replication.c

#include "redis.h"

#include <sys/time.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>

/* ---------------------------------- MASTER -------------------------------- */

void replicationFeedSlaves(list *slaves, int dictid, robj **argv, int argc) {
    listNode *ln;
    listIter li;
    int j;

    listRewind(slaves,&li);
    while((ln = listNext(&li))) {
        redisClient *slave = ln->value;

        /* Don't feed slaves that are still waiting for BGSAVE to start */
        if (slave->replstate == REDIS_REPL_WAIT_BGSAVE_START) continue;

        /* Feed slaves that are waiting for the initial SYNC (so these commands
         * are queued in the output buffer until the intial SYNC completes),
         * or are already in sync with the master. */
        if (slave->slaveseldb != dictid) {
            robj *selectcmd;

            if (dictid >= 0 && dictid < REDIS_SHARED_SELECT_CMDS) {
                selectcmd = shared.select[dictid];
                incrRefCount(selectcmd);
            } else {
                selectcmd = createObject(REDIS_STRING,
                    sdscatprintf(sdsempty(),"select %d\r\n",dictid));
            }
            addReply(slave,selectcmd);
            decrRefCount(selectcmd);
            slave->slaveseldb = dictid;
        }
        addReplyMultiBulkLen(slave,argc);
        for (j = 0; j < argc; j++) addReplyBulk(slave,argv[j]);
    }
}

void replicationFeedMonitors(redisClient *c, list *monitors, int dictid, robj **argv, int argc) {
    listNode *ln;
    listIter li;
    int j, port;
    sds cmdrepr = sdsnew("+");
    robj *cmdobj;
    char ip[32];
    struct timeval tv;

    gettimeofday(&tv,NULL);
    cmdrepr = sdscatprintf(cmdrepr,"%ld.%06ld ",(long)tv.tv_sec,(long)tv.tv_usec);
    if (c->flags & REDIS_LUA_CLIENT) {
        cmdrepr = sdscatprintf(cmdrepr,"[%d lua] ", dictid);
    } else {
        anetPeerToString(c->fd,ip,&port);
        cmdrepr = sdscatprintf(cmdrepr,"[%d %s:%d] ", dictid,ip,port);
    }

    for (j = 0; j < argc; j++) {
        if (argv[j]->encoding == REDIS_ENCODING_INT) {
            cmdrepr = sdscatprintf(cmdrepr, "\"%ld\"", (long)argv[j]->ptr);
        } else {
            cmdrepr = sdscatrepr(cmdrepr,(char*)argv[j]->ptr,
                        sdslen(argv[j]->ptr));
        }
        if (j != argc-1)
            cmdrepr = sdscatlen(cmdrepr," ",1);
    }
    cmdrepr = sdscatlen(cmdrepr,"\r\n",2);
    cmdobj = createObject(REDIS_STRING,cmdrepr);

    listRewind(monitors,&li);
    while((ln = listNext(&li))) {
        redisClient *monitor = ln->value;
        addReply(monitor,cmdobj);
    }
    decrRefCount(cmdobj);
}

void syncCommand(redisClient *c) {
    /* ignore SYNC if aleady slave or in monitor mode */
    if (c->flags & REDIS_SLAVE) return;

    /* Refuse SYNC requests if we are a slave but the link with our master
     * is not ok... */
    if (server.masterhost && server.repl_state != REDIS_REPL_CONNECTED) {
        addReplyError(c,"Can't SYNC while not connected with my master");
        return;
    }

    /* SYNC can't be issued when the server has pending data to send to
     * the client about already issued commands. We need a fresh reply
     * buffer registering the differences between the BGSAVE and the current
     * dataset, so that we can copy to other slaves if needed. */
    if (listLength(c->reply) != 0) {
        addReplyError(c,"SYNC is invalid with pending input");
        return;
    }

    redisLog(REDIS_NOTICE,"Slave ask for synchronization");
    /* Here we need to check if there is a background saving operation
     * in progress, or if it is required to start one */
    if (server.rdb_child_pid != -1) {
        /* Ok a background save is in progress. Let's check if it is a good
         * one for replication, i.e. if there is another slave that is
         * registering differences since the server forked to save */
        redisClient *slave;
        listNode *ln;
        listIter li;

