Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Update the configuration files to support the device tree and driver
model. The peripheral clock and pins configuration are handled by
the clock and the pinctrl drivers respectively.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

To support driver model and device tree, use the SPI-flash-based
AT45xxx DataFlash driver, DataFlash is a kind of SPI flash.
Instead of ATMEL_DATAFLASH_SPI DataFlash older driver that will
be removed in the future.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.

Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Strings read from devices may sometimes fail to be
NULL-terminated.   The functions in lib/string.c are subject to
failure in this case.   Protect against observed failures in
set_gpt_info() by switching to length-checking variants with a length
limit of the maximum possible partition table length.  At the same
time, add a few checks for NULL string pointers.

Here is an example as observed in sandbox under GDB:

    => gpt verify host 0 $partitions
    Program received signal SIGSEGV, Segmentation fault.
    0x0000000000477747 in strlen (s=0x0) at lib/string.c:267
    267             for (sc = s; *sc != '\0'; ++sc)
    (gdb) bt
    #0  0x0000000000477747 in strlen (s=0x0) at lib/string.c:267
    #1  0x00000000004140b2 in set_gpt_info (str_part=<optimized out>,
    str_disk_guid=str_disk_guid@entry=0x7fffffffdbe8, partitions=partitions@entry=0x7fffffffdbd8,
    parts_count=parts_count@entry=0x7fffffffdbcf "", dev_desc=<optimized out>) at cmd/gpt.c:415
    #2  0x00000000004145b9 in gpt_verify (str_part=<optimized out>, blk_dev_desc=0x7fffef09a9d0) at cmd/gpt.c:580
    #3  do_gpt (cmdtp=<optimized out>, flag=<optimized out>, argc=<optimized out>, argv=0x7fffef09a8f0)
    at cmd/gpt.c:783
    #4  0x00000000004295b0 in cmd_call (argv=0x7fffef09a8f0, argc=0x5, flag=<optimized out>,
    cmdtp=0x714e20 <_u_boot_list_2_cmd_2_gpt>) at common/command.c:500
    #5  cmd_process (flag=<optimized out>, argc=0x5, argv=0x7fffef09a8f0,
    repeatable=repeatable@entry=0x726c04 <flag_repeat>, ticks=ticks@entry=0x0) at common/command.c:539
Suggested-by: NLothar Waßmann <LW@karo-electronics.de>
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

This patch provides support in u-boot for renaming GPT
partitions.  The renaming is accomplished via new 'gpt swap'
and 'gpt rename' commands.

The 'swap' mode returns an error if no matching partition names
are found, or if the number of partitions with one name does not equal
the number with the second name.   The 'rename' variant always
succeeds as long as a partition with the provided number exists.

Rewriting the partition table has the side-effect that all partitions
end up with "msftdata" flag set.  The reason is that partition type
PARTITION_BASIC_DATA_GUID is hard-coded in the gpt_fill_pte()
function.  This does not appear to cause any harm.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Make the partition table available for modification by reading it from
the user-specified device into a linked list.   Provide an accessor
function for command-line testing.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>
[trini: Make this depend on CMD_GPT_RENAME, as it is the user of this
code]
Signed-off-by: NTom Rini <trini@konsulko.com>

In order to read the GPT, modify the partition name strings, and then
write out a new GPT, the disk GUID is needed.  While there is an
existing accessor for the partition UUIDs, there is none yet for the
disk GUID.

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Move MAX_SEARCH_PARTITIONS to part.h so that functions in cmd
directory can find it.  At the same time, increase the value to
64 since some operating systems use many, and the resources
consumed by a larger value are minimal.

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Make minor changes to README.gpt and sandbox_defconfig to support
testing of the gpt command's functionality in the sandbox.

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

The existing partitions-list parsing in cmd/gpt.c passes a value
from gpt_default() to set_gpt_info() that README.gpt suggests
should begin with 'partitions='.  Partition-list strings should
in fact begin with 'uuid_disk', as otherwise the call from
set_gpt_info() to extract_val() to find 'uuid_disk' will fail.
Change README.gpt accordingly.

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Changes since v6: none.
Signed-off-by: NAlison Chaiken <alison@peloton-tech.com>

Xilinx changes for v2017.09

Zynq:
- Add Z-Turn board support

fpga:
- Remove intermediate buffer from code

Zynqmp:
- dts cleanup
- change psu_init handling
- Add options to get silicon version
- Fix time handling
- Map OCM/TCM via MMU
- Add new clock driver

With the changes to fdt_get_base_address() we need to modify the logic
in ft_verify_fdt() for how we check the validity of the CCSR address.

Tested-on: qemu-ppce500 -M mpc8544ds
Fixes: 336a4487 ("fdt: Correct fdt_get_base_address()")
Cc: York Sun <york.sun@nxp.com>
Cc: Wolfgang Denk <wd@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>

The logic of what fdt_get_base_address() will search for and return has
changed.  Rework get_phys_ccsrbar_addr_early() to perform the logic that
fdt_get_base_address used to perform.

Fixes: 336a4487 ("fdt: Correct fdt_get_base_address()")
Reviewed-by: NSimon Glass <sjg@chromium.org>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NTom Rini <trini@konsulko.com>

ahci_probe_scsi() now takes a 'base' argument, and there is an API
that prepares base address for us: ahci_probe_scsi_pci().
Reported-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

This updates defconfig of R-Car Gen3 to keep with the latest Kconfig.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add support for enabling and disabling the clock using the clock
framework based on the content of OF instead of doing it manually
in the board file.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The order of parameters passed to the phy_connect() was wrong.
Moreover, only PHY address 0 was used. Replace this with code
capable of detecting the PHY address.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add support for probing the RAVB Ethernet block from device tree.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Since we now have clock driver on the RCar Gen3 , obtain the clock
configuration using the clock framework functions. In case this
fails, fall back to the original code for pulling the clock config
directly out of OF.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Since there is now a clock driver for RCar Gen3, enable it on this board.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Since there is now a clock driver for RCar Gen3, enable it on this board.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add clock driver for the RCar Gen3 R8A7795 and R8A7796 SoCs .
This driver allows reading out the clock configuration set by
previous boot stages and enabling and disabling clock using
the MSTP registers. Setting clock is not supported thus far.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Since the DTs are now in place, enable OF control so that they get
bundled into the U-Boot.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.12-rc6,
commit 6f7da290413ba713f0cdd9ff1a2a9bb129ef4f6c . This includes both M3
and H3 ULCB and Salvator-X boards.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Allow pasting extra long lines into the U-Boot console on RCar Gen3.
This is OK since we have plenty of resources and it's convenient.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add initial support for the R8A7795 and R8A7796 based ULCB board.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add the PFC5 PUEN address and SSI SDATA4 bit offset into the
rcar-gen3-base.h .
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NTom Rini <trini@konsulko.com>

Conflicts:
	include/configs/ls1046aqds.h
	include/configs/ls1046ardb.h

strncat(a, b, c) appends a maximum of c characters plus the 0 byte
to a.

In board_init we first write 4 characters plus 0 byte to version.
So only ZYNQMP_VERSION_SIZE - 5 additional characters fit into
version.

The problem was indicated by cppcheck.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Modify chip_id() routine such that to handle based on
the current el. Also make it available even if FPGA is
not enabled in system such it can be used always.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>