- 03 11月, 2022 2 次提交
-
-
由 Pauli Virtanen 提交于
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: NPauli Virtanen <pav@iki.fi> Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
由 Maxim Mikityanskiy 提交于
Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae9 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
- 02 11月, 2022 11 次提交
-
-
由 David S. Miller 提交于
Yang Yingliang says: ==================== two fixes for mISDN This patchset fixes two issues when device_add() returns error. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
The class is set in mISDN_register_device(), but if device_add() returns error, it will lead to delete a device without added, fix this by using device_is_registered() to check if the device is registered. Fixes: a900845e ("mISDN: Add support for Traverse Technologies NETJet PCI cards") Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Afer commit 1fa5ae85 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release(). Fixes: 1fa5ae85 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Qilong 提交于
The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068 ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @Default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) Fixes: 3c53cd65 ("rose: check NULL rose_loopback_neigh->loopback") Signed-off-by: NZhang Qilong <zhangqilong3@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Jakub reported that the addition of the "network_byte_order" member in struct nla_policy increases size of 32bit platforms. Instead of scraping the bit from elsewhere Johannes suggested to add explicit NLA_BE types instead, so do this here. NLA_POLICY_MAX_BE() macro is removed again, there is no need for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing. NLA_BE64 can be added later. Fixes: 08724ef6 ("netlink: introduce NLA_POLICY_MAX_BE") Reported-by: NJakub Kicinski <kuba@kernel.org> Suggested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Horatiu Vultur 提交于
When lan966x was receiving a frame, then it was building the skb and after that it was calling dma_unmap_single with frame size as the length. This actually has 2 issues: 1. It is using a length to map and a different length to unmap. 2. When the unmap was happening, the data was sync for cpu but it could be that this will overwrite what build_skb was initializing. The fix for these two problems is to change the order of operations. First to sync the frame for cpu, then to build the skb and in the end to unmap using the correct size but without sync the frame again for cpu. Fixes: c8349639 ("net: lan966x: Add FDMA functionality") Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
Horatiu Vultur says: ==================== net: lan966x: Fixes for when MTU is changed There were multiple problems in different parts of the driver when the MTU was changed. The first problem was that the HW was missing to configure the correct value, it was missing ETH_HLEN and ETH_FCS_LEN. The second problem was when vlan filtering was enabled/disabled, the MRU was not adjusted corretly. While the last issue was that the FDMA was calculated wrongly the correct maximum MTU. ==================== Link: https://lore.kernel.org/r/20221030213636.1031408-1-horatiu.vultur@microchip.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Horatiu Vultur 提交于
When MTU is changed, FDMA is required to calculate what is the maximum size of the frame that it can received. So it can calculate what is the page order needed to allocate for the received frames. The first problem was that, when the max MTU was calculated it was reading the value from dev and not from HW, so in this way it was missing L2 header + the FCS. The other problem was that once the skb is created using __build_skb_around, it would reserve some space for skb_shared_info. So if we received a frame which size is at the limit of the page order then the creating will failed because it would not have space to put all the data. Fixes: 2ea1cbac ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Horatiu Vultur 提交于
When vlan filtering is enabled/disabled, it is required to adjust the maximum received frame size that it can received. When vlan filtering is enabled, it would all to receive extra 4 bytes, that are the vlan tag. So the maximum frame size would be 1522 with a vlan tag. If vlan filtering is disabled then the maximum frame size would be 1518 regardless if there is or not a vlan tag. Fixes: 6d2c186a ("net: lan966x: Add vlan support.") Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Horatiu Vultur 提交于
When the MTU was changed, the lan966x didn't take in consideration the L2 header and the FCS. So the HW was configured with a smaller value than what was desired. Therefore the correct value to configure the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN. The vlan tag is not considered here, because at the time when the blamed commit was added, there was no vlan filtering support. The vlan fix will be part of the next patch. Fixes: d28d6d2e ("net: lan966x: add port module support") Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Christophe JAILLET 提交于
