- 10 8月, 2019 12 次提交
-
-
由 Dominik Sliwa 提交于
Display proper reset reason after the SoC info. Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Disabling ASPM fixes incompatibilities with some PCIe cards Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Use unified values for USB Product/Vendor numbers when the config block is missing Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1 modules. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
By keeping RESET_MOCI_CTRL low we avoid explicitly releasing RESET_MOCI#. Please note that module hardware versions up to V1.1A will already release RESET_MOCI# in hardware coming out of reset. Please further note that with this change the USB hub on the Apalis Evaluation board is kept in reset in U-Boot and therefore none of its ports are operational in U-Boot. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
We never really added a sensible DFU configuration for platforms based on eMMC. Most of the things one might want to do can also be done with UMS or fastboot, so drop the DFU configuration. Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NPhilippe Schenker <philippe.schenker@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Trent Piepho 提交于
This is a configuration option specific to the tegra controller. Doing it this way makes it show up directly under the tegra controller option, indented one level, as "Disable external clock loopback". The way it is now, it shows up at the end of the controller list, not indented, as if it's some kind of generic MMC configuration option. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: NTrent Piepho <tpiepho@impinj.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
For U-Boot we allow a GPIO to be specified to enable the codec. Add this to the relevant binding files. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NJon Hunter <jonathanh@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 09 8月, 2019 12 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc由 Tom Rini 提交于
- mmc test fix - sdhci driver fix
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Matthias Brugger <mbrugger@suse.com> Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com> Tested-by: NEugen Hristev <eugen.hristev@microchip.com>
-
由 Michal Simek 提交于
Test is using random command which has own Kconfig symbol CMD_RANDOM which already depends on CMD_MEMORY. That's why replace cmd_memory by cmd_random. Fixes: 09da18de ("test/py: add MMC/SD block write test") Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Matwey V. Kornilov 提交于
Since commit 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. [this patch is based on commit 41a9fab8 ("mmc: mv_sdhci: fix uninitialized pointer deref on probe") by Baruch Siach] Fixes: 3d296365 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: NMatwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu102/zc706)
-
由 Faiz Abbas 提交于
Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being done for the U-boot case. Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
- 08 8月, 2019 16 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
-
由 Sam Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Tom Rini 提交于
- Misc Android / AVB bugfixes (including updating the header from Android). - MediaTek updates - Other assorted bugfixes.
-
由 Alex Deymo 提交于
This takes the latest changes from AOSP from the file include/bootimg/bootimg.h from the repository: https://android.googlesource.com/platform/system/tools/mkbootimg and update the U-Boot version with the latest changes. This file keeps the changes from AOSP to a minimum: * Comments were converted from C++ to C style. * Code inside __cplusplus #ifdef blocks were removed. * C++11 struct extensions replaced with a single struct. Signed-off-by: NAlex Deymo <deymo@google.com> Reviewed-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Sam Protsenko 提交于
Do not attempt to print fdt info if root node wasn't found. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Julius Werner 提交于
The Linux ramdisk should always be decompressed by the kernel itself, not by U-Boot. Therefore, the 'compression' node in the FIT image should always be set to "none" for ramdisk images, since the only point of using that node is if you want U-Boot to do the decompression itself. Yet some systems populate the node to the compression algorithm used by the kernel instead. This used to be ignored, but now that we support decompression of all image types it becomes a problem. Since ramdisks should never be decompressed by U-Boot anyway, this patch adds a special exception for them to avoid these issues. Still, setting the 'compression' node like that is wrong in the first place, so we still want to print out a warning so that third-party distributions doing this can notice and fix it. Signed-off-by: NJulius Werner <jwerner@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de> Tested-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Patrick Delaunay 提交于