        listRewind(server.slaves,&li);
        while((ln = listNext(&li))) {
            slave = ln->value;
            if (slave->replstate == REDIS_REPL_WAIT_BGSAVE_END) break;
        }
        if (ln) {
            /* Perfect, the server is already registering differences for
             * another slave. Set the right state, and copy the buffer. */
            copyClientOutputBuffer(c,slave);
            c->replstate = REDIS_REPL_WAIT_BGSAVE_END;
            redisLog(REDIS_NOTICE,"Waiting for end of BGSAVE for SYNC");
        } else {
            /* No way, we need to wait for the next BGSAVE in order to
             * register differences */
            c->replstate = REDIS_REPL_WAIT_BGSAVE_START;
            redisLog(REDIS_NOTICE,"Waiting for next BGSAVE for SYNC");
        }
    } else {
        /* Ok we don't have a BGSAVE in progress, let's start one */
        redisLog(REDIS_NOTICE,"Starting BGSAVE for SYNC");
        if (rdbSaveBackground(server.rdb_filename) != REDIS_OK) {
            redisLog(REDIS_NOTICE,"Replication failed, can't BGSAVE");
            addReplyError(c,"Unable to perform background save");
            return;
        }
        c->replstate = REDIS_REPL_WAIT_BGSAVE_END;
    }
    c->repldbfd = -1;
    c->flags |= REDIS_SLAVE;
    c->slaveseldb = 0;
    listAddNodeTail(server.slaves,c);
    return;
}

/* REPLCONF <option> <value> <option> <value> ...
 * This command is used by a slave in order to configure the replication
 * process before starting it with the SYNC command.
 *
 * Currently the only use of this command is to communicate to the master
 * what is the listening port of the Slave redis instance, so that the
 * master can accurately list slaves and their listening ports in
 * the INFO output.
 *
 * In the future the same command can be used in order to configure
 * the replication to initiate an incremental replication instead of a
 * full resync. */
void replconfCommand(redisClient *c) {
    int j;

    if ((c->argc % 2) == 0) {
        /* Number of arguments must be odd to make sure that every
         * option has a corresponding value. */
        addReply(c,shared.syntaxerr);
        return;
    }

    /* Process every option-value pair. */
    for (j = 1; j < c->argc; j+=2) {
        if (!strcasecmp(c->argv[j]->ptr,"listening-port")) {
            long port;

            if ((getLongFromObjectOrReply(c,c->argv[j+1],
                    &port,NULL) != REDIS_OK))
                return;
            c->slave_listening_port = port;
        } else {
            addReplyErrorFormat(c,"Unrecognized REPLCONF option: %s",
                (char*)c->argv[j]->ptr);
            return;
        }
    }
    addReply(c,shared.ok);
}

void sendBulkToSlave(aeEventLoop *el, int fd, void *privdata, int mask) {
    redisClient *slave = privdata;
    REDIS_NOTUSED(el);
    REDIS_NOTUSED(mask);
    char buf[REDIS_IOBUF_LEN];
    ssize_t nwritten, buflen;

    if (slave->repldboff == 0) {
        /* Write the bulk write count before to transfer the DB. In theory here
         * we don't know how much room there is in the output buffer of the
         * socket, but in pratice SO_SNDLOWAT (the minimum count for output
         * operations) will never be smaller than the few bytes we need. */
        sds bulkcount;

        bulkcount = sdscatprintf(sdsempty(),"$%lld\r\n",(unsigned long long)
            slave->repldbsize);
        if (write(fd,bulkcount,sdslen(bulkcount)) != (signed)sdslen(bulkcount))
        {
            sdsfree(bulkcount);
            freeClient(slave);
            return;
        }
        sdsfree(bulkcount);
    }
    lseek(slave->repldbfd,slave->repldboff,SEEK_SET);
    buflen = read(slave->repldbfd,buf,REDIS_IOBUF_LEN);
    if (buflen <= 0) {
        redisLog(REDIS_WARNING,"Read error sending DB to slave: %s",
            (buflen == 0) ? "premature EOF" : strerror(errno));
        freeClient(slave);
        return;
    }
    if ((nwritten = write(fd,buf,buflen)) == -1) {
        redisLog(REDIS_VERBOSE,"Write error sending DB to slave: %s",
            strerror(errno));
        freeClient(slave);
        return;
    }
    slave->repldboff += nwritten;
    if (slave->repldboff == slave->repldbsize) {
        close(slave->repldbfd);
        slave->repldbfd = -1;
        aeDeleteFileEvent(server.el,slave->fd,AE_WRITABLE);
        slave->replstate = REDIS_REPL_ONLINE;
        if (aeCreateFileEvent(server.el, slave->fd, AE_WRITABLE,
            sendReplyToClient, slave) == AE_ERR) {
            freeClient(slave);
            return;
        }
        redisLog(REDIS_NOTICE,"Synchronization with slave succeeded");
    }
}

