Hc32 pr (#6003)

* HC32F460 supported
Co-authored-by: NJamieTx <yangjp24@126.com>
Co-authored-by: NJamie <48308473+JamieTx@users.noreply.github.com>

bsp/hc32/README.md

@@ -7,6 +7,7 @@ HC32 系列 BSP 目前支持情况如下表所示：
 |:------------------------- |:------------------------- |
 | **F1 系列** |  |
 | **F4 系列** |  |
+| [ev_hc32f460_lqfp100_v2](ev_hc32f460_lqfp100_v2) | 小华 官方 EV_F460_LQ100_V2 开发板 |
 | [ev_hc32f4a0_lqfp176](ev_hc32f4a0_lqfp176) | 小华 官方 EV_F4A0_LQ176 开发板 |
 | **M1 系列** |  |
 | **M4 系列** |  |

bsp/hc32/ev_hc32f460_lqfp100_v2/.gitignore

+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h

bsp/hc32/ev_hc32f460_lqfp100_v2/Kconfig

+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+ 
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"

bsp/hc32/ev_hc32f460_lqfp100_v2/README.md

+# XHSC EV_F460_LQ100_V2 开发板 BSP 说明
+
+## 简介
+
+本文档为小华半导体为 EV_F460_LQ100_V2 开发板提供的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+EV_F460_LQ100_V2 是 XHSC 官方推出的开发板，搭载 HC32F460PETB 芯片，基于 ARM Cortex-M4 内核，最高主频 200 MHz，具有丰富的板载资源，可以充分发挥 HC32F460PETB 的芯片性能。
+
+开发板外观如下图所示：
+
+ ![board](figures/board.jpg)
+
+EV_F460_LQ100_V2 开发板常用 **板载资源** 如下：
+
+- MCU: HC32F460PETB，主频200MHz，512KB FLASH，192KB RAM
+- 常用外设
+  - LED: 4 个，User LED(LED0，LED1，LED2，LED3)。
+  - 按键: 11 个，矩阵键盘(K1~K9), WAKEUP(K10), RESET(K11)
+- 常用接口: USB转串口、SD卡接口、USB FS、3.5mm耳机接口、Line in接口、喇叭接口
+- 调试接口: 板载DAP调试器、标准JTAG/SWD
+
+开发板更多详细信息请参考小华半导体半导体[EV_F460_LQ100_V2](http://www.xhsc.com.cn)
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设**  | **支持情况** |               **备注**                |
+| :------------ | :-----------: | :-----------------------------------: |
+| USB 转串口    |      支持     |          使用 UART4                  |
+| LED           |     支持     |           LED                   |
+| **片上外设**  | **支持情况** |               **备注**                |
+| :------------ | :-----------: | :-----------------------------------: |
+| GPIO          |     支持     | PA0, PA1... PH2 ---> PIN: 0, 1...82 |
+| UART          |     支持     |              UART1~4                 |
+
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用Type-A to MircoUSB线连接开发板和PC供电。
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用板载 DAP 下载程序，点击下载按钮即可下载程序到开发板。
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，观察开发板上LED的运行效果，绿色LED1会周期性闪烁。
+
+USB虚拟COM端口默认连接串口4，在终端工具里打开相应的串口，复位设备后，可以看到 RT-Thread 的输出信息:
+
+```
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.1.1 build May 25 2022 08:55:55
+ 2006 - 2022 Copyright by RT-Thread team
+msh >
+```
+
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口 4 的功能，更多高级功能需要利用 env 工具对 BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=mdk5/iar` 命令重新生成工程。
+
+## 注意事项
+
+## 联系人信息
+
+维护人:
+
+-  [小华半导体MCU](http://www.xhsc.com.cn)，邮箱：<mcu_eco@xhsc.com.cn>
\ No newline at end of file

bsp/hc32/ev_hc32f460_lqfp100_v2/SConscript

+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/hc32/ev_hc32f460_lqfp100_v2/SConstruct

+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rtthread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+hc32_library = 'hc32f460_ddl'
+rtconfig.BSP_LIBRARY_TYPE = hc32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, hc32_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'hc32_drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/hc32/ev_hc32f460_lqfp100_v2/applications/SConscript

+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'applications')
+src	= Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/hc32/ev_hc32f460_lqfp100_v2/applications/main.c

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+
+/* defined the LED_GREEN pin: PD4 */
+#define LED_GREEN_PIN GET_PIN(D, 4)
+
+
+int main(void)
+{
+    /* set LED_GREEN_PIN pin mode to output */
+    rt_pin_mode(LED_GREEN_PIN, PIN_MODE_OUTPUT);
+
+    while (1)
+    {
+        rt_pin_write(LED_GREEN_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);
+        rt_pin_write(LED_GREEN_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+}
+

bsp/hc32/ev_hc32f460_lqfp100_v2/board/Kconfig

+menu "Hardware Drivers Config"
+
+config SOC_HC32F460PE
+    bool 
+    select SOC_SERIES_HC32F4
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default n
+
+            config BSP_UART2_RX_USING_DMA
+                bool "Enable UART2 RX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART2_TX_USING_DMA
+                bool "Enable UART2 TX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+            
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default n
+
+            config BSP_UART3_RX_USING_DMA
+                bool "Enable UART3 RX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART3_TX_USING_DMA
+                bool "Enable UART3 TX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_USING_UART4
+                bool "Enable UART4"
+                default n
+            
+            config BSP_UART4_RX_USING_DMA
+                bool "Enable UART4 RX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART4_TX_USING_DMA
+                bool "Enable UART4 TX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+ 
+endmenu

bsp/hc32/ev_hc32f460_lqfp100_v2/board/SConscript

+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+board_config.c
+''')
+
+path =  [cwd]
+path += [cwd + '/ports']
+path += [cwd + '/config']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/hc32f460_ddl/drivers/cmsis/Device/HDSC/hc32f4xx/Source/GCC/startup_hc32f460.S']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/hc32f460_ddl/drivers/cmsis/Device/HDSC/hc32f4xx/Source/ARM/startup_hc32f460.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/hc32f460_ddl/drivers/cmsis/Device/HDSC/hc32f4xx/Source/IAR/startup_hc32f460.s']
+
+CPPDEFINES = ['HC32F460']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/hc32/ev_hc32f460_lqfp100_v2/board/board.c

