remove Evaluator.Accuracy

benchmark/cluster/vgg16/vgg16_fluid.py

 #   Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved.
-# 
+#
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
-# 
+#
 #     http://www.apache.org/licenses/LICENSE-2.0
-# 
+#
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
@@ -138,13 +138,14 @@ def main():
     avg_cost = fluid.layers.mean(x=cost)
 
     # Evaluator
-    accuracy = fluid.evaluator.Accuracy(input=predict, label=label)
+    batch_size = fluid.layers.create_tensor(dtype='int64')
+    batch_acc = fluid.layers.accuracy(
+        input=predict, label=label, total=batch_size)
 
     # inference program
     inference_program = fluid.default_main_program().clone()
     with fluid.program_guard(inference_program):
-        test_target = accuracy.metrics + accuracy.states
-        inference_program = fluid.io.get_inference_program(test_target)
+        inference_program = fluid.io.get_inference_program(batch_acc)
 
     # Optimization
     optimizer = fluid.optimizer.Adam(learning_rate=args.learning_rate)
@@ -157,27 +158,30 @@ def main():
 
     # test
     def test(exe):
-        accuracy.reset(exe)
+        test_pass_acc = fluid.average.WeightedAverage()
         for batch_id, data in enumerate(test_reader()):
             img_data = np.array(map(lambda x: x[0].reshape(data_shape),
                                     data)).astype("float32")
             y_data = np.array(map(lambda x: x[1], data)).astype("int64")
             y_data = y_data.reshape([-1, 1])
 
-            exe.run(inference_program,
-                    feed={"pixel": img_data,
-                          "label": y_data})
+            outs = exe.run(inference_program,
+                           feed={"pixel": img_data,
+                                 "label": y_data},
+                           fetch_list=[batch_acc, batch_size])
+            test_pass_acc.add(value=np.array(outs[0]), weight=np.array(outs[1]))
 
-        return accuracy.eval(exe)
+        return test_pass_acc.eval()
 
     def train_loop(exe, trainer_prog):
         iters = 0
         ts = time.time()
+        train_pass_acc = fluid.average.WeightedAverage()
         for pass_id in range(args.num_passes):
             # train
             start_time = time.time()
             num_samples = 0
-            accuracy.reset(exe)
+            train_pass_acc.reset()
             with profiler.profiler("CPU", 'total') as prof:
                 for batch_id, data in enumerate(train_reader()):
                     ts = time.time()
@@ -187,13 +191,14 @@ def main():
                     y_data = np.array(map(lambda x: x[1], data)).astype("int64")
                     y_data = y_data.reshape([-1, 1])
 
-                    loss, acc = exe.run(
+                    loss, acc, b_size = exe.run(
                         trainer_prog,
                         feed={"pixel": img_data,
                               "label": y_data},
-                        fetch_list=[avg_cost] + accuracy.metrics)
+                        fetch_list=[avg_cost, batch_acc, batch_size])
                     iters += 1
                     num_samples += len(data)
+                    train_pass_acc.add(value=acc, weight=b_size)
                     print(
                         "Pass = %d, Iters = %d, Loss = %f, Accuracy = %f, Speed = %.2f img/s"
                         % (pass_id, iters, loss, acc,
@@ -201,7 +206,7 @@ def main():
                     )  # The accuracy is the accumulation of batches, but not the current batch.
 
             pass_elapsed = time.time() - start_time
-            pass_train_acc = accuracy.eval(exe)
+            pass_train_acc = train_pass_acc.eval()
             pass_test_acc = test(exe)
             print(
                 "Pass = %d, Training performance = %f imgs/s, Train accuracy = %f, Test accuracy = %f\n"

python/paddle/fluid/__init__.py

@@ -29,6 +29,7 @@ import optimizer
 import learning_rate_decay
 import backward
 import regularizer
+import average
 from param_attr import ParamAttr, WeightNormParamAttr
 from data_feeder import DataFeeder
 from core import LoDTensor, CPUPlace, CUDAPlace

