[update] add STM32MP1xx template project.

bsp/stm32/libraries/templates/stm32mp1xx/.config

+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+CONFIG_RT_USING_MEMHEAP=y
+# CONFIG_RT_USING_NOHEAP is not set
+# CONFIG_RT_USING_SMALL_MEM is not set
+# CONFIG_RT_USING_SLAB is not set
+CONFIG_RT_USING_MEMHEAP_AS_HEAP=y
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart4"
+CONFIG_RT_VER_NUM=0x40003
+CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M4=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+# CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+CONFIG_SOC_FAMILY_STM32=y
+CONFIG_SOC_SERIES_STM32MP1=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_STM32MP157A=y
+
+#
+# Onboard Peripheral Drivers
+#
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART4=y
+# CONFIG_BSP_UART4_RX_USING_DMA is not set
+# CONFIG_BSP_UART4_TX_USING_DMA is not set
+# CONFIG_BSP_USING_CRC is not set
+# CONFIG_BSP_USING_RNG is not set
+# CONFIG_BSP_USING_UDID is not set
+
+#
+# Board extended module Drivers
+#

bsp/stm32/libraries/templates/stm32mp1xx/.gitignore

+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h

bsp/stm32/libraries/templates/stm32mp1xx/Kconfig

+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"
+

bsp/stm32/libraries/templates/stm32mp1xx/README.md

+# BSP README 模板
+
+## 简介
+
+本文档为 xxx 开发板的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+【此处简单介绍一下开发板】
+
+开发板外观如下图所示：
+
+![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下：
+
+- MCU：STM32MP157AACx
+- 常用外设
+  - LED：4个 ，LD4 (PA14)， LD6 (PA13)，LD7 (PH7)，LD8 (PD11)
+  - 按键，4个，WAKE_UP，RESET (NRST)，USER1(PA14)，USER2 (PA13)
+- 常用接口：USB 转串口、SD 卡接口、以太网接口、MIPI接口、USB HOST、Audio、HDMI、Arduino
+- 调试接口，标准 JTAG/SWD
+
+开发板更多详细信息请参考【厂商名】 [xxx开发板介绍](https://xxx)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设** | **支持情况** |     **备注**     |
+| :----------- | :----------: | :--------------: |
+| USB 转串口   |     支持     |                  |
+| SD卡         |   暂不支持   |                  |
+| 以太网       |   暂不支持   |                  |
+| 音频接口     |   暂不支持   |                  |
+| **片上外设** | **支持情况** |     **备注**     |
+| GPIO         |     支持     |                  |
+| UART         |     支持     | UART4 (ST-Link)  |
+| EXTI         |     支持     |                  |
+| SPI          |     支持     |                  |
+| TIM          |     支持     |                  |
+| LPTIM        |     支持     |                  |
+| I2C          |     支持     | 软件、硬件都支持 |
+| ADC          |     支持     |                  |
+| DAC          |     支持     |                  |
+| WWDG         |     支持     |                  |
+| USB Device   |   暂不支持   |                  |
+| USB Host     |   暂不支持   |                  |
+
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+
+双击 project.eww 文件，打开 IAR 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 xxx 仿真器下载程序，在通过 xxx 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，【这里写开发板运行起来之后的现象，如：LED 闪烁等】。
+
+ 连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     3.1.1 build Nov 19 2018
+ 2006 - 2018 Copyright by rt-thread team
+msh >
+```
+
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口4 的功能，如果需更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
+
+## 注意事项
+
+- xxx
+
+## 联系人信息
+
+维护人:
+
+-  [xxx](https://个人主页), 邮箱：<xxx@xxx.com>
+

bsp/stm32/libraries/templates/stm32mp1xx/SConscript

+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/stm32/libraries/templates/stm32mp1xx/SConstruct

+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+stm32_library = 'STM32MPxx_HAL'
+rtconfig.BSP_LIBRARY_TYPE = stm32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/stm32/libraries/templates/stm32mp1xx/applications/SConscript

+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/stm32/libraries/templates/stm32mp1xx/applications/main.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-05     thread-liu   first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LD8 pin: PD11 */
+#define LED8_PIN    GET_PIN(D, 11)
+
+int main(void) 
+{
+    int count = 1;
+    /* set LD8 pin mode to output */
+    rt_pin_mode(LED8_PIN, PIN_MODE_OUTPUT);
+    
+    while (count++)
+    {
+        rt_pin_write(LED8_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);    
+        rt_pin_write(LED8_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+    
+    return RT_EOK;
+}