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#include "board.h"
+
+/* unlock/lock peripheral */
+#define EXAMPLE_PERIPH_WE               (LL_PERIPH_GPIO | LL_PERIPH_EFM | LL_PERIPH_FCG | \
+                                         LL_PERIPH_PWC_CLK_RMU | LL_PERIPH_SRAM)
+#define EXAMPLE_PERIPH_WP               (LL_PERIPH_EFM | LL_PERIPH_FCG | LL_PERIPH_SRAM)
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @param  None
+  * @retval None
+  */
+void Error_Handler(void)
+{
+    /* USER CODE BEGIN Error_Handler */
+    /* User can add his own implementation to report the HAL error return state */
+    while (1)
+    {
+    }
+    /* USER CODE END Error_Handler */
+}
+
+/** System Clock Configuration
+*/
+void SystemClock_Config(void)
+{
+    stc_clock_xtal_init_t     stcXtalInit;
+    stc_clock_pll_init_t      stcMpllInit;
+
+    (void)CLK_XtalStructInit(&stcXtalInit);
+    (void)CLK_PLLStructInit(&stcMpllInit);
+
+    /* Set bus clk div. */
+    CLK_SetClockDiv(CLK_BUS_CLK_ALL, (CLK_HCLK_DIV1 | CLK_EXCLK_DIV2 | CLK_PCLK0_DIV1 | CLK_PCLK1_DIV2 | \
+                                      CLK_PCLK2_DIV4 | CLK_PCLK3_DIV4 | CLK_PCLK4_DIV2));
+
+    /* Config Xtal and enable Xtal */
+    stcXtalInit.u8Mode = CLK_XTAL_MD_OSC;
+    stcXtalInit.u8Drv = CLK_XTAL_DRV_ULOW;
+    stcXtalInit.u8State = CLK_XTAL_ON;
+    stcXtalInit.u8StableTime = CLK_XTAL_STB_2MS;
+    (void)CLK_XtalInit(&stcXtalInit);
+
+    /* MPLL config (XTAL / pllmDiv * plln / PllpDiv = 200M). */
+    stcMpllInit.PLLCFGR = 0UL;
+    stcMpllInit.PLLCFGR_f.PLLM = 1UL - 1UL;
+    stcMpllInit.PLLCFGR_f.PLLN = 50UL - 1UL;
+    stcMpllInit.PLLCFGR_f.PLLP = 2UL - 1UL;
+    stcMpllInit.PLLCFGR_f.PLLQ = 2UL - 1UL;
+    stcMpllInit.PLLCFGR_f.PLLR = 2UL - 1UL;
+    stcMpllInit.u8PLLState = CLK_PLL_ON;
+    stcMpllInit.PLLCFGR_f.PLLSRC = CLK_PLL_SRC_XTAL;
+    (void)CLK_PLLInit(&stcMpllInit);
+    /* Wait MPLL ready. */
+    while (SET != CLK_GetStableStatus(CLK_STB_FLAG_PLL))
+    {
+        ;
+    }
+
+    /* sram init include read/write wait cycle setting */
+    SRAM_SetWaitCycle(SRAM_SRAMH, SRAM_WAIT_CYCLE0, SRAM_WAIT_CYCLE0);
+    SRAM_SetWaitCycle((SRAM_SRAM12 | SRAM_SRAM3 | SRAM_SRAMR), SRAM_WAIT_CYCLE1, SRAM_WAIT_CYCLE1);
+
+    /* flash read wait cycle setting */
+    (void)EFM_SetWaitCycle(EFM_WAIT_CYCLE5);
+    /* 3 cycles for 126MHz ~ 200MHz */
+    GPIO_SetReadWaitCycle(GPIO_RD_WAIT3);
+    /* Switch driver ability */
+    (void)PWC_HighSpeedToHighPerformance();
+    /* Switch system clock source to MPLL. */
+    CLK_SetSysClockSrc(CLK_SYSCLK_SRC_PLL);
+}
+
+/** Peripheral Clock Configuration
+*/
+static void PeripheralClock_Config(void)
+{
+#if defined(HC32F460)
+#if defined(BSP_USING_CAN1)
+    CLK_SetCANClockSrc(CLK_CAN1, CLK_CANCLK_SYSCLK_DIV6);
+#endif
+
+#if defined(RT_USING_ADC)
+    CLK_SetPeriClockSrc(CLK_PERIPHCLK_PCLK);
+#endif
+#endif
+}
+
+/*******************************************************************************
+ * Function Name  : SysTick_Configuration
+ * Description    : Configures the SysTick for OS tick.
+ * Input          : None
+ * Output         : None
+ * Return         : None
+ *******************************************************************************/
+void  SysTick_Configuration(void)
+{
+    stc_clock_freq_t stcClkFreq;
+    rt_uint32_t cnts;
+
+    CLK_GetClockFreq(&stcClkFreq);
+
+    cnts = (rt_uint32_t)stcClkFreq.u32HclkFreq / RT_TICK_PER_SECOND;
+
+    SysTick_Config(cnts);
+}
+
+/**
+ * This is the timer interrupt service routine.
+ *
+ */
+void SysTick_Handler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_tick_increase();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+/**
+ * This function will initial HC32 board.
+ */
+void rt_hw_board_init()
+{
+    /* Peripheral registers write unprotected */
+    LL_PERIPH_WE(EXAMPLE_PERIPH_WE);
+
+    SystemClock_Config();
+    PeripheralClock_Config();
+    /* Configure the SysTick */
+    SysTick_Configuration();
+
+    /* Heap initialization */
+#if defined(RT_USING_HEAP)
+    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
+#endif
+
+    /* Board underlying hardware initialization */
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+
+#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+}
+
+void rt_hw_us_delay(rt_uint32_t us)
+{
+    uint32_t start, now, delta, reload, us_tick;
+    start = SysTick->VAL;
+    reload = SysTick->LOAD;
+    us_tick = SystemCoreClock / 1000000UL;
+
+    do
+    {
+        now = SysTick->VAL;
+        delta = start > now ?  start - now : reload + start - now;
+    }
+    while (delta < us_tick * us);
+}
+
+/*@}*/

bsp/hc32/ev_hc32f460_lqfp100_v2/board/board.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include "hc32_ll.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define HC32_SRAM_SIZE                  (188)
+#define HC32_SRAM_END                   (0x1FFF8000 + HC32_SRAM_SIZE * 1024)
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN                      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="HEAP"
+#define HEAP_BEGIN                      (__segment_end("HEAP"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN                      (&__bss_end)
+#endif
+
+#define HEAP_END                        HC32_SRAM_END
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

bsp/hc32/ev_hc32f460_lqfp100_v2/board/board_config.c

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#include <rtdevice.h>
+#include "board_config.h"
+
+/**
+ * The below functions will initialize HC32 board.
+ */
+
+#if defined RT_USING_SERIAL
+rt_err_t rt_hw_board_uart_init(CM_USART_TypeDef *USARTx)
+{
+    rt_err_t result = RT_EOK;
+
+    switch ((rt_uint32_t)USARTx)
+    {
+#if defined(BSP_USING_UART4)
+    case (rt_uint32_t)CM_USART4:
+        /* Configure USART RX/TX pin. */
+        GPIO_SetFunc(USART4_RX_PORT, USART4_RX_PIN, GPIO_FUNC_37);
+        GPIO_SetFunc(USART4_TX_PORT, USART4_TX_PIN, GPIO_FUNC_36);
+        break;
+#endif
+    default:
+        result = -RT_ERROR;
+        break;
+    }
+
+    return result;
+}
+#endif
+

bsp/hc32/ev_hc32f460_lqfp100_v2/board/board_config.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+
+#ifndef __BOARD_CONFIG_H__
+#define __BOARD_CONFIG_H__
+
+#include <rtconfig.h>
+#include "hc32_ll.h"
+#include "drv_config.h"
+
+
+/************************ USART port **********************/
+#if defined(BSP_USING_UART1)
+    #define USART1_RX_PORT                  (GPIO_PORT_C)
+    #define USART1_RX_PIN                   (GPIO_PIN_04)
+
+    #define USART1_TX_PORT                  (GPIO_PORT_A)
+    #define USART1_TX_PIN                   (GPIO_PIN_07)
+#endif
+
+#if defined(BSP_USING_UART2)
+    #define USART2_RX_PORT                  (GPIO_PORT_A)
+    #define USART2_RX_PIN                   (GPIO_PIN_04)
+
+    #define USART2_TX_PORT                  (GPIO_PORT_A)
+    #define USART2_TX_PIN                   (GPIO_PIN_02)
+#endif
+
+#if defined(BSP_USING_UART3)
+    #define USART3_RX_PORT                  (GPIO_PORT_C)
+    #define USART3_RX_PIN                   (GPIO_PIN_13)
+
+    #define USART3_TX_PORT                  (GPIO_PORT_H)
+    #define USART3_TX_PIN                   (GPIO_PIN_02)
+#endif
+
+#if defined(BSP_USING_UART4)
+    #define USART4_RX_PORT                  (GPIO_PORT_B)
+    #define USART4_RX_PIN                   (GPIO_PIN_09)
+
+    #define USART4_TX_PORT                  (GPIO_PORT_E)
+    #define USART4_TX_PIN                   (GPIO_PIN_06)
+#endif
+
+#endif

