Skip to content

R
rt-thread

nix61 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 cda00bf0 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #767 from caogos/master 

[BSP] Modify loongson1c interrupt part code.
上级 6ab02767 5734d52a
隐藏空白更改
内联 并排
Showing with 275 addition and 74 deletion
bsp/ls1cdev/libraries/ls1c_gpio.c
浏览文件 @ cda00bf0
...@@ -204,4 +204,63 @@ unsigned int gpio_get(unsigned int gpio) ...@@ -204,4 +204,63 @@ unsigned int gpio_get(unsigned int gpio)
} }
/**
* 设置中断类型
* @gpio gpio引脚
* @type 触发中断的条件。高电平触发、低电平触发、上升沿触发 or 下降沿触发
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type)
{
volatile unsigned int *int_pol; // 中断极性选择寄存器
volatile unsigned int *int_edge; // 中断边沿选择寄存器
unsigned int port = GPIO_GET_PORT(gpio);
unsigned int pin = GPIO_GET_PIN(gpio);
// 获取寄存器地址
switch (port)
{
case 0: // GPIO[31:0]
int_pol = (volatile unsigned int *)LS1C_INT2_POL;
int_edge = (volatile unsigned int *)LS1C_INT2_EDGE;
break;
case 1: // GPIO[63:32]
int_pol = (volatile unsigned int *)LS1C_INT3_POL;
int_edge = (volatile unsigned int *)LS1C_INT3_EDGE;
break;
case 2: // GPIO[95:64]
int_pol = (volatile unsigned int *)LS1C_INT4_POL;
int_edge = (volatile unsigned int *)LS1C_INT4_EDGE;
break;
}
// 设置中断类型
switch (type)
{
case IRQ_TYPE_EDGE_RISING:
*int_pol |= (1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_EDGE_FALLING:
*int_pol &= ~(1 << pin);
*int_edge |= (1 << pin);
break;
case IRQ_TYPE_LEVEL_HIGH:
*int_pol |= (1 << pin);
*int_edge &= ~(1 << pin);
break;
case IRQ_TYPE_LEVEL_LOW:
*int_pol &= ~(1 << pin);
*int_edge &= ~(1 << pin);
break;
}
return ;
}
bsp/ls1cdev/libraries/ls1c_gpio.h
浏览文件 @ cda00bf0
...@@ -29,6 +29,19 @@ typedef enum{ ...@@ -29,6 +29,19 @@ typedef enum{
}gpio_level_t; }gpio_level_t;
typedef enum {
// 上升沿触发
IRQ_TYPE_EDGE_RISING = 0x00000001,
// 下降沿触发
IRQ_TYPE_EDGE_FALLING = 0x00000002,
IRQ_TYPE_EDGE_BOTH = (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
// 高电平触发
IRQ_TYPE_LEVEL_HIGH = 0x00000004,
// 低电平触发
IRQ_TYPE_LEVEL_LOW = 0x00000008,
IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
}gpio_irq_type_t;
/* /*
...@@ -73,6 +86,13 @@ unsigned int gpio_get(unsigned int gpio); ...@@ -73,6 +86,13 @@ unsigned int gpio_get(unsigned int gpio);
/**
* 设置中断类型
* @gpio gpio引脚
* @type 触发中断的条件。高电平触发、低电平触发、上升沿触发 or 下降沿触发
*/
void gpio_set_irq_type(unsigned int gpio, gpio_irq_type_t type);
#endif #endif
......
