Merge branch 'net-usb-Check-for-Wake-on-LAN-modes'

Florian Fainelli says:

====================
net: usb: Check for Wake-on-LAN modes

Most of our USB Ethernet drivers don't seem to be checking properly
whether the user is supplying a correct Wake-on-LAN mode to enter, so
the experience as an user could be confusing, since it would generally
lead to either no wake-up, or the device not being marked for wake-up.

Please review!

Changes in v2:

- fixed lan78xx handling, thanks Woojung!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/usb/asix_common.c

@@ -607,6 +607,9 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= AX_MONITOR_LINK;
 	if (wolinfo->wolopts & WAKE_MAGIC)

drivers/net/usb/ax88179_178a.c

@@ -566,6 +566,9 @@ ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= AX_MONITOR_MODE_RWLC;
 	if (wolinfo->wolopts & WAKE_MAGIC)

drivers/net/usb/lan78xx.c

@@ -1401,19 +1401,10 @@ static int lan78xx_set_wol(struct net_device *netdev,
 	if (ret < 0)
 		return ret;
 
-	pdata->wol = 0;
-	if (wol->wolopts & WAKE_UCAST)
-		pdata->wol |= WAKE_UCAST;
-	if (wol->wolopts & WAKE_MCAST)
-		pdata->wol |= WAKE_MCAST;
-	if (wol->wolopts & WAKE_BCAST)
-		pdata->wol |= WAKE_BCAST;
-	if (wol->wolopts & WAKE_MAGIC)
-		pdata->wol |= WAKE_MAGIC;
-	if (wol->wolopts & WAKE_PHY)
-		pdata->wol |= WAKE_PHY;
-	if (wol->wolopts & WAKE_ARP)
-		pdata->wol |= WAKE_ARP;
+	if (wol->wolopts & ~WAKE_ALL)
+		return -EINVAL;
+
+	pdata->wol = wol->wolopts;
 
 	device_set_wakeup_enable(&dev->udev->dev, (bool)wol->wolopts);
 

drivers/net/usb/r8152.c

@@ -4506,6 +4506,9 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (!rtl_can_wakeup(tp))
 		return -EOPNOTSUPP;
 
+	if (wol->wolopts & ~WAKE_ANY)
+		return -EINVAL;
+
 	ret = usb_autopm_get_interface(tp->intf);
 	if (ret < 0)
 		goto out_set_wol;

drivers/net/usb/smsc75xx.c

@@ -731,6 +731,9 @@ static int smsc75xx_ethtool_set_wol(struct net_device *net,
 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 	int ret;
 
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
 	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
 
 	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);

drivers/net/usb/smsc95xx.c

@@ -774,6 +774,9 @@ static int smsc95xx_ethtool_set_wol(struct net_device *net,
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	int ret;
 
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
 	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
 
 	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);

drivers/net/usb/sr9800.c

@@ -421,6 +421,9 @@ sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= SR_MONITOR_LINK;
 	if (wolinfo->wolopts & WAKE_MAGIC)