If an error occurs after the first kzalloc() the corresponding memory allocation is never freed. Add the missing kfree() in the error handling path, as already done in the remove() function. Fixes: 7e773594 ("sfc: Separate efx_nic memory from net_device memory") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NMartin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/dc114193121c52c8fa3779e49bdd99d4b41344a9.1667077009.git.christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 01 11月, 2022 2 次提交
-
-
由 Ziyang Xuan 提交于
Recently, we got two syzkaller problems because of oversize packet when napi frags enabled. One of the problems is because the first seg size of the iov_iter from user space is very big, it is 2147479538 which is bigger than the threshold value for bail out early in __alloc_pages(). And skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc reserves without __GFP_NOWARN flag. Thus we got a warning as following: ======================================================== WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 ... Call trace: __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 __alloc_pages_node include/linux/gfp.h:550 [inline] alloc_pages_node include/linux/gfp.h:564 [inline] kmalloc_large_node+0x94/0x350 mm/slub.c:4038 __kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545 __kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151 pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654 __skb_grow include/linux/skbuff.h:2779 [inline] tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477 tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835 tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036 The other problem is because odd IPv6 packets without NEXTHDR_NONE extension header and have big packet length, it is 2127925 which is bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in ipv6_gro_receive(), network_header offset and transport_header offset are all bigger than U16_MAX. That would trigger skb->network_header and skb->transport_header overflow error, because they are all '__u16' type. Eventually, it would affect the value for __skb_push(skb, value), and make it be a big value. After __skb_push() in ipv6_gro_receive(), skb->data would less than skb->head, an out of bounds memory bug occurred. That would trigger the problem as following: ================================================================== BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260 ... Call trace: dump_backtrace+0xd8/0x130 show_stack+0x1c/0x50 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0xbc/0x2e8 print_report+0x100/0x1e4 kasan_report+0x80/0x120 __asan_load8+0x78/0xa0 eth_type_trans+0x100/0x260 napi_gro_frags+0x164/0x550 tun_get_user+0xda4/0x1270 tun_chr_write_iter+0x74/0x130 do_iter_readv_writev+0x130/0x1ec do_iter_write+0xbc/0x1e0 vfs_writev+0x13c/0x26c To fix the problems, restrict the packet size less than (ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved skb space in napi_alloc_skb() because transport_header is an offset from skb->head. Add len check in tun_napi_alloc_frags() simply. Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Rick Lindsley 提交于
Changed maintainers for vnic driver, since Dany has new responsibilities. Also added Nick Child as reviewer. Signed-off-by: NRick Lindsley <ricklind@us.ibm.com> Link: https://lore.kernel.org/r/20221028203509.4070154-1-ricklind@us.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 31 10月, 2022 7 次提交
-
-
由 Dan Carpenter 提交于
We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d ("sch_sfb: Also store skb len before calling child enqueue"). Fixes: d7f4f332 ("sch_red: update backlog as well") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Changzhong 提交于
The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails. Fixes: 79f33912 ("net: fec: Add software TSO support") Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Shang XiaoJing says: ==================== nfc: Fix potential memory leak of skb There are 6 kinds of send functions can be called by nci_send_frame(): virtual_nci_send(), fdp_nci_send(), nxp_nci_send(), s3fwrn5_nci_send(), nfcmrvl_nci_send(), st_nci_send(); 1. virtual_nci_send() will memleak the skb, and has been fixed before. 2. fdp_nci_send() won't free the skb no matter whether write() succeed. 3-4. nxp_nci_send() and s3fwrn5_nci_send() will only free the skb when write() failed, however write() will not free the skb by itself for when succeeds. 5. nfcmrvl_nci_send() will call nfcmrvl_XXX_nci_send(), where some of them will free the skb, but nfcmrvl_i2c_nci_send() only free the skb when i2c_master_send() return >=0, and memleak will happen when i2c_master_send() failed in nfcmrvl_i2c_nci_send(). 6. st_nci_send() will queue the skb into other list and finally be freed. Fix the potential memory leak of skb. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shang XiaoJing 提交于