bsp/hc32/ev_hc32f460_lqfp100_v2/board/config/dma_config.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+#include "irq_config.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 ch0 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_RX_DMA_INSTANCE            CM_DMA1
+#define SPI1_RX_DMA_CHANNEL             DMA_CH0
+#define SPI1_RX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI1_RX_DMA_TRIG_SELECT         AOS_DMA1_0
+#define SPI1_RX_DMA_IRQn                BSP_DMA1_CH0_IRQ_NUM
+#define SPI1_RX_DMA_INT_PRIO            BSP_DMA1_CH0_IRQ_PRIO
+#define SPI1_RX_DMA_INT_SRC             INT_SRC_DMA1_TC0
+#endif
+
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_RX_DMA_INSTANCE            CM_DMA1
+#define SPI3_RX_DMA_CHANNEL             DMA_CH0
+#define SPI3_RX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI3_RX_DMA_TRIG_SELECT         AOS_DMA1_0
+#define SPI3_RX_DMA_IRQn                BSP_DMA1_CH0_IRQ_NUM
+#define SPI3_RX_DMA_INT_PRIO            BSP_DMA1_CH0_IRQ_PRIO
+#define SPI3_RX_DMA_INT_SRC             INT_SRC_DMA1_TC0
+#endif
+
+/* DMA1 ch1 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_TX_DMA_INSTANCE            CM_DMA1
+#define SPI1_TX_DMA_CHANNEL             DMA_CH1
+#define SPI1_TX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI1_TX_DMA_TRIG_SELECT         AOS_DMA1_1
+#define SPI1_TX_DMA_IRQn                BSP_DMA1_CH1_IRQ_NUM
+#define SPI1_TX_DMA_INT_PRIO            BSP_DMA1_CH1_IRQ_PRIO
+#define SPI1_TX_DMA_INT_SRC             INT_SRC_DMA1_TC1
+#endif
+
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_TX_DMA_INSTANCE            CM_DMA1
+#define SPI3_TX_DMA_CHANNEL             DMA_CH1
+#define SPI3_TX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI3_TX_DMA_TRIG_SELECT         AOS_DMA1_1
+#define SPI3_TX_DMA_IRQn                BSP_DMA1_CH1_IRQ_NUM
+#define SPI3_TX_DMA_INT_PRIO            BSP_DMA1_CH1_IRQ_PRIO
+#define SPI3_TX_DMA_INT_SRC             INT_SRC_DMA1_TC1
+#endif
+
+/* DMA1 ch2 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_RX_DMA_INSTANCE            CM_DMA1
+#define SPI2_RX_DMA_CHANNEL             DMA_CH2
+#define SPI2_RX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI2_RX_DMA_TRIG_SELECT         AOS_DMA1_2
+#define SPI2_RX_DMA_IRQn                BSP_DMA1_CH2_IRQ_NUM
+#define SPI2_RX_DMA_INT_PRIO            BSP_DMA1_CH2_IRQ_PRIO
+#define SPI2_RX_DMA_INT_SRC             INT_SRC_DMA1_TC2
+#endif
+
+/* DMA1 ch3 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_TX_DMA_INSTANCE            CM_DMA1
+#define SPI2_TX_DMA_CHANNEL             DMA_CH3
+#define SPI2_TX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI2_TX_DMA_TRIG_SELECT         AOS_DMA1_3
+#define SPI2_TX_DMA_IRQn                BSP_DMA1_CH3_IRQ_NUM
+#define SPI2_TX_DMA_INT_PRIO            BSP_DMA1_CH3_IRQ_PRIO
+#define SPI2_TX_DMA_INT_SRC             INT_SRC_DMA1_TC3
+#endif
+
+#if defined(BSP_SPI4_RX_USING_DMA) && !defined(SPI4_RX_DMA_INSTANCE)
+#define SPI4_RX_DMA_INSTANCE            CM_DMA1
+#define SPI4_RX_DMA_CHANNEL             DMA_CH2
+#define SPI4_RX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI4_RX_DMA_TRIG_SELECT         AOS_DMA1_2
+#define SPI4_RX_DMA_IRQn                BSP_DMA1_CH2_IRQ_NUM
+#define SPI4_RX_DMA_INT_PRIO            BSP_DMA1_CH2_IRQ_PRIO
+#define SPI4_RX_DMA_INT_SRC             INT_SRC_DMA1_TC2
+#endif
+
+#if defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_TX_DMA_INSTANCE            CM_DMA1
+#define SPI4_TX_DMA_CHANNEL             DMA_CH3
+#define SPI4_TX_DMA_CLOCK               (PWC_FCG0_DMA1 | PWC_FCG0_AOS)
+#define SPI4_TX_DMA_TRIG_SELECT         AOS_DMA1_3
+#define SPI4_TX_DMA_IRQn                BSP_DMA1_CH3_IRQ_NUM
+#define SPI4_TX_DMA_INT_PRIO            BSP_DMA1_CH3_IRQ_PRIO
+#define SPI4_TX_DMA_INT_SRC             INT_SRC_DMA1_TC3
+#endif
+
+/* DMA2 ch0 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_RX_DMA_INSTANCE           CM_DMA2
+#define UART1_RX_DMA_CHANNEL            DMA_CH0
+#define UART1_RX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART1_RX_DMA_TRIG_SELECT        AOS_DMA2_0
+#define UART1_RX_DMA_IRQn               BSP_DMA2_CH0_IRQ_NUM
+#define UART1_RX_DMA_INT_PRIO           BSP_DMA2_CH0_IRQ_PRIO
+#define UART1_RX_DMA_INT_SRC            INT_SRC_DMA2_TC0
+#endif
+
+#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_RX_DMA_INSTANCE           CM_DMA2
+#define UART3_RX_DMA_CHANNEL            DMA_CH0
+#define UART3_RX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART3_RX_DMA_TRIG_SELECT        AOS_DMA2_0
+#define UART3_RX_DMA_IRQn               BSP_DMA2_CH0_IRQ_NUM
+#define UART3_RX_DMA_INT_PRIO           BSP_DMA2_CH0_IRQ_PRIO
+#define UART3_RX_DMA_INT_SRC            INT_SRC_DMA2_TC0
+#endif
+
+/* DMA2 ch1 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_TX_DMA_INSTANCE           CM_DMA2
+#define UART1_TX_DMA_CHANNEL            DMA_CH1
+#define UART1_TX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART1_TX_DMA_TRIG_SELECT        AOS_DMA2_1
+#define UART1_TX_DMA_IRQn               BSP_DMA2_CH1_IRQ_NUM
+#define UART1_TX_DMA_INT_PRIO           BSP_DMA2_CH1_IRQ_PRIO
+#define UART1_TX_DMA_INT_SRC            INT_SRC_DMA2_TC1
+#endif
+
+#if defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_TX_DMA_INSTANCE           CM_DMA2
+#define UART3_TX_DMA_CHANNEL            DMA_CH1
+#define UART3_TX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART3_TX_DMA_TRIG_SELECT        AOS_DMA2_1
+#define UART3_TX_DMA_IRQn               BSP_DMA2_CH1_IRQ_NUM
+#define UART3_TX_DMA_INT_PRIO           BSP_DMA2_CH1_IRQ_PRIO
+#define UART3_TX_DMA_INT_SRC            INT_SRC_DMA2_TC1
+#endif
+
+/* DMA2 ch2 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_RX_DMA_INSTANCE           CM_DMA2
+#define UART2_RX_DMA_CHANNEL            DMA_CH2
+#define UART2_RX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART2_RX_DMA_TRIG_SELECT        AOS_DMA2_2
+#define UART2_RX_DMA_IRQn               BSP_DMA2_CH2_IRQ_NUM
+#define UART2_RX_DMA_INT_PRIO           BSP_DMA2_CH2_IRQ_PRIO
+#define UART2_RX_DMA_INT_SRC            INT_SRC_DMA2_TC2
+#endif
+
+#if defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_RX_DMA_INSTANCE           CM_DMA2
+#define UART4_RX_DMA_CHANNEL            DMA_CH2
+#define UART4_RX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART4_RX_DMA_TRIG_SELECT        AOS_DMA2_2
+#define UART4_RX_DMA_IRQn               BSP_DMA2_CH2_IRQ_NUM
+#define UART4_RX_DMA_INT_PRIO           BSP_DMA2_CH2_IRQ_PRIO
+#define UART4_RX_DMA_INT_SRC            INT_SRC_DMA2_TC2
+#endif
+
+/* DMA2 ch3 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_TX_DMA_INSTANCE           CM_DMA2
+#define UART2_TX_DMA_CHANNEL            DMA_CH3
+#define UART2_TX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART2_TX_DMA_TRIG_SELECT        AOS_DMA2_3
+#define UART2_TX_DMA_IRQn               BSP_DMA2_CH3_IRQ_NUM
+#define UART2_TX_DMA_INT_PRIO           BSP_DMA2_CH3_IRQ_PRIO
+#define UART2_TX_DMA_INT_SRC            INT_SRC_DMA2_TC3
+#endif
+
+#if defined(BSP_UART4_TX_USING_DMA) && !defined(UART4_TX_DMA_INSTANCE)
+#define UART4_TX_DMA_INSTANCE           CM_DMA2
+#define UART4_TX_DMA_CHANNEL            DMA_CH3
+#define UART4_TX_DMA_CLOCK              (PWC_FCG0_DMA2 | PWC_FCG0_AOS)
+#define UART4_TX_DMA_TRIG_SELECT        AOS_DMA2_3
+#define UART4_TX_DMA_IRQn               BSP_DMA2_CH3_IRQ_NUM
+#define UART4_TX_DMA_INT_PRIO           BSP_DMA2_CH3_IRQ_PRIO
+#define UART4_TX_DMA_INT_SRC            INT_SRC_DMA2_TC3
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __DMA_CONFIG_H__ */

