- 27 4月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 4月, 2021 1 次提交
-
-
由 Joel Peshkin 提交于
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: NJoel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 10 4月, 2021 1 次提交
-
-
由 Tom Rini 提交于
The mvsata_ide driver was due for DM conversion by v2019.07. As that has long passed, remove the driver and disable it in the boards which had enabled it. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 4月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 4月, 2021 1 次提交
-
-
由 Simon Glass 提交于
This bash code is currently showing up in the build unless 'make -s' is used. We don't normally show these sorts of things as they are confusing. Also this code was not shown before the recent refactoring of how these messages are displayed. Add an '@' to silence it. Suggested-by: NTom Rini <trini@konsulko.com> Signed-off-by: NSimon Glass <sjg@chromium.org> Reported-by: NBin Meng <bmeng.cn@gmail.com> Fixes: 13732528 ("Makefile: Add common code to report deprecation")
-
- 30 3月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 3月, 2021 1 次提交
-
-
由 Jessica Clarke 提交于
On Arm-based Macs, -no_pie is ignored and gives a linker warning. Moreover, the build falls over with: ld: Absolute addressing not allowed in arm64 code but used in '_image_type_ptr_aisimage' referencing '_image_type_aisimage' for dumpimage and mkimage, since we put data structs in text sections not data sections and so cannot have dynamic relocations. Instead, move the sections to __DATA and drop disabling PIE. Signed-off-by: NJessica Clarke <jrtc27@jrtc27.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 27 3月, 2021 13 次提交
-
-
由 Simon Glass 提交于
This probably should have been done a while back since it is a core system. Add a migration deadline of later this year, to catch the stragglers. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This message does not seem to make sense. It may be out of date. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_DM_ETH check to use the 'deprecated' function. Tested with snow Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_WDT check to use the 'deprecated' function. Tested with kmcent2 Old message: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_WDT (Driver Model for DM watchdog). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_DM_SPI_FLASH check to use the 'deprecated' function. Tested with vinco Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH (Driver Model for SPI flash). Please update the board to use CONFIG_DM_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_DM_VIDEO check to use the 'deprecated' function. Tested with pxm2 Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO (Driver Model for video). Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_DM_PCI check to use the 'deprecated' function. Tested with MPC8349ITX Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_PCI Please update the board to use CONFIG_DM_PCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_PCI (Driver Model for PCI). Please update the board to use CONFIG_DM_PCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_LIBATA check to use the 'deprecated' function. Tested with MPC8349ITX Old message: ===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_AHCI (Driver Model for AHCI). Please update the board to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the CONFIG_MVSATA_IDE check to use the 'deprecated' function. Tested with nas220 Old message: ===================== WARNING ====================== This board does use CONFIG_MVSATA_IDE which is not ported to driver-model (DM) yet. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_AHCI (Driver Model for AHCI instead of CONFIG_MVSATA_IDE). Please update the board to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the USB check to use the 'deprecated' function. Tested with xpress Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB (Driver Model for USB). Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the MMC check to use the 'deprecated' function. Tested with zc5202 Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC (Driver Model for MMC). Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a function which can be called to report a migration problem. This will make it easier to add new migration checks, since the logic and strings are not spread out over 8 lines of code. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the driver model migration messages are mixed with the others. Collect them together before starting to refactor them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 26 3月, 2021 1 次提交
-
-
由 Simon Glass 提交于
To support the use of 'expanded' entries, binman needs to be told whether SPL and TPL have a devicetree and whether they need BSS padding. Add these to the Makefile. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 22 3月, 2021 1 次提交
-
-
由 Heinrich Schuchardt 提交于
UEFI test files like helloworld.efi require an architecture specific PE-COFF header. Currently this does not work for cross compiling. If $CROSS_COMPILE is set, use the first part of the architecture triplet from the variable to choose the PE-COFF header. Now we can cross-compile the sandbox, e.g. make sandbox_defconfig NO_SDL=1 CROSS_COMPILE=/opt/bin/aarch64-linux-gnu- NO_SDL=1 MK_ARCH=aarch64 make Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 21 3月, 2021 1 次提交
-
-
由 Weijie Gao 提交于
This patch makes use of the decompression mechanism implemented for mt7628 previously to reduce the total image size. Binman will be also removed. Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
- 16 3月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 3月, 2021 1 次提交
