DM644x is just one of a series of DaVinci chips that use the EMAC driver.
By replacing all the function names that start with dm644x_* to davinci_*
we make these function more portable. I have tested this change on my EVM.
DM6467 is another DaVinci SOC which uses the EMAC driver and i will
be sending patches that add DaVinci DM6467 support to the list soon.
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

The only board using this driver is the SL8245 board.
Removed initialization for the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The only board using this driver is the Freescale MPC8610HPCD board.
Removed initialization for the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Added board_eth_init() function to bf537-stamp board.
Removed initialization for the Blackin EMAC driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Added a cpu_eth_init() function to leon2/leon3 CPU directories and
removed code from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Added a cpu_eth_init() function to coldfire CPU directories and
removed code from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
removed code from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Renamed initialization functions for atngw100 and atstk1000.
Removed initializations for these boards from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
board.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.
Signed-off-by: NStelian Pop <stelian@popies.net>

AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.
Signed-off-by: NStelian Pop <stelian@popies.net>

GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.

If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can be determined by a bit in the control register.
The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch fixes a problem seen on PPC4xx boards, when no MAC address is
defined. Then no ethernet interface is available but a simple "tftp"
command will return without any error message which is quite confusing.
Signed-off-by: NStefan Roese <sr@denx.de>

This patch fixes a problem seen on PPC4xx boards, when no MAC address is
defined. Then no ethernet interface is available but a simple "tftp"
command will return without any error message which is quite confusing.
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NStelian Pop <stelian@popies.net>

Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>

[PATCH] net: add 'ethrotate' environment variable

This patch replaces the buildtime configuration option
CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
configuration veriable. See README.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch extends the number of supported UECs to 4. Note that the
problem of QE thread resources exhaustion is resolved by setting the
correct number of QE threads according to Ethernet type (GBE or FE).
Signed-off-by: NDavid Saada <david.saada@ecitele.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Change return values of init() functions in all Ethernet drivers to conform
to the following:

    >=0: Success
    <0:  Failure

All drivers going forward should return 0 on success.  Current drivers that
return 1 on success were left as-is to minimize changes.
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Acked-By: NTimur Tabi <timur@freescale.com>

Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>

This patch modifies the return code handling in the eth_init()
function, to be compatible with the handling of the return codes in
the other network stack files. It now returns a 0 on Success and -1 on
error.
Signed-off-by: NUpakul Barkakaty <upakul.barkakaty@conexant.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
warned as below:

  U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)

  DRAM:  256 MB
  Flash: 32 MB
  In:    serial
  Out:   serial
  Err:   serial
  Net:   NEC-Candy
  Warning: NEC-Candy MAC addresses don't match:
  Address in SROM is         00:00:4C:80:92:A2
  Address in environment is  FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21

This patch changes env_enetaddr type from `char' to `unsigned char'.

Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The purpose of this routine is receiving a single network frame, outside of
U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
U-Boot will let them utilise networking facilities. For sending a raw frame
the already existing eth_send() can be used.

The direct consumer of this routine is the newly introduced API layer for
external applications (enabled with CONFIG_API).
Signed-off-by: NRafal Jaworowski <raj@semihalf.com>
Signed-off-by: NPiotr Kruszynski <ppk@semihalf.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This patch implements general ULi 526x Ethernet driver.
Until now, it is the only native Ethernet port on
MPC8610HPCD board, but it could be used on other boards
with ULi 526x Ethernet port as well.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Acked-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NBen Warren <bwarren@qstreams.com>

Implemented IETF RFC2090, Multicast TFTP.  Initial implementation
on Realtek RTL8139 and Freescale TSEC.
Signed-off-by: NDavid Updegraff <dave@cray.com>
Signed-off-by: NBen Warren <bwarren@qstreams.com>

Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >
Signed-off-by: NSergey Kubushyn <ksi@koi8.net>
Acked-by: NDirk Behme <dirk.behme@gmail.com>
Acked-by: NZach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: NStefan Roese <sr@denx.de>

The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog
Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: NRafal Jaworowski <raj@semihalf.com>
Signed-off-by: NJan Wrobel <wrr@semihalf.com>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Added mcffec_initialize() in eth_initialize()
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NJon Loeliger <jdl@freescale.com>

This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: NJon Loeliger <jdl@freescale.com>

                - Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM
Signed-off-by: NHeiko Schocher <hs@denx.de>

Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c

Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Implement MACB initialization for AVR32 and ATSTK1000, and turn
everything on, including the MACB driver.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>