提交 bd3e1c7c 编写于 作者: J Jonathon Jongsma 提交者: Dave Airlie

drm/qxl: validate monitors config modes

Due to some recent changes in
drm_helper_probe_single_connector_modes_merge_bits(), old custom modes
were not being pruned properly. In current kernels,
drm_mode_validate_basic() is called to sanity-check each mode in the
list. If the sanity-check passes, the mode's status gets set to to
MODE_OK. In older kernels this check was not done, so old custom modes
would still have a status of MODE_UNVERIFIED at this point, and would
therefore be pruned later in the function.

As a result of this new behavior, the list of modes for a device always
includes every custom mode ever configured for the device, with the
largest one listed first. Since desktop environments usually choose the
first preferred mode when a hotplug event is emitted, this had the
result of making it very difficult for the user to reduce the size of
the display.

The qxl driver did implement the mode_valid connector function, but it
was empty. In order to restore the old behavior where old custom modes
are pruned, we implement a proper mode_valid function for the qxl
driver. This function now checks each mode against the last configured
custom mode and the list of standard modes. If the mode doesn't match
any of these, its status is set to MODE_BAD so that it will be pruned as
expected.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 73bf1b7b
......@@ -160,9 +160,35 @@ static int qxl_add_monitors_config_modes(struct drm_connector *connector,
*pwidth = head->width;
*pheight = head->height;
drm_mode_probed_add(connector, mode);
/* remember the last custom size for mode validation */
qdev->monitors_config_width = mode->hdisplay;
qdev->monitors_config_height = mode->vdisplay;
return 1;
}
static struct mode_size {
int w;
int h;
} common_modes[] = {
{ 640, 480},
{ 720, 480},
{ 800, 600},
{ 848, 480},
{1024, 768},
{1152, 768},
{1280, 720},
{1280, 800},
{1280, 854},
{1280, 960},
{1280, 1024},
{1440, 900},
{1400, 1050},
{1680, 1050},
{1600, 1200},
{1920, 1080},
{1920, 1200}
};
static int qxl_add_common_modes(struct drm_connector *connector,
unsigned pwidth,
unsigned pheight)
......@@ -170,29 +196,6 @@ static int qxl_add_common_modes(struct drm_connector *connector,
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode = NULL;
int i;
struct mode_size {
int w;
int h;
} common_modes[] = {
{ 640, 480},
{ 720, 480},
{ 800, 600},
{ 848, 480},
{1024, 768},
{1152, 768},
{1280, 720},
{1280, 800},
{1280, 854},
{1280, 960},
{1280, 1024},
{1440, 900},
{1400, 1050},
{1680, 1050},
{1600, 1200},
{1920, 1080},
{1920, 1200}
};
for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h,
60, false, false, false);
......@@ -823,11 +826,22 @@ static int qxl_conn_get_modes(struct drm_connector *connector)
static int qxl_conn_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *ddev = connector->dev;
struct qxl_device *qdev = ddev->dev_private;
int i;
/* TODO: is this called for user defined modes? (xrandr --add-mode)
* TODO: check that the mode fits in the framebuffer */
DRM_DEBUG("%s: %dx%d status=%d\n", mode->name, mode->hdisplay,
mode->vdisplay, mode->status);
return MODE_OK;
if(qdev->monitors_config_width == mode->hdisplay &&
qdev->monitors_config_height == mode->vdisplay)
return MODE_OK;
for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
if (common_modes[i].w == mode->hdisplay && common_modes[i].h == mode->vdisplay)
return MODE_OK;
}
return MODE_BAD;
}
static struct drm_encoder *qxl_best_encoder(struct drm_connector *connector)
......
......@@ -325,6 +325,8 @@ struct qxl_device {
struct work_struct fb_work;
struct drm_property *hotplug_mode_update_property;
int monitors_config_width;
int monitors_config_height;
};
/* forward declaration for QXL_INFO_IO */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册