/* This function is called at the end of every backgrond saving.
 * The argument bgsaveerr is REDIS_OK if the background saving succeeded
 * otherwise REDIS_ERR is passed to the function.
 *
 * The goal of this function is to handle slaves waiting for a successful
 * background saving in order to perform non-blocking synchronization. */
void updateSlavesWaitingBgsave(int bgsaveerr) {
    listNode *ln;
    int startbgsave = 0;
    listIter li;

    listRewind(server.slaves,&li);
    while((ln = listNext(&li))) {
        redisClient *slave = ln->value;

        if (slave->replstate == REDIS_REPL_WAIT_BGSAVE_START) {
            startbgsave = 1;
            slave->replstate = REDIS_REPL_WAIT_BGSAVE_END;
        } else if (slave->replstate == REDIS_REPL_WAIT_BGSAVE_END) {
            struct redis_stat buf;

            if (bgsaveerr != REDIS_OK) {
                freeClient(slave);
                redisLog(REDIS_WARNING,"SYNC failed. BGSAVE child returned an error");
                continue;
            }
            if ((slave->repldbfd = open(server.rdb_filename,O_RDONLY)) == -1 ||
                redis_fstat(slave->repldbfd,&buf) == -1) {
                freeClient(slave);
                redisLog(REDIS_WARNING,"SYNC failed. Can't open/stat DB after BGSAVE: %s", strerror(errno));
                continue;
            }
            slave->repldboff = 0;
            slave->repldbsize = buf.st_size;
            slave->replstate = REDIS_REPL_SEND_BULK;
            aeDeleteFileEvent(server.el,slave->fd,AE_WRITABLE);
            if (aeCreateFileEvent(server.el, slave->fd, AE_WRITABLE, sendBulkToSlave, slave) == AE_ERR) {
                freeClient(slave);
                continue;
            }
        }
    }
    if (startbgsave) {
        if (rdbSaveBackground(server.rdb_filename) != REDIS_OK) {
            listIter li;

            listRewind(server.slaves,&li);
            redisLog(REDIS_WARNING,"SYNC failed. BGSAVE failed");
            while((ln = listNext(&li))) {
                redisClient *slave = ln->value;

                if (slave->replstate == REDIS_REPL_WAIT_BGSAVE_START)
                    freeClient(slave);
            }
        }
    }
}

/* ----------------------------------- SLAVE -------------------------------- */

/* Abort the async download of the bulk dataset while SYNC-ing with master */
void replicationAbortSyncTransfer(void) {
    redisAssert(server.repl_state == REDIS_REPL_TRANSFER);

    aeDeleteFileEvent(server.el,server.repl_transfer_s,AE_READABLE);
    close(server.repl_transfer_s);
    close(server.repl_transfer_fd);
    unlink(server.repl_transfer_tmpfile);
    zfree(server.repl_transfer_tmpfile);
    server.repl_state = REDIS_REPL_CONNECT;
}

/* Asynchronously read the SYNC payload we receive from a master */
#define REPL_MAX_WRITTEN_BEFORE_FSYNC (1024*1024*8) /* 8 MB */
void readSyncBulkPayload(aeEventLoop *el, int fd, void *privdata, int mask) {
    char buf[4096];
    ssize_t nread, readlen;
    off_t left;
    REDIS_NOTUSED(el);
    REDIS_NOTUSED(privdata);
    REDIS_NOTUSED(mask);