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/.mxproject

+[PreviousGenFiles]
+HeaderPath=D:/3_work/GitRepositories/rt-thread/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc
+HeaderFiles=stm32mp1xx_it.h;stm32mp1xx_hal_conf.h;main.h;
+SourcePath=D:/3_work/GitRepositories/rt-thread/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src
+SourceFiles=stm32mp1xx_it.c;stm32mp1xx_hal_msp.c;main.c;
+
+[PreviousLibFiles]
+LibFiles=Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_adc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_adc_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_adc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_rcc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_rcc_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_hsem.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_mdma.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_cortex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_def.h;Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_exti.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dac.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dac_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_ipcc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_lptim.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_spi.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_spi_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_tim.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_tim_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_uart.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_uart_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_wwdg.h;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_adc.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_gpio.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hsem.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdma.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cortex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_exti.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_ipcc.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart_ex.c;Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_wwdg.c;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_adc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_adc_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_ll_adc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_rcc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_rcc_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_gpio_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_hsem.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dma_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_mdma.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_pwr_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_cortex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_def.h;Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_exti.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dac.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_dac_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_ipcc.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_lptim.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_spi.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_spi_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_tim.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_tim_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_uart.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_uart_ex.h;Drivers/STM32MP1xx_HAL_Driver/Inc/stm32mp1xx_hal_wwdg.h;Drivers/CMSIS/Device/ST/STM32MP1xx/Include/stm32mp157axx_cm4.h;Drivers/CMSIS/Device/ST/STM32MP1xx/Include/stm32mp1xx.h;Drivers/CMSIS/Device/ST/STM32MP1xx/Include/system_stm32mp1xx.h;Drivers/CMSIS/Device/ST/STM32MP1xx/Source/Templates/system_stm32mp1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
+
+[PreviousUsedIarFiles]
+SourceFiles=..\CM4\Src\main.c;..\CM4\Src\stm32mp1xx_it.c;..\CM4\Src\stm32mp1xx_hal_msp.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_adc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_gpio.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hsem.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdma.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cortex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_exti.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_ipcc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_wwdg.c;..\Common/System/system_stm32mp1xx.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_adc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_adc_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_gpio.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hsem.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdma.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cortex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_exti.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dac_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_ipcc.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart_ex.c;..\Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_wwdg.c;..\Common/System/system_stm32mp1xx.c;..\Drivers/CMSIS/Device/ST/STM32MP1xx/Source/Templates/system_stm32mp1xx.c;;
+HeaderPath=..\Drivers\STM32MP1xx_HAL_Driver\Inc;..\Drivers\STM32MP1xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32MP1xx\Include;..\Drivers\CMSIS\Include;..\CM4\Inc;
+CDefines=CORE_CM4;CORE_CM4;CORE_CM4;USE_HAL_DRIVER;STM32MP157Axx;USE_HAL_DRIVER;USE_HAL_DRIVER;
+

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Inc/main.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define STLINK_RX_Pin GPIO_PIN_11
+#define STLINK_RX_GPIO_Port GPIOG
+#define STLINK_TX_Pin GPIO_PIN_2
+#define STLINK_TX_GPIO_Port GPIOB
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h

+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_CONF_H
+#define STM32MP1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+#define HAL_ADC_MODULE_ENABLED
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+#define HAL_DAC_MODULE_ENABLED
+/*#define HAL_DCMI_MODULE_ENABLED   */
+/*#define HAL_DSI_MODULE_ENABLED   */
+/*#define HAL_DFSDM_MODULE_ENABLED   */
+/*#define HAL_DTS_MODULE_ENABLED   */
+/*#define HAL_ETH_MODULE_ENABLED   */
+/*#define HAL_FDCAN_MODULE_ENABLED   */
+/*#define HAL_HASH_MODULE_ENABLED   */
+/*#define HAL_HCD_MODULE_ENABLED   */
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/*#define HAL_I2S_MODULE_ENABLED   */
+#define HAL_IPCC_MODULE_ENABLED
+/*#define HAL_IWDG_MODULE_ENABLED   */
+#define HAL_LPTIM_MODULE_ENABLED
+/*#define HAL_LTDC_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+/*#define HAL_QSPI_MODULE_ENABLED   */
+/*#define HAL_RNG_MODULE_ENABLED   */
+/*#define HAL_SAI_MODULE_ENABLED   */
+/*#define HAL_SD_MODULE_ENABLED   */
+/*#define HAL_MMC_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_SPDIFRX_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_TAMP_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
+#define USE_HAL_UART_REGISTER_CALLBACKS   0u
+#define USE_HAL_USART_REGISTER_CALLBACKS  0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+#define HSE_VALUE    (24000000U) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (64000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 
+  *        Timeout value 
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT) 
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */  
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+  #define LSI_VALUE            32000U
+#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U /*!< tick interrupt priority (lowest by default) */
+                                                                /*  Warning: Must be set to higher priority for HAL_Delay()  */
+                                                                /*  and HAL_GetTick() usage under interrupt context          */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     0U
+#define  DATA_CACHE_ENABLE            0U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */ 
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32mp1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32mp1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+  #include "stm32mp1xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32mp1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+ #include "stm32mp1xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hcd.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32mp1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32mp1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32mp1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32mp1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32mp1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32mp1xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32mp1xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_TAMP_MODULE_ENABLED
+ #include "stm32mp1xx_hal_tamp.h"
+#endif /* HAL_TAMP_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32mp1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32mp1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */    
+    
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Inc/stm32mp1xx_it.h

