Merge remote branch 'upstream/develop' into bert

CMakeLists.txt

@@ -75,7 +75,6 @@ include(generic)
 include(flags)
 
 if (NOT CLIENT_ONLY)
-include(external/mklml)
 include(paddlepaddle)
 include(external/opencv)
 endif()

cmake/external/mklml.cmake

-# Copyright (c) 2017 PaddlePaddle Authors. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-IF(NOT ${WITH_MKLML})
-  return()
-ENDIF(NOT ${WITH_MKLML})
-
-IF(APPLE)
-    MESSAGE(WARNING "Mac is not supported with MKLML in Paddle yet. Force WITH_MKLML=OFF.")
-    SET(WITH_MKLML OFF CACHE STRING "Disable MKLML package in MacOS" FORCE)
-    return()
-ENDIF()
-
-INCLUDE(ExternalProject)
-SET(MKLML_DST_DIR       "mklml")
-SET(MKLML_INSTALL_ROOT  "${THIRD_PARTY_PATH}/install")
-SET(MKLML_INSTALL_DIR   ${MKLML_INSTALL_ROOT}/${MKLML_DST_DIR})
-SET(MKLML_ROOT          ${MKLML_INSTALL_DIR})
-SET(MKLML_INC_DIR       ${MKLML_ROOT}/include)
-SET(MKLML_LIB_DIR       ${MKLML_ROOT}/lib)
-SET(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_RPATH}" "${MKLML_ROOT}/lib")
-
-SET(TIME_VERSION "2019.0.1.20181227")
-IF(WIN32)
-    SET(MKLML_VER "mklml_win_${TIME_VERSION}" CACHE STRING "" FORCE)
-    SET(MKLML_URL "https://paddlepaddledeps.cdn.bcebos.com/${MKLML_VER}.zip" CACHE STRING "" FORCE)
-    SET(MKLML_LIB                 ${MKLML_LIB_DIR}/mklml.lib)
-    SET(MKLML_IOMP_LIB            ${MKLML_LIB_DIR}/libiomp5md.lib)
-    SET(MKLML_SHARED_LIB          ${MKLML_LIB_DIR}/mklml.dll)
-    SET(MKLML_SHARED_IOMP_LIB     ${MKLML_LIB_DIR}/libiomp5md.dll)
-ELSE()  
-    SET(MKLML_VER "mklml_lnx_${TIME_VERSION}" CACHE STRING "" FORCE)
-    SET(MKLML_URL "http://paddlepaddledeps.cdn.bcebos.com/${MKLML_VER}.tgz" CACHE STRING "" FORCE)
-    SET(MKLML_LIB                 ${MKLML_LIB_DIR}/libmklml_intel.so)
-    SET(MKLML_IOMP_LIB            ${MKLML_LIB_DIR}/libiomp5.so)
-    SET(MKLML_SHARED_LIB          ${MKLML_LIB_DIR}/libmklml_intel.so)
-    SET(MKLML_SHARED_IOMP_LIB     ${MKLML_LIB_DIR}/libiomp5.so)
-ENDIF()
-
-SET(MKLML_PROJECT       "extern_mklml")
-MESSAGE(STATUS "MKLML_VER: ${MKLML_VER}, MKLML_URL: ${MKLML_URL}")
-SET(MKLML_SOURCE_DIR    "${THIRD_PARTY_PATH}/mklml")
-SET(MKLML_DOWNLOAD_DIR  "${MKLML_SOURCE_DIR}/src/${MKLML_PROJECT}")
-
-ExternalProject_Add(
-    ${MKLML_PROJECT}
-    ${EXTERNAL_PROJECT_LOG_ARGS}
-    PREFIX                 ${MKLML_SOURCE_DIR}
-    URL                    ${MKLML_URL}
-    DOWNLOAD_DIR          ${MKLML_DOWNLOAD_DIR}
-    DOWNLOAD_NO_PROGRESS  1
-    CONFIGURE_COMMAND     ""
-    BUILD_COMMAND         ""
-    UPDATE_COMMAND ""
-    INSTALL_COMMAND
-        ${CMAKE_COMMAND} -E copy_directory ${MKLML_DOWNLOAD_DIR}/include ${MKLML_INC_DIR} &&
-        ${CMAKE_COMMAND} -E copy_directory ${MKLML_DOWNLOAD_DIR}/lib ${MKLML_LIB_DIR}
-)
-
-INCLUDE_DIRECTORIES(${MKLML_INC_DIR})
-
-ADD_LIBRARY(mklml SHARED IMPORTED GLOBAL)
-SET_PROPERTY(TARGET mklml PROPERTY IMPORTED_LOCATION ${MKLML_LIB})
-ADD_DEPENDENCIES(mklml ${MKLML_PROJECT})
-LIST(APPEND external_project_dependencies mklml)

configure/proto/server_configure.proto

@@ -40,6 +40,9 @@ message EngineDesc {
   }
   optional SparseParamServiceType sparse_param_service_type = 11;
   optional string sparse_param_service_table_name = 12;
+  optional bool enable_memory_optimization = 13;
+  optional bool static_optimization = 14;
+  optional bool force_update_static_cache = 15;
 };
 
 // model_toolkit conf
@@ -49,8 +52,7 @@ message ModelToolkitConf { repeated EngineDesc engines = 1; };
 message ResourceConf {
   required string model_toolkit_path = 1;
   required string model_toolkit_file = 2;
-  optional string cube_config_path = 3;
-  optional string cube_config_file = 4;
+  optional string cube_config_file = 3;
 };
 
 // DAG node depency info

configure/tests/test_configure.cpp

@@ -68,6 +68,9 @@ int test_write_conf() {
   engine->set_enable_batch_align(0);
   engine->set_sparse_param_service_type(EngineDesc::LOCAL);
   engine->set_sparse_param_service_table_name("local_kv");
+  engine->set_enable_memory_optimization(true);
+  engine->set_static_optimization(false);
+  engine->set_force_update_static_cache(false);
 
   int ret = baidu::paddle_serving::configure::write_proto_conf(
       &model_toolkit_conf, output_dir, model_toolkit_conf_file);
@@ -79,6 +82,7 @@ int test_write_conf() {
   ResourceConf resource_conf;
   resource_conf.set_model_toolkit_path(output_dir);
   resource_conf.set_model_toolkit_file("model_toolkit.prototxt");
+  resource_conf.set_cube_config_file("./conf/cube.conf");
   ret = baidu::paddle_serving::configure::write_proto_conf(
       &resource_conf, output_dir, resource_conf_file);
   if (ret != 0) {

cube/cube-agent/src/agent/define.go

@@ -17,9 +17,6 @@ package agent
 import (
 	"errors"
 	_ "github.com/Badangel/logex"
-	"github.com/Badangel/pipeline"
-	"os/exec"
-	"strconv"
 	"strings"
 	"sync"
 )
@@ -89,26 +86,3 @@ func GetMaster(master string) (host, port string, err error) {
 		return MasterHost[0], MasterPort[0], nil
 	}
 }
-
-func init() {
-	dfCmd := "df -h | grep -E '/home|/ssd'"
-	stdout, _, err := pipeline.Run(exec.Command("/bin/bash", "-c", dfCmd))
-
-	if err == nil && stdout.String() != "" {
-		t := strings.TrimSpace(stdout.String())
-		diskLi := strings.Split(t, "\n")
-		for _, diskStr := range diskLi {
-			disk := strings.Fields(diskStr)
-			usedPercent, _ := strconv.Atoi(strings.TrimRight(disk[4], "%"))
-			if usedPercent <= 40 {
-				disks = append(disks, disk[5])
-			}
-		}
-	}
-
-	if len(disks) == 0 {
-		disks = append(disks, "/home")
-	}
-
-	//logex.Debugf("available disks found: (%+v)", disks)
-}

cube/cube-agent/src/agent/util.go

@@ -132,7 +132,7 @@ func getHostname(ip string) (hostname string, err error) {
 		//logex.Warningf("cannot find the hostname of ip (%s), error (%v)", ip, err)
 	} else {
 		if len(hostnames) > 0 {
-			hostname = hostnames[0][:strings.LastIndex(hostnames[0], ".baidu.com.")]
+			hostname = hostnames[0]
 		} else {
 			hostname = ip
 		}

cube/cube-agent/src/agent/work.go

@@ -725,7 +725,7 @@ func DoDownloadIndividual(source, downloadDir string, isService bool, timeOut in
 func checkSources(source string) ([]string, error) {
 	sources := strings.Split(source, ";")
 	for i := 0; i < len(sources); i++ {
-		if sources[i] == "" || !strings.HasPrefix(sources[i], "ftp://") {
+		if sources[i] == "" || (!strings.HasPrefix(sources[i], "ftp://") && !strings.HasPrefix(sources[i], "http://")) {
 			return sources, errors.New("Invalid sources")
 		}
 	}

cube/cube-server/src/main.cpp

@@ -12,6 +12,7 @@
 // See the License for the specific language governing permissions and
 // limitations under the License.
 