bsp/ls1cdev/libraries/ls1c_public.c
浏览文件 @ cda00bf0
...@@ -77,3 +77,41 @@ unsigned int reg_read_32(volatile unsigned int *addr) ...@@ -77,3 +77,41 @@ unsigned int reg_read_32(volatile unsigned int *addr)
/**
* ffs - find first bit set
* @x: the word to search
*
* This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
int ls1c_ffs(int x)
{
int r = 1;
if (!x)
return 0;
if (!(x & 0xffff)) {
x >>= 16;
r += 16;
}
if (!(x & 0xff)) {
x >>= 8;
r += 8;
}
if (!(x & 0xf)) {
x >>= 4;
r += 4;
}
if (!(x & 3)) {
x >>= 2;
r += 2;
}
if (!(x & 1)) {
x >>= 1;
r += 1;
}
return r;
}
bsp/ls1cdev/libraries/ls1c_public.h
浏览文件 @ cda00bf0
...@@ -73,6 +73,12 @@ void reg_write_32(unsigned int data, volatile unsigned int *addr); ...@@ -73,6 +73,12 @@ void reg_write_32(unsigned int data, volatile unsigned int *addr);
unsigned int reg_read_32(volatile unsigned int *addr); unsigned int reg_read_32(volatile unsigned int *addr);
/**
* ffs - find first bit set
* @x: the word to search
*/
int ls1c_ffs(int x);
#endif #endif
bsp/ls1cdev/libraries/ls1c_regs.h
浏览文件 @ cda00bf0
...@@ -74,13 +74,41 @@ ...@@ -74,13 +74,41 @@
// 中断配置寄存器
#define LS1C_INT0_SR (0xbfd01040)
#define LS1C_INT0_EN (0xbfd01044)
#define LS1C_INT0_SET (0xbfd01048)
#define LS1C_INT0_CLR (0xbfd0104c)
#define LS1C_INT0_POL (0xbfd01050)
#define LS1C_INT0_EDGE (0xbfd01054)
#define LS1c_INT1_SR (0xbfd01058)
#define LS1C_INT1_EN (0xbfd0105c)
#define LS1C_INT1_SET (0xbfd01060)
#define LS1C_INT1_CLR (0xbfd01064)
#define LS1C_INT1_POL (0xbfd01068)
#define LS1C_INT1_EDGE (0xbfd0106c)
#define LS1C_INT2_SR (0xbfd01070)
#define LS1C_INT2_EN (0xbfd01074)
#define LS1C_INT2_SET (0xbfd01078)
#define LS1C_INT2_CLR (0xbfd0107c)
#define LS1C_INT2_POL (0xbfd01080)
#define LS1C_INT2_EDGE (0xbfd01084)
#define LS1C_INT3_SR (0xbfd01088)
#define LS1C_INT3_EN (0xbfd0108c)
#define LS1C_INT3_SET (0xbfd01090)
#define LS1C_INT3_CLR (0xbfd01094)
#define LS1C_INT3_POL (0xbfd01098)
#define LS1C_INT3_EDGE (0xbfd0109c)
#define LS1C_INT4_SR (0xbfd010a0)
#define LS1C_INT4_EN (0xbfd010a4)
#define LS1C_INT4_SET (0xbfd010a8)
#define LS1C_INT4_CLR (0xbfd010ac)
#define LS1C_INT4_POL (0xbfd010b0)
#define LS1C_INT4_EDGE (0xbfd010b4)
......
bsp/ls1cdev/rtconfig.h
浏览文件 @ cda00bf0
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
// <integer name="RT_NAME_MAX" description="Maximal size of kernel object name length" default="6" /> // <integer name="RT_NAME_MAX" description="Maximal size of kernel object name length" default="6" />
#define RT_NAME_MAX 10 #define RT_NAME_MAX 10
// <integer name="RT_ALIGN_SIZE" description="Alignment size for CPU architecture data access" default="4" /> // <integer name="RT_ALIGN_SIZE" description="Alignment size for CPU architecture data access" default="4" />
#define RT_ALIGN_SIZE 4 #define RT_ALIGN_SIZE 8
// <integer name="RT_THREAD_PRIORITY_MAX" description="Maximal level of thread priority" default="32"> // <integer name="RT_THREAD_PRIORITY_MAX" description="Maximal level of thread priority" default="32">
// <item description="8">8</item> // <item description="8">8</item>
// <item description="32">32</item> // <item description="32">32</item>
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
// </integer> // </integer>
#define RT_THREAD_PRIORITY_MAX 32 #define RT_THREAD_PRIORITY_MAX 32
// <integer name="RT_TICK_PER_SECOND" description="OS tick per second" default="100" /> // <integer name="RT_TICK_PER_SECOND" description="OS tick per second" default="100" />
#define RT_TICK_PER_SECOND 100 #define RT_TICK_PER_SECOND 1000
// <section name="RT_DEBUG" description="Kernel Debug Configuration" default="true" > // <section name="RT_DEBUG" description="Kernel Debug Configuration" default="true" >
#define RT_DEBUG #define RT_DEBUG
// <bool name="RT_THREAD_DEBUG" description="Thread debug enable" default="false" /> // <bool name="RT_THREAD_DEBUG" description="Thread debug enable" default="false" />
......
