- 14 4月, 2010 6 次提交
-
-
由 Tom Zanussi 提交于
Bypasses the attr perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Making the attrs into events allows them to be streamed over a pipe along with the rest of the header data (in later patches). It also paves the way to allowing events to be added and removed from perf sessions dynamically. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Adds special treatment for stdin - if the user specifies '-i -' to perf trace, the intent is that the event stream be read from stdin rather than from a disk file. The actual handling of the '-' filename is done by the session; this just adds a signal handler to stop reporting, and turns off interference by the pager. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-5-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Adds special treatment for stdin - if the user specifies '-i -' to perf report, the intent is that the event stream be written to stdin rather than from a disk file. The actual handling of the '-' filename is done by the session; this just adds a signal handler to stop reporting, and turns off interference by the pager. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-4-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Adds special treatment for stdout - if the user specifies '-o -' to perf record, the intent is that the event stream be written to stdout rather than to a disk file. Also, redirect stdout of forked child to stderr - in pipe mode, stdout of the forked child interferes with the stdout perf stream, so redirect it to stderr where it can still be seen but won't be mixed in with the perf output. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-3-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
This patch makes several changes to allow the perf event stream to be sent and received over a pipe: - adds pipe-specific versions of the header read/write code - adds pipe-specific version of the event processing code - adds a range of event types to be used for header or other pseudo events, above the range used by the kernel - checks the return value of event handlers, which they can use to skip over large events during event processing rather than actually reading them into event objects. - unifies the multiple do_read() functions and updates its users. Note that none of these changes affect the existing perf data file format or processing - this code only comes into play if perf output is sent to stdout (or is read from stdin). Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-2-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ian Munsie 提交于
Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: NIan Munsie <imunsie@au.ibm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 4月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We need to create the $O/scripts/perl/Perf-Trace-Util/ directory too. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 08 4月, 2010 19 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
That is not used in perf where we have the LOST events. Without this patch we get: [root@doppio ~]# perf lock report | head -3 Warning: Error: expected 'data' but read 'overwrite' So, to make the same perf command work with kernels with and without this field, introduce variants for the parsing routines to not warn the user in such case. Discussed-with: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Randy Dunlap 提交于
Correct typos in perf bench & perf sched help text. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>, Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20100331113100.cc898487.randy.dunlap@oracle.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
-
由 Randy Dunlap 提交于
Fix spello in user message. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>, Cc: Paul Mackerra <paulus@samba.org>s LKML-Reference: <20100331113056.2c7df509.randy.dunlap@oracle.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
-
由 Arnaldo Carvalho de Melo 提交于
Using 'pahole --packable' I found some structs that could be reorganized to eliminate alignment holes, in some cases getting them to be cacheline multiples. [acme@doppio linux-2.6-tip]$ codiff perf.old ~/bin/perf builtin-annotate.c: struct perf_session | -8 struct perf_header | -8 2 structs changed builtin-diff.c: struct sample_data | -8 1 struct changed diff__process_sample_event | -8 1 function changed, 8 bytes removed, diff: -8 builtin-sched.c: struct sched_atom | -8 1 struct changed builtin-timechart.c: struct per_pid | -8 1 struct changed cmd_timechart | -16 1 function changed, 16 bytes removed, diff: -16 builtin-probe.c: struct perf_probe_point | -8 struct perf_probe_event | -8 2 structs changed opt_add_probe_event | -3 1 function changed, 3 bytes removed, diff: -3 util/probe-finder.c: struct probe_finder | -8 1 struct changed find_kprobe_trace_events | -16 1 function changed, 16 bytes removed, diff: -16 /home/acme/bin/perf: 4 functions changed, 43 bytes removed, diff: -43 [acme@doppio linux-2.6-tip]$ Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Esc + Enter should be enough warning to avoid accidentaly exiting from the browser. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Suggested-by: NIngo Molnar <molnar@elte.hu> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Semantic conflict: arch/x86/kernel/cpu/perf_event_intel_ds.c Merge reason: pick up latest fixes, fix the conflict Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: hvc_console: Fix race between hvc_close and hvc_remove virtio: disable multiport console support. virtio: console makes incorrect assumption about virtio API virtio: console: Fix early_put_chars usage MAINTAINERS: Put the virtio-console entry in correct alphabetical order
-
由 Anton Blanchard 提交于
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Michael S. Tsirkin 提交于
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NAmit Shah <amit.shah@redhat.com>
-
由 François Diakhaté 提交于
Currently early_put_chars is not used by virtio_console because it can only be used once a port has been found, at which point it's too late because it is no longer needed. This patch should fix it. Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Move around the entry for virtio-console to keep the file sorted. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Kevin Hilman 提交于
rwsems can be used with IRQs disabled, particularily in early boot before IRQs are enabled. Currently the spin_unlock_irq() usage in the slow-patch will unconditionally enable interrupts and cause problems since interrupts are not yet initialized or enabled. This patch uses save/restore versions of IRQ spinlocks in the slowpath to ensure interrupts are not unintentionally disabled. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