python/paddle/fluid/evaluator.py

@@ -105,44 +105,6 @@ class Evaluator(object):
         return state
 
 
-class Accuracy(Evaluator):
-    """
-    Average Accuracy for multiple mini-batches.
-    """
-
-    def __init__(self, input, label, k=1, **kwargs):
-        super(Accuracy, self).__init__("accuracy", **kwargs)
-        main_program = self.helper.main_program
-        if main_program.current_block().idx != 0:
-            raise ValueError("You can only invoke Evaluator in root block")
-
-        self.total = self.create_state(dtype='int64', shape=[1], suffix='total')
-        self.correct = self.create_state(
-            dtype='int64', shape=[1], suffix='correct')
-        total = self.helper.create_tmp_variable(dtype='int')
-        correct = self.helper.create_tmp_variable(dtype='int')
-        acc = layers.accuracy(
-            input=input, label=label, k=k, total=total, correct=correct)
-        total = layers.cast(x=total, dtype='int64')
-        correct = layers.cast(x=correct, dtype='int64')
-        layers.sums(input=[self.total, total], out=self.total)
-        layers.sums(input=[self.correct, correct], out=self.correct)
-
-        self.metrics.append(acc)
-
-    def eval(self, executor, eval_program=None):
-        if eval_program is None:
-            eval_program = Program()
-        block = eval_program.current_block()
-        with program_guard(main_program=eval_program):
-            total = _clone_var_(block, self.total)
-            correct = _clone_var_(block, self.correct)
-            total = layers.cast(total, dtype='float32')
-            correct = layers.cast(correct, dtype='float32')
-            out = layers.elementwise_div(x=correct, y=total)
-        return np.array(executor.run(eval_program, fetch_list=[out])[0])
-
-
 class ChunkEvaluator(Evaluator):
     """
     Accumulate counter numbers output by chunk_eval from mini-batches and

python/paddle/fluid/tests/book_memory_optimization/test_memopt_image_classification_train.py

@@ -122,7 +122,8 @@ avg_cost = fluid.layers.mean(cost)
 optimizer = fluid.optimizer.Adam(learning_rate=0.001)
 opts = optimizer.minimize(avg_cost)
 
-accuracy = fluid.evaluator.Accuracy(input=predict, label=label)
+batch_size = fluid.layers.create_tensor(dtype='int64')
+batch_acc = fluid.layers.accuracy(input=predict, label=label, total=batch_size)
 
 fluid.memory_optimize(fluid.default_main_program())
 
@@ -144,13 +145,17 @@ feeder = fluid.DataFeeder(place=place, feed_list=[images, label])
 exe.run(fluid.default_startup_program())
 
 i = 0
+
+accuracy = fluid.average.WeightedAverage()
 for pass_id in range(PASS_NUM):
-    accuracy.reset(exe)
+    accuracy.reset()
     for data in train_reader():
-        loss, acc = exe.run(fluid.default_main_program(),
-                            feed=feeder.feed(data),
-                            fetch_list=[avg_cost] + accuracy.metrics)
-        pass_acc = accuracy.eval(exe)
+        loss, acc, weight = exe.run(
+            fluid.default_main_program(),
+            feed=feeder.feed(data),
+            fetch_list=[avg_cost, batch_acc, batch_size])
+        accuracy.add(value=acc, weight=weight)
+        pass_acc = accuracy.eval()
         print("loss:" + str(loss) + " acc:" + str(acc) + " pass_acc:" + str(
             pass_acc))
         # this model is slow, so if we can train two mini batch, we think it works properly.

python/paddle/fluid/tests/unittests/test_profiler.py

@@ -37,7 +37,9 @@ class TestProfiler(unittest.TestCase):
             label = fluid.layers.data(name='y', shape=[1], dtype='int64')
             cost = fluid.layers.cross_entropy(input=predict, label=label)
             avg_cost = fluid.layers.mean(cost)
-            accuracy = fluid.evaluator.Accuracy(input=predict, label=label)
+            batch_size = fluid.layers.create_tensor(dtype='int64')
+            batch_acc = fluid.layers.accuracy(
+                input=predict, label=label, total=batch_size)
 
         optimizer = fluid.optimizer.Momentum(learning_rate=0.001, momentum=0.9)
         opts = optimizer.minimize(avg_cost, startup_program=startup_program)
@@ -46,7 +48,7 @@ class TestProfiler(unittest.TestCase):
         exe = fluid.Executor(place)
         exe.run(startup_program)
 
-        accuracy.reset(exe)
+        pass_acc_calculator = fluid.average.WeightedAverage()
         with profiler.profiler(state, 'total') as prof:
             for iter in range(10):
                 if iter == 2:
@@ -57,9 +59,11 @@ class TestProfiler(unittest.TestCase):
                 outs = exe.run(main_program,
                                feed={'x': x,
                                      'y': y},
-                               fetch_list=[avg_cost] + accuracy.metrics)
+                               fetch_list=[avg_cost, batch_acc, batch_size])
                 acc = np.array(outs[1])
-                pass_acc = accuracy.eval(exe)
+                b_size = np.array(outs[2])
+                pass_acc_calculator.add(value=acc, weight=b_size)
+                pass_acc = pass_acc_calculator.eval()
 
     def test_cpu_profiler(self):
         self.net_profiler('CPU')