bsp/hc32/ev_hc32f460_lqfp100_v2/board/config/gpio_config.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#ifndef __GPIO_CONFIG_H__
+#define __GPIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "irq_config.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined(RT_USING_PIN)
+
+#ifndef EXTINT0_IRQ_CONFIG
+#define EXTINT0_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT0_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT0_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ0,                   \
+    }
+#endif /* EXTINT1_IRQ_CONFIG */
+
+#ifndef EXTINT1_IRQ_CONFIG
+#define EXTINT1_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT1_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT1_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ1,                   \
+    }
+#endif /* EXTINT1_IRQ_CONFIG */
+
+#ifndef EXTINT2_IRQ_CONFIG
+#define EXTINT2_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT2_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT2_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ2,                   \
+    }
+#endif /* EXTINT2_IRQ_CONFIG */
+
+#ifndef EXTINT3_IRQ_CONFIG
+#define EXTINT3_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT3_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT3_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ3,                   \
+    }
+#endif /* EXTINT3_IRQ_CONFIG */
+
+#ifndef EXTINT4_IRQ_CONFIG
+#define EXTINT4_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT4_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT4_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ4,                   \
+    }
+#endif /* EXTINT4_IRQ_CONFIG */
+
+#ifndef EXTINT5_IRQ_CONFIG
+#define EXTINT5_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT5_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT5_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ5,                   \
+    }
+#endif /* EXTINT5_IRQ_CONFIG */
+
+#ifndef EXTINT6_IRQ_CONFIG
+#define EXTINT6_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT6_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT6_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ6,                   \
+    }
+#endif /* EXTINT6_IRQ_CONFIG */
+
+#ifndef EXTINT7_IRQ_CONFIG
+#define EXTINT7_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT7_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT7_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ7,                   \
+    }
+#endif /* EXTINT7_IRQ_CONFIG */
+
+#ifndef EXTINT8_IRQ_CONFIG
+#define EXTINT8_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT8_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT8_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ8,                   \
+    }
+#endif /* EXTINT8_IRQ_CONFIG */
+
+#ifndef EXTINT9_IRQ_CONFIG
+#define EXTINT9_IRQ_CONFIG                                  \
+    {                                                       \
+        .irq_num    = BSP_EXTINT9_IRQ_NUM,                  \
+        .irq_prio   = BSP_EXTINT9_IRQ_PRIO,                 \
+        .int_src    = INT_SRC_PORT_EIRQ9,                   \
+    }
+#endif /* EXTINT9_IRQ_CONFIG */
+
+#ifndef EXTINT10_IRQ_CONFIG
+#define EXTINT10_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT10_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT10_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ10,                  \
+    }
+#endif /* EXTINT10_IRQ_CONFIG */
+
+#ifndef EXTINT11_IRQ_CONFIG
+#define EXTINT11_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT11_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT11_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ11,                  \
+    }
+#endif /* EXTINT11_IRQ_CONFIG */
+
+#ifndef EXTINT12_IRQ_CONFIG
+#define EXTINT12_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT12_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT12_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ12,                  \
+    }
+#endif /* EXTINT12_IRQ_CONFIG */
+
+#ifndef EXTINT13_IRQ_CONFIG
+#define EXTINT13_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT13_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT13_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ13,                  \
+    }
+#endif /* EXTINT13_IRQ_CONFIG */
+
+#ifndef EXTINT14_IRQ_CONFIG
+#define EXTINT14_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT14_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT14_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ14,                  \
+    }
+#endif /* EXTINT14_IRQ_CONFIG */
+
+#ifndef EXTINT15_IRQ_CONFIG
+#define EXTINT15_IRQ_CONFIG                                 \
+    {                                                       \
+        .irq_num    = BSP_EXTINT15_IRQ_NUM,                 \
+        .irq_prio   = BSP_EXTINT15_IRQ_PRIO,                \
+        .int_src    = INT_SRC_PORT_EIRQ15,                  \
+    }
+#endif /* EXTINT15_IRQ_CONFIG */
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __GPIO_CONFIG_H__ */

