSTEM_MEMPROT_DEPCHECK=y CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=y CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y -CONFIG_ESP_SYSTEM_MEMPROT_CPU_PREFETCH_PAD_SIZE=16 -CONFIG_ESP_SYSTEM_MEMPROT_MEM_ALIGN_SIZE=512 # end of Memory protection CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 @@ -470,9 +595,32 @@ CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 # CONFIG_ESP_INT_WDT is not set # CONFIG_ESP_TASK_WDT is not set # CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +# CONFIG_ESP_DEBUG_OCDAWARE is not set CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y + +# +# Brownout Detector +# +CONFIG_ESP_BROWNOUT_DET=y +CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7=y +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set +CONFIG_ESP_BROWNOUT_DET_LVL=7 +# end of Brownout Detector + +CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y # end of ESP System Settings +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1536 +# end of IPC (Inter-Processor Call) + # # High resolution timer (esp_timer) # @@ -486,149 +634,54 @@ CONFIG_ESP_TIMER_IMPL_SYSTIMER=y # end of High resolution timer (esp_timer) # -# Wi-Fi -# -CONFIG_ESP32_WIFI_ENABLED=y -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_CSI_ENABLED is not set -CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP32_WIFI_TX_BA_WIN=6 -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_NVS_ENABLED=y -CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP32_WIFI_IRAM_OPT=y -CONFIG_ESP32_WIFI_RX_IRAM_OPT=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y -# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set -# CONFIG_ESP_WIFI_FTM_ENABLE is not set -# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set -# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set -# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set -# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set -CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y -# end of Wi-Fi - -# -# Core dump -# -# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set -# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set -CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y -# end of Core dump - -# -# FAT Filesystem support -# -# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set -CONFIG_FATFS_CODEPAGE_437=y -# CONFIG_FATFS_CODEPAGE_720 is not set -# CONFIG_FATFS_CODEPAGE_737 is not set -# CONFIG_FATFS_CODEPAGE_771 is not set -# CONFIG_FATFS_CODEPAGE_775 is not set -# CONFIG_FATFS_CODEPAGE_850 is not set -# CONFIG_FATFS_CODEPAGE_852 is not set -# CONFIG_FATFS_CODEPAGE_855 is not set -# CONFIG_FATFS_CODEPAGE_857 is not set -# CONFIG_FATFS_CODEPAGE_860 is not set -# CONFIG_FATFS_CODEPAGE_861 is not set -# CONFIG_FATFS_CODEPAGE_862 is not set -# CONFIG_FATFS_CODEPAGE_863 is not set -# CONFIG_FATFS_CODEPAGE_864 is not set -# CONFIG_FATFS_CODEPAGE_865 is not set -# CONFIG_FATFS_CODEPAGE_866 is not set -# CONFIG_FATFS_CODEPAGE_869 is not set -# CONFIG_FATFS_CODEPAGE_932 is not set -# CONFIG_FATFS_CODEPAGE_936 is not set -# CONFIG_FATFS_CODEPAGE_949 is not set -# CONFIG_FATFS_CODEPAGE_950 is not set -CONFIG_FATFS_CODEPAGE=437 -CONFIG_FATFS_LFN_NONE=y -# CONFIG_FATFS_LFN_HEAP is not set -# CONFIG_FATFS_LFN_STACK is not set -CONFIG_FATFS_FS_LOCK=0 -CONFIG_FATFS_TIMEOUT_MS=10000 -CONFIG_FATFS_PER_FILE_CACHE=y -# CONFIG_FATFS_USE_FASTSEEK is not set -# end of FAT Filesystem support - -# -# Modbus configuration -# -CONFIG_FMB_COMM_MODE_TCP_EN=y -CONFIG_FMB_TCP_PORT_DEFAULT=502 -CONFIG_FMB_TCP_PORT_MAX_CONN=5 -CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20 -CONFIG_FMB_COMM_MODE_RTU_EN=y -CONFIG_FMB_COMM_MODE_ASCII_EN=y -CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_FMB_QUEUE_LENGTH=20 -CONFIG_FMB_PORT_TASK_STACK_SIZE=4096 -CONFIG_FMB_SERIAL_BUF_SIZE=256 -CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8 -CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000 -CONFIG_FMB_PORT_TASK_PRIO=10 -CONFIG_FMB_PORT_TASK_AFFINITY=0x7FFFFFFF -CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y -CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233 -CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_FMB_CONTROLLER_STACK_SIZE=4096 -CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 -# CONFIG_FMB_TIMER_PORT_ENABLED is not set -CONFIG_FMB_TIMER_GROUP=0 -CONFIG_FMB_TIMER_INDEX=0 -CONFIG_FMB_MASTER_TIMER_GROUP=0 -CONFIG_FMB_MASTER_TIMER_INDEX=0 -# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set -# end of Modbus configuration +# FreeRTOS +# # -# FreeRTOS +# Kernel # +# CONFIG_FREERTOS_SMP is not set CONFIG_FREERTOS_UNICORE=y -CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF -CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y -CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y -# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set -CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y -CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y CONFIG_FREERTOS_HZ=1000 -CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE=y # CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set -CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y -# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set -CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY is not set CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 -CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y -# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set -# CONFIG_FREERTOS_ASSERT_DISABLE is not set CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 -CONFIG_FREERTOS_ISR_STACKSIZE=1536 -# CONFIG_FREERTOS_LEGACY_HOOKS is not set +# CONFIG_FREERTOS_USE_IDLE_HOOK is not set +# CONFIG_FREERTOS_USE_TICK_HOOK is not set CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 -CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 # CONFIG_FREERTOS_USE_TRACE_FACILITY is not set # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +# end of Kernel + +# +# Port +# CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y -# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y +CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y +# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set +CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y # CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set -CONFIG_FREERTOS_DEBUG_OCDAWARE=y +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y # CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT is not set +# end of Port + +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y # end of FreeRTOS # @@ -636,7 +689,7 @@ CONFIG_FREERTOS_DEBUG_OCDAWARE=y # CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y # CONFIG_HAL_ASSERTION_DISABLE is not set -# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_HAL_ASSERTION_SILENT is not set # CONFIG_HAL_ASSERTION_ENABLE is not set CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 # end of Hardware Abstraction Layer (HAL) and Low Level (LL) @@ -653,18 +706,6 @@ CONFIG_HEAP_TRACING_OFF=y # CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set # end of Heap memory debugging -# -# jsmn -# -# CONFIG_JSMN_PARENT_LINKS is not set -# CONFIG_JSMN_STRICT is not set -# end of jsmn - -# -# libsodium -# -# end of libsodium - # # Log output # @@ -684,147 +725,6 @@ CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set # end of Log output -# -# LWIP -# -CONFIG_LWIP_LOCAL_HOSTNAME="espressif" -# CONFIG_LWIP_NETIF_API is not set -# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set -CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y -# CONFIG_LWIP_L2_TO_L3_COPY is not set -# CONFIG_LWIP_IRAM_OPTIMIZATION is not set -CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 -# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set -# CONFIG_LWIP_SO_LINGER is not set -CONFIG_LWIP_SO_REUSE=y -CONFIG_LWIP_SO_REUSE_RXTOALL=y -# CONFIG_LWIP_SO_RCVBUF is not set -# CONFIG_LWIP_NETBUF_RECVINFO is not set -CONFIG_LWIP_IP4_FRAG=y -CONFIG_LWIP_IP6_FRAG=y -# CONFIG_LWIP_IP4_REASSEMBLY is not set -# CONFIG_LWIP_IP6_REASSEMBLY is not set -# CONFIG_LWIP_IP_FORWARD is not set -# CONFIG_LWIP_STATS is not set -# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set -CONFIG_LWIP_ESP_GRATUITOUS_ARP=y -CONFIG_LWIP_GARP_TMR_INTERVAL=60 -CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 -CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y -# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set -CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y -# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set -CONFIG_LWIP_DHCP_OPTIONS_LEN=68 - -# -# DHCP server -# -CONFIG_LWIP_DHCPS=y -CONFIG_LWIP_DHCPS_LEASE_UNIT=60 -CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 -# end of DHCP server - -# CONFIG_LWIP_AUTOIP is not set -CONFIG_LWIP_IPV6=y -# CONFIG_LWIP_IPV6_AUTOCONFIG is not set -CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 -# CONFIG_LWIP_IPV6_FORWARD is not set -# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set -CONFIG_LWIP_NETIF_LOOPBACK=y -CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 - -# -# TCP -# -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 -CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y -CONFIG_LWIP_TCP_MAXRTX=12 -CONFIG_LWIP_TCP_SYNMAXRTX=12 -CONFIG_LWIP_TCP_MSS=1440 -CONFIG_LWIP_TCP_TMR_INTERVAL=250 -CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 -CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 -CONFIG_LWIP_TCP_QUEUE_OOSEQ=y -# CONFIG_LWIP_TCP_SACK_OUT is not set -# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_LWIP_TCP_OVERSIZE_MSS=y -# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set -CONFIG_LWIP_TCP_RTO_TIME=1500 -# end of TCP - -# -# UDP -# -CONFIG_LWIP_MAX_UDP_PCBS=16 -CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 -# end of UDP - -# -# Checksums -# -# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set -# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set -CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y -# end of Checksums - -CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set -CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_LWIP_PPP_SUPPORT is not set -CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 -CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 -# CONFIG_LWIP_SLIP_SUPPORT is not set - -# -# ICMP -# -CONFIG_LWIP_ICMP=y -# CONFIG_LWIP_MULTICAST_PING is not set -# CONFIG_LWIP_BROADCAST_PING is not set -# end of ICMP - -# -# LWIP RAW API -# -CONFIG_LWIP_MAX_RAW_PCBS=16 -# end of LWIP RAW API - -# -# SNTP -# -CONFIG_LWIP_SNTP_MAX_SERVERS=1 -# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set -CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 -# end of SNTP - -CONFIG_LWIP_ESP_LWIP_ASSERT=y - -# -# Hooks -# -# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set -CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y -# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y -# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set -CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y -# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set -# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set -CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set -# end of Hooks - -# CONFIG_LWIP_DEBUG is not set -# end of LWIP - # # mbedTLS # @@ -837,6 +737,16 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 # CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set # CONFIG_MBEDTLS_DEBUG is not set +# +# mbedTLS v3.x related +# +# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +# end of mbedTLS v3.x related + # # Certificate Bundle # @@ -845,6 +755,7 