并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能

* [arduino][stm32f427-robomaster-a] : 对接RTduino

* Update README.md

* Update pins_arduino.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

增加静态object 名字，用户可以根据内存实际使用情况决定使用动态还是静态。适用于资源极度受限的情况下使用。该功能在RT-Thread完整版本中不常用，主要用于RT-Thread Nano，以缩减对内存的占用。由于没有动态拼接支持，在静态名字下，空闲线程的名字在多核时将命名成相同的名字。

* add nrf5340 bsp,add uarte and gpio drv for 5340

* [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340
Co-authored-by: Nandrew li <andrew.li@nordicsemi.no>

* [smart/aarch64] sync aarch64

* [tools] 所有dist都打zip包

* 完善scons --dist/dist-ide --project-name  --project-path命令

* Update thread-comm.md

* Update documentation/thread-comm/thread-comm.md
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* [dfs] sync cromfs

* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration

* [format] fix some format issue.

* [bsp][core-v-mcu]兼容原有FreeRTOS函数接口，兼容CLI

* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数

* 规范代码格式

* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐

* [bsp][lpc55sxx] add support for LPC55S16

* [bsp][lpc55s16] formating LPC55S16 driver

* [sensor][cmd] add sensor_get_type/vender/unit_name functions

* rename sensor folder

* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support

https://github.com/armink/SFUD/commit/db9a1746df24142bd762378bc4e0dcf65b668b2d

Co-authored-by: 1516081466@qq.com <ws051000>

* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef

* fix usage of rt_event for drv_spi.c in renesas's libraries.

* add core-v-mcu bsp

* 规范bsp格式 添加readme

* 修改readme

Co-authored-by: 1516081466@qq.com <ws051000>

* add ra4m2 soc support, add sci spi support for ra4m2

* update ra4m2-eco/README.md

* update ra4m2-eco/README.md

* rename board picture name.

* reduce picture size, update README.md, remove file 'Target 1.bat'

* reduce picture size