bsp/hc32/ev_hc32f460_lqfp100_v2/board/config/irq_config.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#ifndef __IRQ_CONFIG_H__
+#define __IRQ_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define BSP_EXTINT0_IRQ_NUM             INT022_IRQn
+#define BSP_EXTINT0_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT1_IRQ_NUM             INT023_IRQn
+#define BSP_EXTINT1_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT2_IRQ_NUM             INT024_IRQn
+#define BSP_EXTINT2_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT3_IRQ_NUM             INT025_IRQn
+#define BSP_EXTINT3_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT4_IRQ_NUM             INT026_IRQn
+#define BSP_EXTINT4_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT5_IRQ_NUM             INT027_IRQn
+#define BSP_EXTINT5_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT6_IRQ_NUM             INT028_IRQn
+#define BSP_EXTINT6_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT7_IRQ_NUM             INT029_IRQn
+#define BSP_EXTINT7_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT8_IRQ_NUM             INT030_IRQn
+#define BSP_EXTINT8_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT9_IRQ_NUM             INT031_IRQn
+#define BSP_EXTINT9_IRQ_PRIO            DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT10_IRQ_NUM            INT032_IRQn
+#define BSP_EXTINT10_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT11_IRQ_NUM            INT033_IRQn
+#define BSP_EXTINT11_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT12_IRQ_NUM            INT034_IRQn
+#define BSP_EXTINT12_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT13_IRQ_NUM            INT035_IRQn
+#define BSP_EXTINT13_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT14_IRQ_NUM            INT036_IRQn
+#define BSP_EXTINT14_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_EXTINT15_IRQ_NUM            INT037_IRQn
+#define BSP_EXTINT15_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+/* DMA1 ch0 */
+#define BSP_DMA1_CH0_IRQ_NUM            INT038_IRQn
+#define BSP_DMA1_CH0_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA1 ch1 */
+#define BSP_DMA1_CH1_IRQ_NUM            INT039_IRQn
+#define BSP_DMA1_CH1_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA1 ch2 */
+#define BSP_DMA1_CH2_IRQ_NUM            INT040_IRQn
+#define BSP_DMA1_CH2_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA1 ch3 */
+#define BSP_DMA1_CH3_IRQ_NUM            INT041_IRQn
+#define BSP_DMA1_CH3_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+/* DMA2 ch0 */
+#define BSP_DMA2_CH0_IRQ_NUM            INT042_IRQn
+#define BSP_DMA2_CH0_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA2 ch1 */
+#define BSP_DMA2_CH1_IRQ_NUM            INT043_IRQn
+#define BSP_DMA2_CH1_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA2 ch2 */
+#define BSP_DMA2_CH2_IRQ_NUM            INT008_IRQn
+#define BSP_DMA2_CH2_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+/* DMA2 ch3 */
+#define BSP_DMA2_CH3_IRQ_NUM            INT009_IRQn
+#define BSP_DMA2_CH3_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+
+#if defined(BSP_USING_UART1)
+#define BSP_UART1_RXERR_IRQ_NUM         INT010_IRQn
+#define BSP_UART1_RXERR_IRQ_PRIO        DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART1_RX_IRQ_NUM            INT083_IRQn
+#define BSP_UART1_RX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART1_TX_IRQ_NUM            INT082_IRQn
+#define BSP_UART1_TX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#define BSP_UART1_RXTO_IRQ_NUM          INT006_IRQn
+#define BSP_UART1_RXTO_IRQ_PRIO         DDL_IRQ_PRIO_DEFAULT
+#endif
+#if defined(BSP_UART1_TX_USING_DMA)
+#define BSP_UART1_TX_CPLT_IRQ_NUM       INT080_IRQn
+#define BSP_UART1_TX_CPLT_IRQ_PRIO      DDL_IRQ_PRIO_DEFAULT
+#endif
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#define BSP_UART2_RXERR_IRQ_NUM         INT011_IRQn
+#define BSP_UART2_RXERR_IRQ_PRIO        DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART2_RX_IRQ_NUM            INT085_IRQn
+#define BSP_UART2_RX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART2_TX_IRQ_NUM            INT084_IRQn
+#define BSP_UART2_TX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#define BSP_UART2_RXTO_IRQ_NUM          INT007_IRQn
+#define BSP_UART2_RXTO_IRQ_PRIO         DDL_IRQ_PRIO_DEFAULT
+#endif
+#if defined(BSP_UART2_TX_USING_DMA)
+#define BSP_UART2_TX_CPLT_IRQ_NUM       INT081_IRQn
+#define BSP_UART2_TX_CPLT_IRQ_PRIO      DDL_IRQ_PRIO_DEFAULT
+#endif
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#define BSP_UART3_RXERR_IRQ_NUM         INT012_IRQn
+#define BSP_UART3_RXERR_IRQ_PRIO        DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART3_RX_IRQ_NUM            INT089_IRQn
+#define BSP_UART3_RX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART3_TX_IRQ_NUM            INT088_IRQn
+#define BSP_UART3_TX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#define BSP_UART3_RXTO_IRQ_NUM          INT014_IRQn
+#define BSP_UART3_RXTO_IRQ_PRIO         DDL_IRQ_PRIO_DEFAULT
+#endif
+#if defined(BSP_UART3_TX_USING_DMA)
+#define BSP_UART3_TX_CPLT_IRQ_NUM       INT086_IRQn
+#define BSP_UART3_TX_CPLT_IRQ_PRIO      DDL_IRQ_PRIO_DEFAULT
+#endif
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#define BSP_UART4_RXERR_IRQ_NUM         INT013_IRQn
+#define BSP_UART4_RXERR_IRQ_PRIO        DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART4_RX_IRQ_NUM            INT091_IRQn
+#define BSP_UART4_RX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+#define BSP_UART4_TX_IRQ_NUM            INT090_IRQn
+#define BSP_UART4_TX_IRQ_PRIO           DDL_IRQ_PRIO_DEFAULT
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#define BSP_UART4_RXTO_IRQ_NUM          INT015_IRQn
+#define BSP_UART4_RXTO_IRQ_PRIO         DDL_IRQ_PRIO_DEFAULT
+#endif
+#if defined(BSP_UART4_TX_USING_DMA)
+#define BSP_UART4_TX_CPLT_IRQ_NUM       INT087_IRQn
+#define BSP_UART4_TX_CPLT_IRQ_PRIO      DDL_IRQ_PRIO_DEFAULT
+#endif
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_CAN1)
+#define BSP_CAN1_IRQ_NUM                INT004_IRQn
+#define BSP_CAN1_IRQ_PRIO               DDL_IRQ_PRIO_DEFAULT
+#endif/* BSP_USING_CAN1 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __IRQ_CONFIG_H__ */

bsp/hc32/ev_hc32f460_lqfp100_v2/board/drv_config.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-28     CDT          first version
+ */
+
+#ifndef __DRV_CONFIG_H__
+#define __DRV_CONFIG_H__
+
+#include <board.h>
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "dma_config.h"
+#include "uart_config.h"
+#include "gpio_config.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