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set # CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set # CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 # end of Certificate Bundle # CONFIG_MBEDTLS_ECP_RESTARTABLE is not set @@ -852,11 +763,13 @@ CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y CONFIG_MBEDTLS_HARDWARE_AES=y CONFIG_MBEDTLS_AES_USE_INTERRUPT=y CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y CONFIG_MBEDTLS_HARDWARE_SHA=y CONFIG_MBEDTLS_ROM_MD5=y # CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set # CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y CONFIG_MBEDTLS_SHA512_C=y @@ -873,7 +786,6 @@ CONFIG_MBEDTLS_TLS_ENABLED=y # # CONFIG_MBEDTLS_PSK_MODES is not set CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y @@ -882,16 +794,11 @@ CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y # end of TLS Key Exchange Methods CONFIG_MBEDTLS_SSL_RENEGOTIATION=y -# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set -CONFIG_MBEDTLS_SSL_PROTO_TLS1=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y # CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set # CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set CONFIG_MBEDTLS_SSL_ALPN=y CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y -CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y -CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y # @@ -900,9 +807,6 @@ CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y CONFIG_MBEDTLS_AES_C=y # CONFIG_MBEDTLS_CAMELLIA_C is not set # CONFIG_MBEDTLS_DES_C is not set -CONFIG_MBEDTLS_RC4_DISABLED=y -# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set -# CONFIG_MBEDTLS_RC4_ENABLED is not set # CONFIG_MBEDTLS_BLOWFISH_C is not set # CONFIG_MBEDTLS_XTEA_C is not set CONFIG_MBEDTLS_CCM_C=y @@ -922,6 +826,7 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y # end of Certificates CONFIG_MBEDTLS_ECP_C=y +# CONFIG_MBEDTLS_DHM_C is not set CONFIG_MBEDTLS_ECDH_C=y CONFIG_MBEDTLS_ECDSA_C=y # CONFIG_MBEDTLS_ECJPAKE_C is not set @@ -946,37 +851,6 @@ CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y # CONFIG_MBEDTLS_SECURITY_RISKS is not set # end of mbedTLS -# -# mDNS -# -CONFIG_MDNS_MAX_SERVICES=10 -CONFIG_MDNS_TASK_PRIORITY=1 -CONFIG_MDNS_TASK_STACK_SIZE=4096 -# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_MDNS_TASK_AFFINITY_CPU0=y -CONFIG_MDNS_TASK_AFFINITY=0x0 -CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 -# CONFIG_MDNS_STRICT_MODE is not set -CONFIG_MDNS_TIMER_PERIOD_MS=100 -# CONFIG_MDNS_NETWORKING_SOCKET is not set -CONFIG_MDNS_MULTIPLE_INSTANCE=y -# end of mDNS - -# -# ESP-MQTT Configurations -# -CONFIG_MQTT_PROTOCOL_311=y -CONFIG_MQTT_TRANSPORT_SSL=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y -# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set -# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set -# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set -# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set -# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set -# CONFIG_MQTT_CUSTOM_OUTBOX is not set -# end of ESP-MQTT Configurations - # # Newlib # @@ -987,28 +861,12 @@ CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y # CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y # CONFIG_NEWLIB_NANO_FORMAT is not set +CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y +# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set # end of Newlib -# -# NVS -# -# end of NVS - -# -# OpenSSL -# -# CONFIG_OPENSSL_DEBUG is not set -CONFIG_OPENSSL_ERROR_STACK=y -# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set -CONFIG_OPENSSL_ASSERT_EXIT=y -# end of OpenSSL - -# -# OpenThread -# -# CONFIG_OPENTHREAD_ENABLED is not set -# end of OpenThread - # # PThreads # @@ -1025,11 +883,11 @@ CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" # CONFIG_SPI_FLASH_VERIFY_WRITE is not set # CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +CONFIG_SPI_FLASH_HAS_ROM_IMPL=y # CONFIG_SPI_FLASH_ROM_IMPL is not set CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y # CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set # CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set -# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set # CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set # CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y @@ -1041,6 +899,13 @@ CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 # CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set # CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set +# +# SPI Flash behavior when brownout +# +CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y +CONFIG_SPI_FLASH_BROWNOUT_RESET=y +# end of SPI Flash behavior when brownout + # # Auto-detect flash chips # @@ -1049,124 +914,15 @@ CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y # end of Auto-detect flash chips CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y # end of SPI Flash driver - -# -# SPIFFS Configuration -# -CONFIG_SPIFFS_MAX_PARTITIONS=3 - -# -# SPIFFS Cache Configuration -# -CONFIG_SPIFFS_CACHE=y -CONFIG_SPIFFS_CACHE_WR=y -# CONFIG_SPIFFS_CACHE_STATS is not set -# end of SPIFFS Cache Configuration - -CONFIG_SPIFFS_PAGE_CHECK=y -CONFIG_SPIFFS_GC_MAX_RUNS=10 -# CONFIG_SPIFFS_GC_STATS is not set -CONFIG_SPIFFS_PAGE_SIZE=256 -CONFIG_SPIFFS_OBJ_NAME_LEN=32 -# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set -CONFIG_SPIFFS_USE_MAGIC=y -CONFIG_SPIFFS_USE_MAGIC_LENGTH=y -CONFIG_SPIFFS_META_LENGTH=4 -CONFIG_SPIFFS_USE_MTIME=y - -# -# Debug Configuration -# -# CONFIG_SPIFFS_DBG is not set -# CONFIG_SPIFFS_API_DBG is not set -# CONFIG_SPIFFS_GC_DBG is not set -# CONFIG_SPIFFS_CACHE_DBG is not set -# CONFIG_SPIFFS_CHECK_DBG is not set -# CONFIG_SPIFFS_TEST_VISUALISATION is not set -# end of Debug Configuration -# end of SPIFFS Configuration - -# -# TCP Transport -# - -# -# Websocket -# -CONFIG_WS_TRANSPORT=y -CONFIG_WS_BUFFER_SIZE=1024 -# end of Websocket -# end of TCP Transport - -# -# Unity unit testing library -# -CONFIG_UNITY_ENABLE_FLOAT=y -CONFIG_UNITY_ENABLE_DOUBLE=y -# CONFIG_UNITY_ENABLE_64BIT is not set -# CONFIG_UNITY_ENABLE_COLOR is not set -CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y -# CONFIG_UNITY_ENABLE_FIXTURE is not set -# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set -# end of Unity unit testing library - -# -# Virtual file system -# -CONFIG_VFS_SUPPORT_IO=y -CONFIG_VFS_SUPPORT_DIR=y -CONFIG_VFS_SUPPORT_SELECT=y -CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_VFS_SUPPORT_TERMIOS=y - -# -# Host File System I/O (Semihosting) -# -CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 -# end of Host File System I/O (Semihosting) -# end of Virtual file system - -# -# Wear Levelling -# -# CONFIG_WL_SECTOR_SIZE_512 is not set -CONFIG_WL_SECTOR_SIZE_4096=y -CONFIG_WL_SECTOR_SIZE=4096 -# end of Wear Levelling - -# -# Wi-Fi Provisioning Manager -# -CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 -CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 -# end of Wi-Fi Provisioning Manager - -# -# Supplicant -# -CONFIG_WPA_MBEDTLS_CRYPTO=y -# CONFIG_WPA_WAPI_PSK is not set -# CONFIG_WPA_SUITE_B_192 is not set -# CONFIG_WPA_DEBUG_PRINT is not set -# CONFIG_WPA_TESTING_OPTIONS is not set -# CONFIG_WPA_WPS_STRICT is not set -# CONFIG_WPA_11KV_SUPPORT is not set -# end of Supplicant # end of Component config -# -# Compatibility options -# -# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set -# end of Compatibility options - # Deprecated options for backward compatibility -CONFIG_TOOLPREFIX="riscv32-esp-elf-" +# CONFIG_NO_BLOBS is not set # CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set # CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set # CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set @@ -1180,16 +936,10 @@ CONFIG_LOG_BOOTLOADER_LEVEL=3 # CONFIG_FLASHMODE_QOUT is not set CONFIG_FLASHMODE_DIO=y # CONFIG_FLASHMODE_DOUT is not set -# CONFIG_MONITOR_BAUD_9600B is not set -# CONFIG_MONITOR_BAUD_57600B is not set -CONFIG_MONITOR_BAUD_115200B=y -# CONFIG_MONITOR_BAUD_230400B is not set -# CONFIG_MONITOR_BAUD_921600B is not set -# CONFIG_MONITOR_BAUD_2MB is not set -# CONFIG_MONITOR_BAUD_OTHER is not set -CONFIG_MONITOR_BAUD_OTHER_VAL=115200 CONFIG_MONITOR_BAUD=115200 +CONFIG_OPTIMIZATION_LEVEL_DEBUG=y CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set # CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y # CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set @@ -1201,87 +951,61 @@ CONFIG_STACK_CHECK_NONE=y # CONFIG_STACK_CHECK_STRONG is not set # CONFIG_STACK_CHECK_ALL is not set # CONFIG_WARN_WRITE_STRINGS is not set -# CONFIG_DISABLE_GCC8_WARNINGS is not set -# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set -CONFIG_ESP32_APPTRACE_DEST_NONE=y -CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y -CONFIG_ADC2_DISABLE_DAC=y -# CONFIG_EVENT_LOOP_PROFILING is not set -CONFIG_POST_EVENTS_FROM_ISR=y -CONFIG_POST_EVENTS_FROM_IRAM_ISR=y CONFIG_ESP_SYSTEM_PD_FLASH=y CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y -CONFIG_IPC_TASK_STACK_SIZE=1536 -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 +CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y +# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024 CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y -# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set -CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y -# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP32S2_PANIC_GDBSTUB is not set -CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y -CONFIG_ESP32H2_MEMPROT_FEATURE=y -CONFIG_ESP32H2_MEMPROT_FEATURE_LOCK=y +# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set +CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y +CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160 +CONFIG_ESP32C3_MEMPROT_FEATURE=y +CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK=y CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 CONFIG_MAIN_TASK_STACK_SIZE=3584 CONFIG_CONSOLE_UART_DEFAULT=y # CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_CONSOLE_UART_NONE is not set # CONFIG_ESP_CONSOLE_UART_NONE is not set CONFIG_CONSOLE_UART=y CONFIG_CONSOLE_UART_NUM=0 CONFIG_CONSOLE_UART_BAUDRATE=115200 # CONFIG_INT_WDT is not set # CONFIG_TASK_WDT is not set +# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set +# CONFIG_ESP32C3_DEBUG_OCDAWARE is not set +CONFIG_BROWNOUT_DET=y +CONFIG_ESP32C3_BROWNOUT_DET=y +CONFIG_ESP32C3_BROWNOUT_DET=y +CONFIG_BROWNOUT_DET_LVL_SEL_7=y +CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y +# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set +CONFIG_BROWNOUT_DET_LVL=7 +CONFIG_ESP32C3_BROWNOUT_DET_LVL=7 +CONFIG_IPC_TASK_STACK_SIZE=1536 CONFIG_TIMER_TASK_STACK_SIZE=3584 -# CONFIG_EXTERNAL_COEX_ENABLE is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set -CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y -CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_MB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_MB_QUEUE_LENGTH=20 -CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096 -CONFIG_MB_SERIAL_BUF_SIZE=256 -CONFIG_MB_SERIAL_TASK_PRIO=10 -CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y -CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233 -CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_MB_CONTROLLER_STACK_SIZE=4096 -CONFIG_MB_EVENT_QUEUE_TIMEOUT=20 -# CONFIG_MB_TIMER_PORT_ENABLED is not set -CONFIG_MB_TIMER_GROUP=0 -CONFIG_MB_TIMER_INDEX=0 -# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set CONFIG_TIMER_TASK_PRIORITY=1 CONFIG_TIMER_TASK_STACK_DEPTH=2048 CONFIG_TIMER_QUEUE_LENGTH=10 -# CONFIG_L2_TO_L3_COPY is not set -# CONFIG_USE_ONLY_LWIP_SELECT is not set -CONFIG_ESP_GRATUITOUS_ARP=y -CONFIG_GARP_TMR_INTERVAL=60 -CONFIG_TCPIP_RECVMBOX_SIZE=32 -CONFIG_TCP_MAXRTX=12 -CONFIG_TCP_SYNMAXRTX=12 -CONFIG_TCP_MSS=1440 -CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 -CONFIG_TCP_RECVMBOX_SIZE=6 -CONFIG_TCP_QUEUE_OOSEQ=y -# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_TCP_OVERSIZE_MSS=y -# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_TCP_OVERSIZE_DISABLE is not set -CONFIG_UDP_RECVMBOX_SIZE=6 -CONFIG_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set -CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_PPP_SUPPORT is not set +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y +# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set +# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 CONFIG_ESP32_PTHREAD_STACK_MIN=768 @@ -1290,8 +1014,4 @@ CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y # CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set # CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set -CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_SUPPORT_TERMIOS=y -CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 # End of deprecated options diff --git a/tools/building.py b/tools/building.py index 680c6a55ab6648167e2b2a8dbac8bcd10792001a..8b8c0d82f9454c0a65486afe357807da839896af 100644 --- a/tools/building.py +++ b/tools/building.py @@ -186,7 +186,8 @@ def PrepareBuilding(env, root_directory, has_libcpu=False, remove_components = [ 'cmake':('gcc', 'gcc'), 'cmake-armclang':('keil', 'armclang'), 'xmake':('gcc', 'gcc'), - 'codelite' : ('gcc', 'gcc')} + 'codelite' : ('gcc', 'gcc'), + 'esp-idf': ('gcc', 'gcc')} tgt_name = GetOption('target') if tgt_name: @@ -857,10 +858,16 @@ def GenTargetProject(program = None): if GetOption('target') == 'cmake' or GetOption('target') == 'cmake-armclang': from cmake import CMakeProject CMakeProject(Env,Projects) + if GetOption('target') == 'xmake': from xmake import XMakeProject XMakeProject(Env, Projects) + if GetOption('target') == 'esp-idf': + from esp_idf import ESPIDFProject + ESPIDFProject(Env, Projects) + exit(0) + def EndBuilding(target, program = None): need_exit = False diff --git a/tools/esp_idf.py b/tools/esp_idf.py new file mode 100644 index 0000000000000000000000000000000000000000..2977b3a50720dd4b66f7f5bf63bd54b8f223c299 --- /dev/null +++ b/tools/esp_idf.py @@ -0,0 +1,48 @@ +import os +import re +import utils +from utils import _make_path_relative + +def GenerateCFiles(env,project): + """ + Generate CMakeLists.txt files + """ + info = utils.ProjectInfo(env) + init_export = [] + + main_component_dir = os.path.join(os.getcwd(), 'main') + cm_file = open(os.path.join(main_component_dir, 'CMakeLists.txt'), 'w') + if cm_file: + cm_file.write("idf_component_register(\n") + + cm_file.write("\tSRCS\n") + for group in project: + for f in group['src']: + path = _make_path_relative(main_component_dir, os.path.normpath(f.rfile().abspath)) + cm_file.write( "\t" + path.replace("\\", "/") + "\n" ) + src = open(f.rfile().abspath, 'r') + for line in src.readlines(): + if re.match('INIT_(BOARD|PREV|DEVICE|COMPONENT|ENV|APP)_EXPORT\(.+\)', line): + init_export.append(re.search('\(.+\)', line).group(0)[1:-1]) + src.close() + + cm_file.write("\n") + + cm_file.write("\tINCLUDE_DIRS\n") + for i in info['CPPPATH']: + path = _make_path_relative(main_component_dir, i) + cm_file.write( "\t" + path.replace("\\", "/") + "\n") + cm_file.write(")\n\n") + + print(init_export) + n = len(init_export) + if n: + cm_file.write("target_link_libraries(${COMPONENT_LIB}\n") + for i in range(n): + cm_file.write("\tINTERFACE \"-u __rt_init_" + init_export[i] + "\"\n") + cm_file.write(")\n") + +def ESPIDFProject(env,project): + print('Update setting files for CMakeLists.txt...') + GenerateCFiles(env,project) + print('Done!')