+#include <signal.h>
 #include <sys/stat.h>
 
 #include <brpc/server.h>

cube/cube-transfer/conf/transfer.conf

 [default]
 dict_name: test_dict
 mode: base_only
-storage_place: LOCAL
+download_mode: http
+wget_port: 8009
 buildtool_local: /home/work/Serving/build/output/bin/cube-builder
 donefile_address: http://127.0.0.1/home/work/dangyifei/donefile
 output_address: /home/work/dangyifei/test-transfer/test_data/output
 tmp_address: /home/work/dangyifei/test-transfer/test_data/tmp
-shard_num: 1
-copy_num: 2
+shard_num: 2
+copy_num: 1
 deploy_path: /home/work/test_dict
 transfer_address: 127.0.0.1
 
 [cube_agent]
 agent0_0: 127.0.0.1:8001
 cube0_0: 127.0.0.1:8000:/ssd2/cube_open
-agent0_1: 127.0.0.1:8001
-cube0_1: 127.0.0.1:8000:/home/disk1/cube_open
+agent1_0: 127.0.0.1:8001
+cube1_0: 127.0.0.1:8000:/home/disk1/cube_open

cube/cube-transfer/src/cube-transfer.go

@@ -16,8 +16,8 @@ package main
 
 import (
 	"fmt"
-	"github.com/docopt/docopt-go"
 	"github.com/Badangel/logex"
+	"github.com/docopt/docopt-go"
 	"os"
 	"path/filepath"
 	"runtime"
@@ -64,6 +64,7 @@ Log options:
 
 	// settings:
 	if opts["-p"] == nil {
+		logex.Fatal("ERROR: -p PORT must be set!")
 		fmt.Fprintln(os.Stderr, "ERROR: -p PORT must be set!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -72,6 +73,7 @@ Log options:
 	logex.Notice(">>> port:", transfer.Port)
 
 	if opts["--config"] == nil {
+		logex.Fatal("ERROR: --config config_file must be set!")
 		fmt.Fprintln(os.Stderr, "ERROR: --config config_file must be set!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -81,6 +83,7 @@ Log options:
 	configMgr.Init(opts["--config"].(string))
 	transfer.Dict.DictName = configMgr.Read("default", "dict_name")
 	if transfer.Dict.DictName == "" {
+		logex.Fatal("ERROR: nead [default] DictName in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] DictName in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -89,22 +92,40 @@ Log options:
 
 	transfer.Dict.DictMode = configMgr.Read("default", "mode")
 	if transfer.Dict.DictMode == "" {
+		logex.Fatal("ERROR: nead [default] DictMode in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] DictMode in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
 	}
 	logex.Notice(">>> Mode:", transfer.Dict.DictMode)
 
-	transfer.Dict.StoragePlace = configMgr.Read("default", "storage_place")
-	if transfer.Dict.StoragePlace == "" || transfer.Dict.StoragePlace != "LOCAL" {
-		fmt.Fprintln(os.Stderr, "ERROR: nead [default] StoragePlace in config_file! only support Local")
+	transfer.Dict.DownloadMode = configMgr.Read("default", "download_mode")
+	if transfer.Dict.DownloadMode != "http" && transfer.Dict.DownloadMode != "ftp" {
+		logex.Fatal("ERROR: nead [default] download_mode in config_file! only support ftp or http")
+		fmt.Fprintln(os.Stderr, "ERROR: nead [default] download_mode in config_file! only support ftp or http")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
 	}
-	logex.Notice(">>> StoragePlace:", transfer.Dict.StoragePlace)
+	logex.Notice(">>> DownloadMode:", transfer.Dict.DownloadMode)
+
+	transfer.Dict.WgetPort = configMgr.Read("default", "wget_port")
+	if transfer.Dict.WgetPort == "" {
+		logex.Fatal("ERROR: nead [default] wget_port in config_file!")
+		fmt.Fprintln(os.Stderr, "ERROR: nead [default] wget_port in config_file!")
+		fmt.Fprintln(os.Stderr, usage)
+		os.Exit(1)
+	}
+	var wget_port int
+	wget_port, err = strconv.Atoi(transfer.Dict.WgetPort)
+	if err != nil {
+		logex.Fatal("wget_port form is not right need int")
+		os.Exit(1)
+	}
+	logex.Notice(">>> WgetPort:", wget_port)
 
 	transfer.BuildToolLocal = configMgr.Read("default", "buildtool_local")
 	if transfer.BuildToolLocal == "" {
+		logex.Fatal("ERROR: nead [default] BuildToolLocal in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] BuildToolLocal in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -113,6 +134,7 @@ Log options:
 
 	transfer.Dict.DonefileAddress = configMgr.Read("default", "donefile_address")
 	if transfer.Dict.DonefileAddress == "" {
+		logex.Fatal("ERROR: nead [default] DonefileAddress in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] DonefileAddress in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -121,6 +143,7 @@ Log options:
 
 	transfer.Dict.OutputAddress = configMgr.Read("default", "output_address")
 	if transfer.Dict.OutputAddress == "" {
+		logex.Fatal("ERROR: nead [default] OutputAddress in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] OutputAddress in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -129,6 +152,7 @@ Log options:
 
 	transfer.Dict.TmpAddress = configMgr.Read("default", "tmp_address")
 	if transfer.Dict.TmpAddress == "" {
+		logex.Fatal("ERROR: nead [default] TmpAddress in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] TmpAddress in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -137,6 +161,7 @@ Log options:
 
 	ShardNumStr := configMgr.Read("default", "shard_num")
 	if ShardNumStr == "" {
+		logex.Fatal("ERROR: nead [default] ShardNum in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] ShardNum in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -150,6 +175,7 @@ Log options:
 
 	CopyNumStr := configMgr.Read("default", "copy_num")
 	if CopyNumStr == "" {
+		logex.Fatal("ERROR: nead [default] CopyNum in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] CopyNum in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -165,6 +191,7 @@ Log options:
 
 	transfer.Dict.DeployPath = configMgr.Read("default", "deploy_path")
 	if transfer.Dict.DeployPath == "" {
+		logex.Fatal("ERROR: nead [default] DeployPath in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] DeployPath in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -173,6 +200,7 @@ Log options:
 
 	transfer.TransferAddr = configMgr.Read("default", "transfer_address")
 	if transfer.TransferAddr == "" {
+		logex.Fatal("ERROR: nead [default] TransferAddr in config_file!")
 		fmt.Fprintln(os.Stderr, "ERROR: nead [default] TransferAddr in config_file!")
 		fmt.Fprintln(os.Stderr, usage)
 		os.Exit(1)
@@ -185,9 +213,17 @@ Log options:
 			agentName := fmt.Sprintf("agent%d_%d", i, j)
 			agentInfo := configMgr.Read("cube_agent", agentName)
 			agentInfoSlice := strings.Split(agentInfo, ":")
+			if len(agentInfoSlice) != 2 {
+				logex.Fatal("agent conf format not right! sample: ip:port")
+				os.Exit(1)
+			}
 			cubeName := fmt.Sprintf("cube%d_%d", i, j)
 			cubeInfo := configMgr.Read("cube_agent", cubeName)
 			cubeInfoSlice := strings.Split(cubeInfo, ":")
+			if len(cubeInfoSlice) != 3 {
+				logex.Fatal("cube conf format not right! sample: ip:port:deploy_path")
+				os.Exit(1)
+			}
 			instance.DictName = transfer.Dict.DictName
 			instance.AgentIp = agentInfoSlice[0]
 			instance.AgentPort, _ = strconv.Atoi(agentInfoSlice[1])

cube/cube-transfer/src/transfer/deployer.go

@@ -72,7 +72,7 @@ func CmdInstsDownload() {
 				json_params.Mode = Dict.WaitVersionInfo.Mode
 				json_params.ShardSeq = inst.Shard
 				json_params.Port = strconv.Itoa(inst.Port)
-				json_params.Source = dict.GetFileHead(Dict.StoragePlace, TransferAddr) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
+				json_params.Source = dict.GetFileHead(Dict.DownloadMode, TransferAddr, Dict.WgetPort) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
 				var address = fmt.Sprintf("http://%v:%v/agent/cmd", inst.AgentIp, inst.AgentPort)
 				logex.Noticef("[download cmd]%v:%v", address, json_params)
 				go nonBlockSendJsonReq("POST2", address, 120, &json_params, &keyAndRespSlice[i], chs[i])
@@ -121,7 +121,7 @@ func CmdInstsReload() {
 				json_params.Mode = Dict.WaitVersionInfo.Mode
 				json_params.ShardSeq = inst.Shard
 				json_params.Port = strconv.Itoa(inst.Port)
-				json_params.Source = dict.GetFileHead(Dict.StoragePlace, TransferAddr) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
+				json_params.Source = dict.GetFileHead(Dict.DownloadMode, TransferAddr, Dict.WgetPort) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
 