    /* If repl_transfer_size == -1 we still have to read the bulk length
     * from the master reply. */
    if (server.repl_transfer_size == -1) {
        if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout*1000) == -1) {
            redisLog(REDIS_WARNING,
                "I/O error reading bulk count from MASTER: %s",
                strerror(errno));
            goto error;
        }

        if (buf[0] == '-') {
            redisLog(REDIS_WARNING,
                "MASTER aborted replication with an error: %s",
                buf+1);
            goto error;
        } else if (buf[0] == '\0') {
            /* At this stage just a newline works as a PING in order to take
             * the connection live. So we refresh our last interaction
             * timestamp. */
            server.repl_transfer_lastio = server.unixtime;
            return;
        } else if (buf[0] != '$') {
            redisLog(REDIS_WARNING,"Bad protocol from MASTER, the first byte is not '$', are you sure the host and port are right?");
            goto error;
        }
        server.repl_transfer_size = strtol(buf+1,NULL,10);
        redisLog(REDIS_NOTICE,
            "MASTER <-> SLAVE sync: receiving %ld bytes from master",
            server.repl_transfer_size);
        return;
    }

    /* Read bulk data */
    left = server.repl_transfer_size - server.repl_transfer_read;
    readlen = (left < (signed)sizeof(buf)) ? left : (signed)sizeof(buf);
    nread = read(fd,buf,readlen);
    if (nread <= 0) {
        redisLog(REDIS_WARNING,"I/O error trying to sync with MASTER: %s",
            (nread == -1) ? strerror(errno) : "connection lost");
        replicationAbortSyncTransfer();
        return;
    }
    server.repl_transfer_lastio = server.unixtime;
    if (write(server.repl_transfer_fd,buf,nread) != nread) {
        redisLog(REDIS_WARNING,"Write error or short write writing to the DB dump file needed for MASTER <-> SLAVE synchronization: %s", strerror(errno));
        goto error;
    }
    server.repl_transfer_read += nread;

    /* Sync data on disk from time to time, otherwise at the end of the transfer
     * we may suffer a big delay as the memory buffers are copied into the
     * actual disk. */
    if (server.repl_transfer_read >=
        server.repl_transfer_last_fsync_off + REPL_MAX_WRITTEN_BEFORE_FSYNC)
    {
        off_t sync_size = server.repl_transfer_read -
                          server.repl_transfer_last_fsync_off;
        rdb_fsync_range(server.repl_transfer_fd,
            server.repl_transfer_last_fsync_off, sync_size);
        server.repl_transfer_last_fsync_off += sync_size;
    }

    /* Check if the transfer is now complete */
    if (server.repl_transfer_read == server.repl_transfer_size) {
        if (rename(server.repl_transfer_tmpfile,server.rdb_filename) == -1) {
            redisLog(REDIS_WARNING,"Failed trying to rename the temp DB into dump.rdb in MASTER <-> SLAVE synchronization: %s", strerror(errno));
            replicationAbortSyncTransfer();
            return;
        }
        redisLog(REDIS_NOTICE, "MASTER <-> SLAVE sync: Loading DB in memory");
        emptyDb();
        /* Before loading the DB into memory we need to delete the readable
         * handler, otherwise it will get called recursively since
         * rdbLoad() will call the event loop to process events from time to
         * time for non blocking loading. */
        aeDeleteFileEvent(server.el,server.repl_transfer_s,AE_READABLE);
        if (rdbLoad(server.rdb_filename) != REDIS_OK) {
            redisLog(REDIS_WARNING,"Failed trying to load the MASTER synchronization DB from disk");
            replicationAbortSyncTransfer();
            return;
        }
        /* Final setup of the connected slave <- master link */
        zfree(server.repl_transfer_tmpfile);
        close(server.repl_transfer_fd);
        server.master = createClient(server.repl_transfer_s);
        server.master->flags |= REDIS_MASTER;
        server.master->authenticated = 1;
        server.repl_state = REDIS_REPL_CONNECTED;
        redisLog(REDIS_NOTICE, "MASTER <-> SLAVE sync: Finished with success");
        /* Restart the AOF subsystem now that we finished the sync. This
         * will trigger an AOF rewrite, and when done will start appending
         * to the new file. */
        if (server.aof_state != REDIS_AOF_OFF) {
            int retry = 10;

            stopAppendOnly();
            while (retry-- && startAppendOnly() == REDIS_ERR) {
                redisLog(REDIS_WARNING,"Failed enabling the AOF after successful master synchrnization! Trying it again in one second.");
                sleep(1);
            }
            if (!retry) {
                redisLog(REDIS_WARNING,"FATAL: this slave instance finished the synchronization with its master, but the AOF can't be turned on. Exiting now.");
                exit(1);
            }
        }
    }

    return;

error:
    replicationAbortSyncTransfer();
    return;
}

/* Send a synchronous command to the master. Used to send AUTH and
 * REPLCONF commands before starting the replication with SYNC.
 *
 * On success NULL is returned.
 * On error an sds string describing the error is returned.
 */
char *sendSynchronousCommand(int fd, ...) {
    va_list ap;
    sds cmd = sdsempty();
    char *arg, buf[256];