bsp/hc32/ev_hc32f460_lqfp100_v2/board/hc32f4xx_conf.h

+/**
+ *******************************************************************************
+ * @file  template/source/hc32f4xx_conf.h
+ * @brief This file contains HC32 Series Device Driver Library usage management.
+ @verbatim
+   Change Logs:
+   Date             Author          Notes
+   2022-04-28       CDT             First version
+ @endverbatim
+ *******************************************************************************
+ * Copyright (C) 2022, Xiaohua Semiconductor Co., Ltd. All rights reserved.
+ *
+ * This software component is licensed by XHSC under BSD 3-Clause license
+ * (the "License"); You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                    opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#ifndef __HC32F4XX_CONF_H__
+#define __HC32F4XX_CONF_H__
+
+/*******************************************************************************
+ * Include files
+ ******************************************************************************/
+
+/* C binding of definitions if building with C++ compiler */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+ * Global type definitions ('typedef')
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Global pre-processor symbols/macros ('#define')
+ ******************************************************************************/
+
+/**
+ * @brief This is the list of modules to be used in the Device Driver Library.
+ * Select the modules you need to use to DDL_ON.
+ * @note LL_ICG_ENABLE must be turned on(DDL_ON) to ensure that the chip works
+ * properly.
+ * @note LL_UTILITY_ENABLE must be turned on(DDL_ON) if using Device Driver
+ * Library.
+ * @note LL_PRINT_ENABLE must be turned on(DDL_ON) if using printf function.
+ */
+#define LL_ICG_ENABLE                               (DDL_ON)
+#define LL_UTILITY_ENABLE                           (DDL_ON)
+#define LL_PRINT_ENABLE                             (DDL_OFF)
+
+#define LL_ADC_ENABLE                               (DDL_ON)
+#define LL_AES_ENABLE                               (DDL_ON)
+#define LL_AOS_ENABLE                               (DDL_ON)
+#define LL_CAN_ENABLE                               (DDL_ON)
+#define LL_CLK_ENABLE                               (DDL_ON)
+#define LL_CMP_ENABLE                               (DDL_ON)
+#define LL_CRC_ENABLE                               (DDL_ON)
+#define LL_CTC_ENABLE                               (DDL_ON)
+#define LL_DAC_ENABLE                               (DDL_ON)
+#define LL_DCU_ENABLE                               (DDL_ON)
+#define LL_DMA_ENABLE                               (DDL_ON)
+#define LL_DMC_ENABLE                               (DDL_ON)
+#define LL_DVP_ENABLE                               (DDL_ON)
+#define LL_EFM_ENABLE                               (DDL_ON)
+#define LL_EMB_ENABLE                               (DDL_ON)
+#define LL_ETH_ENABLE                               (DDL_ON)
+#define LL_EVENT_PORT_ENABLE                        (DDL_OFF)
+#define LL_FCG_ENABLE                               (DDL_ON)
+#define LL_FCM_ENABLE                               (DDL_ON)
+#define LL_FMAC_ENABLE                              (DDL_ON)
+#define LL_GPIO_ENABLE                              (DDL_ON)
+#define LL_HASH_ENABLE                              (DDL_ON)
+#define LL_HRPWM_ENABLE                             (DDL_ON)
+#define LL_I2C_ENABLE                               (DDL_ON)
+#define LL_I2S_ENABLE                               (DDL_ON)
+#define LL_INTERRUPTS_ENABLE                        (DDL_ON)
+#define LL_INTERRUPTS_SHARE_ENABLE                  (DDL_ON)
+#define LL_KEYSCAN_ENABLE                           (DDL_ON)
+#define LL_MAU_ENABLE                               (DDL_ON)
+#define LL_MDIO_ENABLE                              (DDL_OFF)
+#define LL_MPU_ENABLE                               (DDL_ON)
+#define LL_NFC_ENABLE                               (DDL_ON)
+#define LL_OTS_ENABLE                               (DDL_ON)
+#define LL_PLA_ENABLE                               (DDL_OFF)
+#define LL_PWC_ENABLE                               (DDL_ON)
+#define LL_QSPI_ENABLE                              (DDL_ON)
+#define LL_RMU_ENABLE                               (DDL_ON)
+#define LL_RTC_ENABLE                               (DDL_ON)
+#define LL_SDIOC_ENABLE                             (DDL_ON)
+#define LL_SMC_ENABLE                               (DDL_ON)
+#define LL_SPI_ENABLE                               (DDL_ON)
+#define LL_SRAM_ENABLE                              (DDL_ON)
+#define LL_SWDT_ENABLE                              (DDL_ON)
+#define LL_TMR0_ENABLE                              (DDL_ON)
+#define LL_TMR2_ENABLE                              (DDL_ON)
+#define LL_TMR4_ENABLE                              (DDL_ON)
+#define LL_TMR6_ENABLE                              (DDL_ON)
+#define LL_TMRA_ENABLE                              (DDL_ON)
+#define LL_TRNG_ENABLE                              (DDL_ON)
+#define LL_USART_ENABLE                             (DDL_ON)
+#define LL_USB_ENABLE                               (DDL_OFF)
+#define LL_VREF_ENABLE                              (DDL_OFF)
+#define LL_WDT_ENABLE                               (DDL_ON)
+
+/**
+ * @brief The following is a list of currently supported BSP boards.
+ */
+#define BSP_EV_HC32F4A0_LQFP176                     (1U)
+#define BSP_EV_HC32F4A0_LQFP176_MEM                 (2U)
+#define BSP_EV_HC32F460_LQFP100_V1                  (3U)
+#define BSP_EV_HC32F460_LQFP100_V2                  (4U)
+#define BSP_EV_HC32F451_LQFP100                     (5U)
+#define BSP_EV_HC32F452_LQFP100                     (6U)
+#define BSP_EV_HC32F472_LQFP100                     (7U)
+#define BSP_SK_HC32F4A0_LQFP100                     (8U)
+
+/**
+ * @brief The macro BSP_EV_HC32F4XX is used to specify the BSP board currently
+ * in use.
+ * The value should be set to one of the list of currently supported BSP boards.
+ * @note  If there is no supported BSP board or the BSP function is not used,
+ * the value needs to be set to 0U.
+ */
+#define BSP_EV_HC32F4XX                             (BSP_EV_HC32F460_LQFP100_V2)
+
+/**
+ * @brief This is the list of BSP components to be used.
+ * Select the components you need to use to DDL_ON.
+ */
+#define BSP_24CXX_ENABLE                            (DDL_OFF)
+#define BSP_CY62167EV30LL_ENABLE                    (DDL_OFF)
+#define BSP_IS42S16400J7TLI_ENABLE                  (DDL_OFF)
+#define BSP_IS62WV51216_ENABLE                      (DDL_OFF)
+#define BSP_MT29F2G08AB_ENABLE                      (DDL_OFF)
+#define BSP_NT35510_ENABLE                          (DDL_OFF)
+#define BSP_OV5640_ENABLE                           (DDL_OFF)
+#define BSP_S29GL064N90TFI03_ENABLE                 (DDL_OFF)
+#define BSP_TCA9539_ENABLE                          (DDL_OFF)
+#define BSP_W25QXX_ENABLE                           (DDL_OFF)
+#define BSP_WM8731_ENABLE                           (DDL_OFF)
+
+/**
+ * @brief The macro is used to re-define main function in system_device.c(eg. device=hc32f4a0).
+ * @note  Set value to non-zero if re-define main function.
+ */
+#define RE_DEFINE_MAIN                              (0)
+
+/*******************************************************************************
+ * Global variable definitions ('extern')
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Global function prototypes (definition in C source)
+ ******************************************************************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __HC32F4XX_CONF_H__ */
+
+/*******************************************************************************
+ * EOF (not truncated)
+ ******************************************************************************/

bsp/hc32/ev_hc32f460_lqfp100_v2/board/linker_scripts/link.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_IROM1_start__ = 0x00000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x0007FFFF;
+define symbol __ICFEDIT_region_IROM2_start__ = 0x03000C00;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x03000FFB;
+define symbol __ICFEDIT_region_EROM1_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x1FFF8000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x20026FFF;
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x200F0000;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x200F0FFF;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0xC00;
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+define symbol __ICFEDIT_size_heap__   = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region       =   mem:[from __ICFEDIT_region_IROM1_start__   to __ICFEDIT_region_IROM1_end__]
+                                 | mem:[from __ICFEDIT_region_IROM2_start__   to __ICFEDIT_region_IROM2_end__];
+define region RAM_region       =   mem:[from __ICFEDIT_region_IRAM1_start__   to __ICFEDIT_region_IRAM1_end__]
+                                 | mem:[from __ICFEDIT_region_IRAM2_start__   to __ICFEDIT_region_IRAM2_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/hc32/ev_hc32f460_lqfp100_v2/board/linker_scripts/link.ld