 				var address = fmt.Sprintf("http://%v:%v/agent/cmd", inst.AgentIp, inst.AgentPort)
 				logex.Noticef("[reload cmd]%v:%v", address, json_params)
@@ -170,7 +170,7 @@ func CmdInstsEnable() {
 				json_params.Mode = Dict.WaitVersionInfo.Mode
 				json_params.ShardSeq = inst.Shard
 				json_params.Port = strconv.Itoa(inst.Port)
-				json_params.Source = dict.GetFileHead(Dict.StoragePlace, TransferAddr) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
+				json_params.Source = dict.GetFileHead(Dict.DownloadMode, TransferAddr, Dict.WgetPort) + Dict.WaitVersionInfo.Output + "/" + json_params.DictName + "_part" + strconv.Itoa(inst.Shard) + ".tar"
 
 				var address = fmt.Sprintf("http://%v:%v/agent/cmd", inst.AgentIp, inst.AgentPort)
 				logex.Noticef("[enable cmd]%v:%v", address, json_params)

cube/cube-transfer/src/transfer/dict/dict_info.go

@@ -24,7 +24,8 @@ type DictInfo struct {
 	DonefileAddress    string            `json:"donefile_addr"`
 	OutputAddress      string            `json:"output_addr"`
 	TmpAddress         string            `json:"tmp_addr"`
-	StoragePlace       string            `json:"storage_place"`
+	DownloadMode       string            `json:"download_mode"`
+	WgetPort           string            `json:"wget_port"`
 	DownloadSuccInsts  int               `json:"download_inst"`
 	ReloadSuccInsts    int               `json:"reload_insts"`
 	EnableSuccInsts    int               `json:"enable_insts"`

cube/cube-transfer/src/transfer/dict/dict_shard_info.go

@@ -36,7 +36,7 @@ type DictShardInfo struct {
 	IsActive       bool   `json:"is_active,omitempty"`
 }
 
-func GetDictShardScaler(shard int, dictVersionInfo DictVersionInfo, storagePlace string, transferaddr string)(info DictShardInfo){
+func GetDictShardScaler(shard int, dictVersionInfo DictVersionInfo, downloadMode string, transferAddr string, wgetPort string)(info DictShardInfo){
 	info.Name = dictVersionInfo.DictName
 	info.Version = strconv.Itoa(dictVersionInfo.Version)
 	info.Depend = strconv.Itoa(dictVersionInfo.Depend)
@@ -44,16 +44,17 @@ func GetDictShardScaler(shard int, dictVersionInfo DictVersionInfo, storagePlace
 	info.Key = strconv.Itoa(dictVersionInfo.Key)
 	info.Mode = dictVersionInfo.Mode
 	info.Shard = shard
-	info.Source = GetFileHead(storagePlace, transferaddr) + dictVersionInfo.Output+ "/" + info.Version + "/" + info.Name + "_part" + strconv.Itoa(shard) + ".tar"
+	info.Source = GetFileHead(downloadMode, transferAddr, wgetPort) + dictVersionInfo.Output+ "/" + info.Version + "/" + info.Name + "_part" + strconv.Itoa(shard) + ".tar"
 	return
 }
 
 
-func GetFileHead(storagePlace string, transferaddr string) string {
-	if storagePlace == "LOCAL"{
-		return "ftp://" + transferaddr
+func GetFileHead(downloadMode string, transferAddr string, wgetPort string) string {
+	if downloadMode == "http" {
+		return HTTP_HEADER + transferAddr + ":" + wgetPort
+	} else if downloadMode == "ftp" {
+		return FTP_HEADER + transferAddr + ":" + wgetPort
 	} else {
 		return ""
 	}
-
 }
\ No newline at end of file

cube/cube-transfer/src/transfer/http_get.go

@@ -66,11 +66,11 @@ func GetDictScaler(subpath string, m map[string]string) (string, string, int, er
 	}
 
 	for _, version := range Dict.CurrentVersionInfo {
-		info := dict.GetDictShardScaler(shard, version, Dict.StoragePlace, TransferAddr)
+		info := dict.GetDictShardScaler(shard, version,  Dict.DownloadMode, TransferAddr, Dict.WgetPort)
 		infos = append(infos, info)
 	}
 	if Dict.WaitVersionInfo.Status > dict.Dict_Status_Deploying {
-		info := dict.GetDictShardScaler(shard, Dict.WaitVersionInfo, Dict.StoragePlace, TransferAddr)
+		info := dict.GetDictShardScaler(shard, Dict.WaitVersionInfo,  Dict.DownloadMode, TransferAddr, Dict.WgetPort)
 		infos = append(infos, info)
 	}
 

cube/cube-transfer/src/transfer/trigger.go

@@ -52,7 +52,16 @@ func GetDoneFileInfo(addr string) (version dict.DictVersionInfo, err error) {
 	} else {
 		contentss := string(contents)
 		lines := strings.Split(contentss, "\n")
-		index := len(lines) - 2
+		index := len(lines) - 1
+		//one line length smaller than 3 maybe blank or return
+		for len(lines[index]) < 3 {
+			index--
+		}
+		if index < 0 {
+			logex.Noticef("[trigrer]get base donfile info error")
+			err = fmt.Errorf("[trigrer]get base donfile info error")
+			return
+		}
 		var donefileInfo dict.DonefileInfo
 		fmt.Printf("line %v: %v\n", index, lines[index])
 		if err = json.Unmarshal([]byte(lines[index]), &donefileInfo); err != nil {
@@ -83,7 +92,13 @@ func GetDoneFileInfo(addr string) (version dict.DictVersionInfo, err error) {
 		} else {
 			contentss := string(contents)
 			lines := strings.Split(contentss, "\n")
+
 			for index := 0; index < len(lines)-1; index++ {
+				if len(lines[index]) < 3 {
+					logex.Noticef("[trigrer]get patch donfile info error")
+					err = fmt.Errorf("[trigrer]get patch donfile info error")
+					return
+				}
 				var donefileInfo dict.DonefileInfo
 				if err = json.Unmarshal([]byte(lines[index]), &donefileInfo); err != nil {
 					return

cube/doc/performance.md

+# Cube Server 社区版本性能报告
+## 机器配置
+Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz
+
+## 测试数据
+100w条样例kv 数据。 key为uint_64类型，单条value长度 40 Byte （一般实际场景对应一个10维特征向量）。
+
+## 单Key高qps访问场景
+一般来说实际预估服务生产环境下，单key访问场景较少，不过单机qps依然是一个比较重要的性能指标，故在下表提供了不同qps下单机Cube server性能指标。
+
+
+| qps | 10w | 50w | 100w | 
+|---|---|---|---|
+|kps|10w|50w|100w|
+|cpu(top)| 6.5% | 38.3% | 71.4% | 
+|client端延迟|  avg            196 us<br>50%            160 us<br>70%            188 us<br>90%            292 us<br>95%            419 us<br>97%            547 us<br>99%            835 us<br>99.9%         1556 us<br>99.99%        1779 us|  avg            563 us<br>50%            342 us<br>70%            502 us<br>90%           1063 us<br>95%           1703 us<br>97%           2399 us<br> 99%           4036 us<br>99.9%         7195 us<br>99.99%        7340 us|    avg           4234 us<br>50%           3120 us<br>70%           5459 us<br>90%          10657 us<br>95%          14074 us<br>97%          16215 us<br> 99%          19434 us<br>99.9%        29398 us<br>99.99%       33921 us|
+
+## 高kps场景
+生产环境下，预估服务更多的会以batch形式访问cube server，这类情况kps相对qps能更准确的判断服务性能。我们以单次100key为例，给出不同kps下cube server的相关性能指标。
+
+
+| qps | 2w | 10w | 20w | 
+|---|---|---|---|
+|kps|200w|1000w|2000w|
+|cpu(top)| 3.5% | 17.8% | 37.6% | 
+|client端延迟|  avg            375 us<br>50%            346 us<br>70%            390 us<br>90%            498 us<br>95%            582 us<br>97%            648 us<br>99%            908 us<br>99.9%         1623 us<br>99.99%        3312 us|  avg           1141 us<br>50%            900 us<br>70%           1237 us<br>90%           2028 us<br>95%           2662 us<br>97%           3173 us<br>99%           4614 us<br> 99.9%         6786 us<br>99.99%        6273 us|    avg           1940 us<br>50%           1299 us<br>70%           1876 us<br>90%           3629 us<br>95%           5535 us<br>97%           7365 us<br>99%          10529 us<br>99.9%        14060 us<br>99.99%       16028 us|
+
+## 分布式场景客户端延迟
+在batch查询场景下，单次batch查询耗时是业务方（特别是在线预估服务）非常关心的敏感指标。在分布式场景下，单次batch查询往往要并发请求下游所有分片server，此时batch查询耗时取决于最慢的分片请求。我们在下文给出了一个典型分布式场景下的batch查询耗时。
+
+测试条件:
+cube分片数:10 
+client机器ping下游server机器约0.06ms
+
+
+| batch size | 100 | 500 | 1000 | 
+|---|---|---|---|
+|qps|100|100|100|
+|kps|1w| 5w| 10w|
+|client端延迟|avg            324 us<br>80%            346 us<br>99%            1190 us<br>99.9%            3662 us<br>99.99%            9392 us|avg            466 us<br>80%            488 us<br>99%            1492 us<br>99.9%            4122 us<br>99.99%            10612 us|avg            675 us<br>80%            691 us<br>99%            2101 us<br>99.9%            5169 us<br>99.99%            14867 us|
+
+## 结语
+上述表格主要阐述了cube server单机性能，在生产环境下，对于更高的kps(qps)压力我们可以方便地通过增加副本的方式来增强集群负载能力。 在模型大小超过单机内存限制时，我们亦可通过部署多数据分片的分布式集群来提供服务。
+整体来说，cube性能能够满足当前业界各类预估服务的kv访问需求。
+
+## PS
+本文所列性能均为cube原始代码版本性能，如果根据实际情情况做适当调优：如链入tcmalloc or jemalloc、 进行numa绑定 以及 打开编译优化参数等等，都有可能进一步明显提升cube server的性能表现。