    /* Create the command to send to the master, we use simple inline
     * protocol for simplicity as currently we only send simple strings. */
    va_start(ap,fd);
    while(1) {
        arg = va_arg(ap, char*);
        if (arg == NULL) break;

        if (sdslen(cmd) != 0) cmd = sdscatlen(cmd," ",1);
        cmd = sdscat(cmd,arg);
    }
    cmd = sdscatlen(cmd,"\r\n",2);

    /* Transfer command to the server. */
    if (syncWrite(fd,cmd,sdslen(cmd),server.repl_syncio_timeout*1000) == -1) {
        sdsfree(cmd);
        return sdscatprintf(sdsempty(),"Writing to master: %s",
                strerror(errno));
    }
    sdsfree(cmd);

    /* Read the reply from the server. */
    if (syncReadLine(fd,buf,sizeof(buf),server.repl_syncio_timeout*1000) == -1)
    {
        return sdscatprintf(sdsempty(),"Reading from master: %s",
                strerror(errno));
    }

    /* Check for errors from the server. */
    if (buf[0] != '+') {
        return sdscatprintf(sdsempty(),"Error from master: %s", buf);
    }

    return NULL; /* No errors. */
}

void syncWithMaster(aeEventLoop *el, int fd, void *privdata, int mask) {
    char tmpfile[256], *err;
    int dfd, maxtries = 5;
    int sockerr = 0;
    socklen_t errlen = sizeof(sockerr);
    REDIS_NOTUSED(el);
    REDIS_NOTUSED(privdata);
    REDIS_NOTUSED(mask);

    /* If this event fired after the user turned the instance into a master
     * with SLAVEOF NO ONE we must just return ASAP. */
    if (server.repl_state == REDIS_REPL_NONE) {
        close(fd);
        return;
    }

    /* Check for errors in the socket. */
    if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &sockerr, &errlen) == -1)
        sockerr = errno;
    if (sockerr) {
        aeDeleteFileEvent(server.el,fd,AE_READABLE|AE_WRITABLE);
        redisLog(REDIS_WARNING,"Error condition on socket for SYNC: %s",
            strerror(sockerr));
        goto error;
    }

    /* If we were connecting, it's time to send a non blocking PING, we want to
     * make sure the master is able to reply before going into the actual
     * replication process where we have long timeouts in the order of
     * seconds (in the meantime the slave would block). */
    if (server.repl_state == REDIS_REPL_CONNECTING) {
        redisLog(REDIS_NOTICE,"Non blocking connect for SYNC fired the event.");
        /* Delete the writable event so that the readable event remains
         * registered and we can wait for the PONG reply. */
        aeDeleteFileEvent(server.el,fd,AE_WRITABLE);
        server.repl_state = REDIS_REPL_RECEIVE_PONG;
        /* Send the PING, don't check for errors at all, we have the timeout
         * that will take care about this. */
        syncWrite(fd,"PING\r\n",6,100);
        return;
    }

    /* Receive the PONG command. */
    if (server.repl_state == REDIS_REPL_RECEIVE_PONG) {
        char buf[1024];

        /* Delete the readable event, we no longer need it now that there is
         * the PING reply to read. */
        aeDeleteFileEvent(server.el,fd,AE_READABLE);

        /* Read the reply with explicit timeout. */
        buf[0] = '\0';
        if (syncReadLine(fd,buf,sizeof(buf),
            server.repl_syncio_timeout*1000) == -1)
        {
            redisLog(REDIS_WARNING,
                "I/O error reading PING reply from master: %s",
                strerror(errno));
            goto error;
        }

        /* We don't care about the reply, it can be +PONG or an error since
         * the server requires AUTH. As long as it replies correctly, it's
         * fine from our point of view. */
        if (buf[0] != '-' && buf[0] != '+') {
            redisLog(REDIS_WARNING,"Unexpected reply to PING from master.");
            goto error;
        } else {
            redisLog(REDIS_NOTICE,
                "Master replied to PING, replication can continue...");
        }
    }