Avoid to flush buffer when silent console is activated as the console can be reactivate later, after relocation, when the env will be updated with the saved one. Solve issue (missing beginning of U-Boot trace) when: - CONFIG_SILENT_CONSOLE is activated - silent=1 is defined in default environment (CONFIG_EXTRA_ENV_SETTINGS) - silent is removed in saved environment with: > env delete silent; env save Only functional when PRE_CONSOLE_BUFFER is activated. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrick Delaunay 提交于
Update the "silent" property with the variable "silent" get from saved environment, it solves the issue when: - CONFIG_SILENT_CONSOLE and CONFIG_SYS_CONSOLE_IS_IN_ENV are activated - silent is not defined in default environment - silent is requested in saved environment with: > env set silent 1; env save On next reboot the console is not disabled as expected after relocation and the environment load from flash (the callback is not called when the INSERT is requested in the created hash table) Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Sam Protsenko 提交于
When building U-Boot with AVB enabled, compiler shows next warnings: cmd/avb.c: In function 'do_avb_read_pvalue': cmd/avb.c:371:18: warning: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Wformat=] printf("Read %ld bytes, value = %s\n", bytes_read, ~~^ ~~~~~~~~~~ %d cmd/avb.c: In function 'do_avb_write_pvalue': cmd/avb.c:404:19: warning: format '%ld' expects argument of type 'long int', but argument 2 has type '__kernel_size_t' {aka 'unsigned int'} [-Wformat=] printf("Wrote %ld bytes\n", strlen(value) + 1); ~~^ ~~~~~~~~~~~~~~~~~ %d Fix those by using "%zu" specified. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NIgor Opaniuk <igor.opaniuk@gmail.com>
-
由 Sam Protsenko 提交于
When having only these AVB related configs enabled: CONFIG_AVB_VERIFY=y CONFIG_CMD_AVB=y CONFIG_LIBAVB=y build fails with next errors: common/avb_verify.c: In function 'read_persistent_value': common/avb_verify.c:867:6: warning: implicit declaration of function 'get_open_session' common/avb_verify.c:870:45: error: 'struct AvbOpsData' has no member named 'tee' common/avb_verify.c:894:7: warning: implicit declaration of function 'invoke_func' common/avb_verify.c: In function 'write_persistent_value': common/avb_verify.c:931:45: error: 'struct AvbOpsData' has no member named 'tee' Guard read_persistent_value() and write_persistent_value() functions by checking if CONFIG_OPTEE_TA_AVB is enabled (as those are only used in that case) to fix the build with mentioned configuration. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> Reviewed-by: NIgor Opaniuk <igor.opaniuk@gmail.com>
-
由 Ramon Fried 提交于
Fix the following Coverity warning: CID 244086: Incorrect expression (BAD_COMPARE) Comparing pointer "ep_bar" against NULL using anything besides == or is likely to be incorrect. Fixes: 914026d2 ("drivers: pci_ep: Introduce UCLASS_PCI_EP uclass") Signed-off-by: NRamon Fried <rfried.dev@gmail.com>
-
由 Ryder Lee 提交于
This adds high speed interface subsystem - hifsys (i.e. PCIe and USB) for MT7623 SoC and enables its reset controller. The control block is shared with ethsys and accordingly rename the related defines. Tested-by: NFrank Wunderlich <frank-w@public-files.de> Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Ryder Lee 提交于
This adds missing hifsys reset parts in header files. Tested-by: NFrank Wunderlich <frank-w@public-files.de> Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Ryder Lee 提交于
Add MediaTek team as designated reviewer. Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Heiko Schocher 提交于
if CONFIG_AUTOBOOT_KEYED, CONFIG_AUTOBOOT_ENCRYPTION and CONFIG_AUTOBOOT_STOP_STR_SHA256 are enabled in conjunction with CONFIG_SHA_HW_ACCEL and CONFIG_FSL_CAAM, we get the Error when pressing a key while waiting for bootdelay: Error: Address arguments are not aligned CAAM was not setup properly or it is faulty Reason is, that used variables are not cache aligned, so malloc this variables cache aligned. Probably this is also a bugfix for other hw accelerators than CAAM. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heinrich Schuchardt 提交于
Provide a concise description of the assert() macro. Point out that the tested expression is always executed, irrespective of the value of _DEBUG. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-