rename bsp risc-v to hifive1

20f581a6 · z13955633063 · 0cd49e7c · 20f581a6 · 20f581a6 · 20f581a6
26 changed file
--- a/bsp/risc-v/Makefile
+++ b/bsp/risc-v/Makefile
--- a/bsp/risc-v/SConscript
+++ b/bsp/risc-v/SConscript
--- a/bsp/risc-v/SConstruct
+++ b/bsp/risc-v/SConstruct
--- a/bsp/risc-v/applications/SConscript
+++ b/bsp/risc-v/applications/SConscript
--- a/bsp/risc-v/applications/applications.c
+++ b/bsp/risc-v/applications/applications.c
--- a/bsp/risc-v/applications/cmd.c
+++ b/bsp/risc-v/applications/cmd.c
--- a/bsp/risc-v/applications/startup.c
+++ b/bsp/risc-v/applications/startup.c
--- a/bsp/risc-v/drivers/SConscript
+++ b/bsp/risc-v/drivers/SConscript
--- a/bsp/risc-v/drivers/board.c
+++ b/bsp/risc-v/drivers/board.c
--- a/bsp/risc-v/drivers/board.h
+++ b/bsp/risc-v/drivers/board.h
--- a/bsp/risc-v/drivers/cpuusage.c
+++ b/bsp/risc-v/drivers/cpuusage.c
--- a/bsp/risc-v/drivers/led.c
+++ b/bsp/risc-v/drivers/led.c
@@ -8,25 +8,6 @@ void rt_hw_led_init(void)
 void rt_hw_led_on(int led)
 {

-	/*
-	// Make sure the HFROSC is on before the next line:
-	PRCI_REG(PRCI_HFROSCCFG) |= ROSC_EN(1);
-	// Run off 16 MHz Crystal for accuracy. Note that the
-	// first line is 
-	PRCI_REG(PRCI_PLLCFG) = (PLL_REFSEL(1) | PLL_BYPASS(1));
-	PRCI_REG(PRCI_PLLCFG) |= (PLL_SEL(1));
-	// Turn off HFROSC to save power
-	PRCI_REG(PRCI_HFROSCCFG) &= ~(ROSC_EN(1));
-	*/
-
-
-	// Wait a bit to avoid corruption on the UART.
-	// (In some cases, switching to the IOF can lead
-	// to output glitches, so need to let the UART
-	// reciever time out and resynchronize to the real 
-	// start of the stream.
-	volatile int i=0;
-	while(i < 10000){i++;}

 	uint16_t r=0xFF;
 	uint16_t g=0;

--- a/bsp/risc-v/drivers/led.h
+++ b/bsp/risc-v/drivers/led.h
--- a/bsp/risc-v/drivers/usart.c
+++ b/bsp/risc-v/drivers/usart.c
--- a/bsp/risc-v/drivers/usart.h
+++ b/bsp/risc-v/drivers/usart.h
--- a/bsp/risc-v/openocd.cfg
+++ b/bsp/risc-v/openocd.cfg
--- a/bsp/risc-v/platform/SConscript
+++ b/bsp/risc-v/platform/SConscript
--- a/bsp/risc-v/platform/interrupt.c
+++ b/bsp/risc-v/platform/interrupt.c
--- a/bsp/risc-v/platform/interrupt.h
+++ b/bsp/risc-v/platform/interrupt.h
--- a/bsp/risc-v/platform/plic_driver.h
+++ b/bsp/risc-v/platform/plic_driver.h
--- a/bsp/risc-v/platform/rt_low_level_gcc.inc
+++ b/bsp/risc-v/platform/rt_low_level_gcc.inc
--- a/bsp/risc-v/platform/rt_low_level_init.c
+++ b/bsp/risc-v/platform/rt_low_level_init.c
--- a/bsp/risc-v/rtconfig.h
+++ b/bsp/risc-v/rtconfig.h
--- a/bsp/risc-v/rtconfig.py
+++ b/bsp/risc-v/rtconfig.py
--- a/bsp/risc-v/sdram.ld
+++ b/bsp/risc-v/sdram.ld
--- a/bsp/risc-v/wrap_exit.c
+++ b/bsp/risc-v/wrap_exit.c