[BSP] CH32V307 add drv_adc (#6431)

添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用

bsp/wch/risc-v/Libraries/ch32_drivers/SConscript

@@ -8,7 +8,6 @@ cwd = GetCurrentDir()
 src = Split("""
 """)
 
-
 if  GetDepend('SOC_RISCV_FAMILY_CH32'):
 
     if GetDepend('RT_USING_PIN'):
@@ -17,13 +16,11 @@ if  GetDepend('SOC_RISCV_FAMILY_CH32'):
     if GetDepend(['RT_USING_SERIAL', 'BSP_USING_UART']):
         src += ['drv_usart.c']
 
-
-
-
+    if GetDepend('RT_USING_ADC'):
+        src += ['drv_adc.c']
 
 path =  [cwd]
 
-
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path)
 
 Return('group')

bsp/wch/risc-v/Libraries/ch32_drivers/drv_adc.c

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-09-16     linshire     the first version which add from wch
+ */
+
+#include <board.h>
+#include <rtthread.h>
+#include <rtdevice.h>
+#include "drv_adc.h"
+
+#if defined(BSP_USING_ADC1) || defined(BSP_USING_ADC2)
+
+//#define DRV_DEBUG
+#define LOG_TAG              "drv.adc"
+#include <drv_log.h>
+
+static ADC_HandleTypeDef adc_config[] =
+{
+#ifdef BSP_USING_ADC1
+    {                                                                  \
+        .Instance                       = ADC1,                        \
+        .Init.ADC_Mode                  = ADC_Mode_Independent,        \
+        .Init.ADC_ScanConvMode          = DISABLE,                     \
+        .Init.ADC_ContinuousConvMode    = DISABLE,                     \
+        .Init.ADC_ExternalTrigConv      = ADC_ExternalTrigConv_None,   \
+        .Init.ADC_DataAlign             = ADC_DataAlign_Right,         \
+        .Init.ADC_NbrOfChannel          = 1,                           \
+    },
+#endif
+
+#ifdef BSP_USING_ADC2
+    {                                                                  \
+        .Instance                       = ADC2,                        \
+        .Init.ADC_Mode                  = ADC_Mode_Independent,        \
+        .Init.ADC_ScanConvMode          = DISABLE,                     \
+        .Init.ADC_ContinuousConvMode    = DISABLE,                     \
+        .Init.ADC_ExternalTrigConv      = ADC_ExternalTrigConv_None,   \
+        .Init.ADC_DataAlign             = ADC_DataAlign_Right,         \
+        .Init.ADC_NbrOfChannel          = 1,                           \
+    }
+#endif
+};
+
+struct ch32_adc
+{
+    ADC_HandleTypeDef      ADC_Handler;
+    struct rt_adc_device   ch32_adc_device;
+};
+
+static struct ch32_adc ch32_adc_obj[sizeof(adc_config) / sizeof(adc_config[0])];
+
+static rt_uint8_t ch32_adc_get_resolution(struct rt_adc_device *device)
+{
+    //the resolution  which can not be changed is just 12bit;
+    return 12;
+}
+
+static rt_int16_t ch32_adc_get_vref (struct rt_adc_device *device)
+{
+    RT_ASSERT(device);
+    return 3300;
+}
+
+static rt_err_t ch32_adc_enabled(struct rt_adc_device *device, rt_uint32_t channel, rt_bool_t enabled)
+{
+    ADC_HandleTypeDef *ch32_adc_handler;
+    RT_ASSERT(device != RT_NULL);
+    ch32_adc_handler = device->parent.user_data;
+
+    if (enabled)
+    {
+        ADC_Cmd(ch32_adc_handler->Instance, ENABLE);
+    }
+    else
+    {
+        ADC_Cmd(ch32_adc_handler->Instance, DISABLE);
+    }
+
+    return RT_EOK;
+}
+
+static rt_uint32_t ch32_adc_get_channel(rt_uint32_t channel)
+{
+    rt_uint32_t ch32_channel = 0;
+
+    switch (channel)
+    {
+    case  0:
+        ch32_channel = ADC_Channel_0;
+        break;
+    case  1:
+        ch32_channel = ADC_Channel_1;
+        break;
+    case  2:
+        ch32_channel = ADC_Channel_2;
+        break;
+    case  3:
+        ch32_channel = ADC_Channel_3;
+        break;
+    case  4:
+        ch32_channel = ADC_Channel_4;
+        break;
+    case  5:
+        ch32_channel = ADC_Channel_5;
+        break;
+    case  6:
+        ch32_channel = ADC_Channel_6;
+        break;
+    case  7:
+        ch32_channel = ADC_Channel_7;
+        break;
+    case  8:
+        ch32_channel = ADC_Channel_8;
+        break;
+    case  9:
+        ch32_channel = ADC_Channel_9;
+        break;
+    case 10:
+        ch32_channel = ADC_Channel_10;
+        break;
+    case 11:
+        ch32_channel = ADC_Channel_11;
