- 05 6月, 2008 4 次提交
-
-
由 Remy Bohmer 提交于
According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the reset procedure must be done twice to properly reset the DM9000 by means of software. This errata is not needed anymore for the DM9000A, but it does not bother it. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Remy Bohmer 提交于
The eth_send routine of the U-boot DM9000x driver does not match the DM9000 or DM9000A application notes/programming guides. This change improves the stability of the DM9000A network controller. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Remy Bohmer 提交于
It seems that the debugging code of the DM9000x driver in U-boot has not been compiled for a long time, because it cannot compile... Also rearranged some loglines to get more useful info while debugging. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Remy Bohmer 提交于
The U-boot DM9000x driver contains a compile time bus-width definition for the databus connected to the network controller. This compile check makes the code unclear, inflexible and is unneccessary. It can be asked to the network controller what its bus-width is by reading bits 6 and 7 of the interrupt status register. The linux kernel already uses a runtime mechanism to determine this bus-width, so the implementation below looks somewhat like that implementation. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 03 6月, 2008 3 次提交
-
-
-
由 Wolfgang Grandegger 提交于
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 TsiChung Liew 提交于
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 27 5月, 2008 5 次提交
-
-
由 Wolfgang Denk 提交于
Conflicts: include/configs/socrates.h Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
In case of several PCI USB controllers on a board this variable specifys which controller to use. See doc/README.generic_usb_ohci for details. Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
- 24 5月, 2008 1 次提交
-
-
由 Ron Madrid 提交于
Signed-off-by: NRon Madrid <ron_madrid@sbcglobal.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 23 5月, 2008 1 次提交
-
-
由 Jens Gehrlein 提交于
Signed-off-by: NJens Gehrlein <sew_s@tqs.de> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 22 5月, 2008 3 次提交
-
-
由 Christian Eggers 提交于
Signed-off-by: NChristian Eggers <ceggers@gmx.de> Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Christian Eggers 提交于
Signed-off-by: NChristian Eggers <ceggers@gmx.de> Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Sergei Poselenov 提交于
Add new configuration variable CONFIG_PCI_OHCI_DEVNO. In case of several PCI USB controllers on a board this variable specifys which controller to use. Also add USB support for sokrates board. See doc/README.generic_usb_ohci for details. Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
- 21 5月, 2008 20 次提交
-
-
-
由 Wolfgang Denk 提交于
introduced by 53677ef1 "Big white-space cleanup." Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 York Sun 提交于
Reuse the existing DIU driver in board/freescale/common. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Add DIU and cfb console support to FSL 5121ADS board. Use #define CONFIG_VIDEO in config file to enable fb console. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Remove DPRINTF macro and replace it with generic debug macro. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
The clock divider has different format in 5121 and 8610. This patch moves it to board specific code. Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Wolfgang Denk 提交于
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Yuri Tikhonov 提交于
POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags. This way we become able to utilize the full post_log_word for POST activities (overwise, POST ECC, which has 0x8000 ID, could be erroneously treated as started in post_output_backlog() even if there was actually no POST ECC run (because of OCM POST failure, for example). Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
-
由 Yuri Tikhonov 提交于
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
由 Yuri Tikhonov 提交于
Don't run futher tests in case of a test fails that is marked as POST_STOP. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
-
由 Yuri Tikhonov 提交于
Switch the OCM testid with the codec one. The reason is that current implementation requires the POST_ROM testid to fit into lower 16 bits, and the codec test will never run with POST_ROM hopefully. Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
由 Yuri Tikhonov 提交于
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
由 Yuri Tikhonov 提交于
Added OCM test to POST layer. This version runs before all other tests but doesn't yet interrupt post sequence on failure. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
-
由 Yuri Tikhonov 提交于
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
-
- 20 5月, 2008 2 次提交
-
-
由 Hebbar 提交于
Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
-
由 York Sun 提交于
Change LCRR clock ratio from 2 to 4 to commodate VSC7385. Correct TSEC1 vs TSEC2 assignment. Define ETHADDR and ETH1ADDR always. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com>
-
- 19 5月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Update CHANGELOG for release. Signed-off-by: NWolfgang Denk <wd@denx.de>
-