demo-client/CMakeLists.txt

@@ -83,6 +83,10 @@ install(TARGETS echo
         RUNTIME DESTINATION ${PADDLE_SERVING_INSTALL_DIR}/demo/client/echo/bin)
 install(DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/conf DESTINATION
         ${PADDLE_SERVING_INSTALL_DIR}/demo/client/echo/)
+install(FILES ${CMAKE_CURRENT_LIST_DIR}/python/echo.py
+        DESTINATION ${PADDLE_SERVING_INSTALL_DIR}/demo/client/echo/python)
+install(FILES ${CMAKE_CURRENT_LIST_DIR}/php/echo.php
+        DESTINATION ${PADDLE_SERVING_INSTALL_DIR}/demo/client/echo/php)
 
 install(TARGETS echo_kvdb
         RUNTIME DESTINATION ${PADDLE_SERVING_INSTALL_DIR}/demo/client/echo_kvdb/bin)
@@ -114,6 +118,14 @@ install(DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/conf DESTINATION
         ${PADDLE_SERVING_INSTALL_DIR}/demo/client/text_classification/)
 install(DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/data/text_classification DESTINATION
         ${PADDLE_SERVING_INSTALL_DIR}/demo/client/text_classification/data)
+install(FILES ${CMAKE_CURRENT_LIST_DIR}/python/text_classification.py
+        DESTINATION
+        ${PADDLE_SERVING_INSTALL_DIR}/demo/client/text_classification/python)
+install(FILES ${CMAKE_CURRENT_LIST_DIR}/php/text_classification.php
+        DESTINATION
+        ${PADDLE_SERVING_INSTALL_DIR}/demo/client/text_classification/php)
+
+
 
 install(TARGETS ctr_prediction
         RUNTIME DESTINATION

demo-client/php/echo.php

+<?
+// Copyright (c) 2019 PaddlePaddle Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+function http_post($url, $data) {
+    // array to json string
+    $data_string = json_encode($data);
+    $ch = curl_init($url);
+    curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
+    // post data 封装
+    curl_setopt($ch, CURLOPT_POSTFIELDS, $data_string);
+    // true是获取文本，不直接输出
+    curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
+    // 强制curl不使用100-continue
+    curl_setopt($ch, CURLOPT_HTTPHEADER, array('Expect:'));
+    // set header
+    curl_setopt($ch, CURLOPT_HTTPHEADER, array(
+        'Content-Type: application/json',
+        'Content-Length: ' . strlen($data_string))
+    );
+    // 执行
+    $result = curl_exec($ch);
+    curl_close($ch);
+    return $result;
+}
+
+//key value 数组，如果多，后面用逗号分开key =>value ,key1 => value1 ,....
+echo http_post('http://127.0.0.1:8010/BuiltinTestEchoService/inference', array("a" => 1, "b" => 0.5));
+?>

demo-client/php/text_classification.php

+<?
+// Copyright (c) 2019 PaddlePaddle Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+define(BATCH_SIZE, "10");
+
+function read_data($data_file, &$samples, &$labels) {
+    $handle = fopen($data_file, "r");
+
+    $search = array("(", ")", "[", "]");
+    $count = 0;
+
+    while (($buffer = fgets($handle)) !== false) {
+        $count++;
+        $buffer = str_ireplace($search, "", $buffer);
+        $x = explode(",", $buffer);
+        $ids = array();
+
+        for ($i = 0; $i < count($x); ++$i) {
+            $ids[] = (int)($x[$i]);
+        }
+
+        $label = array_slice($ids, count($ids) - 1);
+        $sample = array_slice($ids, 0, count($ids) - 1);
+        $samples[] = array("ids" => $sample);
+        $labels[] = $label;
+
+        unset($x);
+        unset($buffer);
+        unset($ids);
+        unset($sample);
+        unset($label);
+    }
+
+    if (!feof($handle)) {
+        echo "Unexpected fgets() fail";
+        return -1;
+    }
+    fclose($handle);
+}
+
+function &http_connect($url) {
+    $ch = curl_init($url);
+    curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
+    // true是获取文本，不直接输出
+    curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
+    // 强制curl不使用100-continue
+    curl_setopt($ch, CURLOPT_HTTPHEADER, array('Expect:'));
+    // set header
+    curl_setopt($ch,
+            CURLOPT_HTTPHEADER,
+            array(
+                'Content-Type: application/json'
+            )
+    );
+
+    return $ch;
+}
+
+function http_post(&$ch, $data) {
+    // array to json string
+    $data_string = json_encode($data);
+
+    // post data 封装
+    curl_setopt($ch, CURLOPT_POSTFIELDS, $data_string);
+
+    // set header
+    curl_setopt($ch,
+            CURLOPT_HTTPHEADER,
+            array(
+                'Content-Length: ' . strlen($data_string)
+            )
+    );
+
+    // 执行
+    $result = curl_exec($ch);
+    return $result;
+}
+
+if ($argc != 2) {
+    echo "Usage: php text_classification.php DATA_SET_FILE\n";
+    return -1;
+}
+
+ini_set('memory_limit', '-1');
+
+$samples = array();
+$labels = array();
+read_data($argv[1], $samples, $labels);
+echo count($samples) . "\n";
+
+$ch = &http_connect('http://127.0.0.1:8010/TextClassificationService/inference');
+
+$count = 0;
+for ($i = 0; $i < count($samples) - BATCH_SIZE; $i += BATCH_SIZE) {
+    $instances = array_slice($samples, $i, BATCH_SIZE);
+    echo http_post($ch, array("instances" => $instances)) . "\n";
+}
+
+curl_close($ch);
+
+?>

demo-client/python/echo.py

+#   Copyright (c) 2019 PaddlePaddle Authors. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import urllib2
+
+data = {"a": 1, "b": 0.5}
+request_json = json.dumps(data)
+
+req = urllib2.Request("http://127.0.0.1:8010/BuiltinTestEchoService/inference")
+try:
+    response = urllib2.urlopen(req, request_json, 1)
+    print response.read()
+except urllib2.HTTPError as e:
+    print e.reason

demo-client/python/text_classification.py

+#   Copyright (c) 2019 PaddlePaddle Authors. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import httplib
+import sys
+import os
+
+BATCH_SIZE = 10
+
+
+def data_reader(data_file, samples, labels):
+    if not os.path.exists(data_file):
+        print "Path %s not exist" % data_file
+        return -1
+
+    with open(data_file, "r") as f:
+        for line in f:
+            line = line.replace('(', ' ')
+            line = line.replace(')', ' ')
+            line = line.replace('[', ' ')
+            line = line.replace(']', ' ')
+            ids = line.split(',')
+            ids = [int(x) for x in ids]
+            label = ids[-1]
+            ids = ids[0:-1]
+            samples.append(ids)
+            labels.append(label)
+
+
+if __name__ == "__main__":
+    """ main
+    """
+    if len(sys.argv) != 2:
+        print "Usage: python text_classification.py DATA_FILE"
+        sys.exit(-1)
+
+    samples = []
+    labels = []
+    ret = data_reader(sys.argv[1], samples, labels)
+
+    conn = httplib.HTTPConnection("127.0.0.1", 8010)
+
+    for i in range(0, len(samples) - BATCH_SIZE, BATCH_SIZE):
+        batch = samples[i:i + BATCH_SIZE]
+        ids = []
+        for x in batch:
+            ids.append({"ids": x})
+        ids = {"instances": ids}
+
+        request_json = json.dumps(ids)
+
+        try:
+            conn.request('POST', "/TextClassificationService/inference",
+                         request_json, {"Content-Type": "application/json"})
+            response = conn.getresponse()
+            print response.read()
+        except httplib.HTTPException as e:
+            print e.reason