    /* AUTH with the master if required. */
    if(server.masterauth) {
        err = sendSynchronousCommand(fd,"AUTH",server.masterauth,NULL);
        if (err) {
            redisLog(REDIS_WARNING,"Unable to AUTH to MASTER: %s",err);
            sdsfree(err);
            goto error;
        }
    }

    /* Set the slave port, so that Master's INFO command can list the
     * slave listening port correctly. */
    {
        sds port = sdsfromlonglong(server.port);
        err = sendSynchronousCommand(fd,"REPLCONF","listening-port",port,
                                         NULL);
        sdsfree(port);
        /* Ignore the error if any, not all the Redis versions support
         * REPLCONF listening-port. */
        if (err) {
            redisLog(REDIS_NOTICE,"(non critical): Master does not understand REPLCONF listening-port: %s", err);
            sdsfree(err);
        }
    }

    /* Issue the SYNC command */
    if (syncWrite(fd,"SYNC\r\n",6,server.repl_syncio_timeout*1000) == -1) {
        redisLog(REDIS_WARNING,"I/O error writing to MASTER: %s",
            strerror(errno));
        goto error;
    }

    /* Prepare a suitable temp file for bulk transfer */
    while(maxtries--) {
        snprintf(tmpfile,256,
            "temp-%d.%ld.rdb",(int)server.unixtime,(long int)getpid());
        dfd = open(tmpfile,O_CREAT|O_WRONLY|O_EXCL,0644);
        if (dfd != -1) break;
        sleep(1);
    }
    if (dfd == -1) {
        redisLog(REDIS_WARNING,"Opening the temp file needed for MASTER <-> SLAVE synchronization: %s",strerror(errno));
        goto error;
    }

    /* Setup the non blocking download of the bulk file. */
    if (aeCreateFileEvent(server.el,fd, AE_READABLE,readSyncBulkPayload,NULL)
            == AE_ERR)
    {
        redisLog(REDIS_WARNING,"Can't create readable event for SYNC");
        goto error;
    }

    server.repl_state = REDIS_REPL_TRANSFER;
    server.repl_transfer_size = -1;
    server.repl_transfer_read = 0;
    server.repl_transfer_last_fsync_off = 0;
    server.repl_transfer_fd = dfd;
    server.repl_transfer_lastio = server.unixtime;
    server.repl_transfer_tmpfile = zstrdup(tmpfile);
    return;

error:
    close(fd);
    server.repl_transfer_s = -1;
    server.repl_state = REDIS_REPL_CONNECT;
    return;
}

int connectWithMaster(void) {
    int fd;

    fd = anetTcpNonBlockConnect(NULL,server.masterhost,server.masterport);
    if (fd == -1) {
        redisLog(REDIS_WARNING,"Unable to connect to MASTER: %s",
            strerror(errno));
        return REDIS_ERR;
    }

    if (aeCreateFileEvent(server.el,fd,AE_READABLE|AE_WRITABLE,syncWithMaster,NULL) ==
            AE_ERR)
    {
        close(fd);
        redisLog(REDIS_WARNING,"Can't create readable event for SYNC");
        return REDIS_ERR;
    }

    server.repl_transfer_lastio = server.unixtime;
    server.repl_transfer_s = fd;
    server.repl_state = REDIS_REPL_CONNECTING;
    return REDIS_OK;
}

/* This function can be called when a non blocking connection is currently
 * in progress to undo it. */
void undoConnectWithMaster(void) {
    int fd = server.repl_transfer_s;

    redisAssert(server.repl_state == REDIS_REPL_CONNECTING ||
                server.repl_state == REDIS_REPL_RECEIVE_PONG);
    aeDeleteFileEvent(server.el,fd,AE_READABLE|AE_WRITABLE);
    close(fd);
    server.repl_transfer_s = -1;
    server.repl_state = REDIS_REPL_CONNECT;
}

void slaveofCommand(redisClient *c) {
    if (!strcasecmp(c->argv[1]->ptr,"no") &&
        !strcasecmp(c->argv[2]->ptr,"one")) {
        if (server.masterhost) {
            sdsfree(server.masterhost);
            server.masterhost = NULL;
            if (server.master) freeClient(server.master);
            if (server.repl_state == REDIS_REPL_TRANSFER)
                replicationAbortSyncTransfer();
            else if (server.repl_state == REDIS_REPL_CONNECTING ||
                     server.repl_state == REDIS_REPL_RECEIVE_PONG)
                undoConnectWithMaster();
            server.repl_state = REDIS_REPL_NONE;
            redisLog(REDIS_NOTICE,"MASTER MODE enabled (user request)");
        }
    } else {
        long port;

        if ((getLongFromObjectOrReply(c, c->argv[2], &port, NULL) != REDIS_OK))
            return;