If nfs atomic open implementation ends up doing open request from ->d_revalidate() codepath and gets an error from server, return that error to caller explicitly and don't bother with lookup_instantiate_filp() at all. ->d_revalidate() can return an error itself just fine... See http://bugzilla.kernel.org/show_bug.cgi?id=15674 http://marc.info/?l=linux-kernel&m=126988782722711&w=2 for original report. Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Enable Nehalem-EX support perf kmem: Fix breakage introduced by 5a0e3ad6 slab.h script
-
由 Linus Torvalds 提交于
Merge branch 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards x86: Increase CONFIG_NODES_SHIFT max to 10 ibft, x86: Change reserve_ibft_region() to find_ibft_region() x86, hpet: Fix bug in RTC emulation x86, hpet: Erratum workaround for read after write of HPET comparator bootmem, x86: Fix 32bit numa system without RAM on node 0 nobootmem, x86: Fix 32bit numa system without RAM on node 0 x86: Handle overlapping mptables x86: Make e820_remove_range to handle all covered case x86-32, resume: do a global tlb flush in S4 resume
-
由 Sergei Shtylyov 提交于
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 07 4月, 2010 14 次提交
-
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Remove unused variable from ptrace microblaze: io.h: Add io big-endian function microblaze: Enable memory leak detector microblaze: Fix futex code microblaze: Fix ftrace_update_ftrace_func panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc由 Linus Torvalds 提交于
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: nodemask: include slab.h from drivers/base/node.c
-
由 David Howells 提交于
Order the debugfs statistics correctly. The values displayed through a seq_printf() statement should be in the same order as the names in the format string. In the 'Lookups' line, objects created ('crt=') and lookups timed out ('tmo=') have their values transposed. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
In NOMMU mode, the FRV segment handling is broken because KERNEL_DS == USER_DS. This causes tests of the following sort: /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) return NULL; to malfunction. To fix this, make USER_DS the top of RAM instead of the top of the non-IO address space, and make KERNEL_DS one more than the top of the non-IO address space. Also get rid of FRV's __addr_ok() as nothing uses it. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Hide uncached_access() when pgprot_noncached is not #defined. This prevents the following warning: CC drivers/char/mem.o drivers/char/mem.c:229: warning: 'uncached_access' defined but not used Repairs d7d4d849 ("drivers/char/mem.c: cleanups"). Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Zapolskiy 提交于
On exit paths in mxc_rtc_probe() method some resources are not freed correctly. This patch fixes: * unrequested memory region containing imx RTC registers * iounmap() isn't called on exit_free_pdata branch * clock get rate is called for freed clock source * clock isn't disabled on exit_put_clk branch To simplify the fix managed device resources are used. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
Presently, memcg's FILE_MAPPED accounting has following race with move_account (happens at rmdir()). increment page->mapcount (rmap.c) mem_cgroup_update_file_mapped() move_account() lock_page_cgroup() check page_mapped() if page_mapped(page)>1 { FILE_MAPPED -1 from old memcg FILE_MAPPED +1 to old memcg } ..... overwrite pc->mem_cgroup unlock_page_cgroup() lock_page_cgroup() FILE_MAPPED + 1 to pc->mem_cgroup unlock_page_cgroup() Then, old memcg (-1 file mapped) new memcg (+2 file mapped) This happens because move_account see page_mapped() which is not guarded by lock_page_cgroup(). This patch adds FILE_MAPPED flag to page_cgroup and move account information based on it. Now, all checks are synchronous with lock_page_cgroup(). Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: NBalbir Singh <balbir@in.ibm.com> Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Andrea Righi <arighi@develer.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
When we look into pagemap using page-types with option -p, the value of pfn for hugepages looks wrong (see below.) This is because pte was evaluated only once for one vma although it should be updated for each hugepage. This patch fixes it. $ page-types -p 3277 -Nl -b huge voffset offset len flags 7f21e8a00 11e400 1 ___U___________H_G________________ 7f21e8a01 11e401 1ff ________________TG________________ ^^^ 7f21e8c00 11e400 1 ___U___________H_G________________ 7f21e8c01 11e401 1ff ________________TG________________ ^^^ One hugepage contains 1 head page and 511 tail pages in x86_64 and each two lines represent each hugepage. Voffset and offset mean virtual address and physical address in the page unit, respectively. The different hugepages should not have the same offset value. With this patch applied: $ page-types -p 3386 -Nl -b huge voffset offset len flags 7fec7a600 112c00 1 ___UD__________H_G________________ 7fec7a601 112c01 1ff ________________TG________________ ^^^ 7fec7a800 113200 1 ___UD__________H_G________________ 7fec7a801 113201 1ff ________________TG________________ ^^^ OK More info: - This patch modifies walk_page_range()'s hugepage walker. But the change only affects pagemap_read(), which is the only caller of hugepage callback. - Without this patch, hugetlb_entry() callback is called per vma, that doesn't match the natural expectation from its name. - With this patch, hugetlb_entry() is called per hugepte entry and the callback can become much simpler. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yong Zhang 提交于
The log of commit edaac8e3 ("ratelimit: Fix/allow use in atomic contexts"), indicates that we want to suppress the callback when the trylock fails. Signed-off-by: NYong Zhang <yong.zhang@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yong Zhang 提交于
When __ratelimit() returns 1 this means that we can go ahead. Signed-off-by: NYong Zhang <yong.zhang@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yong Zhang 提交于
To prevent from wrongly using the return value. [akpm@linux-foundation.org: fix spello] Signed-off-by: NYong Zhang <yong.zhang@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
commit dcefafb6 ("/dev/mem: dont allow seek to last page") inadvertently disabled rewinding on /dev/mem. This broke x86info for example. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Requested by hch, for consistency now it is exported. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Anton Blanchard <anton@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-