adapter_khz 10000interface ftdiftdi_device_desc "Dual RS232-HS"ftdi_vid_pid 0x0403 0x6010ftdi_layout_init 0x0008 0x001bftdi_layout_signal nSRST -oe 0x0020 -data 0x0020#Reset Stretcher logic on FE310 is ~1 second long#This doesn't apply if you use# ftdi_set_signal, but still good to document#adapter_nsrst_delay 1500set _CHIPNAME riscvjtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913set _TARGETNAME $_CHIPNAME.cputarget create $_TARGETNAME riscv -chain-position $_TARGETNAME$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAMEinit#reset -- This type of reset is not implemented yetif {[ info exists pulse_srst]} { ftdi_set_signal nSRST 0 ftdi_set_signal nSRST z #Wait for the reset stretcher #It will work without this, but #will incur lots of delays for later commands. sleep 1500} haltflash protect 0 64 last off