        /* Check if we are already attached to the specified slave */
        if (server.masterhost && !strcasecmp(server.masterhost,c->argv[1]->ptr)
            && server.masterport == port) {
            redisLog(REDIS_NOTICE,"SLAVE OF would result into synchronization with the master we are already connected with. No operation performed.");
            addReplySds(c,sdsnew("+OK Already connected to specified master\r\n"));
            return;
        }
        /* There was no previous master or the user specified a different one,
         * we can continue. */
        sdsfree(server.masterhost);
        server.masterhost = sdsdup(c->argv[1]->ptr);
        server.masterport = port;
        if (server.master) freeClient(server.master);
        disconnectSlaves(); /* Force our slaves to resync with us as well. */
        if (server.repl_state == REDIS_REPL_TRANSFER)
            replicationAbortSyncTransfer();
        server.repl_state = REDIS_REPL_CONNECT;
        redisLog(REDIS_NOTICE,"SLAVE OF %s:%d enabled (user request)",
            server.masterhost, server.masterport);
    }
    addReply(c,shared.ok);
}

/* --------------------------- REPLICATION CRON  ---------------------------- */

void replicationCron(void) {
    /* Non blocking connection timeout? */
    if (server.masterhost &&
        (server.repl_state == REDIS_REPL_CONNECTING ||
         server.repl_state == REDIS_REPL_RECEIVE_PONG) &&
        (time(NULL)-server.repl_transfer_lastio) > server.repl_timeout)
    {
        redisLog(REDIS_WARNING,"Timeout connecting to the MASTER...");
        undoConnectWithMaster();
    }

    /* Bulk transfer I/O timeout? */
    if (server.masterhost && server.repl_state == REDIS_REPL_TRANSFER &&
        (time(NULL)-server.repl_transfer_lastio) > server.repl_timeout)
    {
        redisLog(REDIS_WARNING,"Timeout receiving bulk data from MASTER...");
        replicationAbortSyncTransfer();
    }

    /* Timed out master when we are an already connected slave? */
    if (server.masterhost && server.repl_state == REDIS_REPL_CONNECTED &&
        (time(NULL)-server.master->lastinteraction) > server.repl_timeout)
    {
        redisLog(REDIS_WARNING,"MASTER time out: no data nor PING received...");
        freeClient(server.master);
    }

    /* Check if we should connect to a MASTER */
    if (server.repl_state == REDIS_REPL_CONNECT) {
        redisLog(REDIS_NOTICE,"Connecting to MASTER...");
        if (connectWithMaster() == REDIS_OK) {
            redisLog(REDIS_NOTICE,"MASTER <-> SLAVE sync started");
        }
    }
    
    /* If we have attached slaves, PING them from time to time.
     * So slaves can implement an explicit timeout to masters, and will
     * be able to detect a link disconnection even if the TCP connection
     * will not actually go down. */
    if (!(server.cronloops % (server.repl_ping_slave_period * REDIS_HZ))) {
        listIter li;
        listNode *ln;

        listRewind(server.slaves,&li);
        while((ln = listNext(&li))) {
            redisClient *slave = ln->value;

            /* Don't ping slaves that are in the middle of a bulk transfer
             * with the master for first synchronization. */
            if (slave->replstate == REDIS_REPL_SEND_BULK) continue;
            if (slave->replstate == REDIS_REPL_ONLINE) {
                /* If the slave is online send a normal ping */
                addReplySds(slave,sdsnew("*1\r\n$4\r\nPING\r\n"));
            } else {
                /* Otherwise we are in the pre-synchronization stage.
                 * Just a newline will do the work of refreshing the
                 * connection last interaction time, and at the same time
                 * we'll be sure that being a single char there are no
                 * short-write problems. */
                if (write(slave->fd, "\n", 1) == -1) {
                    /* Don't worry, it's just a ping. */
                }
            }
        }
    }
}