bsp/ls1cdev/rtconfig.py
浏览文件 @ cda00bf0
...@@ -12,7 +12,8 @@ if os.getenv('RTT_CC'): ...@@ -12,7 +12,8 @@ if os.getenv('RTT_CC'):
if CROSS_TOOL == 'gcc': if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc' PLATFORM = 'gcc'
EXEC_PATH = '/opt/opt/gcc-4.3-ls232/bin' # EXEC_PATH = '/opt/opt/gcc-4.3-ls232/bin'
EXEC_PATH = r'D:\mgc\embedded\codebench\bin'
else: else:
print '================ERROR===========================' print '================ERROR==========================='
print 'Not support %s yet!' % CROSS_TOOL print 'Not support %s yet!' % CROSS_TOOL
......
libcpu/mips/loongson_1c/interrupt.c
浏览文件 @ cda00bf0
...@@ -18,8 +18,10 @@ ...@@ -18,8 +18,10 @@
#include <rtthread.h> #include <rtthread.h>
#include <rthw.h> #include <rthw.h>
#include "ls1c.h" #include "ls1c.h"
#include "ls1c_public.h"
#define MAX_INTR 32
#define MAX_INTR (LS1C_NR_IRQS)
extern rt_uint32_t rt_interrupt_nest; extern rt_uint32_t rt_interrupt_nest;
rt_uint32_t rt_interrupt_from_thread; rt_uint32_t rt_interrupt_from_thread;
...@@ -50,13 +52,26 @@ static void rt_hw_interrupt_handler(int vector, void *param) ...@@ -50,13 +52,26 @@ static void rt_hw_interrupt_handler(int vector, void *param)
void rt_hw_interrupt_init(void) void rt_hw_interrupt_init(void)
{ {
rt_int32_t idx; rt_int32_t idx;
rt_int32_t i;
rt_uint32_t c0_status = 0;
// 设置协处理器0的状态寄存器SR的IM7-2，允许中断
c0_status = read_c0_status();
c0_status |= 0xFC00;
write_c0_status(c0_status);
/* pci active low */ // 龙芯1c的中断分为五组
ls1c_hw0_icregs->int_pol = -1; //must be done here 20110802 lgnq for (i=0; i<5; i++)
/* make all interrupts level triggered */ {
(ls1c_hw0_icregs+0)->int_edge = 0x0000e000; /* disable */
/* mask all interrupts */ (ls1c_hw0_icregs+i)->int_en = 0x0;
(ls1c_hw0_icregs+0)->int_clr = 0xffffffff; /* pci active low */
(ls1c_hw0_icregs+i)->int_pol = -1; //must be done here 20110802 lgnq
/* make all interrupts level triggered */
(ls1c_hw0_icregs+i)->int_edge = 0x00000000;
/* mask all interrupts */
(ls1c_hw0_icregs+i)->int_clr = 0xffffffff;
}
rt_memset(irq_handle_table, 0x00, sizeof(irq_handle_table)); rt_memset(irq_handle_table, 0x00, sizeof(irq_handle_table));
for (idx = 0; idx < MAX_INTR; idx ++) for (idx = 0; idx < MAX_INTR; idx ++)