+/******************************************************************************
+ * Copyright (C) 2022, Xiaohua Semiconductor Co., Ltd. All rights reserved.
+ *
+ * This software component is licensed by XHSC under BSD 3-Clause license
+ * (the "License"); You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                    opensource.org/licenses/BSD-3-Clause
+ *
+ */
+/*****************************************************************************/
+/*  File        HC32F460xE.ld                                                */
+/*  Abstract    Linker script for HC32F460 Device with                       */
+/*              512KByte FLASH, 192KByte RAM                                 */
+/*  Version     V1.0                                                          */
+/*  Date        2022-04-28                                                   */
+/*****************************************************************************/
+
+/* Custom defines, according to section 7.7 of the user manual.
+   Take OTP sector 0 for example. */
+__OTP_DATA_START = 0x03000C00;
+__OTP_DATA_SIZE  = 64;
+__OTP_LOCK_START = 0x03000FC0;
+__OTP_LOCK_SIZE  = 4;
+
+/* Use contiguous memory regions for simple. */
+MEMORY
+{
+    FLASH       (rx): ORIGIN = 0x00000000, LENGTH = 512K
+    OTP_DATA    (rx): ORIGIN = __OTP_DATA_START, LENGTH = __OTP_DATA_SIZE
+    OTP_LOCK    (rx): ORIGIN = __OTP_LOCK_START, LENGTH = __OTP_LOCK_SIZE
+    RAM        (rwx): ORIGIN = 0x1FFF8000, LENGTH = 188K
+    RET_RAM    (rwx): ORIGIN = 0x200F0000, LENGTH = 4K
+}
+
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .vectors :
+    {
+        . = ALIGN(4);
+        KEEP(*(.vectors))
+        . = ALIGN(4);
+    } >FLASH
+
+    .icg_sec 0x00000400 :
+    {
+        KEEP(*(.icg_sec))
+    } >FLASH
+
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(4);
+
+        . = ALIGN(4);
+        _etext = .;
+    } >FLASH
+
+    .rodata :
+    {
+        . = ALIGN(4);
+        *(.rodata)
+        *(.rodata*)
+        . = ALIGN(4);
+    } >FLASH
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } >FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } >FLASH
+    __exidx_end = .;
+
+    .preinit_array :
+    {
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+        . = ALIGN(4);
+    } >FLASH
+
+    .init_array :
+    {
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+        . = ALIGN(4);
+    } >FLASH
+
+    .fini_array :
+    {
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+        . = ALIGN(4);
+    } >FLASH
+
+    __etext = ALIGN(4);
+
+    .otp_data_sec :
+    {
+        KEEP(*(.otp_data_sec))
+    } >OTP_DATA
+
+    .otp_lock_sec :
+    {
+        KEEP(*(.otp_lock_sec))
+    } >OTP_LOCK
+
+    .data : AT (__etext)
+    {
+        . = ALIGN(4);
+        __data_start__ = .;
+        *(vtable)
+        *(.data)
+        *(.data*)
+        *(.gnu.linkonce.d*)
+        . = ALIGN(4);
+        *(.ramfunc)
+        *(.ramfunc*)
+        . = ALIGN(4);
+        __data_end__ = .;
+    } >RAM
+
+    __etext_ret_ram = __etext + ALIGN (SIZEOF(.data), 4);
+    .ret_ram_data : AT (__etext_ret_ram)
+    {
+        . = ALIGN(4);
+        __data_start_ret_ram__ = .;
+        *(.ret_ram_data)
+        *(.ret_ram_data*)
+        . = ALIGN(4);
+        __data_end_ret_ram__ = .;
+    } >RET_RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        _sbss = .;
+        __bss_start__ = _sbss;
+        *(.bss)
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = .;
+        __bss_end__ = _ebss;
+    } >RAM
+    __bss_end = .;
+
+    .ret_ram_bss :
+    {
+        . = ALIGN(4);
+        __bss_start_ret_ram__ = .;
+        *(.ret_ram_bss)
+        *(.ret_ram_bss*)
+        . = ALIGN(4);
+        __bss_end_ret_ram__ = .;
+    } >RET_RAM
+
+    .heap_stack (COPY) :
+    {
+        . = ALIGN(8);
+        __end__ = .;
+        PROVIDE(end = .);
+        PROVIDE(_end = .);
+        *(.heap*)
+        . = ALIGN(8);
+        __HeapLimit = .;
+
+        __StackLimit = .;
+        *(.stack*)
+        . = ALIGN(8);
+        __StackTop = .;
+    } >RAM
+
+    /DISCARD/ :
+    {
+        libc.a (*)
+        libm.a (*)
+        libgcc.a (*)
+    }
+
+    .ARM.attributes 0 : { *(.ARM.attributes) }
+
+    PROVIDE(_stack = __StackTop);
+    PROVIDE(_Min_Heap_Size = __HeapLimit - __HeapBase);
+    PROVIDE(_Min_Stack_Size = __StackTop - __StackLimit);
+
+    __RamEnd = ORIGIN(RAM) + LENGTH(RAM);
+    ASSERT(__StackTop <= __RamEnd, "region RAM overflowed with stack")
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/hc32/ev_hc32f460_lqfp100_v2/board/linker_scripts/link.sct

+; ****************************************************************
+; Scatter-Loading Description File
+; ****************************************************************
+LR_IROM1 0x00000000 0x00080000  {    ; load region size_region
+    ER_IROM1 0x00000000 0x00080000  {  ; load address = execution address
+        *.o (RESET, +First)
+        *(InRoot$$Sections)
+        .ANY (+RO)
+        .ANY (+XO)
+    }
+    RW_IRAM1 0x1FFF8000 0x0002F000  {  ; RW data
+        .ANY (+RW +ZI)
+    }
+}
+

bsp/hc32/ev_hc32f460_lqfp100_v2/project.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/hc32/ev_hc32f460_lqfp100_v2/project.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>8000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>3</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>CMSIS_AGDI</Key>
+          <Name>-X"" -O206 -S0 -C0 -P00 -FO7 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_512K -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM) -FF1HC32F460_otp -FS13000C00 -FL13FC -FP1($$Device:HC32F460PETB$FlashARM\HC32F460_otp.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD1FFF8000 -FC1000 -FN1 -FF0HC32F460_512K -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U261009725 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST2 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD1FFF8000 -FC1000 -FN1 -FF0HC32F460_512K.FLM -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>1000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/hc32/ev_hc32f460_lqfp100_v2/rtconfig.h