+        break;
+    case 12:
+        ch32_channel = ADC_Channel_12;
+        break;
+    case 13:
+        ch32_channel = ADC_Channel_13;
+        break;
+    case 14:
+        ch32_channel = ADC_Channel_14;
+        break;
+    case 15:
+        ch32_channel = ADC_Channel_15;
+        break;
+#ifdef ADC_CHANNEL_16
+    case 16:
+        ch32_channel = ADC_Channel_16;
+        break;
+#endif /* ADC_CHANNEL_16 */
+#ifdef ADC_CHANNEL_17
+    case 17:
+        ch32_channel = ADC_Channel_17;
+        break;
+#endif /* ADC_CHANNEL_17 */
+    case 18:
+        ch32_channel = ADC_Channel_18;
+        break;
+#ifdef ADC_CHANNEL_19
+    case 19:
+        ch32_channel = ADC_Channel_19;
+        break;
+#endif /* ADC_CHANNEL_19 */
+    }
+
+    return ch32_channel;
+}
+
+static rt_err_t ch32_get_adc_value(struct rt_adc_device *device, rt_uint32_t channel, rt_uint32_t *value)
+{
+    ADC_ChannelConfTypeDef ADC_ChanConf;
+    ADC_HandleTypeDef *ch32_adc_handler;
+
+    RT_ASSERT(device != RT_NULL);
+    RT_ASSERT(value != RT_NULL);
+
+    ch32_adc_handler = device->parent.user_data;
+
+    rt_memset(&ADC_ChanConf, 0, sizeof(ADC_ChanConf));
+
+#ifndef ADC_CHANNEL_16
+    if (channel == 16)
+    {
+        LOG_E("ADC channel must not be 16.");
+        return -RT_ERROR;
+    }
+#endif
+
+/* ADC channel number is up to 17 */
+#if !defined(ADC_CHANNEL_18)
+    if (channel <= 17)
+/* ADC channel number is up to 19 */
+#elif defined(ADC_CHANNEL_19)
+    if (channel <= 19)
+/* ADC channel number is up to 18 */
+#else
+    if (channel <= 18)
+#endif
+    {
+        /* set ch32 ADC channel */
+        ADC_ChanConf.Channel =  ch32_adc_get_channel(channel);
+    }
+    else
+    {
+#if !defined(ADC_CHANNEL_18)
+        LOG_E("ADC channel must be between 0 and 17.");
+#elif defined(ADC_CHANNEL_19)
+        LOG_E("ADC channel must be between 0 and 19.");
+#else
+        LOG_E("ADC channel must be between 0 and 18.");
+#endif
+        return -RT_ERROR;
+    }
+
+    ADC_ChanConf.Rank = 1;
+    ADC_ChanConf.SamplingTime = ADC_SampleTime_239Cycles5;
+    ADC_RegularChannelConfig(ch32_adc_handler->Instance,ADC_ChanConf.Channel , ADC_ChanConf.Rank, ADC_ChanConf.SamplingTime );
+
+    /* start ADC */
+    ADC_SoftwareStartConvCmd(ch32_adc_handler->Instance, ENABLE);
+    /* Wait for the ADC to convert */
+    while(!ADC_GetFlagStatus(ch32_adc_handler->Instance, ADC_FLAG_EOC ));
+    /* get ADC value */
+    *value = (rt_uint32_t)ADC_GetConversionValue(ch32_adc_handler->Instance);
+    ADC_ClearFlag( ch32_adc_handler->Instance, ADC_FLAG_EOC);
+
+    return RT_EOK;
+}
+
+static const struct rt_adc_ops ch32_adc_ops =
+{
+    .enabled = ch32_adc_enabled,
+    .convert = ch32_get_adc_value,
+    .get_resolution = ch32_adc_get_resolution,
+    .get_vref = ch32_adc_get_vref
+};
+
+static int ch32_adc_init(void)
+{
+    int result = RT_EOK;
+    /* save adc name */
+    char name_buf[5] = {'a', 'd', 'c', '0', 0};
+    int i = 0;
+
+    for (i = 0; i < sizeof(adc_config) / sizeof(adc_config[0]); i++)
+    {
+        /* ADC init */
+        name_buf[3] = '0';
+        ch32_adc_obj[i].ADC_Handler = adc_config[i];
+#if defined(ADC1)
+        if (ch32_adc_obj[i].ADC_Handler.Instance == ADC1)
+        {
+            name_buf[3] = '1';
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE );
+        }
+#endif
+#if defined(ADC2)
+        if (ch32_adc_obj[i].ADC_Handler.Instance == ADC2)
+        {
+            name_buf[3] = '2';
+            RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC2, ENABLE );
+        }
+#endif
+        {
+            ADC_Init(ch32_adc_obj[i].ADC_Handler.Instance,&ch32_adc_obj[i].ADC_Handler.Init );
+            /* register ADC device */
+            if (rt_hw_adc_register(&ch32_adc_obj[i].ch32_adc_device, name_buf, &ch32_adc_ops, &ch32_adc_obj[i].ADC_Handler) == RT_EOK)
+            {
+                LOG_D("%s init success", name_buf);
+            }
+            else
+            {
+                LOG_E("%s register failed", name_buf);
+                result = -RT_ERROR;
+            }
+        }
+    }
+
+    return result;
+}
+INIT_DEVICE_EXPORT(ch32_adc_init);
+
+#endif /* BSP_USING_ADC */