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_IT_H
+#define __STM32MP1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void WWDG1_IRQHandler(void);
+void LPTIM1_IRQHandler(void);
+void IPCC_RX1_IRQHandler(void);
+void IPCC_TX1_IRQHandler(void);
+void LPTIM2_IRQHandler(void);
+void LPTIM3_IRQHandler(void);
+void LPTIM4_IRQHandler(void);
+void LPTIM5_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Src/stm32mp1xx_it.c

+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32mp1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern IPCC_HandleTypeDef hipcc;
+extern LPTIM_HandleTypeDef hlptim1;
+extern LPTIM_HandleTypeDef hlptim2;
+extern LPTIM_HandleTypeDef hlptim3;
+extern LPTIM_HandleTypeDef hlptim4;
+extern LPTIM_HandleTypeDef hlptim5;
+extern WWDG_HandleTypeDef hwwdg1;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32MP1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32mp1xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles Window watchdog interrupt.
+  */
+void WWDG1_IRQHandler(void)
+{
+  /* USER CODE BEGIN WWDG1_IRQn 0 */
+
+  /* USER CODE END WWDG1_IRQn 0 */
+  HAL_WWDG_IRQHandler(&hwwdg1);
+  /* USER CODE BEGIN WWDG1_IRQn 1 */
+
+  /* USER CODE END WWDG1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM1 global interrupt.
+  */
+void LPTIM1_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM1_IRQn 0 */
+
+  /* USER CODE END LPTIM1_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim1);
+  /* USER CODE BEGIN LPTIM1_IRQn 1 */
+
+  /* USER CODE END LPTIM1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles IPCC RX1 occupied interrupt.
+  */
+void IPCC_RX1_IRQHandler(void)
+{
+  /* USER CODE BEGIN IPCC_RX1_IRQn 0 */
+
+  /* USER CODE END IPCC_RX1_IRQn 0 */
+  HAL_IPCC_RX_IRQHandler(&hipcc);
+  /* USER CODE BEGIN IPCC_RX1_IRQn 1 */
+
+  /* USER CODE END IPCC_RX1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles IPCC TX1 free interrupt.
+  */
+void IPCC_TX1_IRQHandler(void)
+{
+  /* USER CODE BEGIN IPCC_TX1_IRQn 0 */
+
+  /* USER CODE END IPCC_TX1_IRQn 0 */
+  HAL_IPCC_TX_IRQHandler(&hipcc);
+  /* USER CODE BEGIN IPCC_TX1_IRQn 1 */
+
+  /* USER CODE END IPCC_TX1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM2 global interrupt.
+  */
+void LPTIM2_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM2_IRQn 0 */
+
+  /* USER CODE END LPTIM2_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim2);
+  /* USER CODE BEGIN LPTIM2_IRQn 1 */
+
+  /* USER CODE END LPTIM2_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM3 global interrupt.
+  */
+void LPTIM3_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM3_IRQn 0 */
+
+  /* USER CODE END LPTIM3_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim3);
+  /* USER CODE BEGIN LPTIM3_IRQn 1 */
+
+  /* USER CODE END LPTIM3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM4 global interrupt.
+  */
+void LPTIM4_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM4_IRQn 0 */
+
+  /* USER CODE END LPTIM4_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim4);
+  /* USER CODE BEGIN LPTIM4_IRQn 1 */
+
+  /* USER CODE END LPTIM4_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM5 global interrupt.
+  */
+void LPTIM5_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM5_IRQn 0 */
+
+  /* USER CODE END LPTIM5_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim5);
+  /* USER CODE BEGIN LPTIM5_IRQn 1 */
+
+  /* USER CODE END LPTIM5_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/Common/System/system_stm32mp1xx.c