-
-
由 Dalon Westergreen 提交于
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: NDalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: NSiew Chin Lim <elly.siew.chin.lim@intel.com>
-
- 03 3月, 2021 2 次提交
-
-
由 Pali Rohár 提交于
musb udc code depends on usb gadget code provided by CONFIG_USB_DEVICE as defined in drivers/usb/gadget/Makefile. But this Makefile is not included into U-Boot build when CONFIG_USB_GADGET is not set. As CONFIG_USB_DEVICE cannot be enabled together with CONFIG_USB_GADGET it means that dependency for musb udc code is not compiled during build. Fix it by including drivers/usb/gadget dependency also when CONFIG_USB_DEVICE is set. This patch fixes compile errors: arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_ep0_rx': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `ep0_recv_setup' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_ep0_idle': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `ep0_recv_setup' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_ep0_zero_data_request': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_ep0_idle': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `ep0_recv_setup' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_ep0_rx': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_rcv_complete' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `musb_peri_rx_ep': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_rcv_complete' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `udc_endpoint_write': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_tx_complete' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `udc_irq': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o:u-boot/drivers/usb/musb/musb_udc.c: more undefined references to `usbd_device_event_irq' follow arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `udc_setup_ep': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_alloc_urb' arm-linux-gnueabi-ld.bfd: drivers/usb/musb/built-in.o: in function `udc_startup_events': u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' arm-linux-gnueabi-ld.bfd: u-boot/drivers/usb/musb/musb_udc.c: undefined reference to `usbd_device_event_irq' make: *** [Makefile:1762: u-boot] Error 1 Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NLukasz Majewski <lukma@denx.de> Acked-by: NPavel Machek <pavel@ucw.cz>
-
由 Simon Glass 提交于
Add notes about how to make binman produce verbose logging when building. Add a comment on how to do this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 02 3月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 3月, 2021 1 次提交
-
-
由 Marek Vasut 提交于
The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim. The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE is enabled, the u-boot.bin does not contain control DT for U-Boot, and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx does not contain the DT, and a system where u-boot-with-spl.imx is written to offset 1024B to the start of storage no longer boots, as it is missing DT. In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim to generate u-boot-with-spl.imx when OF_SEPARATE is enabled. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
-
- 25 2月, 2021 1 次提交
-
-
由 Klaus Heinrich Kiwi 提交于
U-boot allows the default device tree to be overridden from the build environment using the DEVICE_TREE variable. Make sure that we include it in the SPL FIT mkimage build step. This also fixes a broken image in case CONFIG_OF_LIST and CONFIG_OF_OVERLAY_LIST are unset (i.e., expected to be supplied by the DEVICE_TREE env var). Signed-off-by: NKlaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
-
- 16 2月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 2月, 2021 1 次提交
-
-
由 Simon Glass 提交于
For SMBIOS we want to store the numeric version numbers in the tables. It does not make sense to parse the strings. Instead, add new #defines with the version and patchlevel. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 01 2月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 1月, 2021 1 次提交
-
-
由 Pali Rohár 提交于
Macro 'cmd_objcopy_uboot' currently does not work with passed empty command expanded from 'cmd_static_rela' and therefore dummy command 'true' is set in 'cmd_static_rela' to workaround this issue. Eliminate it now by fixing 'cmd_objcopy_uboot' macro to work also with empty 'cmd_static_rela' macro and remove useless invocation of command 'true'. Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 15 1月, 2021 1 次提交
-
-
由 Ley Foon Tan 提交于
The existing socfpgaimage always pads the image to the maximum size of OCRAM size. This will break in the encryption flow where it expects the image to be un-padded. The encryption tool will do the encryption for the whole image and append the signature key at end of the image. The signature key will append to beyond the size of OCRAM if the image is padded with the maximum size before encryption. Move the padding step from socfpgaimage to Makefile and pads with objcopy command. socfpgaimage will pad the image with 16 bytes aligned (including CRC word), this is a requirement in encryption flow. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
- 12 1月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 1月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 22 12月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 12月, 2020 2 次提交
-
-
由 Pali Rohár 提交于
On more places is used pattern 'command > $@ || rm -f $@'. But it does not propagate failure from 'command' as 'rm -f' returns success. Fix it by calling 'false' to correctly propagate failure after 'rm -f'. Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-