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() will only free skb when i2c_master_send() return >=0, which means skb will memleak when i2c_master_send() failed. Free skb no matter whether i2c_master_send() succeeds. Fixes: b5b3e23e ("NFC: nfcmrvl: add i2c driver") Signed-off-by: NShang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shang XiaoJing 提交于
s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(), and free the skb if write() failed. However, even if the write() run succeeds, the skb will not be freed in write(). As the result, the skb will memleak. s3fwrn5_nci_send() should also free the skb when write() succeeds. Fixes: c04c674f ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: NShang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shang XiaoJing 提交于
nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write() run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the result, the skb will memleak. nxp_nci_send() should also free the skb when nxp_nci_i2c_write() succeeds. Fixes: dece4585 ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by: NShang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shang XiaoJing 提交于
fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in the function. As a result, when fdp_nci_i2c_write() finished, the skb will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write() finished. Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: NShang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2022 10 次提交
-
-
由 Vladimir Oltean 提交于
DSA tagging protocol drivers can be changed at runtime through sysfs and at probe time through the device tree (support for the latter was added later). When changing through sysfs, it is assumed that the module for the new tagging protocol was already loaded into the kernel (in fact this is only a concern for Ocelot/Felix switches, where we have tag_ocelot.ko and tag_ocelot_8021q.ko; for every other switch, the default and alternative protocols are compiled within the same .ko, so there is nothing for the user to load). The kernel cannot currently call request_module(), because it has no way of constructing the modalias name of the tagging protocol driver ("dsa_tag-%d", where the number is one of DSA_TAG_PROTO_*_VALUE). The device tree only contains the string name of the tagging protocol ("ocelot-8021q"), and the only mapping between the string and the DSA_TAG_PROTO_OCELOT_8021Q_VALUE is present in tag_ocelot_8021q.ko. So this is a chicken-and-egg situation and dsa_core.ko has nothing based on which it can automatically request the insertion of the module. As a consequence, if CONFIG_NET_DSA_TAG_OCELOT_8021Q is built as module, the switch will forever defer probing. The long-term solution is to make DSA call request_module() somehow, but that probably needs some refactoring. What we can do to keep operating with existing device tree blobs is to cancel the attempt to change the tagging protocol with the one specified there, and to remain operating with the default one. Depending on the situation, the default protocol might still allow some functionality (in the case of ocelot, it does), and it's better to have that than to fail to probe. Fixes: deff7107 ("net: dsa: Allow default tag protocol to be overridden from DT") Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/Reported-by: NHeiko Thiery <heiko.thiery@gmail.com> Reported-by: NMichael Walle <michael@walle.cc> Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Tested-by: NMichael Walle <michael@walle.cc> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221027145439.3086017-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Alexandru Tachici 提交于
ADIN1110 was registering netdev_notifiers on each device probe. This leads to warnings/probe failures because of double registration of the same notifier when to adin1110/2111 devices are connected to the same system. Move the registration of netdev_notifiers in module init call, in this way multiple driver instances can use the same notifiers. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: NAlexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20221027095655.89890-2-alexandru.tachici@analog.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
Pavel Begunkov says: ==================== a few corrections for SOCK_SUPPORT_ZC There are several places/cases that got overlooked in regards to SOCK_SUPPORT_ZC. We're lacking the flag for IPv6 UDP sockets and accepted TCP sockets. We also should clear the flag when someone tries to hijack a socket by replacing the ->sk_prot callbacks. ==================== Link: https://lore.kernel.org/r/cover.1666825799.git.asml.silence@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Stefan Metzmacher 提交于