...@@ -115,6 +130,51 @@ rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler, ...@@ -115,6 +130,51 @@ rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
return old_handler; return old_handler;
} }
/**
* 执行中断处理函数
* @IRQn 中断号
*/
void ls1c_do_IRQ(int IRQn)
{
rt_isr_handler_t irq_func;
void *param;
// 找到中断处理函数
irq_func = irq_handle_table[IRQn].handler;
param = irq_handle_table[IRQn].param;
// 执行中断处理函数
irq_func(IRQn, param);
#ifdef RT_USING_INTERRUPT_INFO
irq_handle_table[IRQn].counter++;
#endif
return ;
}
void ls1c_irq_dispatch(int n)
{
rt_uint32_t intstatus, irq;
/* Receive interrupt signal, compute the irq */
intstatus = (ls1c_hw0_icregs+n)->int_isr & (ls1c_hw0_icregs+n)->int_en;
if (0 == intstatus)
return ;
// 执行中断处理函数
irq = ls1c_ffs(intstatus) - 1;
ls1c_do_IRQ((n<<5) + irq);
/* ack interrupt */
(ls1c_hw0_icregs+n)->int_clr |= (1 << irq);
return ;
}
void rt_interrupt_dispatch(void *ptreg) void rt_interrupt_dispatch(void *ptreg)
{ {
int irq; int irq;
...@@ -139,50 +199,25 @@ void rt_interrupt_dispatch(void *ptreg) ...@@ -139,50 +199,25 @@ void rt_interrupt_dispatch(void *ptreg)
{ {
rt_hw_timer_handler(); rt_hw_timer_handler();
} }
else if (pending_im & CAUSEF_IP2)
if (pending_im & CAUSEF_IP2)
{ {
/* the hardware interrupt */ ls1c_irq_dispatch(0);
status = ls1c_hw0_icregs->int_isr;
if (!status)
return;
for (irq = MAX_INTR; irq > 0; --irq)
{
if ((status & (1 << irq)))
{
status &= ~(1 << irq);
irq_func = irq_handle_table[irq].handler;
param = irq_handle_table[irq].param;
/* do interrupt */
irq_func(irq, param);
#ifdef RT_USING_INTERRUPT_INFO
irq_handle_table[irq].counter++;
#endif /* RT_USING_INTERRUPT_INFO */
/* ack interrupt */
ls1c_hw0_icregs->int_clr |= (1 << irq);
}
}
} }
else if (pending_im & CAUSEF_IP3) else if (pending_im & CAUSEF_IP3)
{ {
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__); ls1c_irq_dispatch(1);
} }
else if (pending_im & CAUSEF_IP4) else if (pending_im & CAUSEF_IP4)
{ {
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__); ls1c_irq_dispatch(2);
} }
else if (pending_im & CAUSEF_IP5) else if (pending_im & CAUSEF_IP5)
{ {
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__); ls1c_irq_dispatch(3);
} }
else if (pending_im & CAUSEF_IP6) else if (pending_im & CAUSEF_IP6)
{ {
rt_kprintf("%s %d\r\n", __FUNCTION__, __LINE__); ls1c_irq_dispatch(4);
} }
} }
......
