- 08 11月, 2022 4 次提交
-
-
由 YueHaibing 提交于
While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m, kconfig warning and build errors: WARNING: unmet direct dependencies detected for BROADCOM_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y] drivers/net/phy/broadcom.o: In function `bcm54xx_suspend': broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop' drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe': broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe' drivers/net/phy/broadcom.o: In function `bcm54xx_config_init': broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init' Fixes: 99addbe3 ("net: broadcom: Select BROADCOM_PHY for BCMGENET") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NFlorian Fainelli <f.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Yang Yingliang 提交于
If CONFIG_MACSEC=m and CONFIG_OCTEONTX2_PF=y, it leads a build error: ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_pfaf_mbox_up_handler': otx2_pf.c:(.text+0x181c): undefined reference to `cn10k_handle_mcs_event' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_probe': otx2_pf.c:(.text+0x437e): undefined reference to `cn10k_mcs_init' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove': otx2_pf.c:(.text+0x5031): undefined reference to `cn10k_mcs_free' ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify': otx2_pf.c:(.text+0x5f11): undefined reference to `cn10k_handle_mcs_event' Make CONFIG_OCTEONTX2_PF depends on CONFIG_MACSEC to fix it. Because it has empty stub functions of cn10k, CONFIG_OCTEONTX2_PF can be enabled if CONFIG_MACSEC is disabled Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221105063442.2013981-1-yangyingliang@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Miquel Raynal 提交于
While working on the nvmem description I figured out this file had the "nvmem-cell-names" property name misspelled. Fix the typo, as "nvmem-cells-names" has never existed. Fixes: 603094b2 ("dt-bindings: net: Add tsnep Ethernet controller") Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: NGerhard Engleder <gerhard@engleder-embedded.com> Acked-by: NRob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221104162147.1288230-1-miquel.raynal@bootlin.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Rasmus Villemoes 提交于
There are two problems with meson8b_devm_clk_prepare_enable(), introduced in commit a54dc4a4 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable"): - It doesn't pass the clk argument, but instead always the rgmii_tx_clk of the device. - It silently ignores the return value of devm_add_action_or_reset(). The former didn't become an actual bug until another user showed up in the next commit 9308c476 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration"). The latter means the callers could end up with the clock not actually prepared/enabled. Fixes: a54dc4a4 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable") Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dkSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 07 11月, 2022 7 次提交
-
-
由 Alexander Potapenko 提交于
When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized. Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: NAlexander Potapenko <glider@google.com> Reviewed-by: NDavid Ahern <dsahern@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lu Wei 提交于
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code of TCPOPT_SACK_PERM is called to enable sack after data is sent and dupacks are received , it will trigger a warning in function tcp_verify_left_out() as follows: ============================================ WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132 tcp_timeout_mark_lost+0x154/0x160 tcp_enter_loss+0x2b/0x290 tcp_retransmit_timer+0x50b/0x640 tcp_write_timer_handler+0x1c8/0x340 tcp_write_timer+0xe5/0x140 call_timer_fn+0x3a/0x1b0 __run_timers.part.0+0x1bf/0x2d0 run_timer_softirq+0x43/0xb0 __do_softirq+0xfd/0x373 __irq_exit_rcu+0xf6/0x140 The warning is caused in the following steps: 1. a socket named socketA is created 2. socketA enters repair mode without build a connection 3. socketA calls connect() and its state is changed to TCP_ESTABLISHED directly 4. socketA leaves repair mode 5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup ack receives) increase 6. socketA enters repair mode again 7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack 8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out increases 9. sack_outs + lost_out > packets_out triggers since lost_out and sack_outs increase repeatly In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if Step7 not happen and the warning will not be triggered. As suggested by Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was already sent. socket-tcp tests in CRIU has been tested as follows: $ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \ --ignore-taint socket-tcp* represent all socket-tcp tests in test/zdtm/static/. Fixes: b139ba4e ("tcp: Repair connection-time negotiated parameters") Signed-off-by: NLu Wei <luwei32@huawei.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhaoping Shu 提交于
These WWAN network interface operations (create/delete/open/close) are already protected by RTNL lock, i.e., wwan_ops.newlink(), wwan_ops.dellink(), net_device_ops.ndo_open() and net_device.ndo_stop() are called with RTNL lock held. Therefore, this patch removes the unnecessary if_mutex. Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 HW He 提交于
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: aa730a99 ("net: wwan: Add MHI MBIM network driver") Signed-off-by: NHW He <hw.he@mediatek.com> Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 HW He 提交于
IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: 2a54f2c7 ("net: iosm: net driver") Signed-off-by: NHW He <hw.he@mediatek.com> Reviewed-by: NLoic Poulain <loic.poulain@linaro.org> Signed-off-by: NZhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhengchao Shao 提交于
When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhengchao Shao 提交于
When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2022 6 次提交
-
-
由 Sean Anderson 提交于
When the mac device gets removed, it leaves behind the ethernet device. This will result in a segfault next time the ethernet device accesses mac_dev. Remove the ethernet device when we get removed to prevent this. This is not completely reversible, since some resources aren't cleaned up properly, but that can be addressed later. Fixes: 39339616 ("fsl/fman: Add FMan MAC driver") Signed-off-by: NSean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
Michael Chan says: ==================== bnxt_en: Bug fixes This bug fix series includes fixes for PCIE AER, a crash that may occur when doing ethtool -C in the middle of error recovery, and aRFS. ==================== Link: https://lore.kernel.org/r/1667518407-15761-1-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Alex Barba 提交于
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: NAkshay Navgire <anavgire@purestorage.com> Signed-off-by: NAlex Barba <alex.barba@broadcom.com> Signed-off-by: NAndy Gospodarek <gospo@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Michael Chan 提交于
During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe08 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Vikas Gupta 提交于
Fix the sequence required for PCIE-AER. While slot reset occurs, firmware might not be ready and the driver needs to check for its recovery. We also need to remap the health registers for some chips and clear the resource reservations. The resources will be allocated again during bnxt_io_resume(). Fixes: fb1e6e56 ("bnxt_en: Fix AER recovery.") Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Vikas Gupta 提交于
Introduce bnxt_clear_reservations() to clear the reserved attributes only. This will be used in the next patch to fix PCI AER handling. Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 04 11月, 2022 19 次提交
-
-
由 Wang Yufen 提交于
kmemleak reports after running test_progs: unreferenced object 0xffff8881b1672dc0 (size 232): comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s) hex dump (first 32 bytes): e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g..... 00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace: [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150 [<0000000041c7fc09>] __napi_build_skb+0x15/0x50 [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540 [<000000003ecfa30e>] napi_get_frags+0x59/0x140 [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun] [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun] [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320 [<000000008f338ea2>] do_iter_write+0x135/0x630 [<000000008a3377a4>] vfs_writev+0x12e/0x440 [<00000000a6b5639a>] do_writev+0x104/0x280 [<00000000ccf065d8>] do_syscall_64+0x3b/0x90 [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: tun_get_user() napi_gro_frags() napi_frags_finish() case GRO_NORMAL: gro_normal_one() list_add_tail(&skb->list, &napi->rx_list); <-- While napi->rx_count < READ_ONCE(gro_normal_batch), <-- gro_normal_list() is not called, napi->rx_list is not empty <-- not ask to complete the gro work, will cause memory leaks in <-- following tun_napi_del() ... tun_napi_del() netif_napi_del() __netif_napi_del() <-- &napi->rx_list is not empty, which caused memory leaks To fix, add napi_complete() after napi_gro_frags(). Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: NWang Yufen <wangyufen@huawei.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ratheesh Kannoth 提交于
In scenarios where multiple errors have occurred for a SQ before SW starts handling error interrupt, SQ_CTX[OP_INT] may get overwritten leading to NIX_LF_SQ_OP_INT returning incorrect value. To workaround this read LMT, MNQ and SQ individual error status registers to determine the cause of error. Fixes: 4ff7d148 ("octeontx2-pf: Error handling support") Signed-off-by: NRatheesh Kannoth <rkannoth@marvell.com> Reviewed-by: NSunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roger Quadros 提交于
Move am65_cpsw_nuss_phylink_cleanup() call to after am65_cpsw_nuss_cleanup_ndev() so phylink is still valid to prevent the below Segmentation fault on module remove when first slave link is up. [ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4 [ 31.684627] Mem abort info: [ 31.687446] ESR = 0x0000000096000004 [ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.720663] SET = 0, FnV = 0 [ 31.723729] EA = 0, S1PTW = 0 [ 31.740617] FSC = 0x04: level 0 translation fault [ 31.756624] Data abort info: [ 31.759508] ISV = 0, ISS = 0x00000004 [ 31.776705] CM = 0, WnR = 0 [ 31.779695] [00040008000005f4] address between user and kernel address ranges [ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6 [ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160 [ 31.837547] Hardware name: Texas Instruments AM625 (DT) [ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.849709] pc : phy_stop+0x18/0xf8 [ 31.853202] lr : phylink_stop+0x38/0xf8 [ 31.857031] sp : ffff80000a0839f0 [ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000 [ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98 [ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90 [ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000 [ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106 [ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000 [ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0 [ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0 [ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920 [ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200 [ 31.931603] Call trace: [ 31.934042] phy_stop+0x18/0xf8 [ 31.937177] phylink_stop+0x38/0xf8 [ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss] [ 31.947452] __dev_close_many+0xa4/0x140 [ 31.951371] dev_close_many+0x84/0x128 [ 31.955115] unregister_netdevice_many+0x130/0x6d0 [ 31.959897] unregister_netdevice_queue+0x94/0xd8 [ 31.964591] unregister_netdev+0x24/0x38 [ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss] [ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss] Cc: <Stable@vger.kernel.org> # v5.18+ Fixes: e8609e69 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Signed-off-by: NRoger Quadros <rogerq@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sabrina Dubroca says: ==================== macsec: offload-related fixes I'm working on a dummy offload for macsec on netdevsim. It just has a small SecY and RXSC table so I can trigger failures easily on the ndo_* side. It has exposed a couple of issues. The first patch is a revert of commit c850240b ("net: macsec: report real_dev features when HW offloading is enabled"). That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. I'm working on re-adding those feature flags when offload is available, but I haven't fully solved that yet. I think it would be safer to do that second part in net-next considering how complex feature interactions tend to be. v2: - better describe the issue introduced by commit c850240b (Leon Romanovsky) - patch #3: drop unnecessary !! (Leon Romanovsky) v3: - patch #3: drop extra newline (Jakub Kicinski) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NAntoine Tenart <atenart@kernel.org> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
macsec_is_configured incorrectly uses secy->n_rx_sc to check if some RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but there can also be inactive SCs as well, which may be stored in the driver (in case we're disabling offloading), or would have to be pushed to the device (in case we're trying to enable offloading). As long as RXSCs active on creation and never turned off, the issue is not visible. Fixes: dcb780fb ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NAntoine Tenart <atenart@kernel.org> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NAntoine Tenart <atenart@kernel.org> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Currently we get an inconsistent state: - netlink returns the error to userspace - the RXSC is installed but not offloaded Then the device could get confused when we try to add an RXSA, because the RXSC isn't supposed to exist. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NAntoine Tenart <atenart@kernel.org> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
This reverts commit c850240b. That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP) were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. Example perf trace when running ip link add link eni1np1 type macsec port 4 offload mac ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869 xfrm_dev_event+0x3a notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD) notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a dev->features includes NETIF_F_HW_ESP (0x04000000000000), so xfrm_api_check returns NOTIFY_BAD because we don't have dev->xfrmdev_ops on the macsec device. We could probably propagate GSO and a few other features from the lower device, similar to macvlan. This will be done in a future patch. Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NAntoine Tenart <atenart@kernel.org> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrien Thierry 提交于
In some conditions, background processes in udpgro don't have enough time to set up the sockets. When foreground processes start, this results in the test failing with "./udpgso_bench_tx: sendmsg: Connection refused". For instance, this happens from time to time on a Qualcomm SA8540P SoC running CentOS Stream 9. To fix this, increase the time given to background processes to complete the startup before foreground processes start. Signed-off-by: NAdrien Thierry <athierry@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guangbin Huang 提交于
As the argument struct hnae3_handle *h of function hclge_get_dscp_prio() can be other client registered in hnae3 layer, we need to transform it into hnae3_handle of local nic client to get right dscp settings for other clients. Fixes: dfea275e ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()") Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix build errors when MACSEC=m and OCTEONTX2_PF=y by having OCTEONTX2_PF depend on MACSEC if it is enabled. By adding "|| !MACSEC", this means that MACSEC is not required -- it can be disabled for this driver. drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove': ../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x2fd0): undefined reference to `cn10k_mcs_free' mips64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify': ../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x4610): undefined reference to `cn10k_handle_mcs_event' Reported-by: Nkernel test robot <lkp@intel.com> Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Subbaraya Sundeep <sbhatta@marvell.com> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Geetha sowjanya <gakula@marvell.com> Cc: hariprasad <hkelam@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless由 Jakub Kicinski 提交于