demo-serving/CMakeLists.txt

@@ -25,7 +25,12 @@ if (NOT EXISTS
 endif()
 
 include_directories(SYSTEM  ${CMAKE_CURRENT_LIST_DIR}/../kvdb/include)
-find_library(MKLML_LIBS NAMES libmklml_intel.so libiomp5.so)
+
+find_library(MKLML_LIB NAMES libmklml_intel.so PATHS                                
+    ${CMAKE_BINARY_DIR}/Paddle/third_party/install/mklml/lib/)                      
+find_library(MKLML_IOMP_LIB NAMES libiomp5.so PATHS                                 
+    ${CMAKE_BINARY_DIR}/Paddle/third_party/install/mklml/lib)
+
 include(op/CMakeLists.txt)
 include(proto/CMakeLists.txt)
 add_executable(serving ${serving_srcs})
@@ -75,8 +80,7 @@ install(FILES ${inc}
         DESTINATION ${PADDLE_SERVING_INSTALL_DIR}/include/serving)
 
 if (${WITH_MKL})
-        install(FILES ${THIRD_PARTY_PATH}/install/mklml/lib/libmklml_intel.so
-                ${THIRD_PARTY_PATH}/install/mklml/lib/libmklml_gnu.so
-                ${THIRD_PARTY_PATH}/install/mklml/lib/libiomp5.so DESTINATION
+    install(FILES ${CMAKE_BINARY_DIR}/Paddle/third_party/install/mklml/lib/libmklml_intel.so
+                ${CMAKE_BINARY_DIR}/Paddle/third_party/install/mklml/lib/libiomp5.so DESTINATION
                 ${PADDLE_SERVING_INSTALL_DIR}/demo/serving/bin)
 endif()

demo-serving/conf/model_toolkit.prototxt

 engines {
   name: "image_classification_resnet"
-  type: "FLUID_CPU_NATIVE_DIR"
+  type: "FLUID_CPU_ANALYSIS_DIR"
   reloadable_meta: "./data/model/paddle/fluid_time_file"
   reloadable_type: "timestamp_ne"
   model_data_path: "./data/model/paddle/fluid/SE_ResNeXt50_32x4d"
   runtime_thread_num: 0
   batch_infer_size: 0
   enable_batch_align: 0
+  enable_memory_optimization: true
+  static_optimization: false
+  force_update_static_cache: false
 }
+
 engines {
   name: "text_classification_bow"
   type: "FLUID_CPU_ANALYSIS_DIR"

doc/HTTP_INTERFACE.md

+# HTTP Inferface
+
+Paddle Serving服务均可以通过HTTP接口访问，客户端只需按照Service定义的Request消息格式构造json字符串即可。客户端构造HTTP请求，将json格式数据以POST请求发给serving端，serving端**自动**按Service定义的Protobuf消息格式，将json数据转换成protobuf消息。
+
+本文档介绍以python和PHP语言访问Serving的HTTP服务接口的用法。
+
+## 1. 访问地址
+
+访问Serving节点的HTTP服务与C++服务使用同一个端口（例如8010），访问URL规则为：
+
+```
+http://127.0.0.1:8010/ServiceName/inference
+http://127.0.0.1:8010/ServiceName/debug
+```
+
+其中ServiceName应该与Serving的配置文件`conf/services.prototxt`中配置的一致，假如有如下2个service：
+
+```protobuf
+services {
+  name: "BuiltinTestEchoService"
+  workflows: "workflow3"
+}
+
+services {
+  name: "TextClassificationService"
+  workflows: "workflow6"
+}
+```
+
+则访问上述2个Serving服务的HTTP URL分别为：
+
+```
+http://127.0.0.1:8010/BuiltinTestEchoService/inference
+http://127.0.0.1:8010/BuiltinTestEchoService/debug
+
+http://127.0.0.1:8010/TextClassificationService/inference
+http://127.0.0.1:8010/TextClassificationService/debug
+```
+
+## 2. Python访问HTTP Serving
+
+Python语言访问HTTP Serving，关键在于构造json格式的请求数据，可以通过以下步骤完成：
+
+1) 按照Service定义的Request消息格式构造python object
+2) `json.dump()` / `json.dumps()` 等函数将python object转换成json格式字符串
+
+以TextClassificationService为例，关键代码如下：
+
+```python
+# Connect to server
+conn = httplib.HTTPConnection("127.0.0.1", 8010)
+
+# samples是一个list，其中每个元素是一个ids字典：
+# samples[0] = [190, 1, 70, 382, 914, 5146, 190...]
+for i in range(0, len(samples) - BATCH_SIZE, BATCH_SIZE):
+    # 构建批量预测数据
+    batch = samples[i: i + BATCH_SIZE]
+    ids = []
+    for x in batch:
+        ids.append({"ids" : x})
+    ids = {"instances": ids}
+
+    # python object转成json
+    request_json = json.dumps(ids)
+
+    # 请求HTTP服务，打印response
+    try:
+        conn.request('POST', "/TextClassificationService/inference", request_json, {"Content-Type": "application/json"})
+        response = conn.getresponse()
+        print response.read()
+    except httplib.HTTPException as e:
+        print e.reason
+```
+
+完整示例请参考[text_classification.py](../demo-client/python/text_classification.py)
+
+## 3. PHP访问HTTP Serving
+
+PHP语言构造json格式字符串的步骤如下：
+
+1) 按照Service定义的Request消息格式，构造PHP array
+2) `json_encode()`函数将PHP array转换成json字符串
+
+以TextCLassificationService为例，关键代码如下：
+
+```PHP
+function http_post(&$ch, $data) {
+    // array to json string
+    $data_string = json_encode($data);
+
+    // post data 封装
+    curl_setopt($ch, CURLOPT_POSTFIELDS, $data_string);
+
+    // set header
+    curl_setopt($ch,
+            CURLOPT_HTTPHEADER,
+            array(
+                'Content-Length: ' . strlen($data_string)
+            )
+    );
+
+    // 执行
+    $result = curl_exec($ch);
+    return $result;
+}
+
+$ch = &http_connect('http://127.0.0.1:8010/TextClassificationService/inference');
+
+$count = 0;
+
+# $samples是一个2层array，其中每个元素是一个如下array：
+# $samples[0] = array(
+#                   "ids" => array(
+#                                 [0] => int(190),
+#                                 [1] => int(1),
+#                                 [2] => int(70),
+#                                 [3] => int(382),
+#                                 [4] => int(914),
+#                                 [5] => int(5146),
+#                                 [6] => int(190)...)
+#                    )
+
+for ($i = 0; $i < count($samples) - BATCH_SIZE; $i += BATCH_SIZE) {
+    $instances = array_slice($samples, $i, BATCH_SIZE);
+    echo http_post($ch, array("instances" => $instances)) . "\n";
+}
+
+curl_close($ch);
+```
+
+完整代码请参考[text_classification.php](../demo-client/php/text_classification.php)

doc/SERVING_CONFIGURE.md

@@ -18,9 +18,8 @@ services {
 
 其中
 
-port: 该字段标明本机serving实例启动的监听端口。默认为8010。还可以通过--port=8010命令行参数指定。
-
-services: 可以配置多个services。Paddle Serving被设计为单个Serving实例可以同时承载多个预测服务，服务间通过service name进行区分。例如以下代码配置2个预测服务：
+- port: 该字段标明本机serving实例启动的监听端口。默认为8010。还可以通过--port=8010命令行参数指定。
+- services: 可以配置多个services。Paddle Serving被设计为单个Serving实例可以同时承载多个预测服务，服务间通过service name进行区分。例如以下代码配置2个预测服务：
 ```JSON
 port: 8010
 services {
@@ -33,7 +32,7 @@ services {
 }
 ```
 
-service.name: 请填写serving/proto/xx.proto文件的service名称，例如，在serving/proto/image_class.proto中，service名称如下声明：
+- service.name: 请填写serving/proto/xx.proto文件的service名称，例如，在serving/proto/image_class.proto中，service名称如下声明：
 ```JSON
 service ImageClassifyService {
   rpc inference(Request) returns (Response);
@@ -43,11 +42,11 @@ service ImageClassifyService {
 ```
 则service name就是`ImageClassifyService`
 