+/**
+  ******************************************************************************
+  * @file    system_stm32mp1xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32mp1xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock frequency, it can
+  *                                  be used by the user application to setup
+  *                                  the SysTick timer or configure other
+  *                                  parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  *
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx_system
+  * @{
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32mp1xx_hal.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Defines
+  * @{
+  */
+
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on EVAL board as data memory  */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x400. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) each time HAL_RCC_ClockConfig() is called to configure the system clock
+         frequency
+         Note: If you use this function to configure the system clock;
+               then there is no need to call the first functions listed above,
+               since SystemCoreClock variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = HSI_VALUE;
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) 
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Functions
+  * @{
+  */
+
+  /**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+#if defined (CORE_CM4)
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+   SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#if defined (VECT_TAB_SRAM)
+  SCB->VTOR = MCU_AHB_SRAM | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif
+  /* Disable all interrupts and events */
+  CLEAR_REG(EXTI_C2->IMR1);
+  CLEAR_REG(EXTI_C2->IMR2);
+  CLEAR_REG(EXTI_C2->IMR3);
+  CLEAR_REG(EXTI_C2->EMR1);
+  CLEAR_REG(EXTI_C2->EMR2);
+  CLEAR_REG(EXTI_C2->EMR3);
+#else
+#error Please #define CORE_CM4
+#endif	                         
+}
+
+/**
+   * @brief Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock frequency (Hz),
+  *         it can be used by the user application to setup the SysTick timer or
+  *         configure other parameters.
+  *
+  * @note   Each time the core clock changes, this function must be called to
+  *         update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the
+  *             HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the
+  *             HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is CSI, SystemCoreClock will contain the
+  *             CSI_VALUE(***)
+  *
+  *           - If SYSCLK source is PLL3_P, SystemCoreClock will contain the
+  *             HSI_VALUE(*) or the HSE_VALUE(*) or the CSI_VALUE(***)
+  *             multiplied/divided by the PLL3 factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *             (default value 64 MHz) but the real value may vary depending
+  *             on the variations in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *              (default value 24 MHz), user has to ensure that HSE_VALUE is
+  *              same as the real frequency of the crystal used. Otherwise, this
+  *              function may have wrong result.
+  *
+  *         (***) CSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *              (default value 4 MHz)but the real value may vary depending
+  *              on the variations in voltage and temperature.
+  *
+  *         - The result of this function could be not correct when using
+  *           fractional value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t   pllsource, pll3m, pll3fracen;
+  float fracn1, pll3vco;
+
+  switch (RCC->MSSCKSELR & RCC_MSSCKSELR_MCUSSRC)
+  {
+  case 0x00:  /* HSI used as system clock source */
+    SystemCoreClock = (HSI_VALUE >> (RCC->HSICFGR & RCC_HSICFGR_HSIDIV));
+    break;
+
+  case 0x01:  /* HSE used as system clock source */
+    SystemCoreClock = HSE_VALUE;
+    break;
+
+  case 0x02:  /* CSI used as system clock source */
+    SystemCoreClock = CSI_VALUE;
+    break;
+
+  case 0x03:  /* PLL3_P used as system clock source */
+    pllsource = (RCC->RCK3SELR & RCC_RCK3SELR_PLL3SRC);
+    pll3m = ((RCC->PLL3CFGR1 & RCC_PLL3CFGR1_DIVM3) >> RCC_PLL3CFGR1_DIVM3_Pos) + 1U;
+    pll3fracen = (RCC->PLL3FRACR & RCC_PLL3FRACR_FRACLE) >> 16U;
+    fracn1 = (float)(pll3fracen * ((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACV) >> 3U));
+    pll3vco = (float)((float)((RCC->PLL3CFGR1 & RCC_PLL3CFGR1_DIVN) + 1U) + (fracn1 / (float) 0x1FFF));
+
+    if (pll3m != 0U)
+    {
+      switch (pllsource)
+      {
+        case 0x00:  /* HSI used as PLL clock source */
+          pll3vco *= (float)((HSI_VALUE >> (RCC->HSICFGR & RCC_HSICFGR_HSIDIV)) / pll3m);
+          break;
+
+        case 0x01:  /* HSE used as PLL clock source */
+          pll3vco *= (float)(HSE_VALUE / pll3m);
+          break;
+
+        case 0x02:  /* CSI used as PLL clock source */
+          pll3vco *= (float)(CSI_VALUE / pll3m);
+          break;
+
+        case 0x03:  /* No clock source for PLL */
+          pll3vco = 0;
+          break;
+       }
+      SystemCoreClock = (uint32_t)(pll3vco/ ((float)((RCC->PLL3CFGR2 & RCC_PLL3CFGR2_DIVP) + 1U)));
+    }
+    else
+    {
+      SystemCoreClock = 0U;
+    }
+    break;
+  }
+
+  /* Compute mcu_ck */
+  SystemCoreClock = SystemCoreClock >> (RCC->MCUDIVR & RCC_MCUDIVR_MCUDIV);
+}
+
+
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32mp15xx.s before jump to main.
+  *         This function configures the external SRAM mounted on Eval boards
+  *         This SRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  
+}
+#endif /* DATA_IN_ExtSRAM */
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/templates/stm32mp1xx/board/Kconfig