+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_HOOK_USING_FUNC_PTR
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice optimization */
+
+#define RT_DEBUG
+#define RT_DEBUG_COLOR
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_SMALL_MEM_AS_HEAP
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart4"
+#define RT_VER_NUM 0x40101
+#define ARCH_ARM
+#define RT_USING_CPU_FFS
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+#define RT_USING_MSH
+#define RT_USING_FINSH
+#define FINSH_USING_MSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_CMD_SIZE 80
+#define MSH_USING_BUILT_IN_COMMANDS
+#define FINSH_USING_DESCRIPTION
+#define FINSH_ARG_MAX 10
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_USING_SYSTEM_WORKQUEUE
+#define RT_SYSTEM_WORKQUEUE_STACKSIZE 2048
+#define RT_SYSTEM_WORKQUEUE_PRIORITY 23
+#define RT_USING_SERIAL
+#define RT_USING_SERIAL_V1
+#define RT_SERIAL_USING_DMA
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_PIN
+#define RT_USING_SPI
+
+/* Using USB */
+
+
+/* C/C++ and POSIX layer */
+
+#define RT_LIBC_DEFAULT_TIMEZONE 8
+
+/* POSIX (Portable Operating System Interface) layer */
+
+
+/* Interprocess Communication (IPC) */
+
+
+/* Socket is in the 'Network' category */
+
+
+/* Network */
+
+
+/* Utilities */
+
+
+/* RT-Thread Utestcases */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+/* JSON: JavaScript Object Notation, a lightweight data-interchange format */
+
+
+/* XML: Extensible Markup Language */
+
+
+/* multimedia packages */
+
+/* LVGL: powerful and easy-to-use embedded GUI library */
+
+
+/* u8g2: a monochrome graphic library */
+
+
+/* PainterEngine: A cross-platform graphics application framework written in C language */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+/* enhanced kernel services */
+
+
+/* POSIX extension functions */
+
+
+/* acceleration: Assembly language or algorithmic acceleration packages */
+
+
+/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
+
+
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
+/* peripheral libraries and drivers */
+
+
+/* AI packages */
+
+
+/* miscellaneous packages */
+
+/* project laboratory */
+
+/* samples: kernel and components samples */
+
+
+/* entertainment: terminal games and other interesting software packages */
+
+#define SOC_FAMILY_HC32
+#define SOC_SERIES_HC32F4
+
+/* Hardware Drivers Config */
+
+#define SOC_HC32F460PE
+
+/* Onboard Peripheral Drivers */
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART4
+
+/* Board extended module Drivers */
+
+
+#endif

bsp/hc32/ev_hc32f460_lqfp100_v2/rtconfig.py

+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'C:/Users/XXYYZZ'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iar'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.4'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.ld'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+
+    CXXFLAGS = CFLAGS
+    
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)

bsp/hc32/ev_hc32f460_lqfp100_v2/template.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/hc32/ev_hc32f460_lqfp100_v2/template.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>8000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>3</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>CMSIS_AGDI</Key>
+          <Name>-X"" -O206 -S0 -C0 -P00 -FO7 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_512K -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM) -FF1HC32F460_otp -FS13000C00 -FL13FC -FP1($$Device:HC32F460PETB$FlashARM\HC32F460_otp.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD1FFF8000 -FC1000 -FN1 -FF0HC32F460_512K -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U261009725 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST2 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD1FFF8000 -FC1000 -FN1 -FF0HC32F460_512K.FLM -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>1000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/hc32/ev_hc32f460_lqfp100_v2/template.uvprojx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>HC32F460PETB</Device>
+          <Vendor>HDSC</Vendor>
+          <PackID>HDSC.HC32F460.1.0.9</PackID>
+          <PackURL>https://raw.githubusercontent.com/hdscmcu/pack/master/</PackURL>
+          <Cpu>IROM1(0x00000000,0x80000) IROM2(0x03000C00,0x3FC) IRAM1(0x1FFF8000,0x2F000)  IRAM2(0x200F0000,0x1000) CPUTYPE("Cortex-M4") FPU2 CLOCK(8000000) ESEL ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>CMSIS_AGDI(-S0 -C0 -P0 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_512K -FS00 -FL080000 -FP0($$Device:HC32F460PETB$FlashARM\HC32F460_512K.FLM) -FF1HC32F460_otp -FS103000C00 -FL13FC -FP1($$Device:HC32F460PETB$FlashARM\HC32F460_otp.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:HC32F460PETB$Device\Include\HC32F460PETB.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>../libraries/hc32f460_ddl/drivers/cmsis/Device/HDSC/hc32f4xx/Source/ARM/sfr/HDSC_HC32F460.SFR</SFDFile>
+          <bCustSvd>1</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rtthread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>1</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>1</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x1FFF8000</StartAddress>
+                <Size>0x2F000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x03000C00</StartAddress>
+                <Size>0x3FC</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x1FFF8000</StartAddress>
+                <Size>0x2F000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x200F0000</StartAddress>
+                <Size>0x1000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <vShortEn>0</vShortEn>
+            <vShortWch>0</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x1FFF8000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+</Project>

bsp/hc32/ev_hc32f4a0_lqfp176/.config

@@ -78,7 +78,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -274,6 +274,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -313,6 +314,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -352,6 +354,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LVGL is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -428,6 +431,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
 # CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -459,6 +463,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -502,6 +507,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
 # CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -656,6 +662,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
 # CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 CONFIG_SOC_FAMILY_HC32=y
 CONFIG_SOC_SERIES_HC32F4=y
 
@@ -669,7 +677,6 @@ CONFIG_SOC_HC32F4A0SI=y
 #
 # CONFIG_BSP_USING_ETH is not set
 # CONFIG_BSP_USING_TCA9539 is not set
-# CONFIG_BSP_USING_SPI_FLASH is not set
 
 #
 # On-chip Peripheral Drivers
@@ -690,10 +697,6 @@ CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_USING_UART10 is not set
 # CONFIG_BSP_USING_I2C1 is not set
 # CONFIG_BSP_USING_SPI is not set
-# CONFIG_BSP_USING_RTC is not set
-# CONFIG_BSP_USING_PWM is not set
-# CONFIG_BSP_USING_TIMER is not set
-# CONFIG_BSP_USING_PULSE_ENCODER is not set
 # CONFIG_BSP_USING_ADC is not set
 # CONFIG_BSP_USING_CAN is not set
 

bsp/hc32/ev_hc32f4a0_lqfp176/README.md

@@ -40,18 +40,16 @@ EV_F4A0_LQ176 开发板常用 **板载资源** 如下：
 | **板载外设**  | **支持情况** |               **备注**                |
 | :------------ | :-----------: | :-----------------------------------: |
 | USB 转串口    |      支持     |          使用 UART1                  |
-| SPI Flash     |     支持     |           使用 SPI1                   |
-| LED           |     支持     |           LED                   |
+| LED           |     支持     |           LED                        |
+| ETH           |     支持     |              					     |
+| ADC           |     支持     |                                       |
+| CAN           |     支持     |                                       |
 | **片上外设**  | **支持情况** |               **备注**                |
 | :------------ | :-----------: | :-----------------------------------: |
 | GPIO          |     支持     | PA0, PA1... PI13 ---> PIN: 0, 1...141 |
 | UART          |     支持     |              UART1~10                 |
 | SPI           |     支持     |              SPI1~6                   |
 | I2C           |     支持     |              软件 I2C                 |
-| RTC           |     支持     |      支持外部晶振和内部低速时钟         |
-| PWM           |     支持     |                                       |
-| HWTIMER       |     支持     |                                       |
-| LED           |     支持     |              LED11                    |
 
 
 ## 使用说明
@@ -79,7 +77,7 @@ EV_F4A0_LQ176 开发板常用 **板载资源** 如下：
 
 双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
 
-> 工程默认配置使用 J-LINK 下载程序，点击下载按钮即可下载程序到开发板。
+> 工程默认配置使用板载 DAP 下载程序，点击下载按钮即可下载程序到开发板。
 
 #### 运行结果
 

bsp/hc32/ev_hc32f4a0_lqfp176/applications/main.c

 /*
- * Copyright (C) 2022, Xiaohua Semiconductor Co., Ltd.
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2022, Xiaohua Semiconductor Co., Ltd.
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/hc32/ev_hc32f4a0_lqfp176/board/SConscript

@@ -15,9 +15,6 @@ board_config.c
 if GetDepend(['BSP_USING_TCA9539']):
     src += Glob('ports/tca9539.c')
 
-if GetDepend(['BSP_USING_SPI_FLASH']):
-    src += Glob('ports/spi_flash.c')
-
 path =  [cwd]
 path += [cwd + '/ports']
 path += [cwd + '/config']