-service.workflows: 用于指定该service下所配的workflow列表。可以配置多个workflow。在本例中，为`ImageClassifyService`配置了一个workflow：`workflow1`。`workflow1`的具体定义在workflow.prototxt
+- service.workflows: 用于指定该service下所配的workflow列表。可以配置多个workflow。在本例中，为`ImageClassifyService`配置了一个workflow：`workflow1`。`workflow1`的具体定义在workflow.prototxt
 
 ## 2. workflow.prototxt
 
-workflow.prototxt用来描述每一个具体的workflow，他的protobuf格式可参考`configure/server_configure.protobuf`的`Workflow`类型。具体的磁盘文件路径可通过--workflow_path和--workflow_file指定。一个例子如下：
+workflow.prototxt用来描述每一个具体的workflow，他的protobuf格式可参考`configure/server_configure.protobuf`的`Workflow`类型。具体的磁盘文件路径可通过`--workflow_path`和`--workflow_file`指定。一个例子如下：
 
 ```JSON
 workflows {
@@ -86,32 +85,32 @@ workflows {
 ```
 以上样例配置了2个workflow：`workflow1`和`workflow2`。以`workflow1`为例：
 
-name: workflow名称，用于从service.prototxt索引到具体的workflow
-
-workflow_type: 可选"Sequence", "Parallel"，表示本workflow下节点所代表的OP是否可并行。**当前只支持Sequence类型，如配置了Parallel类型，则该workflow不会被执行**
-
-nodes: 用于串联成workflow的所有节点，可配置多个nodes。nodes间通过配置dependencies串联起来
-
-node.name: 随意，建议取一个能代表当前node所执行OP的类
-
-node.type: 当前node所执行OP的类名称，与serving/op/下每个具体的OP类的名称对应
-
-node.dependencies: 依赖的上游node列表
-
-node.dependencies.name: 与workflow内节点的name保持一致
-
-node.dependencies.mode: RO-Read Only, RW-Read Write
+- name: workflow名称，用于从service.prototxt索引到具体的workflow
+- workflow_type: 可选"Sequence", "Parallel"，表示本workflow下节点所代表的OP是否可并行。**当前只支持Sequence类型，如配置了Parallel类型，则该workflow不会被执行**
+- nodes: 用于串联成workflow的所有节点，可配置多个nodes。nodes间通过配置dependencies串联起来
+- node.name: 随意，建议取一个能代表当前node所执行OP的类
+- node.type: 当前node所执行OP的类名称，与serving/op/下每个具体的OP类的名称对应
+- node.dependencies: 依赖的上游node列表
+- node.dependencies.name: 与workflow内节点的name保持一致
+- node.dependencies.mode: RO-Read Only, RW-Read Write
 
 # 3. resource.prototxt
 
-Serving端resource配置的入口是resource.prototxt，用于配置模型信息。它的protobuf格式参考`configure/proto/server_configure.proto`的ResourceConf。具体的磁盘文件路径可用--resource_path和--resource_file指定。样例如下：
+Serving端resource配置的入口是resource.prototxt，用于配置模型信息。它的protobuf格式参考`configure/proto/server_configure.proto`的ResourceConf。具体的磁盘文件路径可用`--resource_path`和`--resource_file`指定。样例如下：
 
 ```JSON
-model_manager_path: ./conf
-model_manager_file: model_toolkit.prototxt
+model_toolkit_path: "./conf"
+model_toolkit_file: "model_toolkit.prototxt"
+cube_config_file: "./conf/cube.conf"
 ```
 
-主要用来指定model_toolkit.prototxt路径
+其中：
+
+- model_toolkit_path:用来指定model_toolkit.prototxt所在的目录
+- model_toolkit_file: 用来指定model_toolkit.prototxt所在的文件名
+- cube_config_file: 用来指定cube配置文件所在路径与文件名
+
+Cube是Paddle Serving中用于大规模稀疏参数的组件。
 