+menu "Hardware Drivers Config"
+
+config SOC_STM32MP157A
+    bool
+    select SOC_SERIES_STM32MP1
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        select RT_USING_SERIAL
+        default y
+        if BSP_USING_UART
+		
+            config BSP_USING_UART4
+                bool "Enable UART4"
+                default y
+
+            config BSP_UART4_RX_USING_DMA
+                bool "Enable UART4 RX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART4_TX_USING_DMA
+                bool "Enable UART4 TX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+        endif
+
+    source "../libraries/HAL_Drivers/Kconfig"
+      
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+
+endmenu

bsp/stm32/libraries/templates/stm32mp1xx/board/SConscript

+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+CubeMX_Config/Common/System/system_stm32mp1xx.c
+CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+''')
+
+if GetDepend(['BSP_USING_ADC']):
+    src += Glob('ports/drv_hard_i2c.c')
+    src += Glob('ports/stpmic.c')
+
+if GetDepend(['BSP_USING_DAC']):
+    src += Glob('ports/drv_hard_i2c.c')
+    src += Glob('ports/stpmic.c')
+
+if GetDepend(['BSP_USING_WWDG']):
+    src += Glob('ports/drv_wwdg.c')
+
+if GetDepend(['BSP_USING_LPTIM']):
+    src += Glob('ports/drv_lptim.c')
+
+path =  [cwd]
+path += [cwd + '/CubeMX_Config/CM4/Inc']
+path += [cwd + '/ports']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/gcc/startup_stm32mp15xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/arm/startup_stm32mp15xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/iar/startup_stm32mp15xx.s']
+
+CPPDEFINES = ['CORE_CM4','NO_ATOMIC_64_SUPPORT','METAL_INTERNAL','METAL_MAX_DEVICE_REGIONS=2','VIRTIO_SLAVE_ONLY','STM32MP157Axx','__LOG_TRACE_IO_']
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/stm32/libraries/templates/stm32mp1xx/board/board.c