Kalle Valo says: ==================== wireless fixes for v6.1 Second set of fixes for v6.1. Some fixes to char type usage in drivers, memory leaks in the stack and also functionality fixes. The rt2x00 char type fix is a larger (but still simple) commit, otherwise the fixes are small in size. * tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update() wifi: ath11k: Fix QCN9074 firmware boot on x86 wifi: mac80211: Set TWT Information Frame Disabled bit as 1 wifi: mac80211: Fix ack frame idr leak when mesh has no route wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker() wifi: airo: do not assign -1 to unsigned char wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support wifi: cfg80211: Fix bitrates overflow issue wifi: cfg80211: fix memory leak in query_regdb_file() wifi: mac80211: fix memory free error when registering wiphy fail wifi: cfg80211: silence a sparse RCU warning wifi: rt2x00: use explicitly signed or unsigned types ==================== Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jiri Benc 提交于
Since commit 3dcbdb13 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list"), it is allowed to change gso_size of a GRO packet. However, that commit assumes that "checking the first list_skb member suffices; i.e if either of the list_skb members have non head_frag head, then the first one has too". It turns out this assumption does not hold. We've seen BUG_ON being hit in skb_segment when skbs on the frag_list had differing head_frag with the vmxnet3 driver. This happens because __netdev_alloc_skb and __napi_alloc_skb can return a skb that is page backed or kmalloced depending on the requested size. As the result, the last small skb in the GRO packet can be kmalloced. There are three different locations where this can be fixed: (1) We could check head_frag in GRO and not allow GROing skbs with different head_frag. However, that would lead to performance regression on normal forward paths with unmodified gso_size, where !head_frag in the last packet is not a problem. (2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating that NETIF_F_SG is undesirable. That would need to eat a bit in sk_buff. Furthermore, that flag can be unset when all skbs on the frag_list are page backed. To retain good performance, bpf_skb_net_grow/shrink would have to walk the frag_list. (3) Walk the frag_list in skb_segment when determining whether NETIF_F_SG should be cleared. This of course slows things down. This patch implements (3). To limit the performance impact in skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set that have gso_size changed. Normal paths thus will not hit it. We could check only the last skb but since we need to walk the whole list anyway, let's stay on the safe side. Fixes: 3dcbdb13 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") Signed-off-by: NJiri Benc <jbenc@redhat.com> Reviewed-by: NWillem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/e04426a6a91baf4d1081e1b478c82b5de25fdf21.1667407944.git.jbenc@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 Jakub Kicinski 提交于
Daniel Borkmann says: ==================== bpf 2022-11-04 We've added 8 non-merge commits during the last 3 day(s) which contain a total of 10 files changed, 113 insertions(+), 16 deletions(-). The main changes are: 1) Fix memory leak upon allocation failure in BPF verifier's stack state tracking, from Kees Cook. 2) Fix address leakage when BPF progs release reference to an object, from Youlin Li. 3) Fix BPF CI breakage from buggy in.h uapi header dependency, from Andrii Nakryiko. 4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui. 5) Fix BPF sockmap lockdep warning by cancelling psock work outside of socket lock, from Cong Wang. 6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting, from Wang Yufen. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add verifier test for release_reference() bpf: Fix wrong reg type conversion in release_reference() bpf, sock_map: Move cancel_work_sync() out of sock lock tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI net/ipv4: Fix linux/in.h header dependencies bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues bpf, verifier: Fix memory leak in array reallocation for stack state ==================== Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Youlin Li 提交于
Add a test case to ensure that released pointer registers will not be leaked into the map. Before fix: ./test_verifier 984 984/u reference tracking: try to leak released ptr reg FAIL Unexpected success to load! verification time 67 usec stack depth 4 processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 984/p reference tracking: try to leak released ptr reg OK Summary: 1 PASSED, 0 SKIPPED, 1 FAILED After fix: ./test_verifier 984 984/u reference tracking: try to leak released ptr reg OK 984/p reference tracking: try to leak released ptr reg OK Summary: 2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: NYoulin Li <liulin063@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com
-
由 Youlin Li 提交于