 # 4. model_toolkit.prototxt
 
@@ -127,14 +126,18 @@ engines {
   runtime_thread_num: 0
   batch_infer_size: 0
   enable_batch_align: 0
+  sparse_param_service_type: LOCAL
+  sparse_param_service_table_name: "local_kv"
+  enable_memory_optimization: true
+  static_optimization: false
+  force_update_static_cache: false
 }
 ```
 
 其中
 
-name: 模型名称。InferManager通过此名称，找到要使用的模型和预测引擎。可参考serving/op/classify_op.h与serving/op/classify_op.cpp的InferManager::instance().infer()方法的参数来了解。
-
-type: 预测引擎的类型。可在inferencer-fluid-cpu/src/fluid_cpu_engine.cpp找到当前注册的预测引擎列表
+- name: 模型名称。InferManager通过此名称，找到要使用的模型和预测引擎。可参考serving/op/classify_op.h与serving/op/classify_op.cpp的InferManager::instance().infer()方法的参数来了解。
+- type: 预测引擎的类型。可在inferencer-fluid-cpu/src/fluid_cpu_engine.cpp找到当前注册的预测引擎列表
 
 |预测引擎|含义|
 |--------|----|
@@ -152,9 +155,8 @@ type: 预测引擎的类型。可在inferencer-fluid-cpu/src/fluid_cpu_engine.cp
 
 Analysis API在模型加载过程中，会对模型计算逻辑进行多种优化，包括但不限于zero copy tensor，相邻OP的fuse等。**但优化逻辑不是一定对所有模型都有加速作用，有时甚至会有反作用，请以实测结果为准**。
 
-reloadable_meta: 目前实际内容无意义，用来通过对该文件的mtime判断是否超过reload时间阈值
-
-reloadable_type: 检查reload条件：timestamp_ne/timestamp_gt/md5sum/revision/none
+- reloadable_meta: 目前实际内容无意义，用来通过对该文件的mtime判断是否超过reload时间阈值
+- reloadable_type: 检查reload条件：timestamp_ne/timestamp_gt/md5sum/revision/none
 
 |reloadable_type|含义|
 |---------------|----|
@@ -163,13 +165,22 @@ reloadable_type: 检查reload条件：timestamp_ne/timestamp_gt/md5sum/revision/
 |md5sum|目前无用，配置后永远不reload|
 |revision|目前无用，配置后用于不reload|
 
-model_data_path: 模型文件路径
-
-runtime_thread_num: 若大于0， 则启用bsf多线程调度框架，在每个预测bthread worker内启动多线程预测。要注意的是，当启用worker内多线程预测，workflow中OP需要用Serving框架的BatchTensor类做预测的输入和输出 (predictor/framework/infer_data.h, `class BatchTensor`)。
-
-batch_infer_size: 启用bsf多线程预测时，每个预测线程的batch size
-
-enable_batch_align:
+- model_data_path: 模型文件路径
+- runtime_thread_num: 若大于0， 则启用bsf多线程调度框架，在每个预测bthread worker内启动多线程预测。要注意的是，当启用worker内多线程预测，workflow中OP需要用Serving框架的BatchTensor类做预测的输入和输出 (predictor/framework/infer_data.h, `class BatchTensor`)。
+- batch_infer_size: 启用bsf多线程预测时，每个预测线程的batch size
+- enable_batch_align:
+- sparse_param_service_type: 枚举类型，可选参数，大规模稀疏参数服务类型
+
+|sparse_param_service_type|含义|
+|-------------------------|--|
+|NONE|不使用大规模稀疏参数服务|
+|LOCAL|单机本地大规模稀疏参数服务，以rocksdb作为引擎|
+|REMOTE|分布式大规模稀疏参数服务，以Cube作为引擎|
+
+- sparse_param_service_table_name: 可选参数，大规模稀疏参数服务承载本模型所用参数的表名。
+- enable_memory_optimization: bool类型，可选参数，是否启用内存优化。只在使用fluid Analysis预测API时有意义。需要说明的是，在GPU预测时，会执行显存优化
+- static_optimization: bool类型，是否执行静态优化。只有当启用内存优化时有意义。
+- force_update_static_cache: bool类型，是否强制更新静态优化cache。只有当启用内存优化时有意义。
 
 ## 5. 命令行配置参数
 

inferencer-fluid-cpu/include/fluid_cpu_engine.h

@@ -93,7 +93,7 @@ class FluidFamilyCore {
     return true;
   }
 
-  virtual int create(const std::string& data_path) = 0;
+  virtual int create(const predictor::InferEngineCreationParams& params) = 0;
 
   virtual int clone(void* origin_core) {
     if (origin_core == NULL) {
@@ -119,7 +119,8 @@ class FluidFamilyCore {
 // infer interface
 class FluidCpuAnalysisCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -131,6 +132,12 @@ class FluidCpuAnalysisCore : public FluidFamilyCore {
     analysis_config.SetProgFile(data_path + "/__model__");
     analysis_config.DisableGpu();
     analysis_config.SetCpuMathLibraryNumThreads(1);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
+
     analysis_config.SwitchSpecifyInputNames(true);
     AutoLock lock(GlobalPaddleCreateMutex::instance());
     _core =
@@ -147,7 +154,8 @@ class FluidCpuAnalysisCore : public FluidFamilyCore {
 
 class FluidCpuNativeCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -177,7 +185,8 @@ class FluidCpuNativeCore : public FluidFamilyCore {
 
 class FluidCpuAnalysisDirCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -189,6 +198,12 @@ class FluidCpuAnalysisDirCore : public FluidFamilyCore {
     analysis_config.DisableGpu();
     analysis_config.SwitchSpecifyInputNames(true);
     analysis_config.SetCpuMathLibraryNumThreads(1);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
+
     AutoLock lock(GlobalPaddleCreateMutex::instance());
     _core =
         paddle::CreatePaddlePredictor<paddle::AnalysisConfig>(analysis_config);
@@ -204,7 +219,8 @@ class FluidCpuAnalysisDirCore : public FluidFamilyCore {
 
 class FluidCpuNativeDirCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -380,7 +396,8 @@ class FluidCpuWithSigmoidCore : public FluidFamilyCore {
   virtual ~FluidCpuWithSigmoidCore() {}
 
  public:
-  int create(const std::string& model_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string model_path = params.get_path();
     size_t pos = model_path.find_last_of("/\\");
     std::string conf_path = model_path.substr(0, pos);
     std::string conf_file = model_path.substr(pos);
@@ -393,7 +410,9 @@ class FluidCpuWithSigmoidCore : public FluidFamilyCore {
     _core.reset(new SigmoidFluidModel);
 
     std::string fluid_model_data_path = conf.dnn_model_path();
-    int ret = load_fluid_model(fluid_model_data_path);
+    predictor::InferEngineCreationParams new_params(params);
+    new_params.set_path(fluid_model_data_path);
+    int ret = load_fluid_model(new_params);
     if (ret < 0) {
       LOG(ERROR) << "fail to load fluid model.";
       return -1;
@@ -442,7 +461,8 @@ class FluidCpuWithSigmoidCore : public FluidFamilyCore {
 
   virtual SigmoidFluidModel* get() { return _core.get(); }
 
-  virtual int load_fluid_model(const std::string& data_path) = 0;
+  virtual int load_fluid_model(
+      const predictor::InferEngineCreationParams& params) = 0;
 
   int softmax(float x, double& o) {  // NOLINT
     return _core->_sigmoid_core->softmax(x, o);
@@ -454,7 +474,8 @@ class FluidCpuWithSigmoidCore : public FluidFamilyCore {
 
 class FluidCpuNativeDirWithSigmoidCore : public FluidCpuWithSigmoidCore {
  public:
-  int load_fluid_model(const std::string& data_path) {
+  int load_fluid_model(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -483,7 +504,8 @@ class FluidCpuNativeDirWithSigmoidCore : public FluidCpuWithSigmoidCore {
 
 class FluidCpuAnalysisDirWithSigmoidCore : public FluidCpuWithSigmoidCore {
  public:
-  int load_fluid_model(const std::string& data_path) {
+  int load_fluid_model(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -495,6 +517,12 @@ class FluidCpuAnalysisDirWithSigmoidCore : public FluidCpuWithSigmoidCore {
     analysis_config.DisableGpu();
     analysis_config.SwitchSpecifyInputNames(true);
     analysis_config.SetCpuMathLibraryNumThreads(1);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
+
     AutoLock lock(GlobalPaddleCreateMutex::instance());
     _core->_fluid_core =
         paddle::CreatePaddlePredictor<paddle::AnalysisConfig>(analysis_config);

inferencer-fluid-gpu/include/fluid_gpu_engine.h

@@ -95,7 +95,7 @@ class FluidFamilyCore {
     return true;
   }
 
-  virtual int create(const std::string& data_path) = 0;
+  virtual int create(const predictor::InferEngineCreationParams& params) = 0;
 
   virtual int clone(void* origin_core) {
     if (origin_core == NULL) {
@@ -121,7 +121,8 @@ class FluidFamilyCore {
 // infer interface
 class FluidGpuAnalysisCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -133,7 +134,12 @@ class FluidGpuAnalysisCore : public FluidFamilyCore {
     analysis_config.SetProgFile(data_path + "/__model__");
     analysis_config.EnableUseGpu(100, FLAGS_gpuid);
     analysis_config.SetCpuMathLibraryNumThreads(1);
-    analysis_config.EnableMemoryOptim(false, false);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
+
     analysis_config.SwitchSpecifyInputNames(true);
 
     AutoLock lock(GlobalPaddleCreateMutex::instance());
@@ -151,7 +157,8 @@ class FluidGpuAnalysisCore : public FluidFamilyCore {
 
 class FluidGpuNativeCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -180,7 +187,8 @@ class FluidGpuNativeCore : public FluidFamilyCore {
 
 class FluidGpuAnalysisDirCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -192,7 +200,11 @@ class FluidGpuAnalysisDirCore : public FluidFamilyCore {
     analysis_config.EnableUseGpu(100, FLAGS_gpuid);
     analysis_config.SwitchSpecifyInputNames(true);
     analysis_config.SetCpuMathLibraryNumThreads(1);
-    analysis_config.EnableMemoryOptim(false, false);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
 
     AutoLock lock(GlobalPaddleCreateMutex::instance());
     _core =
@@ -209,7 +221,8 @@ class FluidGpuAnalysisDirCore : public FluidFamilyCore {
 
 class FluidGpuNativeDirCore : public FluidFamilyCore {
  public:
-  int create(const std::string& data_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -385,7 +398,8 @@ class FluidGpuWithSigmoidCore : public FluidFamilyCore {
   virtual ~FluidGpuWithSigmoidCore() {}
 
  public:
-  int create(const std::string& model_path) {
+  int create(const predictor::InferEngineCreationParams& params) {
+    std::string model_path = params.get_path();
     size_t pos = model_path.find_last_of("/\\");
     std::string conf_path = model_path.substr(0, pos);
     std::string conf_file = model_path.substr(pos);
@@ -398,7 +412,9 @@ class FluidGpuWithSigmoidCore : public FluidFamilyCore {
     _core.reset(new SigmoidFluidModel);
 
     std::string fluid_model_data_path = conf.dnn_model_path();
-    int ret = load_fluid_model(fluid_model_data_path);
+    predictor::InferEngineCreationParams new_params(params);
+    new_params.set_path(fluid_model_data_path);
+    int ret = load_fluid_model(new_params);
     if (ret < 0) {
       LOG(ERROR) << "fail to load fluid model.";
       return -1;
@@ -447,7 +463,8 @@ class FluidGpuWithSigmoidCore : public FluidFamilyCore {
 
   virtual SigmoidFluidModel* get() { return _core.get(); }
 
-  virtual int load_fluid_model(const std::string& data_path) = 0;
+  virtual int load_fluid_model(