+/*
+* Copyright (c) 2006-2018, RT-Thread Development Team
+*
+* SPDX-License-Identifier: Apache-2.0
+*
+* Change Logs:
+* Date           Author       Notes
+* 2018-11-06     SummerGift   first version
+* 2019-04-09     WillianChan  add stm32f469-st-disco bsp
+* 2020-06-20     thread-liu   add stm32mp157-dk1 bsp
+*/
+
+#include "board.h"
+
+/**
+* @brief System Clock Configuration
+* @retval None
+*/
+void SystemClock_Config(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+    
+    /**Configure LSE Drive Capability
+    */
+    HAL_PWR_EnableBkUpAccess();
+    __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMHIGH);
+    
+    /**Initializes the CPU, AHB and APB busses clocks 
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
+        |RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIG;
+    RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
+    
+    /**PLL1 Config
+    */
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLL12SOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLM = 3;
+    RCC_OscInitStruct.PLL.PLLN = 81;
+    RCC_OscInitStruct.PLL.PLLP = 1;
+    RCC_OscInitStruct.PLL.PLLQ = 1;
+    RCC_OscInitStruct.PLL.PLLR = 1;
+    RCC_OscInitStruct.PLL.PLLFRACV = 0x800;
+    RCC_OscInitStruct.PLL.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL2 Config
+    */
+    RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL2.PLLSource = RCC_PLL12SOURCE_HSE;
+    RCC_OscInitStruct.PLL2.PLLM = 3;
+    RCC_OscInitStruct.PLL2.PLLN = 66;
+    RCC_OscInitStruct.PLL2.PLLP = 2;
+    RCC_OscInitStruct.PLL2.PLLQ = 1;
+    RCC_OscInitStruct.PLL2.PLLR = 1;
+    RCC_OscInitStruct.PLL2.PLLFRACV = 0x1400;
+    RCC_OscInitStruct.PLL2.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL2.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL2.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL3 Config
+    */
+    RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL3.PLLSource = RCC_PLL3SOURCE_HSE;
+    RCC_OscInitStruct.PLL3.PLLM = 2;
+    RCC_OscInitStruct.PLL3.PLLN = 34;
+    RCC_OscInitStruct.PLL3.PLLP = 2;
+    RCC_OscInitStruct.PLL3.PLLQ = 17;
+    RCC_OscInitStruct.PLL3.PLLR = 37;
+    RCC_OscInitStruct.PLL3.PLLRGE = RCC_PLL3IFRANGE_1;
+    RCC_OscInitStruct.PLL3.PLLFRACV = 0x1A04;
+    RCC_OscInitStruct.PLL3.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL3.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL3.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL4 Config
+    */
+    RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL4.PLLSource = RCC_PLL4SOURCE_HSE;
+    RCC_OscInitStruct.PLL4.PLLM = 4;
+    RCC_OscInitStruct.PLL4.PLLN = 99;
+    RCC_OscInitStruct.PLL4.PLLP = 6;
+    RCC_OscInitStruct.PLL4.PLLQ = 8;
+    RCC_OscInitStruct.PLL4.PLLR = 8;
+    RCC_OscInitStruct.PLL4.PLLRGE = RCC_PLL4IFRANGE_0;
+    RCC_OscInitStruct.PLL4.PLLFRACV = 0;
+    RCC_OscInitStruct.PLL4.PLLMODE = RCC_PLL_INTEGER;
+    RCC_OscInitStruct.PLL4.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL4.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /**RCC Clock Config
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
+        |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
+            |RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
+                |RCC_CLOCKTYPE_PCLK5|RCC_CLOCKTYPE_MPU;
+    RCC_ClkInitStruct.MPUInit.MPU_Clock = RCC_MPUSOURCE_PLL1;
+    RCC_ClkInitStruct.MPUInit.MPU_Div = RCC_MPU_DIV2;
+    RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_PLL2;
+    RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
+    RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_PLL3;
+    RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
+    RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV2;
+    RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV4;
+    RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV2;
+    RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV2;
+    RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV2;
+    
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    
+    /**Set the HSE division factor for RTC clock
+    */
+    __HAL_RCC_RTC_HSEDIV(24);
+}
+
+
+/**
+* @brief Peripherals Common Clock Configuration
+* @retval None
+*/
+void PeriphCommonClock_Config(void) {
+    RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+    
+    /** Initializes the common periph clock
+    */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CKPER;
+    PeriphClkInit.CkperClockSelection = RCC_CKPERCLKSOURCE_HSE;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+        Error_Handler();
+    }
+}
+
+extern void rt_hw_systick_init(void);
+extern int rt_hw_usart_init(void);
+void rt_hw_board_init() 
+{
+    /* HAL_Init() function is called at the beginning of the program */
+    HAL_Init();
+    
+    /* enable interrupt */
+    __set_PRIMASK(0);
+    /* Configure the system clock */
+    if (IS_ENGINEERING_BOOT_MODE()) {
+        /* Configure the system clock */
+        SystemClock_Config();
+    }
+    /* disable interrupt */
+    __set_PRIMASK(1);
+    
+    rt_hw_systick_init();
+    
+    /* Heap initialization */
+#if defined(RT_USING_HEAP)
+    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
+#endif
+    
+    /* Pin driver initialization is open by default */
+#ifdef RT_USING_PIN
+    rt_hw_pin_init();
+#endif
+    
+    /* USART driver initialization is open by default */
+#ifdef RT_USING_SERIAL
+    rt_hw_usart_init();
+#endif
+    
+    /* Set the shell console output device */
+#ifdef RT_USING_CONSOLE
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+    
+    /* Board underlying hardware initialization */
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}

bsp/stm32/libraries/templates/stm32mp1xx/project.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+