libcpu/mips/loongson_1c/ls1c.h
浏览文件 @ cda00bf0
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
#define LS1C_ACPI_IRQ 0 #define LS1C_ACPI_IRQ 0
#define LS1C_HPET_IRQ 1 #define LS1C_HPET_IRQ 1
#define LS1C_UART0_IRQ 2 //#define LS1C_UART0_IRQ 3 // linux中是3，v1.4版本的1c手册中是2，暂屏蔽，待确认
#define LS1C_UART1_IRQ 4 #define LS1C_UART1_IRQ 4
#define LS1C_UART2_IRQ 5 #define LS1C_UART2_IRQ 5
#define LS1C_CAN0_IRQ 6 #define LS1C_CAN0_IRQ 6
...@@ -32,41 +32,55 @@ ...@@ -32,41 +32,55 @@
#define LS1C_KB_IRQ 12 #define LS1C_KB_IRQ 12
#define LS1C_DMA0_IRQ 13 #define LS1C_DMA0_IRQ 13
#define LS1C_DMA1_IRQ 14 #define LS1C_DMA1_IRQ 14
#define LS1C_NAND_IRQ 15 #define LS1C_DMA2_IRQ 15
#define LS1C_I2C0_IRQ 16 #define LS1C_NAND_IRQ 16
#define LS1C_I2C1_IRQ 17 #define LS1C_PWM0_IRQ 17
#define LS1C_PWM0_IRQ 18 #define LS1C_PWM1_IRQ 18
#define LS1C_PWM1_IRQ 19 #define LS1C_PWM2_IRQ 19
#define LS1C_PWM2_IRQ 20 #define LS1C_PWM3_IRQ 20
#define LS1C_PWM3_IRQ 21 #define LS1C_RTC_INT0_IRQ 21
#define LS1C_LPC_IRQ 22 #define LS1C_RTC_INT1_IRQ 22
#define LS1C_EHCI_IRQ 32 #define LS1C_RTC_INT2_IRQ 23
#define LS1C_OHCI_IRQ 33 #define LS1C_UART3_IRQ 29
#define LS1C_GMAC1_IRQ 34 #define LS1C_ADC_IRQ 30
#define LS1C_GMAC2_IRQ 35 #define LS1C_SDIO_IRQ 31
#define LS1C_SATA_IRQ 36
#define LS1C_GPU_IRQ 37
#define LS1C_PCI_INTA_IRQ 38 #define LS1C_EHCI_IRQ (32+0)
#define LS1C_PCI_INTB_IRQ 39 #define LS1C_OHCI_IRQ (32+1)
#define LS1C_PCI_INTC_IRQ 40 #define LS1C_OTG_IRQ (32+2)
#define LS1C_PCI_INTD_IRQ 41 #define LS1C_MAC_IRQ (32+3)
#define LS1C_CAM_IRQ (32+4)
#define LS1C_UART4_IRQ (32+5)
#define LS1C_UART5_IRQ (32+6)
#define LS1C_UART6_IRQ (32+7)
#define LS1C_UART7_IRQ (32+8)
#define LS1C_UART8_IRQ (32+9)
#define LS1C_UART9_IRQ (32+13)
#define LS1C_UART10_IRQ (32+14)
#define LS1C_UART11_IRQ (32+15)
#define LS1C_I2C2_IRQ (32+17)
#define LS1C_I2C1_IRQ (32+18)
#define LS1C_I2C0_IRQ (32+19)
#define LS1C_GPIO_IRQ 64 #define LS1C_GPIO_IRQ 64
#define LS1C_GPIO_FIRST_IRQ 64 #define LS1C_GPIO_FIRST_IRQ 64
#define LS1C_GPIO_IRQ_COUNT 96 #define LS1C_GPIO_IRQ_COUNT 96
#define LS1C_GPIO_LAST_IRQ (LS1C_GPIO_FIRST_IRQ + LS1C_GPIO_IRQ_COUNT-1) #define LS1C_GPIO_LAST_IRQ (LS1C_GPIO_FIRST_IRQ + LS1C_GPIO_IRQ_COUNT-1)
#define INT_PCI_INTA (1<<6)
#define INT_PCI_INTB (1<<7)
#define INT_PCI_INTC (1<<8)
#define INT_PCI_INTD (1<<9)
#define LS1C_LAST_IRQ 159 #define LS1C_LAST_IRQ 159
#define MIPS_CPU_TIMER_IRQ 167
#define LS1C_INTREG_BASE 0xbfd01040 #define LS1C_INTREG_BASE 0xbfd01040
#define LS1C_DMA_IRQ_BASE 168 // 龙芯1c的中断分为五组，每组32个
#define LS1C_DMA_IRQ_COUNT 16 #define LS1C_NR_IRQS (32*5)
// GPIO编号和中断号之间的互相转换
#define LS1C_GPIO_TO_IRQ(GPIOn) (LS1C_GPIO_FIRST_IRQ + (GPIOn))
#define LS1C_IRQ_TO_GPIO(IRQn) ((IRQn) - LS1C_GPIO_FIRST_IRQ)
struct ls1c_intc_regs struct ls1c_intc_regs
{ {
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或