+      const predictor::InferEngineCreationParams& params) = 0;
 
   int softmax(float x, double& o) {  // NOLINT
     return _core->_sigmoid_core->softmax(x, o);
@@ -459,7 +476,8 @@ class FluidGpuWithSigmoidCore : public FluidFamilyCore {
 
 class FluidGpuNativeDirWithSigmoidCore : public FluidGpuWithSigmoidCore {
  public:
-  int load_fluid_model(const std::string& data_path) {
+  int load_fluid_model(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -488,7 +506,8 @@ class FluidGpuNativeDirWithSigmoidCore : public FluidGpuWithSigmoidCore {
 
 class FluidGpuAnalysisDirWithSigmoidCore : public FluidGpuWithSigmoidCore {
  public:
-  int load_fluid_model(const std::string& data_path) {
+  int load_fluid_model(const predictor::InferEngineCreationParams& params) {
+    std::string data_path = params.get_path();
     if (access(data_path.c_str(), F_OK) == -1) {
       LOG(ERROR) << "create paddle predictor failed, path not exits: "
                  << data_path;
@@ -500,7 +519,12 @@ class FluidGpuAnalysisDirWithSigmoidCore : public FluidGpuWithSigmoidCore {
     analysis_config.EnableUseGpu(100, FLAGS_gpuid);
     analysis_config.SwitchSpecifyInputNames(true);
     analysis_config.SetCpuMathLibraryNumThreads(1);
-    analysis_config.EnableMemoryOptim(false, false);
+
+    if (params.enable_memory_optimization()) {
+      analysis_config.EnableMemoryOptim(params.static_optimization(),
+                                        params.force_update_static_cache());
+    }
+
     AutoLock lock(GlobalPaddleCreateMutex::instance());
     _core->_fluid_core =
         paddle::CreatePaddlePredictor<paddle::AnalysisConfig>(analysis_config);

predictor/framework/infer.h

@@ -29,6 +29,55 @@ namespace predictor {
 
 using configure::ModelToolkitConf;
 
+class InferEngineCreationParams {
+ public:
+  InferEngineCreationParams() {
+    _path = "";
+    _enable_memory_optimization = false;
+    _static_optimization = false;
+    _force_update_static_cache = false;
+  }
+
+  void set_path(const std::string& path) { _path = path; }
+
+  void set_enable_memory_optimization(bool enable_memory_optimization) {
+    _enable_memory_optimization = enable_memory_optimization;
+  }
+
+  bool enable_memory_optimization() const {
+    return _enable_memory_optimization;
+  }
+
+  void set_static_optimization(bool static_optimization = false) {
+    _static_optimization = static_optimization;
+  }
+
+  void set_force_update_static_cache(bool force_update_static_cache = false) {
+    _force_update_static_cache = force_update_static_cache;
+  }
+
+  bool static_optimization() const { return _static_optimization; }
+
+  bool force_update_static_cache() const { return _force_update_static_cache; }
+
+  std::string get_path() const { return _path; }
+
+  void dump() const {
+    LOG(INFO) << "InferEngineCreationParams: "
+              << "model_path = " << _path << ", "
+              << "enable_memory_optimization = " << _enable_memory_optimization
+              << ", "
+              << "static_optimization = " << _static_optimization << ", "
+              << "force_update_static_cache = " << _force_update_static_cache;
+  }
+
+ private:
+  std::string _path;
+  bool _enable_memory_optimization;
+  bool _static_optimization;
+  bool _force_update_static_cache;
+};
+
 class InferEngine {
  public:
   virtual ~InferEngine() {}
@@ -75,7 +124,7 @@ class ReloadableInferEngine : public InferEngine {
 
   typedef im::bsf::Task<Tensor, Tensor> TaskT;
 
-  virtual int load(const std::string& data_path) = 0;
+  virtual int load(const InferEngineCreationParams& params) = 0;
 
   int proc_initialize_impl(const configure::EngineDesc& conf, bool version) {
     _reload_tag_file = conf.reloadable_meta();
@@ -84,7 +133,31 @@ class ReloadableInferEngine : public InferEngine {
     _infer_thread_num = conf.runtime_thread_num();
     _infer_batch_size = conf.batch_infer_size();
     _infer_batch_align = conf.enable_batch_align();
-    if (!check_need_reload() || load(_model_data_path) != 0) {
+
+    bool enable_memory_optimization = false;
+    if (conf.has_enable_memory_optimization()) {
+      enable_memory_optimization = conf.enable_memory_optimization();
+    }
+
+    bool static_optimization = false;
+    if (conf.has_static_optimization()) {
+      static_optimization = conf.static_optimization();
+    }
+
+    bool force_update_static_cache = false;
+    if (conf.has_force_update_static_cache()) {
+      force_update_static_cache = conf.force_update_static_cache();
+    }
+
+    _infer_engine_params.set_path(_model_data_path);
+    if (enable_memory_optimization) {
+      _infer_engine_params.set_enable_memory_optimization(true);
+      _infer_engine_params.set_static_optimization(static_optimization);
+      _infer_engine_params.set_force_update_static_cache(
+          force_update_static_cache);
+    }
+
+    if (!check_need_reload() || load(_infer_engine_params) != 0) {
       LOG(ERROR) << "Failed load model_data_path" << _model_data_path;
       return -1;
     }
@@ -175,7 +248,7 @@ class ReloadableInferEngine : public InferEngine {
   int reload() {
     if (check_need_reload()) {
       LOG(WARNING) << "begin reload model[" << _model_data_path << "].";
-      return load(_model_data_path);
+      return load(_infer_engine_params);
     }
     return 0;
   }
@@ -243,6 +316,7 @@ class ReloadableInferEngine : public InferEngine {
 
  protected:
   std::string _model_data_path;
+  InferEngineCreationParams _infer_engine_params;
 
  private:
   std::string _reload_tag_file;
@@ -281,32 +355,35 @@ class DBReloadableInferEngine : public ReloadableInferEngine {
     return ReloadableInferEngine::proc_initialize(conf, version);
   }
 
-  virtual int load(const std::string& model_data_dir) {
+  virtual int load(const InferEngineCreationParams& params) {
     if (_reload_vec.empty()) {
       return 0;
     }
 
     for (uint32_t ti = 0; ti < _reload_vec.size(); ++ti) {
-      if (load_data(_reload_vec[ti], model_data_dir) != 0) {
+      if (load_data(_reload_vec[ti], params) != 0) {
         LOG(ERROR) << "Failed reload engine model: " << ti;
         return -1;
       }
     }
 
-    LOG(WARNING) << "Succ load engine, path: " << model_data_dir;
+    LOG(WARNING) << "Succ load engine, path: " << params.get_path();
 
     return 0;
   }
 
-  int load_data(ModelData<EngineCore>* md, const std::string& data_path) {
+  int load_data(ModelData<EngineCore>* md,
+                const InferEngineCreationParams& params) {
     uint32_t next_idx = (md->current_idx + 1) % 2;
     if (md->cores[next_idx]) {
       delete md->cores[next_idx];
     }
 
     md->cores[next_idx] = new (std::nothrow) EngineCore;
-    if (!md->cores[next_idx] || md->cores[next_idx]->create(data_path) != 0) {
-      LOG(ERROR) << "Failed create model, path: " << data_path;
+
+    params.dump();
+    if (!md->cores[next_idx] || md->cores[next_idx]->create(params) != 0) {
+      LOG(ERROR) << "Failed create model, path: " << params.get_path();
       return -1;
     }
     md->current_idx = next_idx;
@@ -321,8 +398,9 @@ class DBReloadableInferEngine : public ReloadableInferEngine {
     }
 
     ModelData<EngineCore>* md = new (std::nothrow) ModelData<EngineCore>;
-    if (!md || load_data(md, _model_data_path) != 0) {
-      LOG(ERROR) << "Failed create thread data from " << _model_data_path;
+    if (!md || load_data(md, _infer_engine_params) != 0) {
+      LOG(ERROR) << "Failed create thread data from "
+                 << _infer_engine_params.get_path();
       return -1;
     }
 
@@ -383,17 +461,16 @@ class CloneDBReloadableInferEngine
     return DBReloadableInferEngine<EngineCore>::proc_initialize(conf, version);
   }
 
-  virtual int load(const std::string& model_data_dir) {
+  virtual int load(const InferEngineCreationParams& params) {
     // 加载进程级模型数据
     if (!_pd ||
-        DBReloadableInferEngine<EngineCore>::load_data(_pd, model_data_dir) !=
-            0) {
-      LOG(ERROR) << "Failed to create common model from [" << model_data_dir
+        DBReloadableInferEngine<EngineCore>::load_data(_pd, params) != 0) {
+      LOG(ERROR) << "Failed to create common model from [" << params.get_path()
                  << "].";
       return -1;
     }
     LOG(WARNING) << "Succ load common model[" << _pd->cores[_pd->current_idx]
-                 << "], path[" << model_data_dir << "].";
+                 << "], path[" << params.get_path() << "].";
 
     if (DBReloadableInferEngine<EngineCore>::_reload_vec.empty()) {
       return 0;
@@ -409,7 +486,7 @@ class CloneDBReloadableInferEngine
       }
     }
 
-    LOG(WARNING) << "Succ load clone model, path[" << model_data_dir << "]";
+    LOG(WARNING) << "Succ load clone model, path[" << params.get_path() << "]";
 
     return 0;
   }

predictor/framework/resource.cpp

@@ -110,12 +110,6 @@ int Resource::cube_initialize(const std::string& path,
   }
 
   int err = 0;
-  std::string cube_config_path = resource_conf.cube_config_path();
-  if (err != 0) {
-    LOG(ERROR) << "reade cube_config_path failed, path[" << path << "], file["
-               << cube_config_path << "]";
-    return -1;
-  }
   std::string cube_config_file = resource_conf.cube_config_file();
   if (err != 0) {
     LOG(ERROR) << "reade cube_config_file failed, path[" << path << "], file["
@@ -124,8 +118,8 @@ int Resource::cube_initialize(const std::string& path,
   }
   err = CubeAPI::instance()->init(cube_config_file.c_str());
   if (err != 0) {
-    LOG(ERROR) << "failed initialize cube, config: " << cube_config_path << "/"
-               << cube_config_file << " error code : " << err;
+    LOG(ERROR) << "failed initialize cube, config: " << cube_config_file
+               << " error code : " << err;
     return -1;
   }