Without this only the client initiated tcp sockets have SOCK_SUPPORT_ZC. The listening socket on the server also has it, but the accepted connections didn't, which meant IORING_OP_SEND[MSG]_ZC will always fails with -EOPNOTSUPP. Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy") Cc: <stable@vger.kernel.org> # 6.0 CC: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/io-uring/20221024141503.22b4e251@kernel.org/T/#m38aa19b0b825758fb97860a38ad13122051f9ddaSigned-off-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Pavel Begunkov 提交于
Remove SOCK_SUPPORT_ZC when we're setting ulp as it might not support msghdr::ubuf_info, e.g. like TLS replacing ->sk_prot with a new set of handlers. Cc: <stable@vger.kernel.org> # 6.0 Reported-by: NJakub Kicinski <kuba@kernel.org> Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Pavel Begunkov 提交于
sockmap replaces ->sk_prot with its own callbacks, we should remove SOCK_SUPPORT_ZC as the new proto doesn't support msghdr::ubuf_info. Cc: <stable@vger.kernel.org> # 6.0 Reported-by: NJakub Kicinski <kuba@kernel.org> Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Pavel Begunkov 提交于
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from udp6_init_sock(), but d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...") removed it and so ipv6 udp misses the flag. Cc: <stable@vger.kernel.org> # 6.0 Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
Update enic maintainers. Signed-off-by: NGovindarajulu Varadarajan <govind.varadar@gmail.com> Link: https://lore.kernel.org/r/20221028042159.735670-1-govind.varadar@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
I missed one of the families in OvS when annotating .resv_start_op. This triggers the warning added in commit ce48ebdd ("genetlink: limit the use of validation workarounds to old ops"). Reported-by: syzbot+40eb8c0447c0e47a7e9b@syzkaller.appspotmail.com Fixes: 9c5d03d3 ("genetlink: start to validate reserved header bytes") Link: https://lore.kernel.org/r/20221028032501.2724270-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
Mark the validation fields as private, users shouldn't set them directly and they are too complicated to explain in a more succinct way (there's already a long explanation in the comment above). The strict_start_type field is set directly and has a dedicated comment so move that above the "private" section. Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 28 10月, 2022 8 次提交
-
-
由 Radhey Shyam Pandey 提交于
Instead of generic description, mention what reset_lock actually protects i.e. lock to serialize xmit and tx_timeout execution. Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Zhongjin 提交于
kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. Fixes: 98cd1552 ("net: dsa: Mock-up driver") Signed-off-by: NChen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from Jakub Kicinski: "Including fixes from 802.15.4 (Zigbee et al). Current release - regressions: - ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1 Current release - new code bugs: - mptcp: fix abba deadlock on fastopen - eth: stmmac: rk3588: allow multiple gmac controllers in one system Previous releases - regressions: - ip: rework the fix for dflt addr selection for connected nexthop - net: couple more fixes for misinterpreting bits in struct page after the signature was added Previous releases - always broken: - ipv6: ensure sane device mtu in tunnels - openvswitch: switch from WARN to pr_warn on a user-triggerable path - ethtool: eeprom: fix null-deref on genl_info in dump - ieee802154: more return code fixes for corner cases in dgram_sendmsg - mac802154: fix link-quality-indicator recording - eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack offload - eth: fec: limit register access on i.MX6UL - eth: bcm4908_enet: update TX stats after actual transmission - can: rcar_canfd: improve IRQ handling for RZ/G2L Misc: - genetlink: piggy back on the newly added resv_op_start to enforce more sanity checks on new commands" * tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) net: enetc: survive memory pressure without crashing kcm: do not sense pfmemalloc status in kcm_sendpage() net: do not sense pfmemalloc status in skb_append_pagefrags() net/mlx5e: Fix macsec sci endianness at rx sa update net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function net/mlx5e: Fix macsec rx security association (SA) update/delete net/mlx5e: Fix macsec coverity issue at rx sa update net/mlx5: Fix crash during sync firmware reset net/mlx5: Update fw fatal reporter state on PCI handlers successful recover net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed net/mlx5e: TC, Reject forwarding from internal port to internal port net/mlx5: Fix possible use-after-free in async command interface net/mlx5: ASO, Create the ASO SQ with the correct timestamp format net/mlx5e: Update restore chain id for slow path packets net/mlx5e: Extend SKB room check to include PTP-SQ net/mlx5: DR, Fix matcher disconnect error flow net/mlx5: Wait for firmware to enable CRS before pci_restore_state net/mlx5e: Do not increment ESN when updating IPsec ESN state netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull execve