Some helper functions will allocate memory. To avoid memory leaks, the verifier requires the eBPF program to release these memories by calling the corresponding helper functions. When a resource is released, all pointer registers corresponding to the resource should be invalidated. The verifier use release_references() to do this job, by apply __mark_reg_unknown() to each relevant register. It will give these registers the type of SCALAR_VALUE. A register that will contain a pointer value at runtime, but of type SCALAR_VALUE, which may allow the unprivileged user to get a kernel pointer by storing this register into a map. Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this problem. Fixes: fd978bf7 ("bpf: Add reference tracking to verifier") Signed-off-by: NYoulin Li <liulin063@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and netfilter. Current release - regressions: - net: several zerocopy flags fixes - netfilter: fix possible memory leak in nf_nat_init() - openvswitch: add missing .resv_start_op Previous releases - regressions: - neigh: fix null-ptr-deref in neigh_table_clear() - sched: fix use after free in red_enqueue() - dsa: fall back to default tagger if we can't load the one from DT - bluetooth: fix use-after-free in l2cap_conn_del() Previous releases - always broken: - netfilter: netlink notifier might race to release objects - nfc: fix potential memory leak of skb - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu - bluetooth: use skb_put to set length - eth: tun: fix bugs for oversize packet when napi frags enabled - eth: lan966x: fixes for when MTU is changed - eth: dwmac-loongson: fix invalid mdio_node" * tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) vsock: fix possible infinite sleep in vsock_connectible_wait_data() vsock: remove the unused 'wait' in vsock_connectible_recvmsg() ipv6: fix WARNING in ip6_route_net_exit_late() bridge: Fix flushing of dynamic FDB entries net, neigh: Fix null-ptr-deref in neigh_table_clear() net/smc: Fix possible leaked pernet namespace in smc_init() stmmac: dwmac-loongson: fix invalid mdio_node ibmvnic: Free rwi on reset success net: mdio: fix undefined behavior in bit shift for __mdiobus_register Bluetooth: L2CAP: Fix attempting to access uninitialized memory Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect Bluetooth: L2CAP: Fix memory leak in vhci_write Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() Bluetooth: virtio_bt: Use skb_put to set length Bluetooth: hci_conn: Fix CIS connection dst_type handling Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu netfilter: ipset: enforce documented limit to prevent allocating huge memory isdn: mISDN: netjet: fix wrong check of device registration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Fix an endian thinko in the asm-generic compat_arg_u64() which led to syscall arguments being swapped for some compat syscalls. - Fix syscall wrapper handling of syscalls with 64-bit arguments on 32-bit kernels, which led to syscall arguments being misplaced. - A build fix for amdgpu on Book3E with AltiVec disabled. Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann. * tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Select ARCH_SPLIT_ARG64 powerpc/32: fix syscall wrappers with 64-bit arguments asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual() powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
-
- 03 11月, 2022 4 次提交
-
-
由 Cong Wang 提交于
Stanislav reported a lockdep warning, which is caused by the cancel_work_sync() called inside sock_map_close(), as analyzed below by Jakub: psock->work.func = sk_psock_backlog() ACQUIRE psock->work_mutex sk_psock_handle_skb() skb_send_sock() __skb_send_sock() sendpage_unlocked() kernel_sendpage() sock->ops->sendpage = inet_sendpage() sk->sk_prot->sendpage = tcp_sendpage() ACQUIRE sk->sk_lock tcp_sendpage_locked() RELEASE sk->sk_lock RELEASE psock->work_mutex sock_map_close() ACQUIRE sk->sk_lock sk_psock_stop() sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED) cancel_work_sync() __cancel_work_timer() __flush_work() // wait for psock->work to finish RELEASE sk->sk_lock We can move the cancel_work_sync() out of the sock lock protection, but still before saved_close() was called. Fixes: 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") Reported-by: NStanislav Fomichev <sdf@google.com> Signed-off-by: NCong Wang <cong.wang@bytedance.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Tested-by: NJakub Sitnicki <jakub@cloudflare.com> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NJakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com
-
由 Andrii Nakryiko 提交于
With recent sync of linux/in.h tools/include headers are now relying on __DECLARE_FLEX_ARRAY macro, which isn't itself defined inside tools/include headers anywhere and is instead assumed to be present in system-wide UAPI header. This breaks isolated environments that don't have kernel UAPI headers installed system-wide, like BPF CI ([0]). To fix this, bring in include/uapi/linux/stddef.h into tools/include. We can't just copy/paste it, though, it has to be processed with scripts/headers_install.sh, which has a dependency on scripts/unifdef. So the full command to (re-)generate stddef.h for inclusion into tools/include directory is: $ make scripts_unifdef && \ cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \ scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds. [0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609 Fixes: 036b8f5b ("tools headers uapi: Update linux/in.h copy") Signed-off-by: NAndrii Nakryiko <andrii@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org
-
由 Andrii Nakryiko 提交于
__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but doesn't seem to be explicitly included from include/uapi/linux/in.h, which breaks BPF selftests builds (once we sync linux/stddef.h into tools/include directory in the next patch). Fix this by explicitly including linux/stddef.h. Given this affects BPF CI and bpf tree, targeting this for bpf tree. Fixes: 5854a09b ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper") Signed-off-by: NAndrii Nakryiko <andrii@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org
-
由 Paolo Abeni 提交于
Dexuan Cui says: ==================== vsock: remove an unused variable and fix infinite sleep Patch 1 removes the unused 'wait' variable. Patch 2 fixes an infinite sleep issue reported by a hv_sock user. ==================== Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
-