bsp/wch/risc-v/Libraries/ch32_drivers/drv_adc.h

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-09-16     linshire     add some operation function
+ * 2021-09-09     WCH          the first version
+ */
+#ifndef DRV_ADC_H__
+#define DRV_ADC_H__
+typedef struct
+{
+    ADC_TypeDef                   *Instance;
+    ADC_InitTypeDef                Init;
+}ADC_HandleTypeDef;
+
+typedef struct
+{
+    uint32_t     Channel;
+    uint32_t     Rank;
+    uint32_t     SamplingTime;
+    uint32_t     Offset;
+}ADC_ChannelConfTypeDef;
+
+#endif

bsp/wch/risc-v/ch32v307v-r1/board/Kconfig

@@ -14,38 +14,76 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_SERIAL
         default n
 
-        if BSP_USING_UART
-            config BSP_USING_UART1
-            bool "Enable UART1"
-            default n
+    if BSP_USING_UART
+       config BSP_USING_UART1
+           bool "Enable UART1"
+           default n
+
+       config BSP_USING_UART2
+           bool "Enable UART2"
+           default n
+
+       config BSP_USING_UART3
+           bool "Enable UART3"
+           default n
+
+       config BSP_USING_UART4
+           bool "Enable UART4"
+           default n
+
+       config BSP_USING_UART5
+           bool "Enable UART5"
+           default n
+
+       config BSP_USING_UART6
+           bool "Enable UART6"
+           default n
+
+       config BSP_USING_UART7
+           bool "Enable UART7"
+           default n
+
+       config BSP_USING_UART8
+           bool "Enable UART8"
+           default n
+    endif
+   
+    config BSP_USING_ADC
+        bool "Enable ADC"
+        select RT_USING_ADC
+        default n
 
-            config BSP_USING_UART2
-            bool "Enable UART2"
-            default n
+        if BSP_USING_ADC
+           config BSP_USING_ADC1
+               bool "Enable ADC1"
+               default n
 
-            config BSP_USING_UART3
-            bool "Enable UART3"
-            default n
+           config BSP_USING_ADC2
+               bool "Enable ADC2"
+               default n
 
-            config BSP_USING_UART4
-            bool "Enable UART4"
-            default n
+           config ADC_CHANNEL_16
+               bool "Enable ADC CHANNEL 16 (inside temperature)"
+               default n    
 
-            config BSP_USING_UART5
-            bool "Enable UART5"
-            default n
+           config ADC_CHANNEL_17
+               bool "Enable ADC CHANNEL 17 (inside Verf)"
+               default n    
+        endif
 
-            config BSP_USING_UART6
-            bool "Enable UART6"
+    config BSP_USING_DAC
+        bool "Enable DAC"
+            select RT_USING_DAC
             default n
 
-            config BSP_USING_UART7
-            bool "Enable UART7"
-            default n
+        if BSP_USING_DAC
+            config BSP_USING_DAC_CHANNEL1
+                bool "Enable DAC CHANNEL1"
+                default n
 
-            config BSP_USING_UART8
-            bool "Enable UART8"
-            default n
+            config BSP_USING_DAC_CHANNEL2
+                bool "Enable DAC CHANNEL2"
+                default n
         endif
 
 endmenu