1. Add default rtconfig.h header.
2. Fix IP reset issue.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

* Update drivers.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

* [Nuvoton] Update drivers.

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* Update menu-option.

1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.

* Fix control function in I2C driver.

* Add sdk_dist.py and ADC touching calibration function.
Co-authored-by: NWayne Lin <wclin@nuvoton.com>

1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.

* [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题

* format codes

* [libc] 整理格式

* refresh projects

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.

(1) Support NK-N9H30 board.
(2) Change Mutex's flag to RT_IPC_FLAG_PRIO from RT_IPC_FLAG_FIFO.

1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND.
2. Correct enter-quad-mode routine in board_dec.c.
3. Use RT_ASSERT to catch system-call-exceptions.

1. Add 980 drv_usbd.
2. EMAC - move MDC CLK divider before EMAC initialization.
3. Correct NUC980 and M480 CAN RX_MSG_ID_INDEX definition.
4. add USBD cdc demo - vcom_echo.
5. mnt - add mount_table definition.

1. Fix porting driver.
2. Add NAU8822 audio codec driver.
3. Add NUC980 I2S porting driver.

1. Make up sources and bugfix.
2. Add nu_gpio_pin_get.
3. Add PM operator in USB host driver.
4. Support NUC980 stage 1 and add nk-980iot board.

Fix rtt port issues.

2. Add choice menu for lcd configure
3. Remove origin sdcard driver and add new mmc driver that use kernel
mmc stack for s3c2440

1、加入Kconfig以支持图形化菜单配置
2、编译脚本中添加动态模块编译参数
3、开启自动初始化机制支持
4、重构串口驱动以解决开启posix支持后终端无响应问题
5、解决dm9000网卡驱动link up问题
6、添加mnt.c文件用来挂载文件系统

1. modify at32_msp default configuration 2. add hwtimer driver and fix up some driver errors 3. update related files