fixes from Kees Cook: - Fix an ancient signal action copy race (Bernd Edlinger) - Fix a memory leak in ELF loader, when under memory pressure (Li Zetao) * tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fs/binfmt_elf: Fix memory leak in load_elf_binary() exec: Copy oldsighand->action under spin-lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull hardening fixes from Kees Cook: - Fix older Clang vs recent overflow KUnit test additions (Nick Desaulniers, Kees Cook) - Fix kern-doc visibility for overflow helpers (Kees Cook) * tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: overflow: Refactor test skips for Clang-specific issues overflow: disable failing tests for older clang versions overflow: Fix kern-doc markup for functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A bunch of patches addressing issues in the vivid driver and adding new checks in V4L2 to validate the input parameters from some ioctls" * tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vivid.rst: loop_video is set on the capture devnode media: vivid: set num_in/outputs to 0 if not supported media: vivid: drop GFP_DMA32 media: vivid: fix control handler mutex deadlock media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced' media: v4l2-dv-timings: add sanity checks for blanking values media: vivid: dev->bitmap_cap wasn't freed in all cases media: vivid: s_fbuf: add more sanity checks
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt由 Linus Torvalds 提交于
Pull fscrypt fix from Eric Biggers: "Fix a memory leak that was introduced by a change that went into -rc1" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: fix keyring memory leak on mount failure
-
由 Vladimir Oltean 提交于
Under memory pressure, enetc_refill_rx_ring() may fail, and when called during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not checked for. An extreme case of memory pressure will result in exactly zero buffers being allocated for the RX ring, and in such a case it is expected that hardware drops all RX packets due to lack of buffers. This does not happen, because the reset-default value of the consumer and produces index is 0, and this makes the ENETC think that all buffers have been initialized and that it owns them (when in reality none were). The hardware guide explains this best: | Configure the receive ring producer index register RBaPIR with a value | of 0. The producer index is initially configured by software but owned | by hardware after the ring has been enabled. Hardware increments the | index when a frame is received which may consume one or more BDs. | Hardware is not allowed to increment the producer index to match the | consumer index since it is used to indicate an empty condition. The ring | can hold at most RBLENR[LENGTH]-1 received BDs. | | Configure the receive ring consumer index register RBaCIR. The | consumer index is owned by software and updated during operation of the | of the BD ring by software, to indicate that any receive data occupied | in the BD has been processed and it has been prepared for new data. | - If consumer index and producer index are initialized to the same | value, it indicates that all BDs in the ring have been prepared and | hardware owns all of the entries. | - If consumer index is initialized to producer index plus N, it would | indicate N BDs have been prepared. Note that hardware cannot start if | only a single buffer is prepared due to the restrictions described in | (2). | - Software may write consumer index to match producer index anytime | while the ring is operational to indicate all received BDs prior have | been processed and new BDs prepared for hardware. Normally, the value of rx_ring->rcir (consumer index) is brought in sync with the rx_ring->next_to_use software index, but this only happens if page allocation ever succeeded. When PI==CI==0, the hardware appears to receive frames and write them to DMA address 0x0 (?!), then set the READY bit in the BD. The enetc_clean_rx_ring() function (and its XDP derivative) is naturally not prepared to handle such a condition. It will attempt to process those frames using the rx_swbd structure associated with index i of the RX ring, but that structure is not fully initialized (enetc_new_page() does all of that). So what happens next is undefined behavior. To operate using no buffer, we must initialize the CI to PI + 1, which will block the hardware from advancing the CI any further, and drop everything. The issue was seen while adding support for zero-copy AF_XDP sockets, where buffer memory comes from user space, which can even decide to supply no buffers at all (example: "xdpsock --txonly"). However, the bug is present also with the network stack code, even though it would take a very determined person to trigger a page allocation failure at the perfect time (a series of ifup/ifdown under memory pressure should eventually reproduce it given enough retries). Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-